cooling tower used for sale

Cold room door Pfeuffer type 0809

Auction-ID: A1-41278-944

For sale: Lot of 2 Carrier Carlyle semi-hermetic reciprocating compressors (06EA Series), originating from industrial surplus. Widely used in industrial refrigeration, cold rooms, commercial HVAC, and process cooling. The units are delivered as shown in the pictures, preserving their original nameplates and technical specifications. COMPRESSOR 1: • Model: Carrier Carlyle 06EA265 600 EE (Serial: T2E207143) • Design: 6 cylinders / Semi-hermetic reciprocating • Power: 25 HP • Power supply: 400 V · 50 Hz · 3-Phase • Current: 48 A • Speed: 1,450 rpm • Max working pressure: 21 bar • Compatible refrigerants: R12, R22, and R502 (Oil charge: approx. 9L) • Year: 1992 COMPRESSOR 2: • Model: Carrier Carlyle 06EA575600 (Serial: 0599J02415) • Design: 6 cylinders / Semi-hermetic reciprocating • Motor model: 6EACCD1B2D41 (Made in USA) • Power: 30 HP � ...

New repair kit for a Volvo Penta TMD 122A cooling water pump List price of the package 650,-€ consisting of the following parts: 1 Piece Repair Kit 8767628 1 piece gasket 862596 1 piece gasket 422171 1 piece gasket 423351 3 pcs hexagon screw 955542 10 pcs hexagon screw 955536 1 piece plug 968146 2 pieces of V-belts 966959

Auction-ID: A1-48764-2560

The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 500 liters Machine dimensions in cm: Length: 178 Width: 102 Height: 155 Electric power: 3 kW

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW

Control cabinet cooling unit, control cabinet cooling unit TRAUB 380 V 3 AC spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 490 x 320 x 1320 mm

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1500 liters Machine dimensions in cm: Length: 240 Width: 144 Height: 210 Electric power: 5 kW

Refrigeration unit THERMOTEK Type: P705-14974-1-U Cooling capacity: 400W max 18.5 bar Pump: 5 l/min 3 bar 0.5 kW 230 V New ! Dimensions: 580 x 420 x 240 mm

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW

Control cabinet cooling unit, control cabinet cooling unit PFANNENBERG DTS 73.. (1500 watts) 220 V Dimensions: 390 x 220 x 1350 mm

Twist drill bits with internal cooling RWR SBV 11,000 65x70x12x118 ( SBV11,65x70x12x118 ) with internal cooling IA52187 Ø 11.65 mm shank Ø 12 mm spiral length 70 mm total length 118 mm New !' Dimensions: 125 x 17 x 17 mm

Refrigeration compressor, compressor for medium temperature range MANEUROP MT 125 HU 6D ( MT125HU6D ) I max: 43 A 220 V 3AC approx. 2.2 m connection cable used, tested ! Dimensions: 400 x 400 x 600 mm

Cooling Module for Welding Machines, Convection Cooling Module for Water-Cooled Welding Machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm

Ladle cooling fan, centrifugal fan, radial fan VAUPEL WAVASO 18.025 - H Air capacity: 4,500 m3/h Motor : 7.5 kW 2900 rpm 400 V drivable ! used, tested !' Dimensions: 1500 x 1500 x 1500 mm

Cooling aggregat ZCH -3 - NEW External dimensions: L 1300 x W 750 x H 1250 mm Weight: 190 kg Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała Identyfikator VAT: PL547-17-47-669 tel. 0048/33 812 58 60 Faksu. 0048/33 812 58 36

Cooling Package, Radiator with Blower, Cooling Fan, Oil Cooler SETRAB br /K38 - 0708 S ( K38-0708S ) CP8 - 640M18 640M198M14 Radiator : 240 x 45 x 300 mm Fan: Ø 220 mm 0,0,0 11 KW 2650 rpm 230 / 400 V used, tested ! Dimensions: 330 x 270 x 310 mm

- Number of sections: 1 - Capacity: 1000 l/h - Connection: Clamp 50.5 mm - In good condition

Cooling fan for engine brake, external fan LENZE A 29130 motor: 0.048 kW 220 / 380 V Inner diameter: Ø 154 mm New ! Dimensions: 156 x 205 x 156 mm

Year: 2001 serial number: 0940/01 operating pressure: 8 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control cabinet cooling unit, control cabinet cooling unit RITTAL TOP THERM PLUS SK 3303500 suitable for PC cabinet EL407 ! 20°C to 55°C 230 V used ! Dimensions: 280 x 230 x 550 mm

