cooling used for sale

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

Machine type TIG welding system gas-cooled DC and AC system Brand Werner Type AGW 235 Supply voltage 3 x 400 volts Setting range 10 – 230 amperes Duty cycle 35 % ED at 230 amps 60% ED at 160 amps 100% ED at 120 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile industrial plant Fuse 32 Ampere Dimensions L x W x H 880 x 410 x 610 mm Weight approx. 150 kg Age approx. 20 years Condition workshop-tested very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from date of delivery Original price 3.500,00 € + ...

RC GROUP GLIDER FREE 630 V2 Y5 Brand:RC GROUP Type:GLIDER FREE 630 V2 Y5 Stock number:M23-4609 Cooling capacity:500 kW Application:Cooling Number of fans:12 Refrigerant:R134a Refrigerant Content:2x 107,5 kg Voltage:400 Volts Dimensions:7484 x 2310 x 2605 mm Weight:7,001 kg Year:2013 Number in stock:2 piece(s) Price:Quotation Request Description: Nice air-cooled RC Group water chiller with 2 screw compressors distributed over 2 cooling circuits. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C (Q= 602 kW at Tw= +15/10°C and Tamb= +40°C). Free-Cooling: Q= 536 kW at Tw= +15°C and Tamb= 0°C. Visit our website: used-refrigeration

Machine type: TIG inverter welding system gas-cooled direct current system Make: Merkle Type TIG 300 DC Serial No. 70.381 Connection voltage 3 x 400 volts Setting range 5 – 300 amps Duty cycle 50 % d.c. at 300 amps 60% d.c. at 280 amps 100% d.c. at 220 amps Current adjustment infinitely variable max. weldable material thickness steel / VA = 8 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse 16 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 26 kg Age approx. 13 years Optional accessories Connection for water cooling Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piec ...

Key data: 1180 °C

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

Brewhouse 5/10 HL, professional brewing system, like new, built in mid-2020, as well as tanks, cooling, etc. We sell professional brewing system three-vessel brewhouse 5/10 HL, like new, manufacturer Labu, built in mid-2020, so far 53 brews, due to closure of operations MADE IN THE EU! Labu three-vessel brewhouse basic version 5/10 Hl, year of construction 2020, commissioning mid-2020, 53 brews so far, with chipper, electronic start timer, electronic liquid level indicator, automatic brewing ladle filling, integrated CIP cleaning, automatic dosing of the tail water, visualized remote monitoring, stainless steel platform, automatic shot feeder, storage container for shot feeder, pump, beer hoses and connections Price brewhouse EUR 85.000,00 excl. VAT Optionally, on-site training and subsequent supervision by a brewer can be offered. It is also possible to sell existing recip ...

Farm Dairy Milk and Cream Pasteur Machines were completely overhauled in 2015 and are in very good condition. Included. - Milk pasteurizer GEA 1000 liters/h (continuous pasteurizer 93% heat recovery) incl. pumps, control, Temperature Recording - Homogenizer Spomaz 1000 liters/h - Seithal centrifuge 1000 litres/h - 2x Coolable buffer tanks (whole milk, low-fat milk) - Cream / yoghurt pasteurizer GEA 300 litres/h (continuous pasteurizer) with Electric heating incl. pump control Temperature recording - Homogenizer Spomaz 300 liters/h - Buffer tank 600 liters - 2x yoghurt tank 600 litre double jacket heating and cooling bar - Manual CIP basin - Siemens S7 for controlling the dairy. - various coupling panels, butterfly valves, leakage disc valves, Pipelines, etc... - Large cooling unit for cooling the pasteurizer and storage tank - 3000 litre cooling water  ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerType of gripperDouble gripper Tool changer planevertical Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgSlot width 14 mmDirect mea ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base machKi ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

Trane RTAF 145 chiller with 522 kW cooling capacity | ChillerTech - Used chillers available from stock! Basic information: -Manufacturer: Trane -Model: RTAF 145 -Cooling capacity: 522 kW (standard conditions according to suppliers' conditions) - Air-cooled unit -Refrigerant used as well as its quantity: R134A | section A – 45.00 kg / section B – 43.00 kg -Number of refrigeration circuits: 2 refrigeration circuits -Operation Mode: Cooling Only -Year of production: 2013 -Dimensions: length: 5645 mm | width: 2200 mm | height: 2525 mm +/-5% - Connection pipes: flanged 5" – fi125 mm -Total weight: 3990 kg -Operating weight: 3850kg -Quantity: 2 pieces Device available immediately Check out our other cooling/heating equipment...

