128,877 used machines on RESALE, but how to find them? Machine Search
General SKU299X419 LocationBarneveld MakeCoperion Werner & Pfleiderer GmbH Stuttgart TypeKP-120/250 KombiPlast Compounder Mach.No.20493087 Sizes Screw diameter120 mm Main Features Motor310 KW Inlet diameter200 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter120 mm L/D15 Counter rotatingcheck Electric heating4 Water coolingcheck DC-motor310kW, 440V, 1780rpm With variable speed drivecheck Screw speed365rpm Feeding with hoppercheck Feeding with metering screwSide feeder MaterialNitriding Steel 1.8550 Information Year of construction2004 With switchgearcheck (as is) Weight± 22.000 kg Extra SpecificationsComplete line with side-feeder, discharge screw and partially control cabinet info compounder: Krupp Werner &: Pfleidere GmbH typ: D315 EXT Single screw screw dia: 250 mm screw lengte:1500 mm. screw van be heated L/D: ...
in nieuwstaat 2 Atlas Copco Freqentiegeregelde lage druk compressoren Max 4 Bar max 93 Kw 200 bedrijfsuren
feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2750x1800x2200 mm Weight: 2500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.
Screw compressor GA132VSD Atlas Copco. 132 kW 8.5 bar 26.06 m3/min. Inverter integrated.
General SKU245X192 LocationBarneveld CEcheck MakeAtlas Copco TypeZL2 VSD 11 J 400Y Pressure Pressure buildup0.4 Bar Main Features Capacity8.1 m3/Min Motor11 KW Pressure0.4 Bar Specified Features - Blower Blowercheck Capacity485 m³/h Motor11 kW, 400 volt 2935rpm With sound absorbercheck InletDN80 MaterialMild steel Information No.4101951663 Year of construction2022 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace1,0x1,25 m Total height1,45 m Weight460 kgBlowersAtlas CopcoBlowers > BlowersBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Technical data: - Operating hours 4248 h - Load hours 1978 h - Operating pressure 10 bar - Delivery rate 3.34 m³/min - Drive 400 V / 22 kW - Motor speed 3000 rpm - Space requirement approx. W 1300 x H 1250 x D 800 mm - Weight approx. 490 kg
Technical data: - Operating hours 20256 h - Operating pressure 13 bar - Delivery rate 4.09 m³/min - Drive 400 V / 26 kW - Motor speed 3000 rpm - Space requirement approx. W 900 x H 1750 x D 900 mm - Weight approx. 490 kg
Operating hours 58730 h Technical data: Max. compressed air: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg
feed pressure: 13 bar output: 30 kw Number of working hours: ca. 46980 h : 5,58 m³/min weight of the machine ca.: 0,53 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU379X942 MakeCoperion LocationBarneveld CEcheck TypeSP 50 EN Main Features Motor1.5 KW Inlet diameter40 mm Width50 mm Specified Features - Pelletiser MaterialStainless steel Pelletisercheck Rotor width50 mm Rotor diameter120 mm Number of rotor knives20 Knives can be changed1 Motor1,5 kW (400 V, 1445 rpm) Variable speed drivecheck Number of strands:1 Outlet50 x 50 mm Information No.A21-25633 Year of construction2021 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace0,90 x 0,90 m Total height1,42 mPelletisersCoperionMills > PelletisersBrand > Coperion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Key data: 22 , 8 , 2
Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)
Screw compressor Atlas Copco GA160VSD+FF 160 kW 8.3 bar 33.10 m3/min Inverter and dryer integrated WRG integrated
Second Hand Compressed Air Refrigeration Dryer FD1750+ 400V/50 Hz 14.00 bar 105.00 m³/min Year of manufacture 2018
Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible.
