cop used for sale

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Milling length: 365 mm -Milling width: 100 mm -Milling stroke: 45 mm -Motor: 220/380V 740W -Spindle speed: 12000 rpm -Dimensions: 800/750/H1320 mm -Weight: 108kg

Copy head, copy head, copy device, copy lathe for top support, top slide, dovetail guide, tool slide, cross table -Tool slide: from Meuselwitz lathe -Measurements: see photos -Dimensions: 760/340 / H200 mm -Weight: 87 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -For machining: of aluminum and steel profiles -with 1 vertical and 1 horizontal milling motor -per motor: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -ransport dimensions 800/1200/H1630 mm -Weight: 270 kg

Short-stroke cylinders, pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders - Stroke: 200 mm - Piston rod: O 20 mm -Dimensions: 265/108 / H112 mm mm -Weight: 4.3 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Copy part head, copy head, part head -Copy head rail for: lathe, grinder -Dimensions: 465/80/H410 mm -Weight: 10 kg

Copy part head, copy head, part head -Copy head rail for: lathe -Dimensions: 100/81/H1747 mm -Weight: 43 kg

Grinder for copper separation Dry model SM200 Ecorobust

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpmDouble axial driver drill.-mill.-unit on rev.Double axial driven drilling and milling unit on revolver with cyl. junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 r ...

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55/1.1 KWRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double axial driver drill.-mill.-unit on rev.Double axial driven drilling and milling unit on revolver with cyl. junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpmSpecial equipmentHinged belt chip conveyor with Discharge height 1200 mm Self-regulating guide bush Double cone Double turret drill holder with cyl. holder 25 mm Surcharge for cooling system 600 l Pump 8 and 20 bar, paper belt filter Bushing double cone 0_18 ...

GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWAxial drilling unit for back work.oper.Axial drilling unit for support for back working operation (slide 2) with 2 rot.spindles, junction for collet ESX/ER 20 and 2 cyl.junction diam.25mmDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 sp ...

Speed range pre-milling spindle 60 - 1000 rpm Speed range finishing spindle with V-belt 350 - 10000 rpm TOOL CARRIAGE Distance between milling cutter and stylus 450 / 350 mm Vertical movement 50 mm Movement lengths 300 mm Movement transverse 180 mm FIXED WORK TABLE 250 x 700 mm large distance to spindle nose 475 mm Movement lengthwise and transversely 300 x 200 mm max. workpiece weight 600 kg Drive power 0.9 / 1.1 kW Dimensions approx. L x W x H 1350 x 1600 x 1950 mm Weight approx. 1.5 t used, in good condition

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

CAMAM rotary milling machine for large workpieces Spindle diameter 35mm Spindle height 130 Maximum workpiece radius 440mm Pneumatic clamping of the material Motor power 7.5kw Net price

max. exposition size: 70 x 90 cm exposing power: 2,5 kW weight: 189 kg serial no.: 89110195 voltage: 220 V current: 11 A dispersion foil automatic drawer cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double Spindle Copying Machine Metal, Plastic, Wood

Year: 2010 - technically efficient, ready to work - after full service - cooling installation - copy template - pneumatic clamping set

Digitalkopierer - Color Copier Ricoh Aficio MPC6000 Serial No. M7981201474 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

SPECIFICATIONS: Pantograph with floating milling head Engine power: HP 5.5 06 adjustable stops Speed 9,000-18,000 rpm Vertical Stroke

Combined copying milling machine - lathe MICHAeL KAeMPF -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

SPECIFICATIONS: Engine power: HP 4.5 Spindle mount conical MK2 Vertical stroke of the shaft

Copy milling machine Make: Reichenbacher Model: R 818 8 milling stations Manual scanning of the sample workpiece

SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - sn 06 - CE rules (year 1998)

SECOND-HAND 6 HEADS LINEAR COPYING SHAPER AND SANDER BACCI MOD. FC6 2500 – CE RULES - units 1-2 milling units - units 3-4 sanding units - units 5-6 sanding units - working length mm. 2500 - working height mm. 180 - n. 8 locking cylinders - cabin (4 sides + roof) - year 1999

SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - sn 73 - CE rules (year 1997)

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995

SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - motor Hp 7,5 - wheel diam. 840 mm. - copying device - max cutting length 1300 mm - max cutting height 100 mm - cutting angle +- 45° - waste conveyor belt SMA - SN 08 - year 2002

Key data: 180 mm, 300 mm, 60 mm

Two-spindle copy milling machine, Elumatec KF 78 / 60 Used & Functional For machining aluminium or steel profiles E.g. window construction With vertical and horizontal milling motor, spraying device and pneumatic clamping device Specifications: Profile height: 60 mm max Milling area horizontal: 180 x 70 mm Milling area vertical: 300 95 mm Stroke: 110 mm Bore speed: 6000 rpm Milling speed: 12000 rpm Air consumption per cycle: 12l Drive power: 740/800w Installation dimensions: (HxWxD) 160 x 280 x 110 Weight approx. 270kg

Rotatable support table between 0° and 180° with latching points, thus 3-sided machining in one clamping Speed per minute: 12.0000 Pneumatically controllable copy pens Pneumatic material clamping Minimum Quantity Spraying Device Pneumatic lifting movement can be switched between slow and fast Weight: approx. 600 kg

