cooling used for sale

Product number:M15-4194 Cooling capacity:41,6 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:10 kg Voltage:400 Volt Power consumption:16,5 kW Dimensions:2085 x 1230 x 2300 mm Weight:1013 kg Year:2012 Number in stock:2 piece(s) Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. These chillers are equipped with an expansion tank and a water pump. Please visit also our website: used-refrigeration

Wolff Apparatebau KG blanching and cooling line consisting of: Van Wees mobile elevating belt: s/s frame, plastic belt with dividers, belt width: 175 mm, distance between dividers: 165 mm, divider height: 50 mm, elevating height: 2930 mm, total dimensions: 3300 mm x 1100 mm x 3000 mm, Wolff Apparatebau KG blanching machine, type: B950/3000, machine number: 93-962, year of construction: 1993, 380 V, 50 Hz, 6.5 kW, dimensions: 4650 mm x 1550 mm x 3050 mm Wolff Apparatebau KG cooling drum, type: TRK950/3000, machine number: 93-963, year of construction: 1993, 380 V, 50 Hz, 10 kW, dimensions: 4650 mm x 1500 mm x 2400 mm s/s filter tub with circulation pump, inside dimensions: 1000 mm x 1000 mm x 950 mm, dimensions filter tub: 1400 mm x 1000 mm x 1130 mm, s/s platform, dimensions: 4100 mm x 1800 mm x 1980 mm, 3000 mm x 1100 mm x 1980 mm, 2900 mm x 1800 mm x 1980 mm, s/s switch ca ...

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

Linear device for industrial cooling of fruit in Mega boxes Producer: Mega Year of production 2016 DTR-- yes Productivity - approx. 800 kg/h, IP 55 Installed power 15kW Number of showers 20 water in a closed system Machine dimensions 8180x2085x1940mm Filling height 1225mm Width 650mm Dump height 1105(1350)mm Description: the device is used to cool the product in 600x400mm boxes, cooling is based on transporting the packages while immersing the product in ice water. Weight 2440kg

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %

Tumbler Iglu Scheid with cooling Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW

Tumbler Ruhle with cooling Model: MKR 150 Volume: 150 liters Dimensions: 120x100x135cm Electrical power: 3kW

General SKU305U627 LocationBarneveld MakeStarick Fördertechnik GmbH TypeRFS-200/SoK Mach.No.1821.2694.01.05 Main Features Motor4 KW Length9520 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter219 mm Length9520 mm Between inlet and outlet7878 mm Shaft diameter133 mm Pitch185 mm InletDN200 OutletDN200 With jacketcheck (cooling) 6000mm long Max. temperature100°C With adjustable packing glandscheck Motor4kW, 400/690 Volt, 1452rpm Screw speed12/25 rpm MaterialStainless steel 1.4301 (304) Information Year of construction2005 Total height0,5 m CEcheck Floorspace9.0x0,5 m Weight900 kg ATEX compatiblecheck Extra Specificationswith new motor and gearboxNew arrivalsHorizontal screw conveyorsStarick Fördertechnik GmbHNew arrivalsConveying systems > Horizontal screw conveyorsBrand > Star ...

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.

Originated from LVD lasercutting machine

General SKU401S1130 LocationBarneveld MakeEmerson network power TypeHPF12U302A3P10020 Mach.No.10940780001 Main Features Heating (medium)Gas Temp.18 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck With coolingcheck Temperature18-27°C. With temperature controllercheck With controlcheck Information Year of construction2012 With switchcheck With switchgearcheck( as is) CEcheck Floorspace0,9x0,75 m Total height2,05 m Weight300 kg Extra Specificationsthis machine is used to cool airTemperature control unitsLiebert HPFHeat exchangers > Temperature control unitsBrand > Liebert HPF What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKU305U636 LocationBarneveld MakeEmde Nassau TypeTSK 250x8720 TL No.A412.0089 Year of construction2012 Main Features Motor4 KW Length8720 mm Inlet diameter210.1 mm Specified Features - Vertical screw conveyor Trough-modelcheck Diameter250 mm Length8720 mm Between inlet and outlet7880 mm Shaft diameter182 mm Inlet210.1 mm Outlet295 mm With jacketcheck 5000 mm long Max. temperature80°C With adjustable packing glandscheck Motor4 kW, 400 Volt, 1420/2860 rpm, (EX) Screw speed12/25 rpm Conveying height4587 mm With coverscheck MaterialStainless steel 1.4301 (304) Information Mounted inclined in framecheck Total height1,0 mtr Weight1338 kg CEcheck Floorspace10,3x0,4 m ATEX compatiblecheck Extra SpecificationsCool jacket length 5000mmNew arrivalsVertical screw conveyorsEmde NassauNew arrivalsConveying systems > Vertical screw conveyorsBrand > Emde Nassa ...

