cooling table used for sale

Additional title: y. o. c.: mostly 2003, Finished wort: 15000 l , Grist: 2500 kg, Current: three-phase A.C. current, Voltage: 400 V, Frequency: 50 Hz, Features: lauter tun, low pressure cooking wort copper-whirlpool system with external wort boiling system, additional whirlpool, trub collecting unit, hop dosage , Periphery: lauter wort heater, vapor condenser

NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control, Additional title: refrigerant ammonia, Brew water flow: 5 m³/h 2 bar, Ice water flow: 15 m³/h 2 bar, Refrigerant capacity: 85 kg Ammonia, Compressor capacity: 145 m³/h, Power: Q0: 2 x 119 kW, Operation / Control: Siemens S7, Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pum ...

Volume-dependent dual system, Additional title: Separator, condenser and control cabinet from 2010, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet

A Sandern vacuum calibration and cooling tank is offered. Max. pipe diameter: 125mm, tank length: 6000mm, number of chambers: 2. Dimensions X/Y/Z: 6500mm/1000mm/1500mm, weight: 1500kg. Inspection by appointment possible.

Cooling system Weidenreich BJ 2014

Features: Overall height 1411 mm Diameter 700 mm Weight 80 kg Description Operating pressure: +2.0 bar Pillow Plate/ Interior Permissible. Operating pressure: +3.0 bar/ +2.0 bar Test pressure: +5.1 bar/ +3.4 bar Permissible. Operating vacuum: -0.15 bar/ -0.15 bar Permissible Operating Temp: +80/-10°C/ +130/-10°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Topsoil: - Stable stacking crown - Manhole cover round 400 mm with 2 x handle - Weld-on nozzle DN 50 (blind cap DN 50 for an extra charge) - 1 x pressure relief valve - 1 x CO2 aeration valve - 6 x star head screws Cylinder Bottom: - With cooling jacket - Connections for cooling jacket on the back and side inlet and Outlet - With tasting tap DN 25 (on extra charge) -with dip shaft sleeve with tempe ...

Cat No.: 26-0064 Features Volume 1000 L Material No. V2A Exterior Surface IIID Surface inside IIID Total height 1845 mm Cylinder height 1250 mm Diameter 1130 mm Weight 184 kg Description Topsoil: Clapper bottom Threaded Socket DN50 Manhole CIP Connector Airlock connection DN50 Cylinder: Cooling jacket Insulation Level indicator Sample tap DN25 Dip Shaft Sleeve for Thermometer Underbody: Forward-drawn residual drain pipe with disc valve DN50 4 feet

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

TIG-TIG Welding Machine Oerlikon DTW 251 A The device is untested. A suitable hose package is missing. The Oerlikon TIG welding hose shown does not have the correct connections, an adapter is missing (TIG connection adapter for the old Oerlikon central connection) Manufacturer: Oerlikon Schweißtechnik GmbH, Eisenberg/Palatinate. Made in Germany. Technical data: Mains connection 380 volts. Welding range 5 - 250 amps. Welding performance: 250 A / 20 V at 60% ED. 200 A / 28 V at 100% ED. Water cooling. High-frequency ignition (HF). Pulse welding function to minimize warping. Adjustable lowering current (crater fill flow). Also suitable for welding with rod electrodes. Condition & Scope of Delivery: Attention: Oerlikon TIG adapter is missing. Oerlikon hose package (not suitable!), TIG welding torches, remote control, and ground cables. Without gas bottle.  ...

Features Volume 53800 L Material No. V2A Operating pressure 2 bar Working temperature 20 C Total height 10870 mm Diameter 3260 mm

OLAER CW 19 NBSQC ist ein Oelkühlgerät ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten: Abmessungen – Länge 700 mm, Breite 450 mm, Höhe 360 mm. Hauptspezifikationen: Anschluss 50 Hz 3x: 400 Volt; Leistung der Heizung 2 kW; Maschinengewicht ca. 48 kg. Ermöglicht enge Toleranzen; typische Anwendungen: Automobil, Werkzeugmaschinen, Hydraulik, Luftfahrt. Technische Daten ohne Gewähr

