cooling used for sale

Many thanks for your interest on our new cooling table for chocolate or sugar-, candydough, please find follow our offer: cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 2000 x 1500 x 750mm Or : 2500 x 1000 x 750mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: - folded plates made of stainless steel - Standing on 4 feet, (square tube 80 x 80 x 5) - foldable edge from square tube 40x40, - 1 x safety valve 0.5 bar) - 1 x Pipes for water circulation I offer this machine as New machine

EVAPCO LRT 3-62 Product number:M18-3193 Cooling capacity:170 kW Number of fans:1 Refrigerant:Water Voltage:400 Volt Motor power:1,5 kW Dimensions:3100 x 1100 x 2100 mm Weight:700 kg Number in stock:1 piece(s) Nice Evapco cooling tower with 1 fan. Mentioned capacity at a water temperature of +32/27°C (inlet/outlet) and a wet bulb temperature of +22°C. Please also visit ou website: used-refrigeration

BKW - WATER HEAT EXCHANGER Top condition little in use as good as new condition BKW WATER/WATER HEAT EXCHANGER RWT30-1KKP Manufacturer: BKW Kälte-Wärme-Versorgungstechnik GmbH Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT30-1KKP Cooling capacity: 10.0 kW Connections: R3/4" IG Cooling water consumption: approx. 29.0 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: 27.0 °C Water outlet temperature: 25.0 °C pressure loss: 0.6 bar Operating weight: 170 kg Filling capacity of the water tank: 40 liters Pump power (50Hz): 70 / 4.1 l/min / bar Pump power (50Hz): 100 / 3.0 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 4 ...

Composite equipment Bitzer with original condenser Freezer / normal cooling -4x compressor Bitzer 6F-40.2Y -Cooling capacity: 330 kW at -10oC/40oC, 180 kW at -25oC/40oC, 100 kW at -35oC/40oC -Volume: 4 x 151.6 m3 -Number of pieces in stock: 2 pieces -Refrigerant: Freon -With original condenser -In very good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Steel hall, cooling hall sandwich panels clad used used Tem. Range approx. 3-12° C Walls: sandwich panels, PU foam approx. 100 mm Roof: trapezoidal sheet + 2x 60 mm insulation + rubber skin with jumper system and dehumidification The hall is separated in the middle by a partition wall. the cooling system is not part of the offer for the time being. In both halves there are 2 rows of double shelves, in the middle with autom. Shelf assemblers Shelf manufacturer: SCHÄFER Year of construction: 2006 approx. 4700 pallet spaces Galvanized steel sheet Shelf depth: approx. 1000 mm Compartment height approx. 1800 to 2000 mm Compartment width approx. 2900 mm compartment load 2x24 kN field load 537.6 kN Total dimensions approx. 50 x 15 x 30 m (LXWXH) Changes and errors in the technical data, information and prices as well as prior sale reserved.

GWK KU 90-108 Process Cooling Heat exchanger radio stainless steel FP 50-91 , 1006 kW Flow rate operating water circuit: 92 qm/h Cooling water circuit: 109 sqm/h Connection power: 22kW Head: 52 mWS 2 pieces available

Belt: app. 880m long x 48,9cm wide with 12,5 cm clearance between levels Drum drives: 3 drives (2 x 1.1 kW + 1 x 1.5 kW) Tensioner drive: 0.37 kW Cooling: 3 x 5.5 kW fans Cooling agent: Ice Water app. 2C. Inlet temperature: 60-80C Outlet temperature: 20C Holding time: 60-120 min adjustable. Capacity: app. 2.5-3 tons per hour Manual: Available Spare parts: 1 x main bearing, 2 x drum transmission Condition: Good, disconnected from operation in May 2019

BKW -KÜMA WATER/WATER HEAT EXCHANGER Top condition little in use BKW WATER/WATER HEAT EXCHANGER RWT10-1KK Manufacturer: BKW Kälte-Wärme-Versorgungstechnik GmbH Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT 10 -1KK Cooling capacity: 6.0 kW Cooling water consumption: approx. 17 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: max. + 30.0 °C Water outlet temperature: max + 35.0 °C pressure loss: 0.6 bar Operating weight: 170 kg Filling capacity of the water tank: approx. 40 litres Pump power (50Hz): 65 / 2.5 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 400 / 50 V / Hz Control voltage: 24 VDC Total electr ...