A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.
feed pressure: 11 bar Power: 11 KW Receiver: 500 L Control: AtlasCopco EL liter capacity: 1,38 m³/min dimensions of the machine ca.: - m weight of the machine ca.: 330 kg The Atlas Copco GX11FF EL (Full Feature, Extended/Electronic) is an oil-injected screw compressor with a rated power of 11 kW (15 hp), designed for continuous industrial use. The ‘Full Feature’ version features an integrated refrigeration dryer that provides dry compressed air straight from the factory. Delivery volume (FAD): approx. 1,446 l/min for the 10 bar version or approx. 60 CFM. Tank capacity: mounted on a 500 litre tank. Noise level: relatively quiet at approx. 67–69 dB(A) thanks to soundproofing hood. - Integrated dryer (FF): The refrigeration dryer prevents condensation from forming in the pipes and protects downstream tools. - Electronic control: The ‘EL’ models often feature a more advanced c ...
An Atlas Copco screw compressor is being sold. Bj 2022 Operating hours and technical data in the picture Plant has always been serviced and is sold due to cessation of operations If required, the pipes for the air supply can be purchased additionally. Machine has to be dismantled by yourself. The system is handed over by us without electricity. Article location Nuremberg All information without guarantee Available from June 2026 Inspection and test run is possible Sale only to tradespeople Price 8000 Euro net plus VAT Loading facilities available
General SKU221Y089 MakeAtlas Copco SerialITJ475307 Magento base g_extra_specificationsair compressor with dryer 10 bar, pressure , refrigeratnt R513A, CE, Air compressor 3 kW, dryer 1 kW, with compressed air tank 500 l, 11 bar, 1006 operating hours Pressure Pressure buildup10 Bar Main Features Capacity0.98 m3/Min Motor7.5 KW Pressure10 Bar Specified Features - Blower Capacity0,98 m³/min Information TypeG7 FF Year of construction2021 LocationBarneveld Weight250 kg CEcheck Extra SpecificationsOil-injected rotary screw air compressor with integrated refrigerant dryer: :Refrigerant type: R513A: :Max inlet temperature: 46 °C, :Max ambient temperature: 46 °C, :FAD capacity: 16.4 l/s = 59.0 m³/h = 34.7 cfm, :Duty: Continuous operation / 24-7 useBlowersAtlas CopcoBlowers > BlowersBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition ...
Overview This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data Operating Pressure: 7–8.5 bar Air Capacity: 24.1 m³/min Power Supply: 132 kW Weight: 4,075 kg Condition: Excellent, annual maintenance completed August 2025 Optional equipment: Atlas Copco air dryer available Status: Installed and connected, fully functional
Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m3/min
Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg
Screw compressor Atlas Copco ZT160VSDFF Inverter and dryer integrated. 160 kW 10.40 bar 24.20 m3/min
Screw compressor Atlas Copco GA160 160 kW 7.5 bar 30.20 m3/min Year of Make: 2017 Hours: 39,772
Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg
Atlas-Copco 1500 liter tank pressure vessel
2 units semi-hermetic reciprocating compressors by DWM Copeland, model D6SJ1-400X-AWM/D. Technical data: 6-cylinder reciprocating compressor Displacement: approx. 127 m³/h Speed: 1450 rpm at 50 Hz Voltage: 380–420 V (50 Hz) / 440–480 V (60 Hz) Protection class: IP54 Max. operating pressure: 28 / 22.5 bar (H/L) Year of manufacture: 02/2003 Manufacturer: Copeland (Made in Belgium) Condition: Used, removed from system. Signs of storage and use present. Functional test not performed. Sale in current condition, without warranty or guarantee.
Compressor: 13 bar Dryer Atlas-Copco FD220 14 bar Volume flow rate: 8.52 m3/min Power imput: 50 kW
Ex-protected rotary valve, ZRD 200 1-5-GC, Coperion, new -40% Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - Explosion-proof rotary valve for granules, model ZRD 200 1-5-GC, Coperion, new -40%, - Explosion-proof design, Up to max. 60°C, - Powder and granules, aluminium dust containing steel and stainless steel, - designed for a bulk density of 350 kg/m³, max. 450 kg/m³ - Without drive and bearing air purge (quote available), - Housing material: grey cast iron, rotary valve: steel, - Inlet and outlet: DN200, - Please feel free to ask us for the specifications, - Viewings are available at any time, 6 months warranty We give you 6 months warranty for these goods ...