Used chiller Daikin EWAD-170 a cooling capacity of 170 kW | ChillerTech - Used chillers available immediately! Basic information: -Manufacturer: Daikin -Model: EWAD170MBYNNHXU -Cooling capacity: 170 kW in the parameter 12/7 oC at an outside temperature of 35 oC -The refrigerant used as well as quantity: R134A / circuit A – 42,0 kg -How many cooling circuits: 1 circuit - Year of production: 2009 -Operating range: from 5 oC to 20 oC -Number and type of compressors: 1 pc. semi-hermetic screw compressor Daikin ZHC3LTGUYE -Additional information: low noise -Dimensions: width – 1109 mm; long – 3973 mm; high – 2221 mm -Weight: approx. 1800 kg The device is available immediately Check? other Our cooling/heating devices...

Used chiller Blue Box KAPPA/LN 1502 a cooling capacity of 350 kW | ChillerTech - Used chillers available immediately! Basic information: -Manufacturer: BlueBox -Model: KAPPA/LN 1502 -Cooling capacity: 350 kW in the parameter 5/0 oC at an outside temperature of 40 oC -The refrigerant used as well as quantity: R407C / circuit A – 36,0 kg / circuit B - 36,0 kg -How many cooling circuits: 2 circuits - Year of production: 2000 -Operating range: from -8 oC to 24 oC -Number and type of compressors: 1 pc. semi-hermetic piston compressor RefComp SRC-L-180 L1 -Additional information: NONE -Dimensions: width – --- mm; long – --- mm; high – --- mm -Weight: approx. 3000 kg The device is available immediately Check other Our cooling/heating devices...

Used chiller Clivet WSAT-EE242 a cooling capacity of 60 kW | ChillerTech - Used chillers available immediately! Basic information: -Manufacturer: Clivet -Model: WSAT-EE242 -Cooling capacity: 60 kW in the parameter 12/7 oC at an outside temperature of 35 oC -The refrigerant used as well as quantity: R407C / circuit A – 15,0 kg -How many cooling circuits: 1 circuit - Year of production: 2005 -Operating range: from 0 oC to 24 oC -Number and type of compressors: 2 pcs. hermetic scroll Copeland -Additional information: low noise and water pump Lowara -Dimensions: width – 1250 mm; long – 2130 mm; high – 1550 mm -Weight: approx. 700 kg The device is available immediately Check other Our cooling/heating devices...

Heat pump / chiller - switchable - water / water cooled, Type: OCEAN Tech HOCT 200 MTA S.p.A. OCEAN Tech HOCT 200 are water-cooled heat pump / chiller for indoor installation without hydraulic circuit (pump, accumulator) incl. crank pan heating, phase monitoring. An external dry cooler unit is not included in the offer. Cooling capacity kW 53.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.25 Cooling water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 13.5 Heating capacity kW 67.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.51 Cooling water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 11.7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 24 Max. current (A) 40 Starting current circuit (A) 162 Protection class: IP22 Dimensions: Length mm 1735, Width mm 660, Height mm 120 ...

Heat pump / chiller - switchable - water / water cooled, Type: OCEAN Tech HOCT 200 MTA S.p.A. OCEAN Tech HOCT 200 are water-cooled heat pump / chiller for indoor installation without hydraulic circuit (pump, accumulator) incl. crank pan heating, phase monitoring. An external dry cooler unit is not included in the offer. Cooling capacity kW 53.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.25 Cooling water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 13.5 Heating capacity kW 67.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.51 Cooling water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 11.7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 24 Max. current (A) 40 Starting current circuit (A) 162 Protection class: IP22 Dimensions: Length mm 1735, Width mm 660, Height mm 120 ...

Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,

Technical parameters Laser power 1000 W Laser source type optical fibre Source manufacturer MAX Photonics Length of laser waves 1064 nm Weldidng speed 0-120 mm/s Input current 230V 50Hz Kit includes: - Automatic wire feeder -Cooler 24 month warranty You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. B8a32e7mlf Laser welder LWH-1000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - Automatic Wire Feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 H ...

You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...