BKW -KÜMA WATER/WATER HEAT EXCHANGER Top condition little in use KÜMA-BKW WATER/WATER HEAT EXCHANGER RWT30-1KKP Manufacturer: KÜMA – Apparatebau Gmbh&Co KG Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT30-1KKP Cooling capacity: 10.0 kW Connections: R3/4" IG Cooling water consumption: approx. 29.0 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: 27.0 °C Water outlet temperature: 25.0 °C Weight: 130 kg Filling capacity of the water tank: 40 liters Pump power (50Hz): 70 / 3.4 l/min / bar Pump power (50Hz-60Hz): 100 / 2.5 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 400 / 50 V / Hz Control voltage: 24 VDC  ...

- Cooling water line cooling water pipe MWM 12300128 - Suitable for several motors - Please note! Price per piece! - References -> 12300129 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By co ...

Process chiller / chiller water-cooled, Type: Aquarius G2 - AQG2 1401, Green Refrigerant R513A, MTA S.p.A. The Aquarius G - AQG2 1401, 2601 are water/water chillers for indoor installation. Shell-and-tube evaporators, Bitzer screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 351 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.2 Cooling water temp. Exit/Entry (°C): 35 / 30 Volume flow (m³/h): 73 Refrigeration circuit: Refrigerant R 513A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 128 Max. current (A): 209 Starting Current Circuit (A): 341 Protection class: IP54 Dimensions: Length (mm) ...

Process chiller / chiller water-cooled, Type: AQUARIUS PLUS 2 – AQP2 2601 MTA S.p.A. The Phönix AQUARIUS PLUS 2 – AQP2 2601 are water-to-water chillers for indoor installation. Shell-and-tube evaporators, Handbell screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 654 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 112 Cooling water temp. Exit/Entry (°C): 35 / 30 Flow rate (m³/h): 134 Refrigeration circuit: Refrigerant R 134A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 215.03 Max. current (A): 356.88 Starting Current Circuit (A): 602 Protection class: IP54 Dimensions: Length (mm): 432 ...

Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...

Industrial cooling system , Cooling capacity 3000 kcal/h , 24 bar ,380 V , 50 Hz , 4,9 A , 2,5 kW

Immersion pump, cooling lubricant pump, Z50-16/2-5,5, 5,5KW, 36m³, 2,1bar, Schmalenberger, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with storage traces! The part was purchased from a spare parts warehouse of a company, was there for some time in stock but never in operation and has minor storage traces. Immersion pump, cooling lubricant pump, Z50-16/2-5,5, 5,5KW, Schmalenberger, as good as new - 400V, 5,5 KW - 2,1bar, 36m³/h - 128 x 35 x 35cm, approx. 100kg - immersion depth 75cm, Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Cooling unit Water recooling unit DALEX type DRF 2 Masch. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar refrigerant R 134a Device was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litres Mains connection 380 volts , 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg good condition; used

New cooling water distributor 25 duct with very high-quality components - ready for connection The manifold was made for a large vacuum system, which was then not accepted. It was made in 09/2018 and then fully shrink-wrapped and packed in a box. Today the distributor was unpacked for photos. - 25 cooling circuits - 3 x ifm SM8000 magnetic-inductive flow meter - 22 x ifm SM6000 magnetic-inductive flow meter - 4 x ifm AL1222 IO-Link master with EtherNet/IP interface - A VA ball valve from ECON at the supply and return, 50 pieces in total (different sizes) - a Swagelok proportional RL3 overflow valve on each channel (various dimensions) - Pressure and temperature measurement in flow and return - Swagelok fittings The distributor is about 3m wide. It can be viewed by appointment in Dreye near Bremen

Vacuum pump system, vacuum pump EDWARDS GV600/EH4200+SSP+DIR COOLING+SIL. NRB48400 Pressure range: FULL VAC TO 0,5 BARG System voltage: 380 - 415 V 3AC 50 Hz Vacuum pump: GV600 Motor: WEG 180M-02 22 kW 2935 - 2950 rpm 380 - 415 / 660 - 690 V 3AC 50 Hz IP54 mechanical verstBooster ): EH4200 Engine: LEROY SOMER LS160MPT 11 kW 2935 - 2950 rpm 380 - 415 / 690 V 3AC 50 Hz IP55 Cooling water: 8.5 l/min used, tested ! Dimensions ( ready for use ): 2000 x 1120 x 1420 mm Dimensions ( transport ): 2000 x 950 x 1420 mm

