cooling drum used for sale

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 16 cooling units are available. All 16 cooling units fit into a 40Hc container for transport.

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -

Watercooled chiller EF COOLING EVO 90 WKL770FC 88 kW Cooling capacity: 88 kW / 25.02 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Freecooling (Dry cooler is additionally required) Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Hydraulic module: 2 pcs. Grundfoss CM 10-5 + 1 pcs. Grundfoss CR20-2 + 1 pcs. Grundfoss CM15-1, expansion vessel, buffer tank 500 l. Dimensions: 2x1.3x2 m. Weight: 1700 kg. Working hours: 10432/10428/1333/1532 h. Condition: Good

General SKU401S1130 LocationBarneveld MakeEmerson network power TypeHPF12U302A3P10020 Mach.No.10940780001 Main Features Heating (medium)Gas Temp.18 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck With coolingcheck Temperature18-27°C. With temperature controllercheck With controlcheck Information Year of construction2012 With switchcheck With switchgearcheck( as is) CEcheck Floorspace0,9x0,75 m Total height2,05 m Weight300 kg Extra Specificationsthis machine is used to cool airTemperature control unitsLiebert HPFHeat exchangers > Temperature control unitsBrand > Liebert HPF What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKU428W1355 LocationBarneveld MakeGFKK TypeTKK Year of construction1998 Pressure Working pressure24 Bar Main Features Heating (medium)Ammonia Capacity22 KW Temp.160 °C Specified Features - Temperature control unit MaterialMild steel, Stainless steel Temperating machinecheck With coolingR507 / R23 Temperature-70°C/+160°C Tank capacity1,5 m3 With pumpcheck Information Mounted on framecheck With switchgearcheck Total height2,50 m CEcheck Floorspace6,0x2,5 m Extra SpecificationsWith 4x Bitzer cool compressors, type 6G-30.2 Y, volume 126,8 m3/h, 19/25 bar, : Alfa Laval plate heatexchanger, type TM10-BFM, 10 bar, volume 56,7 l., : Schmidt plate heatexchanger, type ST12-PE0085, volume 12 l., 25 bar, : 2x Textoris horizontal stainless steel tank, volume 1007 l., 1x Textoris horizontal vessel, volume 1500 l., pressure 2 bar, : 3-doors control/power cabinet ...

General SKU244X191 MakeKöllemann TypeDT KSF 2XDN300 5500 lg No.0603120/2081250/01 Mach.No.0603120/2081250/01 Year of construction2006 Pressure Working pressure jacket3 Bar Technical specs Max. temperature550 °C Main Features MaterialMild steel Motor1.1 KW Length5500 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialMild steel Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter2x 300 mm Length5500 mm Between inlet and outlet4950mm Shaft diameter140mm Pitch150mm InletDia. 200 and 350 mm Outlet400x150 mm With jacketcheck Max. temperature35°C Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed2,0 rpm Information LocationBarneveld Floorspace8,0x1,10 m Total height2,0 m Weight2800kg CEcheck Extra Specificationsthe screw is coolableHorizontal screw conveyorsKollemanConveying systems > Horizontal sc ...

Dorit Vacuum Cooling Tumbler in very good condition CVM 300

General SKU413X1260 MakeNema LocationBarneveld CEcheck TypeKRS 0500x6800 Kersae-220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor MaterialMild steel, Stainless steel 1.4404 (316L) Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm Inletø 300 mm Outletø 400 mm With jacketcheck (Jacket: 180 Ltr.: Shaft: 110 Ltr.: Max. temp. : 10 / 80 °C) Max. temperature10 / 150 °C Motor7,5 kW, 400/690 V, 1468 rpm Screw speed40 rpm Information No.K62.281-014 Year of construction2004 Floorspace8,50x0,66 m Total height1,00 m Weight4000 kg Extra Specifications Product volume: 830 L: shell volume: 180 L: shaft volume: 110 L. Shell design pressure: 6 bar: test pressure: 8.6 bar. Shaft design pressure: 6 bar: test pressure: 8.6 b ...

General SKU413X1258 MakeNema LocationBarneveld CEcheck TypeKRS 0500x6800 Kersae-220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor MaterialMild steel, Stainless steel 1.4404 (316L) Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm Inletø 300 mm Outletø 400 mm With jacketcheck (Jacket: 180 Ltr.: Shaft: 110 Ltr.) Max. temperatureJacket: 10 / 80 °C: Shaft: 10 / 80 °C Motor7,5 kW, 400/690 V, 1468 rpm Screw speed40 rpm Information No.K 62.281-021 Year of construction2004 Floorspace8,50x0,66 m Total height1,00 m Weight4000 kg Extra Specifications Product volume: 830 L: shell volume: 180 L: shaft volume: 110 L. Shell design pressure: 6 bar: test pressure: 8.6 bar. Shaft design pressure: 6 bar: test pressure: 8.6 ...

General SKU413X1259 MakeNema LocationBarneveld CEcheck TypeKRS 0500x6800 KERSAE - 220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor MaterialMild steel, Stainless steel 1.4404 (316L) Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm InletDN300 OutletDN400 With jacketcheck 180/110 l. Max. temperature10 / 150 °C, jacket: 10 / 80 °C Motor7,5 kW 400/690 V 1468 rpm Screw speed40 rpm Information No.K 62.281-031 Year of construction2004 Floorspace7,00x0,75 m Total height1,50 m Weight2200 kg Extra Specifications Product volume: 830 L: shell volume: 180 L: shaft volume: 110 L. Shell design pressure: 6 bar: test pressure: 8.6 bar. Shaft design pressure: 6 bar: test pressure: 8.6 bar. ± 29,380 l./h. (Ex) mantle Mo ...