Universal temperature control unit WEINREICH Type WTD 4 Fabr. No.: 11932217 Year of construction 1993 Temperature max. 140C Operating overpressure max. 6 bar Pump capacity 30 l/min. Tank volume 4 litres Heating capacity 4 kW cooling capacity Heat exchanger 15 kW Engine power of the pump 0.37 kW Circulation water Flow + return G 3/8 Cooling water flow + return G 3/8 Total power 4.4 kW Mains connection 380 Volt, 50 Hz, CEE plug - Temperature control medium Water temperature control with actual and setpoint values STÖRK-TRONIC Type ST 96-35.02K- Water circulation pump SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - mobile on 4 wheels Dimensions L x W x H 620 x 260 x 670 mm Weight 55 kg good condition; used

WEBER COOLING BASE TWO Vacuum cooling system Cooling capacity: 2 IP or 2 EUR Products to be cooled: leafy vegetables/fruits up to 1000 kg Cooling temperature: from 20-30 degrees C to 3-5 degrees C Control: PLC Unitronics V1040, Weber 2022 software Vacuum pump: 1 x Busch RA R5 0305D ( 300 m3 / h ) Chiller: Aermec ANL 202 Compressor: Metabo Basic 250-24W OF

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Vertical 3-axis CNC machining center with nano precision Kern Pyramid Nano Year of construction: 2013 Heidenhain iTNC 530 Table size: 600 x 600 mm Table load: max. 250 kg Longitudinal travel: X 500 mm Transverse travel: Y 500 mm Vertical travel: Z 400 mm Smallest travel increment: 0.1 μm Feeds up to: X/Y/Z 30,000 mm/min. Rapid traverses up to: X/Y/Z 30,000 mm/min. Acceleration: X/Y/Z 10 m/s² Vector-controlled milling spindle: Spindle mount: HSK-25 Spindle drive power: 6.4 kW AC Spindle speeds: 500 - 50,000 rpm. Spindle torque (S1): max. 1.6 Nm Automatic tool changer: Tool magazine positions: 32-fold Tool holder: HSK-E25 Tool Ø (every second place free): max. 60 mm Tool length: max. 160 mm Tool change time: 3 sec. Chip-to-chip time: 6 sec. Machine weight: approx. 8,000 kg Machine height: LxWxH 2,850 x 3 ...

Container Cooling Units (Reefer) (container refrigeration systems) available in good condition. They have the following specifications: - Temp. Range: -20 C° to +20 C° - Mass: 600kg (due to aluminium, steel and copper) - Refrigerant: R-134a - LxWxH: 203x44x224 cm The cooling units are excluding a container. A total of 28 Cooling units available. All 28 cooling units are able to fit in a 40hc container for transport.

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 10 F Engine No.: in production Power: 524 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: A. van Kaick Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1 ...

Rieber MaxMo Cold Buffet Edition The Rieber MaxMo Kalt Bain Marie is a professional cooling system that has been specially developed for use in gastronomy and catering. This innovative device allows you to present a variety of cold dishes such as salads, desserts, cold cuts, seafood and much more at the optimal temperature and keep them fresh. The Kalt Bain Marie has precise temperature control that allows you to set the desired cooling temperature for each dish individually. Due to the constant cold, the food is stored safely and hygienically, which preserves the quality, taste and appearance of the dishes. The Rieber MaxMo Kalt Bain Marie is characterized by its high-quality workmanship and first-class materials that ensure efficient cooling. The appliance is energy-efficient and environmentally friendly, so you can optimize both the quality of your food and your operating co ...

Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast management, Number of tanks: 3 pieces, Capacity: 32 hl , Pressure: 2 bar test pressure 2,6 bar, Width: 1270 mm, Height: 3905 mm, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1,5 / 2,2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Transport dimension: Ø60 x 290 mm -Weight: 0.4 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Transport dimension: Ø65 x 365 mm -Weight: 0.5 kg

Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg

Evaporator dry air cooler Guntner S-GHN 080.2F/212-HHS50. E with a cooling capacity of 50 kW | ChillerTech - Cooling/heating devices available from stock! Basic information: -Manufacturer: Guntner -Model: S-GHN 080.2F/212-HHS50. E -Cooling capacity: 50 kW at 8 degrees Celsius -Year of production: 2008 -Capacity: 86.5 L - Type of fans: axial -Fan type: VT01258 Device available immediately Check out our other cooling/heating equipment...