Stainless steel bar belt for Technopool spiral cooler Length (linear metres): approx. 260 - 280 m Total width: 900 mm Working width: 760 mm Distance between rods: 30 mm Availability: as of now

Control cabinet cooling unit, control cabinet cooling unit MCLEAN MIDWEST SLIMBOY 28-0626-G005 Useful cooling capacity: 1582 / 1758 W 230 V 60 Hz used, tested ! Dimensions: 990 x 250 x 730 mm

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

Step drill with internal cooling GÜHRING diameter: Ø 25.0 x 14.5 x 17.0 mm solid carbide DK480UF shank: Ø 25 mm with internal cooling ! New ! Dimensions: 120 x 25 x 25 mm

For sale is a V-cooler of the brand Güntner Year of construction 2020 L= 4700 mm W= 1500 mm H= 1900 mm G= approx. 1.6 to Power 350 KW Admission 86° Outlet 72° Volume flow 23 m³ / h Price € 14,500 + VAT little run Very good condition

Step drill with internal cooling GESAU diameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 ) shank: Ø 25 mm with internal cooling ! New ! Dimensions: 110 x 25 x 25 mm

AIR CONDITIONING PANELS FOR DATA CENTER HIROSS 20 INITS YEA 1998 also other data center equipment chiller computer bay technical floor and others

Step drill bit with internal cooling GÜHRING diameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm ) solid carbide DK480UF shank: Ø 25 mm with internal cooling ! ground !, Dimensions: 120 x 25 x 25 mm

Height=1.88 m, Overall length= 3.2 m, Overall width= 1.1 m, Net weight= 900 kg,

Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,

IKS Cooling System

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition

Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 [ 5000 characters max., no information on the advertiser ] Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 [ 5000 characters max., no information on the advertiser ] Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 Description Tank topstock: Manhol ...

Power 4.3 kW, 220 V 50/60 Hz, Weight 57 kg R410A refrigerant. 1000 g 5 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg R410A refrigerant. 970 g 3 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

Hyfra Cooling Water Recirculating Cooler CWK70 Power range: 6.4 kW Year of construction 2009 Refrigerant R410A Mains voltage 400V / 16 A / 3Ph Hose connection 3/4" ID19 VAT is shown EXW, pickup available without warranty

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.

1.250 litre, Stock number: T3552, Litre: 1.250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cooling tank, Standing: Frame with 6 pcs. legs, Top: Open, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Motor: Cooling compressor, Inner diameter: Ø 1300 mm., Outer diameter: D 1420 mm., Dimensions: L 2170 x H 1200 mm., Manufacturer: Alfa Laval

Cooling unit, cooling water recirculating cooler, water cooler, chiller O. HellwigYear of construction: approx. 1995Cooling capacity approx. 6 kWNight cooling unit 3 kWaverse refrigerant R422DWasser tank capacity approx. 35 litresFlow volume circulation pump 40 litres/minPump capacity 0.63 kWWasser connections 1/2 inchMains connection 380 volts, 50 Hz- temperature setting via rotary potentioSpace requirement L x W x H 1100 x 750 x 140 mmWeight 285 kg; used

Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2

Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller year of construction:2008 Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

- Year of construction: 2022 Cooling: - from 30 °C to 25 °C = 29 kW - from 15 °C to 0 °C = 15.4 kW - Connected load : 8.8kW, 15.6A - Dimensions : 1.05m x 1.05m x 1.75m (L x W x H) - Machine in very good condition - Very few hours of operation!

Properties Volume 12850 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4600 mm Height 2000 mm Diameter 2400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20°C Description Topsoil: Clapper bottom Downward-swept filling line DN50 CIP Cleaning Pressure fitting Tank cylinder: Cooling coil Ladder hooks Sample tap 5/8" Clear drain with threaded weld-on nozzle DN65 Level Indicator - Hose Subsoil: Clapper base 60° with cooling pipes Residual drain thread neck DN32 Conical flange DN 600 with outlet DN80 with disc valve 4 profiled feet with calottes height-adjustable

IKS cooling unit 20.4 kW Manufacturer: IKS Series: IPE 051 Refrigerant: R407 C Quantity: 3.1 kg Max. pressure: 27.6 bar Temp. min/max: -10/55C Cooling capacity: 20.4 kW Compressor input power: 5.6 kW Temperature constancy: 2 K Tank capacity: 110 litres Water connections: 1 1/4" AG inches Cooling air volume: 5370 m3/h Mains connection: 400/50/3 V/Hz/Ph Net weight: 300 kg Dimensions: LxWxH 980 x 800 x 1785 mm More items - new and used - can be found in our shop! International shipping costs on request!