The Rivacold with model number QUM245Z0312 is a high-quality cooling unit designed for industrial applications. The system operates at a voltage of 400 volts and a frequency of 50 Hz and has a current consumption of 7.37 amps. This cooler provides reliable and efficient cooling performance for applications in the food, catering or retail industries. With a rated power of 245 watts, it is able to dissipate a considerable amount of heat and ensure a stable cooling temperature. The Rivacold QUM245Z0312 has high-quality components and is easy to install and maintain. Its robust construction and the use of high-quality materials make it a reliable and durable cooling system. In summary, the Rivacold with model number QUM245Z0312 is an excellent choice for anyone who needs a reliable cooling unit for industrial applications. Its high efficiency, stable performance and easy maintenance ...

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...

The Güntner air cooler with the model number GVVX 071.1B/3-MD.E and the fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, which makes it suitable for use in a variety of environments. This air cooler was manufactured in 2014 and has a sturdy construction that ensures its longevity and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow to achieve optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice ...

The Güntner air cooler with the model number GVVX 071.1B/3-MD.E and the fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, which makes it suitable for use in a variety of environments. This air cooler was manufactured in 2014 and has a sturdy construction that ensures its longevity and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow to achieve optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice ...

The Güntner air cooler with model number GVVX 071.1B/3-MD.E and fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, making it suitable for use in a wide range of environments. This air cooler was manufactured in 2014 and features a sturdy construction that ensures its durability and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow for optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice for coolin ...

The Güntner axial fan condenser with the device designation GVH 045.1A/2-NW. E is a high-quality cooling system suitable for a wide range of industrial applications. It was manufactured in 2013 and has a volume of 14.9 liters. This condenser is designed for a test pressure of 35.2 bar and can process a maximum temperature of 100 degrees Celsius. It is equipped with a high-quality axial fan, which ensures effective cooling. All other information about the system can be read from the type plate. The Güntner axial fan condenser with the device designation GVH 045.1A/2-NW. E is easy to install and maintain and offers a long service life. It is robustly built and can operate in demanding conditions, making it a reliable and efficient cooling system. Overall, the Güntner axial fan condenser with the device designation GVH 045.1A/2-NW. E is an excellent choice for those who need a h ...

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

Key data: 4000 mm, 2000 mm, 4400 W

BYSTRONIC ByStar 4020 laser cutting machine was built in 2006 in Switzerland. The machine, designed to cut workpieces made of among others stainless steel and aluminium, uses a laser beam with a power of 4.4 kW and a thickness of just a few μm, which guarantees the highest precision and energy efficiency at low operating costs. Laser cutting of workpieces with a maximum thickness of 25 mm takes place on a stable work table designed to provide unobstructed operator access to the workspace. After machining, the edges of the workpieces are distinguished by their unparalleled smoothness and absence of irregularities. The BYSTRONIC laser cutting machine is offered complete with equipment consisting of among others a BYSTRONIC CNC controller, a dust extraction unit and an EF COOLING cooling unit. The total weight of the machine is 18300 kg. Technical specifications of the BYSTRONIC BySt ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Overview This complete brewhouse was manufactured in 2016 by the German manufacturer Sudhausbau. The plant can be visited and tested at any time, as everything is still connected and in operation. Components Grist mill 1 piece grist mill 2 foot stands with rubber bumpers 1 additional larger hopper Throughput up to 200 Kg/h Brewhouse in stainless steel Cast wort/ brew 2 units steam heated Control system with automatic mashing Switch and control cabinet Completely wired and ready for connection Control cabinet assembly with: 1 x control via touch screen Siemens 9 1 x contactor circuit 0,37 KW agitator 1 x contactor circuit 0,37 KW chipper 1 x contactor circuit 230V/16A steam valve 2 x 24VDC outlet temperature sensor 2 x temperature measurement Analog input 4-20 Hardware and software The control unit with automatic mashing is designed for the connection of the agitator, chopper and 2 temper ...

