cooling drum used for sale

Description: including the control cabinet to the right Performance data forces: Press cylinder max. closing force: 8,000 kN, free break-open force on the upper press table: 110 kN, Speeds: Closing speed: 10-500 mm/s, pressing speed: 1-38 mm/s, tearing speed: 0.5-10 mm/s, opening speed: 10-300 mm/s, time for press pressure build-up: 1 s Press cylinder dimensions: 1 piece D 600 mm, drive cylinder: 2 pieces 190/90 mm, hydraulics: operating pressure of hydraulics 315 bar, main pump flow rate: 152.4 l/min, oil tank capacity approx. 1,700 l, operating fluid: HLP-D32, electrical supply: 380 V, 50 Hz Top plate dimensions: 1,500 x 1,200 mm, opening width: maximum distance between plates 1,500 mm, overall height above floor: approx. 7,500 mm, travel: closing stroke 1,190 mm, total weight: 55 t, press frame approx. 20 t, press ram approx. 10 t, press cylinder approx. 2.2 t, press plunger approx.  ...

Description: Serial number 0014994 max. 1740 W Connection: 400 V Approx. Onsite Dimension. (l x w x h): 400 x 260 x 1,265 mm, weight approx.: 60 kg

Sabroe reciprocating cooling installation, consisting of Sabroe cooling compressor, type: SMC 11, number: 123437, year of construction: 2003, 1500 rpm, 1131 m³/h, Alfa-Laval plate heat exchanger, type: M10-BWREF, year of construction: 2003, and York refrigerant tank, dimensions: 4400 mm x 2000 mm x 2430 mm. Technical condition unknown.

Hoegger AG double lane cooling tunnel for EURO pallets, machine number: 3319, year of construction: 1999, consisting of: 2-lane cooling tunnel with 5 cooling sections of 3950 mm for (2x) 24 EURO pallets, in- and outfeed roller station for pallets, Siemens Simatec controls and switch cabinet, total dimensions cooling tunnel: 24000 mm x 5300 mm x 4100 mm, dimensions switch cabinet: 4400 mm x 400 mm x 2230 mm.

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of drum ...

Hiwell batter and breading line

Used Alfa Laval vacuum drum filter

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Max. loading: 15 kg Volume: 12 l Basket diameter: 420 mm Basket speed: 1600 rpm Dimension of travelling rack: Diameter: 320 mm Height: 180 mm Motor output: 0.75 HP Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 65 kg Overall dimensions machine: Length: 600 mm Width: 600 mm Height: 900 mm

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1200 mm

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Max. loading: 15 kg Volume: 12 l Basket diameter: 420 mm Basket speed: 1600 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 65 kg Overall dimensions machine: Length: 600 mm Width: 600 mm Height: 500 mm

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Max. loading: 20 kg Volume: 40 l Basket diameter: 300 (270) mm Basket height: 150 mm Basket speed: 1415 rpm Dimension of travelling rack: Diameter: 300 mm Height: 140 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 91 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1200 mm Various accessories: Top

Special offer: Very Special Price for Quick Sale! 6 col W&H Olimpia central drum flexopress reel diam on unwinder and rewinder 1200 mm width 1100 mm if need we will check if more is possible repeat: 300-910 mm gas drying ceramic anilox: 4x200 l/cm, 2x120 l/cm, 2x80 l/cm printing sleeves: For polymers 2.84; For polymers 1.14; 1. 310 - pcs.70 1. 310 - pcs.6 2. 320 - pcs.60 2. 320 - pcs.3 3. 330-piece 9 3. 330-piece 10 4. 340 - pcs.12 4. 340 - pcs.5 5. 350 - pcs.5 5. 380 -pcs.6 6. 360 - pcs.3 7. 370-pc.14 8. 380 - item 5 9. 390 - pcs.6 10. 410 - item 5 11. 420-piece 6 12. 430-piece 6 13. 440-piece 16 14. 460-piece 26 15. 480-piece 6 16. 490 - pcs.4 17. 510-piece 6 18 520-pc.5 19. 540-piece 6 20. 550 - pcs.50 21. 560 - pcs.4 22. 570-piece 6 23. 580-piece 5 Fixed rollers instead of adapters; 1. fi 89.243 pcs.6 fi 105.159 pcs.6 3. fi 124.257p.6 4. fi 140 ...