STUDER ist eine Kühleinrichtung, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten wie Durchmesser oder Verfahrwege sind nicht angegeben. Technische Hauptdaten: Eigengewicht 500 kg; Abmessungen L 1400 mm x B 1000 mm x H 2300 mm. Keine speziellen Zusatzausrüstungen angegeben. Eignet sich zur Erzielung enger Toleranzen und findet Anwendung in Branchen wie Automotive, Luftfahrt, Medizintechnik, Uhrmacherei und Maschinenbau Technische Daten ohne Gewähr

Features: Volume 2750 L Material No. V2A Max. operating overpressure 2 bar Total height 2850 mm Diameter 1540 mm Outer diameter 1550 mm Surface inside 2B=IIIC ground Surface outside glass bead blasted Description: Topsoil: Clapper bottom/ curved back Flange cover diameter 450 mm Connection overflow pipe DN40 outgoing laterally Threaded welding nozzle DN65 with disc valve Threaded Welding Nozzle DN65 2 x Threaded Weld-on Sockets DN25 Cylinder: Ladder hooks downward-drawn CIP cable DN40 4 x cooling coil 70 mm wide Temperature sensor Fischer Weld-on socket DN15 Underbody: Cone base with cooling jacket 35cm high Side threaded welding nozzle DN32 3 profile feet with calottes - height adjustable Remaining drain DN50

Features: Volume 3150 L Material No. V2A Max. operating overpressure 0.99 bar Total height 3000 mm Diameter 1300 mm Outer diameter 1400 mm Surface inside 2B=IIIC ground Surface outside 2B=IIIC ground Working temperature 20 C Cylinder length 2000 mm Description: Topsoil: Clapper bottom Threaded nozzle DN40 central Threaded nozzle DN40 side Check valve Cylinder: Manhole 440 x 340 oval Sample tap DN15 Ladder hooks Downward-swept CIP line DN40 with disc valve and pressure gauge Threaded welding nozzle DN25 with disc valve Cooling coil with inlet and outlet 3/4" Blind Cover Flange Neck DN125 Underbody: Clapper bottom/ curved back forward-drawn residual drain pipe with disc valve DN50 flush with the tank wall 3 profile feet with calottes - height adjustable

Wall-mounted refrigerator from the brand RITTAL model BLUE e+ SK3189940 No documentation In your state

COOLING TOWER, TRUWATER, TCS250C1B FRP square cooling tower , Dimensions of 2,500 mm x 2,500 mm x 4,250 weight of approximately 2,080 kg Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD

M.T.A. TAE 502 – Industrial Chiller / Process Water Chiller / Chiller For sale is a used industrial refrigeration unit M.T.A. TAE 502, built in 2003. The cooling unit was used as part of an industrial TRUMPF laser system and was used to cool the laser system. Technical data according to the nameplate: Manufacturer: M.T.A. SRL Model No.: TAE 502 Year of Make: 2003 Serial number: 2200 018 351 Voltage: 400 V Phases: 3 Frequency: 50 Hz Max. current consumption: 100 A Installed capacity: 59.0 kW Degree of protection: IP54 Max. operating pressure water circuit: 6.0 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant charge: 2 × 15.0 kg Max. refrigerant pressure: 22.6 bar LP / 28.0 bar HP Permissible ambient temperature: 5–40 °C Weight: approx. 1,430 kg The device is currently in storage and is not connected. An up-to-date functional test or demonstra ...

- Pumping system not included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-36

Description Item # 9400 - GUM/CHEWY CANDY EXTRUDER & COOLING TUNNEL Manufactured by WLS Manufactured circa. 1990s Extruder is a Model KM3 Single Nozzle Extruder for one colour rope 3 x Extrusion Screws WLS Snaking Device for round ropes between Extruder & Cooler Model KM L Through to a WLS Cooling Tunnel Model 4 KT60/5 600mm wide belt, 4m total length

Micro Cooling Bath BOEKEL 260010 Micro Cooler; ; New equipment in its original packaging; ; Model: 260010-2 Microcooler II; Temperature range: ambient to 18°C below ambient temperature, usually 4°C; Bowl accommodates a stand that holds up to 21 x; 1.5 mL microcentrifuge tubes; Peltier cooling system, which does not use CFC compressors or refrigerants; The cooling tank is leak-proof and can work as a small chilled bath; Easy-to-read LCD display; Push-to-set microprocessor controller; Compact design to save benchtop space; ; Internal reference: FA-2235; Auction-ID: A1-50994-1133

