cop used for sale

Offer 26334 Technical data: - Operating hours 28407 h - Operating pressure 12.75 bar - Delivery rate 1.95 m³/min - Drive 400 V / 11 kW - Motor speed 3000 rpm - Integrated dryer - Space requirement approx. W 1500 x H 1600 x D 750 mm - Weight approx. 420 kg

Manufacturer: Atlas Copco Condition: ( Very Good ) Engine: Perkins 3 cylinder diesel water-cooled. Power : 5.9KW/7.4KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage: 230 V Brand new alternator Operating hours : approx. 1176h Year of Make:2012 Auction-ID: A1-51485-12

DOUBLE AUTOMATIC TEMPLATE SHAPER MACHINE Type BALESTRINI C70 Max. working width mm. 360 Max. working heigth mm. 120 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable spped motor power Hp 1 net weight : kgs. 1000

AUTOMATIC HYDRAULIC HORIZONTAL COPY LATHE Type BULLERI 110 / 4 MANDRINS N. 4 DISTANCE BETWEEN MANDRINS mm.320 MAX. WORKING DIAMETER mm.315 MAX. ADMITTED LENGTH mm.1200 MAX. WORKING LENGTH mm.1000 ROTATION SPEED rpm 4850 N.02 CUTTER MOTOR CUTTER MOTOR POWER Hp 7,5 each one HYDRAULIC PUMP MOTOR POWER Hp 1,5

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request

Posts to Erico Cadweld Welding Metal for the production of welding connections between copper cables e.g. for grounding cables, lightning conductors Special price

Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Parts: -Pelvis -Trolley -Filter -Rectifier -Product carriers -2x supply air system -3x exhaust air system -Refrigerator Specifications - 1 (line) - 1 x (wet turner) Cr Active - 111 Deco Chrome 112, 113, 114 Standing Sink 114 Sinks 116,117,118 Hot Rinsing 123 Dryers 124, 125, 126, 127 Speicher 129 - 141 Unloading Correction Station 142 - 150 El. Stripping 151 - 154 Sinks 155, 156 Stripping Nitric 157 - 161 Sinks 162, 163 Warm Rinse 164 Dryer 165 Speicher 166 - 172 Loading Correction Station 173 - 181 Memory 182 - 209 - - 2 (Line) Sinks 394, 393 PNS 392 Sinks 391, 390 MPS 389 Sinks 388, 387 Free court 386 Satin 385 - 383 Sinks 382 - 378 Gloss NI 377 - 374 Half Gloss 373 - 370 Bdobqwaov Ernfoltljg Sinks 369 - 367 Decapitate 366 Anodes 365 - 363 Sinks 362, 361 Copper 360 - 349 Sinks 348 - 346 Chem. Ni 345 - 342 Sinks 341 - 339 Accelerators  ...

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

AUTOMATIC COPY SHAPER machine type BALESTRINI JUNIOR second hand machine conditions : Excellent, machine like new CE mark : YES with tools : YES with safety protections and instruction booklet machine composed by n. 02 working units max. working length mm. 1400 max. working height mm. 180 max. working width mm. 500 tools rotation speed rpm 8400 feed speed of carriage : from 0,5 to 15 mt/min retun feed speed carriage mt.min. 70 spindle motors power Hp 10 x 2 hydraulic pump motor power Hp 4 volt. 380/50

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Copy head, copy head, copy device, copy lathe for top support, top slide, dovetail guide, tool slide, cross table -Tool slide: from Meuselwitz lathe -Measurements: see photos -Dimensions: 760/340 / H200 mm -Weight: 87 kg

Steel pipes, flush pipes -insulated copper pipe: EN 12735-1 -12 mm/1 mm -Length: 30 m -Weight: 8.1 kg

Busbars for any shipbuilder or re-fit project. Produced following the highest European standards and availability rate FOR QUOTATION: INFO@AMP-POWER.NL Maximum Voltage 300 V AC/ 48V DC Number of terminal studs : 4 / 8 Terminal Type : 16 Stud Terminal stud torque : 15.82 Nm Continuos Rating : 545A AC / 600A DC Base Material: Reinforced Polycarbonate Bus Material : Tin-Plated Copper CDA 11 /UNS11000 Weight : 0.79 kg / 1.25 kg

Copper pipe -Sanco copper pipe: EN 1057 -18x: 1 -Roll: 25 m -Number: 2 rolls available -Price: per roll -Dimensions: Ø 760/60 mm -Weight: 10.7 kg

Copy part head, copy head, part head -Copy head rail for: lathe -Dimensions: 100/81/H1747 mm -Weight: 43 kg

Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.

Short-stroke cylinders, pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders - Stroke: 200 mm - Piston rod: O 20 mm -Dimensions: 265/108 / H112 mm mm -Weight: 4.3 kg

Copy part head, copy head, part head -Copy head rail for: lathe, grinder -Dimensions: 465/80/H410 mm -Weight: 10 kg

cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)

Copper pipe -insulated copper pipe: EN 12735-1 -10 x 18 -Length: 20 m -Weight: 15.5 kg

Copy head, copying head, copying device, copying lathe -Heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and: accessories -Dimensions: 1100/170/H370 mm -Weight: 143 kg

Copy part head, copy head, part head -Copy head: for lathe -Dimensions: 280/260/H245 mm -Weight: 15.5 kg

x-travel: 150 mm y-travel: 300 mm z-travel: 350 mm table surface area: 350 x 200 mm spindle turning speed range: 475 - 20000 U/min total power requirement: 0,4 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 1 x 1,4 m • without templates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.

Ground cable, copper round cable, copper cable, busbar wire -Manufacturer: Medi, copper round rope highly flexible -Length: approx. 100 m -Wire diameter: 3.00 mm -Quantity: 4x roll available -Price: per roll -Roll dimensions: Ø 160 x 160 mm -Total weight: 4.2 kg/pc.

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 1040 x 7 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 53 kg

Copy Shaper / Copy Lathe Brand: Geiger Model: 8CD Milling + Grinding Workpiece length max. 1500mm

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 23 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 815 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 28 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 23 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 72, see photos -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photos -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6.5 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 12 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 540 x 3 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 5 kg

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 100, see photos -Weight: 11 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 80, see photos -Weight: 11 kg

Copying head, copying head, dividing head -Copy head: for cam discs -Dimensions: 900/400/H270 mm -Weight: 90 kg

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

max. exposition size: 70 x 90 cm exposing power: 2,5 kW weight: 189 kg serial no.: 89110195 voltage: 220 V current: 11 A dispersion foil automatic drawer cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - sn 73 - CE rules (year 1997)

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - sn 06 - CE rules (year 1998)

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995