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...

Used line for the production of the co-extrusion by PST Forming method. PTI - The twin screw extruder DS 92/28   2x screws with a diameter of 92 mm The length of screws 28 x L / D Snails closed system with internal temperature control, deep nitrided, with degassing on the cylinder, extruder equipped with a vacuum pump with filter, Siemens Servo Motor power: 60 KW Torque: Nm 15700 Screw rotation: 0 - 50 rev. / Min. Zones with ceramic heaters with an intense cooling: 5 x 5 KW Cooling Zones: 4 Performance with hard PVC, depending on the materials and tools: max.600kg / h Length: 4500 mm Width: 1600 mm Height: 2300 mm           Extruder equipped with a microprocessor control SIEMENS type Extrusion Pro Pak visualization 2. Co-Extruder PTI - The twin screw extruder DS 68/28 Snails with a diameter of 2 x 68 mm Length of the screws: 28 x L / D Snails cl ...

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Carrier 30RB0402–0379-PEE chiller – with a cooling capacity of 400 kW | ChillerTech - Used chillers available from stock! Comprehensive services in the selection of cooling technology, allowing us to maintain the highest standards and optimize the system for the individual needs of our customers. Innovative and easy-to-use cooling systems based on chilled water, enabling our customers to save nearly 45% per year. At the same time, the constantly expanding assortment of nearly 68 chillers available immediately allows us to make a professional selection in terms of cooling capacity, dimensions or type of components used in the device. Access to fully new as well as used chillers in the capacity range from 1 kW to 1.2 MW. High-performance, compact and, most importantly, completely safe devices in the field of cooling as well as stabilization of various technological processes. Tak ...

faceplate diameter: 3.000 mm swing diameter: 3.200 mm turning height: 2.200 mm Control: 840 D ShopTurn Siemens cross rail adjustment: 1.500 mm tool travel: 1.250 mm faceplate turning speed range: 0 - 120 U/min power capacity: 75 kW Driven Tool Stations:: speeds: 10 - 3.000 U/min output: 22 kW max. Torque: 320 Nm tool adaptor: HSK 160 (VDI 60) tool magazin:: number of toolpositions: 16 pos. weight of tools max.: 25 kg total power requirement: - kW weight of the machine ca.: 36 t dimensions of the machine ca.: 6,0 x 6,0 x 3,5 m Chip conveyor: Coolantsystem: C-axis: 0,001° hydraulic system: Tool Magazine: 16 pos. tool holders: div. Vertical Turning Machine KONRAD SEIDLER - Vertimaxx 3000 - including clamping material, various tool holders - 1x angle bore and milling head 90° Drive spindle according to SEIDLER HSK 160B Output spindle ABS 63 Gear ratio i 1:1 Max. speed 2300 rpm (co ...

9222022 Gas Generator CAT 4.5 Mwe and 4.3 MWe with Auxiliaries Two separate 4.5 MW and 4.3 MW / 50 Hz natural gas engine driven generating sets with auxiliaries. Manufacturing years 2016 and 2014, total operating hours 3000 and 1000 hours only. Engines are CAT CG260-16 type high efficiency 1000 rpm units coupled Marelli’s 11 kV air cooled alternator. Both units with full CAT service records, still installed and can be tested. Both units have engine cooling made with two closed loop cooling radiators, one for HT and another for LT engine cooling circuits. Equipment is close to new like condition. Technical characteristics Manufacturer: CAT, USA Manufacturing year: 2014 and 2016 Engine type: CAT CG260-16 Engine speed 1000 rpm Operating hours since new 3000 and 1000 only Alternator CAT/Marelli MJH 800 MC6, Cos Fee 1 Power output 2014 4100 kWe continuous load Power ou ...

LAMINATING SYSTEM POLYTYPE BB 2200 LAMINATION LINE Coating/- lamination equipment for solvent based resin system. On an existing film or composite material. Year: 2008 Condition: Excellent The different film thicknesses what can be used depending on the materials, see references: Plastic foils 25-250 microns Metal foils (copper, aluminium) 20-150 microns Total composite thickness max. 500 microns Machine data: Production speed 0 - 150m/min Production speed 840 - 2160mm Resin 1 - 40g/m2 Winding units (main winder-/ lamination winder-/tensilized film winder): For unwind of the base film there are two winders (main winder/ lamination winder). Winder performance: - Winding direction clockwise / anticlockwise - Brakes ystem for constant and regulated tension e.g. alu foil with max. 2000 kg roll weight - Roll system centerless for steel,plastic-, carton tubes with optimal  ...