Used Haake Water Cooler – Circulation Cooler – Cooling Unit Cooling temperature: 15 – 30 Degrees Pressure: 14.5 – 86 Psig 14.5 – 6.0 Bar Voltage: 380 Volt, 50/60 Hz. Auction-ID: A1-50936-256

Equipped with cooling motor; heat recovery ; Please note, disassemble yourself on location! Auction-ID: A1-47395-1032

Installation made up of 1x GEA cooling unit (175x175x280cm); 3kW; 1x pump unit built in container (245x220x235cm) with 2x Sterling ZLND 040200 (190) AB pump; 11kW; 1x steel frame with piping (590x320cm). Without a concrete basin. Auction-ID: A1-50864-23

Incl. BKW - DL180V-1KKP - radiator, electronic components missing, dimensions (LxWxH) approx: 1640x900x1370 mm Auction-ID: A7-51326-39

7200 liters. Cooling motor included. In working order. Replaced the mixer motor a year and a half ago. Charging options available on site. Auction-ID: A3-46111-21525

Consisting of 1x 2015 Gamko MG2/150LG cooling approx 60x60x91cm 1x 2006 Gamko MXC cooling approx 120x60x91cm 1x 2008 Gamko MXC cooling approx 120x60x91cm You are responsible for disassembling this lot. There are no aids available. Auction-ID: A1-47451-269

offered is a water cooling system/ice water system, Fabr. DK, built in 1997, with DK chiller, approx. 750 l., with pump capacity 400 l/h, 1 cold and 1 hot water tank Technical data: Manufacturer: DK Kälteanlagen GmbH Volume: approx. 750 litres Capacity: 400l/h Year of Make: 1997 The plant is currently located at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take them back. The offers are subject to change, subject to error and subject to a possible intermediate sale. Our terms and conditions also apply t ...

Cooling line with three layers. Dimensions per layer: 7000x1360mm. Total length: approx. 21 meters. Auction-ID: A1-42990-212

ETSCHEID Industrial Cooling System / Chiller Type IK-V 7 W For sale is a used industrial chiller from ETSCHEID Anlagen GmbH. The system is ideal for cooling process water in industrial plants, machine tools, mass finishing systems, electroplating systems or other technical applications. Technical data Manufacturer: ETSCHEID Anlagen GmbH Type: IK-V 7 W Year of Make: 1996 Voltage: 3 × 400 V / 50 Hz Power consumption: 4.6 kW Refrigerant: R22 Refrigerant charge: 4.0 kg Max. operating pressure: 25 bar Weight: approx. 205 kg Facilities Digital temperature controller Robust industrial housing Control panel with main switch and start/stop function Designed for continuous industrial operation Condition The system comes from an industrial company and was used until dismantling. It is sold in used condition. A viewing is possible by appointment. Functionality untested. Auction-ID: A1-51577-2

Equipped with 14.25 layers, band width: 64cm. ; Equipped with GEA refrigeration installation with 3x Bitzer refrigeration compressors type: HSN 7461-70, 2 of which were overhauled in 2022. ; Equipped with GEA table condenser, belt washing installation and stainless steel control panel. ; Documentation is available. ; The spiral freezer has already been professionally dismantled with the option of reconstruction. Auction-ID: A1-42990-211

Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /

Note: The pictures serve to illustrate the material. - The workbench frames are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Borehole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,250 mm Particleboard depth: approx. 700 mm Surface: coat ...

Clamping Table, Sinusoidal Table, Swivel Clamping TableTable Length: 1130 mmTable Width: 300 mmTable Height: 112 mmFolding Angle: 2Folding Angle: max. 7- Folding Angle 2 via Threaded Spindle Folding Bracket max. 7 manually raised to the stopOverall Dimensions L x W x H: 1450 x 300 x 112 mmWeight: 275 kgGood ConditionClamping Plate, Ideal for Making Wedge Strips; used

Industrial trolley 262011001850 containing 6 medium tables JUT 90, 2 TAO coffee tables (1 white, 1 grey), 8 LOW LITA coffee tables (1 red, 3 black, 3 white, 1 grey) The industrial trolley is included. Photos may not reflect the quantities offered. Only the above description is contractual. Auction-ID: A1-50934-1127