- PIP Drum Bearing Replacement - HP Part Number CT245-25472 - for HP Indigo Series 2 Machines

6 Drum Deburring Machine Fabr. HARTMANNYear 1984Number of drums: 6Inside size of the drums: 110 x 110 x 230 mmExternal dimensions: 950 x 1000 x 1600 mmWith- Separate control cabinet- Jogging mode- Timer- Remove and load the drums outside- Soundproof cabinused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sievmaster Flavouring drum Stainless, flavouring drum with sievmaster vibratory sieve, overall length 2000mm, mobile, 3Ph

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Skerman coating pan 150Kg coating pan, stainless pan, 3Ph

The following items can be purchased in the package or subpackage: Pos. 01) -> 9 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 224 mm or 240 mm with 8 mm rubber coating Shaft diameter: 70 mm Axle length: 1,250 mm Incl. 6 SKF pillow block bearings Pos. 02) -> 1 piece conveyor belt drums Surface: Rubberized Drum length: 950 mm Drum diameter: 260 mm including rubber coating Shaft diameter: 50 mm Axle length: 1,230 mm Pos. 03) -> 2 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 456 mm or 480 mm with 12 mm rubber coating Shaft diameter: 60 mm Axle length: 1,250 mm Item 04) -> 7 pieces of conveyor belt drums Surface: Blank Drum length: 950 mm Drum diameter: currently 216 mm or 240 mm with 12 mm rubber coating Shaft diameter: 50 mm Axle length: 1,150 mm Pos. 05) -> 2 pieces ...

• Three drum printer for two side offset printing of film/sugar-coated tablets, oval-shaped products, not suitable for printing on capsules. • Output max. 250,000/h tablets • With vibratory feeder for drum connection and sorter (twin removal, capped tablets, tablet pieces) • PLC Allen Bradley PAC with touchscreen, user login and password function for 21CFR11 compliance (Effective 2012) • With change parts for tablets dia 8,2 mm • FAT documentation • Without vacuum pumps (2 needed) • Several spare parts • Electr. connection 230V/50Hz

Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentati ...

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

General SKU300P643 LocationBarneveld MakeManufacturing plate is missing Main Features MaterialStainless steel Motor3.3 KW Specified Features - Tumbler mixer Drum mixercheck Diameter600mm Length/Depth1700mm Cylindrical length1700mm Inlet150x120mm Outletdia. 230mm With motor3,3 kW MaterialStainless steel Information Floorspace2,9x1,1 M Total height2,1 M Weight1500 KG Extra Specificationson wheels on lifting table Tumbler mixers-Mixers > Tumbler mixersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU051G200 LocationBarneveld MakeWerkhuizen Schepens N.V. Dendermonde TypeMixing drum No.70-776-397 Year of construction1998 Main Features MaterialStainless steel Motor11 KW Inlet diameter1200 mm Specified Features - Coating pan MaterialStainless steel 1.4306 (304L) Coating installationContinuous drum coater (1x) Pan diameter1200mm Cylindrical width6000mm, Adjustable inclination In-/OutletInlet 340x340mm, Outlet 400x600mm Motor11,0 KW, 380-415/660-720 Volt With spraying arm(nozzles are missing) Information Mounted on framecheck With switchgearcheck Floorspace9,0x2,6 M Total height2,1 M Weight8500 KG Extra SpecificationsMixing drum non perforatedCoating pansSchepensCoating pans > Coating pansBrand > Schepens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

General SKU354U1398 LocationBarneveld MakeOertli + CIE Year of constructionunknown( missing type plate) Main Features MaterialMild steel Specified Features - Tumbler mixer Barrel mixercheck With motorcheck With variable speed drivecheck Strober R17-1067-037-4 Speed mixer39-270rpm MaterialMild steel Information Mounted on mild steel framecheck Floorspace1,3x 1,2 m Total height1,2 m Weight180 kg Extra Specifications2x mixer wheel diameter: 1070mm mixer is suitable for 200 Ltr. barrels Tumbler mixersOertliMixers > Tumbler mixersBrand > Oertli What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Separating drum/ model ATS Year of construction 2008 Dimensions: LxWxH = 1.40 x 0.68 x 1.35m