COPY SHAPER machine PADE UINZE 2300 2T second hand machine machine for simultaneously shaping both sides of the treated piece of wood. the machine is suitable for the production of chairs, tables, beds, armchairs and furniture elements in general. technical details : machine composed by 2 units : 1+1 shaper units . motor power Hp 5,5 each one max. working useful length mm.2500 max. working width mm. 360 max. working heigth mm. 160 speed rotation shaper units rpm 8500 hydraulic carriage forward speed mt./min. 0 / 25 hydraulic carriage return speed mt./min. 40 hydraulic pump motor power Hp 5,5 net weigth kgs.2600 volt. 380/50

Machine Type: Copy Milling Machine Manufacturer: DECKEL Model: KF 12 Machine No.: 3680 Condition: good Offer Type: Used Machine Specifications: Table: 600 x 430 mm 450 x 450 mm 700 x 250 mm Speed range: 60 – 10000 rpm. Travel range: x = 300 mm y = 200 mm Propulsion: 1.1 / 1.3 kW Remark: without milling spindle Weight: 1500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Description: - Approx. Onsite Dimension. (l x w x h): 560 x 540 x 500 mm, weight approx.: 50 kg

Compact copper granulating plant with a total weight of 3.500kg dust aspiration in the primary mill conveyor belt and another one in the separation table, at the back we have a drawer with several filters where the dust accumulates to work without mask, also comes with 2 vibrating tables to obtain a purity of copper of 99.9% in the conveyor belt we find an electromagnet frequency inverters Siemens brand the primary mill is 30cv the machine in total makes a sum of 48kw with an hourly production of 400kg/h.

Max. machining length: 2,600 mm Max. transverse stroke: 440 mm Max. vertical stroke: 200 mm Milling spindle speed infinitely adjustable between 2,800 and 12,000 rpm. Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 3 pneumatically controllable copy pens 4 pneumatic material clamps Minimum Quantity Spraying Device

Description: • Copy shaper machine • Serial number 7087 • Maximum working length approx. 1800 mm • Maximum workpiece widt approx. 330 mm • Maximum working height approx. 160 mm • Clamping table for milling templates • 4 pneumatic clamps • 1 x milling unit (right-left), power 5.50 KW each motor • Hydraulic unit motor 4 KW Approx. Onsite Dimension. (l x w x h): 3,950 x 2,300 x 1,850 mm, weight approx.: 3,500 kg

Description: • Copying lathe • Distance between centres 1400 mm • Maximum turning diameter over bed approx. 350 mm • Maximum turning diameter over slide approx. 220 mm • 6 rotation speeds: 900/1600/1800/2300/3200/4600 rpm • With hydraulic copier • 2 turrets for tools, manualdrive • Adjustable carriage speed hydraulic driven • Hydraulic unit motor power 1.50 KW Approx. Onsite Dimension. (l x w x h): 3,100 x 1,100 x 1,800 mm, weight approx.: 1,000 kg

20 copy cells You can purchase the cutter together with the forming press. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. We also have a lot of machines in stock.

Description: 4-spindle copying lathe with aluminium template STANDARD EQUIPMENT 4 spindles for simultaneous copying of 4 workpieces Variable rotation with inverter Spindle drive with bronze gears and worm gear Centring devices for automatic workpiece positioning Pneumatic clamps Approach and moving away of cutter unit with pneumatic system Cutter carriage feed on rectified guides and recirculating ball pads Independent adjustment of cutter carriage feed and wood rotation Machine and electrical system complying with EC regulations TECHNICAL DATA Max. turning length mm 1100 Max. turning diameter mm 150 Cutter motor power V 380 / 50 - Kw 4 Spindle rotation motor power V 380 / 50 - Kw 0,75 Cutter carriage feed motor power V 380 / 50 - Kw 0,55 Tool holder diameter mm 145 Tool diameter mm 35 Variable carriage feed speed mm/min 0 ÷ 600 Variable spindle rotation speed r ...

1 LIBA type COP 2 HS, width 170", gauge 28, year 1980, with PROKOSTOP 4044

1 LIBA type COP 2 HS, width 170", gauge 24, year 1980, with PROKOSTOP 4044

Description Brand Pro Froid Model Copeland Scroll ID SH4797 Status Active Year of manufacture 2010 Location Bucure?ti / Bucharest (RO) Old price: 13 500 Euro. 1. Refrigeration and Climate Circuit 1.1. Pro Froid (Franta) GC4/CCR3SH 4PCS15ZC/SC Packed air cool condensing unit: • 3 pcs. Semi-hermetic Piston Bitzer 4PCS 15.2Y compressors • 3 pcs. crankcase heater • 1 pc. Liquid receiver • 1 pc. HP and LP safety pressure switches • 3 pcs. HP safety pressure switches • 3 pcs. LP safety pressure switches • 3 pcs. electric panel boxes – IP 54 • 3 pcs. electrical engine protection devices • 3 pcs. Mounted valves on compressors • 1 pc. Automatic electric panel • 1 pc. oil management system 1.2. Electric and control panel 1.3. air cooled condenser S060 3MSC 6PH/6PL SV 1.4. Helpman / Alfa Laval coolers / ventilators / fans – 17 pcs. 1.5. Electri ...

Output: 60 cups/Min. Filling system: volumetric 100-250 g.Optional up to 1000g. Cup size: rectangular 110 mm of diagonally, or 110 mm diameter. Closure: snap on lid or seal sheet. Product: Margarine, lard, salad, etc. Used machine, complete overhauled.

Pantograph Rinaldi Copy 380/SLI used in perfect working order. Transport to be paid by the buyer.

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge),  ...