Twist drill with internal cooling RWR SBV 11,65x70x12x118 ( SBV11,65x70x12x118 ) with internal cooling IA52187 Ø 11,65 mm shaft Ø 12 mm spiral length 70 mm Total length 118 mm New ! Dimensions: 125 x 17 x 17 mm

Control cabinet cooling unit, control cabinet cooling unit TRAUB 380 V 3 AC spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 490 x 320 x 1320 mm

Cabinet Cooling Unit, Cabinet Cooling Unit PFANNENBERG DTS 73.. (1500 watts) 220 V Dimensions: 390 x 220 x 1350 mm

Cooling module for welding machines, circulating air cooling module for water-cooled welding machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm

Cooling package, radiator with fan, cooling fan, oil cooler SETRAB K38 - 0708 S ( K38-0708S ) CP8 - 640M18 640M198M14 Cooler : 240 x 45 x 300 mm Fan: Ø 220 mm 0,0,11 KW 2650 rpm 230 / 400 V used, tested ! Dimensions: 330 x 270 x 310 mm

Enclosure cooling unit, air / water heat exchanger RITTAL SK 3373100 Effective cooling capacity: 2000 W operating pressure: 1 - 10 bar 0.038 / 0.043 kW 230 V 1AC used, tested ! Dimensions: 990 x 400 x 160 mm

Enclosure cooling unit RITTAL SK 3296 rated power: 395 W effective cooling capacity: 800 W 230 V 1AC Temperature range: +20°C to +55°C IP34 / IP54 used, tested ! Dimensions: 660 x 440 x 310 mm

Enclosure cooling unit RITTAL SK 3383100 Rated power: 690 W Net cooling capacity: 1000 W Rated voltage: 230 V 1AC rated current: 4.9 A Temperature range: +20°C to +55°C IP34 / IP54 used, tested ! Dimensions: 600 x 470 x 450 mm

Enclosure cooling unit RITTAL SK 3296.100 rated power: 615 / 800 W Effective cooling capacity: 330 / 390 W Nominal voltage: 230 V 1AC rated current: 3.2 A IP34 / IP54 used, tested ! Dimensions: 600 x 465 x 355 mm

enclosure cooling unit, enclosure cooling unit RITTAL TOP THERM PLUS SK 3303500 suitable for PC cabinet EL407 ! 20°C to 55°C 230 V used ! Dimensions: 280 x 230 x 550 mm

Step drill with internal cooling GÜHRING diameter: Ø 25.0 x 14.5 x 17.0 mm solid carbide DK480UF Shank: Ø 25 mm with internal cooling ! New ! Dimensions: 120 x 25 x 25 mm

Step drill with internal cooling GESAU diameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 ) shank: Ø 25 mm with internal cooling ! New ! Dimensions: 110 x 25 x 25 mm

Step drill with internal cooling GÜHRING diameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm ) solid carbide DK480UF shank: Ø 25 mm with internal cooling ! sanded ! Dimensions: 120 x 25 x 25 mm

Heat sink with liquid cooling AMK TYPE OH 7 200610 Cooling surface: 680 x 332 mm Material thickness: 21 / 24 mm Material: aluminum coolant connection: DN10 Groove width: 8 / 13 mm Groove depth: 13 mm 8x threaded bore: M6 x 1.0, depth: 15 mm 4x bore: Ø 9 / 15 mm, depth: 9/ 24 mm hole spacing: 250 / 600 mm spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! used, tested ! Dimensions: 710 x 332 x 28 mm