Very beautiful JOPER coffee roaster with roasting profiler Year of manufacture: 2013 Condition: Very good (Was used only for micro lots) Hand crafted in portugal Usefull capacity per batch: 5kg Minimum batch size: 2.5kg Front and back lid made of cast iron Roasting and cooling at the same time 4 motors for the drum, the cooling tray arm, the cooling fan and the drum airflow Double wall drum Very well insulated roaster for increased quietness and energy efficiency Profile roasting system controlled by PLC, touch screen or computer. You can save roasting profiles and reproduce them later automatically. 2 thermocouples for bean and air temperature Artisan & Cropster connection Chaff collector included Adjustable Low Nox atmospheric LPG gas burner Power: 220V/50Hz Dimensions:2075 x 1160 x 2090H Weight: 450Kg Possibility to buy a destoner separately for 2000 ...

Wolff Apparatebau KG blanching and cooling line consisting of: Van Wees mobile elevating belt: s/s frame, plastic belt with dividers, belt width: 175 mm, distance between dividers: 165 mm, divider height: 50 mm, elevating height: 2930 mm, total dimensions: 3300 mm x 1100 mm x 3000 mm, Wolff Apparatebau KG blanching machine, type: B950/3000, machine number: 93-962, year of construction: 1993, 380 V, 50 Hz, 6.5 kW, dimensions: 4650 mm x 1550 mm x 3050 mm Wolff Apparatebau KG cooling drum, type: TRK950/3000, machine number: 93-963, year of construction: 1993, 380 V, 50 Hz, 10 kW, dimensions: 4650 mm x 1500 mm x 2400 mm s/s filter tub with circulation pump, inside dimensions: 1000 mm x 1000 mm x 950 mm, dimensions filter tub: 1400 mm x 1000 mm x 1130 mm, s/s platform, dimensions: 4100 mm x 1800 mm x 1980 mm, 3000 mm x 1100 mm x 1980 mm, 2900 mm x 1800 mm x 1980 mm, s/s switch ca ...

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

new unit, vertical designed roller sizes : D = 355 x 900 mm width with post-cooling rollers with edge-trim device with puller, comeplete unit moveable by motor

vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis

1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

with accessories, brake drum lathe with different Attachments for trucks Y.O.M. 1982

Sale of blasting system, blasting machine, trough belt system, drum blasting system, suspension beam system, crawler belt blasting system, roller-skating system, jet cabin, jet house, suction system, filter system, cartridge filter, profile beam systems of any kind

Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

Temperature Controllers Equipped with a Self-optimizing microprocess controller (+/-1 C) for temperatures up to 140 C. Powerful pumps (pressure up to 6 bar) guarantee a high flow of process water and thus a short preheating time and because of it's direct cooling design, a high cooling capacity. Year 2006

Blow head for LD-PE films with 80 nozzle insert and cooling ring available

Cat. No. 11-3015 in very good condition Two-phase decanters, also known as sewage decanters, are used for the continuous separation of solids from liquids with a high solid content. Due to the high speed of the drum, the solid particles settle on the drum wall and are continuously transported by the built-in conveyor screw to the solid discharge. The almost solid-free, clarified liquid leaves the separation space via openings at the opposite end of the drum. Built: 1973, Max speed 5000 rpm Power: approx.3000 Ltr/h Specific weight of the solid in the medium slingshot max. 2.3 kg HxWxD: 95 x 220 x 130 cm Weight: 745 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scop ...

Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping

small die-head with 60, 80 or 100 mm die-insert, with cooling ring

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

Filtration / cooling unit Furbished with 2 pcs of water coolers and 2 filterhousings PALL 8304 X= Lengths All kind of filterelements available in differnt micron ratings. Ideal to solve both filtration and cooling on various installations using Hydraulic Oil

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...