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : roundtable / turntable diameter : 800mm / 1000mm/1200mm/1400mm/2000mm electrical : 230 VAC / on request 400V/3ph - Legs adjustable - Stainless steel construction - Speed control with frequency converter - CE confirmation - Manual and electr. draw - driven with geared motor - edge high 30mm The base frame has a support for the lift truck transport I offer this machine in NEW condition Round table in Stainless steel Ø mm Round table 800 Round table 1000 Round table 1200 Round table 1400 Round table 2000 Example fotos, with additional parts

Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm -Weight: 43 kg

clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg

steel base; equipped with a sub-mounted rotary motor; Auction-ID: A1-50476-18

Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking pins, used Finish: sendzimir g ...

Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking pins, used Finish: sendzimi ...

Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...

Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x Workbench stand, used Material colour: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm Clear width: 2,300 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: - The images are used to illustrate the material. - The material color may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3-5 working days. You are also welcome to purcha ...

Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are used to illustrate the material. - The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. The scope of delivery includes: 02x Workbench stand, used Material colour: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench crossbar, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x Screw M10x35 08x Nut Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only a ...

Work table packing table workbench adjustable height with wooden top and drawer container RA1800 Work table made of metal, painted white, used wooden worktop (traces of wear) height adjustment manually by crank Dimensions: width: 2000mm depth: 640mm height: 840 - 1020mm (adjustable) Drawer container with 4 drawers of different heights Container in 2 different colors (turquoise and blue) Arrangement of containers partly on the left, partly on the right Container dimensions: 400 x 650 x 600 mm (WxHxD) Heights drawers: 1x 50mm, 2x 150mm, 1x 300mm More than 50 tables available! All prices net, plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hear ...

Turning table, 180 rest table, rotary table with aluminium topPositioning table, rotary table, round dividing table 180Assembly table, swivel tableTurntable: 1080 mmOverall height to top edge turntable: 630 mm- Turntable made of 25.5 mm thick aluminium plate with various holes- very stable turntable, can be rotated by hand- 2 pieces index locking positions 180, manually via foot lever for de-latching- stop damper under the turntable for the locking positions- very stable steel substructure- flange plate steel substructure L x W x H = 600 x 600 x 20 mmSpace requirement

Hydr. Scissor lift table WEIDMANN type E5/13-1Fabr. No. 30403339 Year of construction 1982 / 2007Load capacity 500 kgPlatform size 2000 x 1200 mmStroke max. 1280 mmOverall height - table bottom 290 mmOverall height - table top max. 1570 mmTable height with safety support 1430 mmLifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 barEngine power 1.5 kWNex connection 400 volts, 50 Hz.- Rotary switch switch on the hydraulic power unit for up and down lowering speed

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SOFabr. No: 124984 year of construction 2017Load capacity 300 kgPlatform size 1250 x 800 mmUsable stroke max. 785 mmOverall height - table bottom 345 mmOverall height - table top 1130 mmEngine power 0.8 kWNet connection 400 volts, 50 Hz- Foot switch for up and down, with emergency stop and key switch for control One- Single scissors with a lifting cylinder- Circumferential safety contact strip with limit switches under the upper frame- Adjustable limit switch for the upper stroke restriction-

Rotary indexing table, positioning table, TC 700 T, Weiss, mint condition Special price The current market price of a comparable new rotary indexing table is approximately €13,600 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! A new rotary indexing table from a production company's spare parts warehouse. The part has never been used and is in mint conditin. Rotary indexing table, positioning table, TC 700 T, Weiss, as good as new, 1000 x 820 x 380 mm, 660 kg, Table D700 mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect  ...

Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: shelf with roller conveyor, mobile, height-adjustable -Plate: 2000 x 1000mm, thickness 3mm -Height: 980 to 1160 mm -Cut-out: 250 x 250 mm -Steel frame: solid with castors -Total dimensions: 2000/1000/H980 mm -Weight: 90 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, dividing table, vertical dividing table -Manufacturer: Peiseler, clamping table part table type GT 320x320 -Table surface: 320 x 320 mm -T grooves: groove width 14 mm, groove spacing 100 mm -Spindle bore: Ø 30 mm -Dimension: 475/410/H125 mm -Weight: 85 kg