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump, slurp submersible pump -Manufacturer: Brinkmann, cooling water pump submersible pump type TB ... -Power: rpm -Immersion depth: 115 mm -Flow rate: /min -Hole circle: Ø 115 x 7 mm -Dimensions: 167/130/H250 mm -Weight: 5 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, separating hood compressor, separating hood compressor, cooling unit -Handover: in the current condition as seen -Pipe: See photos for damage -Manufacturer: Danfoss, refrigeration compressor cooling unit -Compressor: Type 2515 -Perfomance: -Voltage: 220V/50Hz -Dimensions: 650/425/H400 mm -Weight: 39.7 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump, slurp submersible pump -Manufacturer: Brinkmann, cooling water pump Schlürf submersible pump type TL 50/140 001 -Power: 0.22 kW / 2700 rpm -Immersion depth: 145 mm -Flow rate: 40 l/min -Bolt circle: Ø 115 x 7 mm -Dimensions: 200/130/H330 mm -Weight: 6.4 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Cooling water pump: coolant pump -Engine: ATB Sever 1.ZK 71A-2 -Power: 0.37 kW / 2750 rpm -Immersion depth: 240 mm -Bolt circle: Ø 115 x 7 mm -Overall dimensions: 190/130/H510 mm -Weight: 11.8 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: MG Electric, cooling water pump type GQ5/2/A -Power: 120W / 2800 rpm -Immersion depth: 210 mm -Flow rate: 55 l/min -Bolt circle: Ø 115 x 6 mm -Dimensions: 180/130/H390 mm -Weight: 6 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens - Schuckert, cooling water pump type W28/270 -Power: 0.2 kW / 2840 rpm -Immersion depth: 265 mm -Dimensions: 320/190/H480 mm -Weight: 12.8 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Jor Wei, cooling water pump from Amada HA-400W hacksaw -Power:. 0.186 kW -Speed: 2850 rpm -Immersion depth: 240 mm -Dimensions: 215/260/H415 mm -Weight: 15 kg

Cooling conveyor belt, cooling belt, conveyor belt, belt conveyor belt, conveyor belt, belt conveyor -Frame: made of stainless steel VA -without control -Belt width: 800 mm -Length below: 8500 mm above: 7300 mm -Dimension: 8500/1600/H2200 mm -Weight: 2000 kg

Rofin RoHS WKH/W-13000-W-MC-SON-3-D Laser Cooling Laser cooling Rofin RoHS WKH/W-13000-W-MC-SON-3-D Rofin Controller LasCon WaC 2 Störk Tronic Thermostat Controller Buschjost Solenoid Valves 400 volts Unused stock items More items new and used - can be found in our shop! International shipping costs on request!

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens, cooling water pump -Power: kW / rpm -Pressure: max. 2 bar -Immersion depth: 170 mm -Dimensions: 150/130/H320 mm -Weight: 3.2 kg

Inv. Num. : 7039 Type:- Producer: ONI Created: 2010 Parameters: Cooling capacity: 250 kW Equipment: Outdoor Cooling Tower

We offer: Chiller Air-cooled chiller Climaserv GFC-F 260 ST 260 kW Cooling capacity in container outdoor standing on the roof The machine was used to cool the liquid circuit of the waste heat generated in the wallpaper production plant during the printing process. The system comes from a vinyl structure wallpaper manufacturer. The buyer is responsible for the dismantling, loading and transport from the specified location in the hall of the purchased machine. Costs: approx. 2500 € net.. Offer is outdated. Specifications Basic: Manufacturer: Geoclima S.r.l. Type: Climaserv GFC-F 260 ST Type of installation: Container on roof in the open air Series: CS 9010 Year of construction: 06/1999 Power consumption:101,5kW Rated Current:162.5A Starting Current:301A Max.Operating Current:225.5A Operating Current: 400V/50Hz/3~/PE Control current: 230-24V/50Hz/1~/PE Metric ...

Cat. No. 11-3600-1 New V2A storage tank / combination tank / stacking tank with cooling jacket - 1000 + 500 litres Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (Basei): 1000 litres top (stack): 500 litres Base tank height (bottom): 2085 mm Stacking tank height (top): 1050 mm Total height: 3135 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 ...

Cat. No. 11-3600-3 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 1000 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 1000 litres on the top: 800 litres Height on the ground: 2085 mm Height on the top: 1550 mm Total height: 3635 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobil ...

Cat. No. 11-3600-4 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 500 litres Height on the ground: 1835 mm Height on the top: 1050 mm Total height: 2885 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-5 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 600 litres Height on the ground: 1835 mm Height on the top: 1200 mm Total height: 3035 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-6 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 800 litres Height on the ground: 1835 mm Height on the top: 1550 mm Total height: 3385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-7 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 500 litres Height on the ground: 1485 mm Height on the top: 1050 mm Total height: 2535 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...