Dry cooler condenser dry air cooler CIAT AIRIAL C7033 HI 680 with cooling capacity 80 kW | ChillerTech - Cooling/Heating Equipment Basic information: -Manufacturer: CIAT -Model: AIRIAL C7033 HI 680 -Cooling capacity: 80 kW under standard conditions -Year of production: 2003 -Number of fans: 3 pcs. -Capacity: 52 dm3 - Type of fans: axial -Additional information: ON/OFF control -Dimensions: length – 3895 mm; width – 1100 mm; height – 1100 mm -Weight: max. 300 kg Device available immediately Check out our other cooling/heating equipment...

Used water cooling machine for food by Waiz model WAIZ 01. New 2019. Electricity supply: - Mains voltage: V 400 - Mains frequency: Hz 50 - Consumed power: kW 2.2 - Product moving belt speed [m/min]: 4 - Cooling water consumption [m3/h]: not more than 0.6 - Specific water consumption per kg of product [l/kg]: 1,5 - Recommended cooling water temperature [oС]: 10-15 - Machine dimensions [mm, no more], DSW 210010501800 - Cooling method standard type (water circulation) - Weight: 750 kg - Surface area of the line in contact with the product: 1,6 m2

grinding diameter: 350 mm grinding length: 650 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine in very good condition run in one shift (20,000 switch-on hours). Available from January 2024 Fanuc 0i-TD control system Centre distance 650mm Centre height 175mm Workpiece table swivelling +8.5° with fine adjustment and pneumatic lift-off Cross axis X travel 285mm Feed rate 0.001-10,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm Longitudinal axis Z Travel 800mm Feed rate 0.001-20,000mm/min Direct, linear absolute measuring system, resolution 0.0001mm H1 wheelhead with B-axis and 1° Hirth serration Three tool positions Swivelling range -15 to +225° Pos T2 - External grinding with grinding discs Ø500x80x203mm Motor spindle with internal cooling 7.5-11kW, 3,200rpm_max, v_max = 50m/s  ...

SPIRO CSTW 2D HG 1500 seam welding machine built in Switzerland in 2008, is designed for welding workpieces made of, among others, stainless steel or galvanised steel that are overlapped. The completed seam requires no additional sealing, cleaning or painting, and the channels are perfectly tight along the entire length of the workpiece. The versatile CTSW-2D HG welding machine uses welding rolers to precisely and accurately join materials, making it ideal for a variety of industrial production applications. Technical data of the SPIRO CSTW 2D HG 1500 welding machine - machinable materials: stainless steel, galvanised steel, black steel, tubes - welding length (seam): 60-1524 mm - maximum workpiece diameter: 1000 mm - minimum workpiece diameter: 10 mm - maximum workpiece thickness: 1.25 mm - minimum workpiece thickness: 0.3 mm - maximum welding speed: 12 m/min - seam overlap:  ...

Used Complete Bottling Line for PET and Glass 2007 Depalletizer This unit takes bulk of bottles that are stacked on a pallet and places them onto an accumulation area before entering the Lowerator unit The operation of the machine is manual There are some forklift interactions with loading full pallets onto the infeed conveyor removing the empty pallets from the discharge conveyor and the placement of empty pallets at the operator level layer dividers Cleaning is carried out with the machine switched off and the hoist lowered Bottle Lowerator The Lowerator transfer the bottles from the Depalletiser operator level to the lower level Rinser before entering the Filler This unit is used for glass bottles only and can be mechanically adjusted easily depending on different bottle dimensions Gripper Rinser Bottle Rinser provides an excellent way to fully clean the bottles The bottle rinser is u ...

General SKU900WP042 LocationBarneveld MakeGWK TypeGHKV 3412, Main Features Capacity500 KW Temp.31 °C Specified Features - Temperature control unit Temperating machineRecooling plant With cooling35,2kW Capacity500kW Temperatureinput 31°C- output 21°C Tank capacity2x 3000Ltr. With pumpcheck With temperature controllercheck With controlcheck Information Extra SpecificationsTyp GHKV 3412 Cooling capacity: 500 kW Amount cooling water: 45m3 Cool water input: 31°C Cool water Output: 21°C Tank: 2x3000 Liter with Chiller Typ EKSSP 35 TK,Cooling capacity: 35,2 kW,Refrigerant: R404a ( 122 kg ),Cooling medium: saltwater with 80% PEKASOL 2000Temperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