Aseptic filtration system Mona. YOM 2008 Technical data: Capacity for concentrate: approx. 5.8 m3 / h (8000 kg / h). Plate filter area: approx. 55 m2. Control system: Simatic S7. The cooling capacity of device: 154 kW. Electric power connected: approx. 100 kW. Steam consumption: approx. 200 kg/h. Steam pressure: 2 Bar. The MONA system is used to improve the quality of the concentrate before loading. The quality is improved by pasteurization of the finished product with the possibility of its pre-treatment on a plate filter. The use of appropriate filter plates allows to reduce the turbidity of the juice and obtain better microbiological parameters by eliminating bacterial spores resistant to the temperatures used in pasteurization. Technical description of the device The device consists of the following elements: five-section plate exchanger, on which the temperature is  ...

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

Bakery shop fittings Aichinger ArtLine III sales counter 3.9 m shop counter bakery sales stand CoolMaxx HotMaxx CoolBottle, used from 11/2018 Type: ArtLine III Manufacturer: AICHINGER GmbH, Ostring 2, 90530 Wendelstein, Germany Purchase according to invoice: 11/2018 Properly and professionally dismantled and stored on pallets in our warehouse. Very good condition. Disc type: ARTLine OK 1252mm I ZP 330mm Countertop Type: Postforming APL Depth: 1060 Front Type: Decor APL Decor Edge: A1 MGM_Schwarz APL Postforming: G/A1 MGM_Schwarz Display: table-level Price bar: EV 1 Front décor top: E/H3395 ST12_Corbridge natural oak Front edge top: H3395 ST12_Corbridge natural oak Version: Standard (V20) Front profile: EV 1 Skirting board: EV 1 Pocket tray type: 1-tube/Waab CNS The shop fittings consist of: #Theke Free-standing end side for modules with glass attachment, ...

Temperature control units GWK central cooling system, project number 21 8729 Designed for: Cooling capacity 300 kW; at max. ambient temperature 32°C and cooling water flow temperature 20°C Composed of: Temperature control unit burner cooling Teco WCC100 / power 13.3 kW, nominal voltage 20.5A Temperature control unit heating roller 1 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 2 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 3 Tecma Wi 7.700.150D.150.D25, power 7.5 kW, nominal voltage 15A Temperature control unit cooling roller 4 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A Temperature control unit cooling roller 5 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A

Uniflair ERAF0521A chiller with 50 kW cooling capacity with Free cooling function and hydraulic module | ChillerTech - Used chillers available from stock! Basic information: -Manufacturer: Uniflair -Model: ERAF0521A -Cooling capacity: 50 kW (standard conditions according to suppliers' conditions) - Air-cooled unit -Refrigerant used as well as its quantity: R410A | section A – 7.50 kg -Number of refrigeration circuits: 1 circuit -Operation Mode: Cooling Only -Year of production: 2010 - Dimensions: Length: -- mm | Width: -- mm | Height: -- mm +/-5% -Quantity: 2 pieces -Hydraulic module: Yes -Free cooling: Yes Device available immediately Check out our other cooling/heating equipment...

SOLO 202 30/30/60 quenching machine built in 2001 in Switzerland, is a multifunctional machine used in the process of workpiece quenching. The quenching process improves the mechanical properties of the workpiece by increasing its strength and wear resistance. The machine’s extensive machining capabilities and high performance allow the following types of metal heat treatment to be performed: – austenitizing (in atmosphere, protective gas or nitrogen) – carburizing – carbonitriding – water quenching – tempering (without protective gas) – alkaline spray washing – annealing The SOLO quenching machine of multi-module construction is equipped with two quenching furnaces (a bell furnace and a tempering furnace), two tanks (an oil bath and a water tank) and a spray washing machine with a two-section oil separator for load washing. The furnaces, made of top-quality she ...