Second Hand Oil-Free Screw Compressor Atlas Copco ZT75VSDFF Inverter and dryer integrated 75 kW 8.75 bar 13.20 m3/min Year of Make: 2008 Hours: 63,129
Key data: 22 , 13 , 4
Atlas Copco GA22VSDFF screw compressor Inverter and dryer integrated 22 kW 13 bar 3.85 m3/min Year of Make: 2008 Hours: 64,878
Offer 25447 Technical data: - Operating hours 13598 h - Operating pressure 12.75 bar - Delivery quantity approx. 21.7 l/sec - Drive 400 V / 7.5 kW - Motor speed approx. 3000 rpm - Air filter - Space requirement approx. W 1400 x H 1600 x D 800 mm - Weight approx. 270 kg
Screw compressor Atlas Copco GA132 132 kW 7.5 bar 25.40 m3/min Year of Make: 2017 Hours: 37,697
Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg
Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg
fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Manufacturer: ebmpapst, axial fan axial fan -Type: S4D350-AF10-17 -Voltage: 230/400 V -Dimensions: Ø 400 x 110 mm -Weight: 3.5 kg
Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type ZR11M3-TWD-561 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 4x compressor available -Price: per piece -Dimensions: 380/330/H550 mm -Weight: 91 kg/unit
Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type QR 1 2M1 - TFDN-551 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 4x compressor available -Price: per piece -Dimensions: 340/330/H480 mm -Weight: 70 kg/unit
Screw compressor Atlas Copco GA30VSDFF Inverter and dryer integrated. 30 kW 12.80 bar 5.58 m3/min Year of Make: 2013 Hours: 68,578
Screw compressor Atlas Copco GA160VSD+FF. Dryer and inverter integrated. 160 kW 8.3 bar 33.10 m3/min. Year of Make: 2021 Hours: 25,495
Oil-free screw compressor Atlas Copco ZT22 22 kW 10 bar 2.72 m3/min Year of Make: 2006 Hours: 54,650
used
Atlas Copco ZR160VSD oil-free screw compressor Inverter integrated. 160 kW 10.40 bar 25.90 m3/min Year of Make: 2008 Hours: 54,511
Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153
Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled
Used PET Bottling Line for Still Water Up to 30000 bph Introduction to the Bottling Line The Used PET bottling Line for still water, has been specifically designed for still water with a maximum capacity of 30,000 bottles per hour (bph). Although currently assembled, the Used PET bottling Line for still water has ceased production at the end of this month but retains its integrity and potential for future reactivation. Configuration and Components of the Used PET bottling Line for still water Several machines work in synergy to form an optimal process at the heart of the Used PET bottling Line for still water. Firstly, the Blow Molding Machine from Sidel, model SBO 20 5270, commissioned in 2001, is crucial for forming PET bottles ranging in formats from 0.33 L to 1.5 L. It is important to note that the molds are not included in the line. Compressor and Quality Control of the Used PET Bot ...
Overview This low-pressure air compressor was manufactured in 2012 by the Swedish company Atlas Copco. The GA132 VSD model delivers up to 24.1 m³/min at a maximum pressure of 8.5 bar. The unit was fully reconditioned in 2025, including the installation of a new HMI, and is in excellent working condition. It remains installed and connected, can be inspected on-site, and is immediately available. Spare parts are included, and an Atlas Copco air dryer can be supplied optionally. Technical data Operating Pressure: 7–8.5 bar Air Capacity: 24.1 m³/min Power Supply: 132 kW Weight: 4,075 kg Condition: Fully reconditioned in 2025 (new HMI) Additional equipment: Optional Atlas Copco air dryer Status: Installed and connected, fully functional Availability: Immediate
Atlas Copco GA10 air compressor (1994) with Atlas Copco FD30 refrigerant dryer (2002). Auction-ID: A3-43511-17020
DOUBLE AUTOMATIC TEMPLATE SHAPER MACHINE Type BALESTRINI C70 Max. working width mm. 360 Max. working heigth mm. 120 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable spped motor power Hp 1 net weight : kgs. 1000
maximum number of results exceeded
please refine your search
500 € 