Storage tank with 2 torospherical heads. Fitted with bottom and side-wall cooling jackets. 2 tanks, each 83 hl total volume, with 2 x cooling jackets, Additional title: 2 vertical tanks, Total volume: 83 hl, Operating pressure: 0 bar, Operating temperature: 20 °C, Width: approx. 1800 mm, Height: approx. 4030 mm, Material: Stainless steel 1.4301, Position: vertical, Base construction: 4 x pipe feet, Features: bottom cooling jacket; side-wall cooling jacket; sampling valve; 2 x sight glass; side manway; CIP piping; outlet valve (butterfly valve); Contact thermometer; solenoid valve for glycol piping

Mixing tank. - glycol cooling, 1 x side wall cooling jacket - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with vacuum valve and safety valve, Capacity: 431 hl, Operating pressure: 4 bar, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Stainless steel tank. - glycol cooling, 1 x side wall cooling jacket - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve, Additional title: Outdoor tank for storing fluids, Capacity: 744 hl, Operating pressure: 0 bar, Material: Stainless steel, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

PE/PP thick Sheet/board extrusion line Capable to produce ABA multilayer sheet extrusion thickness from 3 to 30 mm Widthness 1500 mm Extuders; JWS D/L=150/35 vented single screw extruder and D/L=JWS 90/35 vented single screw extruder, Hydraulic screen exchanger, ABA Distributor, 3 roller calendars (ODXL=700X2100 mm) with Fully oil temperature controlled, 10 pieces of cooling rollers with drive and cooling water units, 5 rolls temperature controlling system with drive, Cooling bracket (Cast aluminum) and lamination unit, tunnel anneal oven, First Haul off unit, Cooling bracket (Cast aluminum), Second haul off unit, Film coating system, Length and Transverse cutter, Belt conveyor, electricity control all of electrical, electronic and mechanical components were chosen from named company brands. (Servo motors from Yaskawa brand-Japan, PLC-Siemens S7-200, screen-SiemensMP277, breake ...

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

x-travel: 800 mm y-travel: 800 mm z-travel: 710 mm Control: Heller Unipro 90 total power requirement: 62 kW weight of the machine ca.: 17 t dimensions of the machine ca.: m A Heller MCP-H 250, built in 1999, is for sale. The machine is expected to be available in February 2024 and can be viewed under power. Description Heller MCP H 250 Machine number 32-44117 Year of construction 1999 Control system: Heller Unipro 90 Spindle taper: SK50 Spindle speed: 45-6000 1/min Pallet size: 630x 500 mm Maximum table load (even): 800 daN Max. interference contour workpiece size: 900x1000 mm NC round table Pallet changing device Tool magazine chain: 52 places Longitudinal stroke axis X: 800 mm Cross stroke axis Z: 710 mm Vertical stroke axis Y: 800mm Machine weight: 16200 daN Power requirement: 62 KVA Furnishing: Measuring device for BLUM TC 50 Linear scales Heidenhain BKW cooling unit for spindle cool ...

Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger, jet stream, cooling fan -Manufacturer: Port-A-Cool, mobile cooling fan type PAC2K36HP220-50 -Fan: Diameter: 36 / 914 mm Speed adjustable -Operating pressure: max. 3.45 bar -Voltage: 230V 50Hz / 5.5A -Dimensions: 1575/820/H1590 mm -Weight: 112 kg with pallet

This HELLER MCP-H 250 Horizontal Machining Centre was manufactured in 1999 in Germany. It is equipped with a HELLER Unipro 90 control unit and a tool taper SK50. The pallet size is 630 x 500 mm and the spindle speed range 45-6000 rpm. It has a NC rotary table, a pallet changing device and a tool magazin (chain) with 52 places. As additional equipment it comes with measuring device for BLUM TC 50, linear scales Heidenhain, BKW cooling unit for spindle cooling, Knoll coolant system with vacuum rotary filter and sludge discharge, Knoll chip conveyor, BKW cooling unit for cooling lubricant system, work area flushing and 2 pallets. The machine is in good condition for its age. Annual maintenance has been carried out over the entire service life. In 2018, the machine was retrofitted with the latest interface/receiver for the Blum TC 50. It is still under production and can be inspected at any  ...