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

OBTAINING LIQUIDITY - LEASING / HIRE-PURCHASE POSSIBLE ASK FOR AN INDIVIDUAL NON-BINDING OFFER! LEASING POSSIBLE FROM 674,-€ This is a NEW blast chiller / blast freezer from the manufacturer Irinox, type MF 100.1. This is a device for blast cooling/blast freezing hot food or unprocessed foods. A sturdy stainless steel entry ramp for the trolley. The system is an exhibit of a trade fair, still unused. The external refrigeration unit UC100 is still in its original packaging and is new. The cell may show minimal signs of use due to transport. The RRP for the MF 100.1 including the refrigeration unit is: € 51,592 net. + VAT. IMMEDIATELY AVAILABLE FROM STOCK ! OUR USED EQUIPMENT SERVICE FOR YOU: - 12 months warranty by Irinox - High-quality branded devices at fair prices - Professional and competent advice - before and after the purchase - Shipment or self-collection ...

Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling unit  ...

x-travel: 3.000 mm y-travel: 1.600 mm z-travel: 1.200 mm control: HEIDENHAIN iTNC530 HSCI B-axis (swivelling head): +/- 100 ° C-axis (milling head rotation axis): +/- 240 ° feed and rapid traverse: : rapid feed Y,X,Z: 40.000 m/min Rapid traverse B- and C-Axis: 50 rpm Accelerations (X, Y and Z): 4 m/s² Machine table:: : Clamping surface: 3.500 x 1.750 mm T-slots: 27 x 22 mm H12 T-slot - distance: 125 mm max. workpiece load: 7.000 kg/m2 Max. distance table to spindle nose: 1.356 mm 2-Axis Fork Milling Head T21C: turning speed range:: 10- 24.000 min-1 Drive power (S1/S6):: 42/50 KW Torque (S1/S6):: 67/84 Nm Tool bore: HSK-A 63 tool magazin:: : number of tools: 50 tool holder: DIN 69873 HSK A63 Max. Ø tool: 115 mm max. tool-Ø adjacent slots free : 125 mm max. tool length: 300 mm max. tool weight: 12 kg coolant equipment: : tank capacity: 1.400 l connected load: voltage: 3x 40 V 50 Hz  ...

Cylindro-conical fermentation and storage tank. - ammonia cooling, 1 x cone cooling jacket, 2 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve, Additional title: Outdoor tanks for storing fluids, Capacity: 622 hl, Operating pressure: 2 bar, Length: approx. 12500 mm, Width: approx. 3100 mm, Height: approx. 3100 mm, Weight: 4600 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 6 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; sight glass; temperature measurement

Cylindro-conical fermentation and storage tank. - ammonia cooling, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve, Additional title: Outdoor tank for storing fluids, Capacity: 964 hl, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Cylindro-conical fermentation and storage tank. - ammonia cooling, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve, Additional title: Outdoor tank for storing fluids, Capacity: 964 hl, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; temperature measurement

Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt, Additional title: 5 Outdoor tanks, Capacity: 580 hl, Operating pressure: 2 bar, Operating temperature: 20 °C, Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling, Material: stainless steel, Position: vertical, Base construction: Short skirt support, Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve

Cylindro-conical 622 hl fermentation and storage tank. - ammonia cooling, 1 x cone cooling jacket, 2 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve, Additional title: Outdoor tank for storing fluids, Capacity: 622 hl, Operating pressure: 2 bar, Length: approx. 12500 mm, Width: approx. 3100 mm, Height: approx. 3100 mm, Weight: 4600 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; sight glass; temperature measurement

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

ZKG tanks / storage tanks / tank / pressure tanks in V2A with cooling jacket and insulation Operating pressure: 3.0 bar test pressure: 4.0 bar Capacity: 2,800 litres NEW! Surface: inside and outside 2B = IIIC material: V2A (AISI 304) 1.4301 Top shelf: â?¢ with 2 loops â?¢ with threaded weld NW 25 â?¢ with CIP cleaning NW 40 â?¢ with below drawn pipe DN 32 with fermentation sheet pile valve (with pressure relief valve, with pressure gauge)(gegen Aufpreis) Tank cylinder: â?¢ with wire hook up â?¢ with manhole oval 430 x 330 mm, with handle â?¢ with cooling jacket H = 750 mm and with insulation â?¢ with test valve DN 15 with spiral in V2A (extra charge) â?¢ with Tauchschafthülse with temperature display (extra charge) â?¢ on the back of the tank 2 x connecti ...