General SKU413X1261 MakeNema LocationBarneveld CEcheck TypeKRS 0500x6800 Kersae-220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor MaterialMild steel, Stainless steel 1.4404 (316L) Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm Inletø 300 mm Outletø 400 mm With jacketcheck (Jacket: 180 Ltr.: Shaft: 110 Ltr.: Max. temp. : 10 / 80 °C) Max. temperature10 / 150 °C Motor7,5 kW, 400/690 V, 1468 rpm Screw speed40 rpm Information No.K. 62.281-022 Year of construction2004 Floorspace8,50x0,66 m Total height1,00 m Weight4000 kg Extra Specifications Product volume: 830 L: shell volume: 180 L: shaft volume: 110 L. Shell design pressure: 6 bar: test pressure: 8.6 bar. Shaft design pressure: 6 bar: test pressure: 8.6 ...

General SKU413X1250 LocationBarneveld CEcheck MakeCelsius TypeCWR-600 Pressure Working pressure5 Bar Working pressure jacket5 Bar Technical specs Max. temperature80 °C Main Features MaterialStainless steel Motor11 KW Specified Features - Continuous dryer Screw dryercheck (screw heat exchanger) Double shaftcheck Continuouscheck (with product change) Capacity900 kg/h Length6000 mm Product inlet400 x 400 mm Manhole300 x 400 mm Product outlet320 x 860 mm With jacketcheck 25 l. Shaft can be heatedcheck Max. temperature0 / 80 °C (Glycol) Motor11 kW, 400/690 V, 1500 rpm Screw speed5,8 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information No.600456A Year of construction2010 overhauled 2014 Mounted on framecheck With switchcheck Floorspace8,70 x 1,90 m Total height1,50 m Weight5200 kg Extra Specificationsdensity 1300 kg/m3, Internal volume ...

VENANZETTI COOLING TOWER, for extrusion lines, this system allows to cool the granule after extrusion with little space taken, READ CONSTRUCTORS DESCRIPTION :, Spiral elevators, The spiral elevator is the perfect solution for moving a product upwards while simultaneously treating it thermally in very small spaces., The conveyor surface is a rising helicoidal trough, or rather a spiral with a constant pitch. The width of the trough is determined by the difference between the helicoid’s external and internal diameter. The product moves upwards on the conveyor by means of an oscillating thrust movement with controlled frequency and amplitude, and the direction is inclined in order to throw the product upwards., The advantages of this solution are:, -, very small layout space;, - thermal treatments while the product is on the conveyor (heating, cooling, drying, curing, etc.);, - speed on t ...

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %

Nowicki Vakuum tumbler -Typ: MA-G-5400 -Kapazität: 5400 l -Max. Beladung: 2700 kg -Mit Kühlung -Antriebsleistung: 8,2 kW -Gewicht: 2900 kg -Abmessungen: 4150 x 1900 x 2350 mm -Stromversorgung: 3 x 400 V -Aus Edelstahl -Einsatz mit Band- oder mechanischer Beladung -Verfügbar: 2 Stück -Zustand: Gebraucht, sehr gut, generalüberholt, sofort einsatzbereit

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

General SKU305U627 LocationBarneveld CEcheck MakeStarick Fördertechnik GmbH Main Features Motor4 KW Length9520 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter219 mm Length9520 mm Between inlet and outlet7878 mm Shaft diameter133 mm Pitch185 mm InletDN200 OutletDN200 With jacketcheck (cooling) 6000mm long Max. temperature100°C With adjustable packing glandscheck Motor4kW, 400/690 Volt, 1452rpm Screw speed12/25 rpm Information TypeRFS-200/SoK Mach.No.1821.2694.01.05 Year of construction2005 Floorspace9.0x0,5 m Total height0,5 m Weight900 kg ATEX compatiblecheck Extra Specificationswith new motor and gearboxCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additive ...

The roller drum was used as a coater for spraying granules. The drum is designed in V2A and has a length of 2400 mm with an inner diameter of 890 mm. The base was sandblasted and repainted.

Cooling Unit Cooling Water Recirculating Cooler ARO Type VWK 31/1-SFabr. No. 0705384 year of construction 2007Cooling capacity 3500 wattsAmbient temperature max. 32CRefrigerant R407CCrefrigerant Capacity 0.98 kgOperating overpressure Refrigeration compressor max. 29.5 barWater tank capacity approx. 8 litresFlow volume Circulating pump 27 litres/min. (1620 litres/h)Water connections Quick-release coupling Rectus Type 26Mains connection 230 volts, 50 Hz, 2.2 kW- temperature setting via DANFOSS thermostat controller- built-in circulation pump (250

The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liqui ...

filling capacity: 750 kg max. workpiece height: 900 x 300 mm workpiece weight: total 550 kg max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1775 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. The EVO model is available for light to medium workpieces. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds t ...

Truck attachment Drum grab Suitable for 2 x 200 L steel corrugated/steel lid drums Description firm grip even on uneven floors Sturdy, welded steel construction Forklift attachment module with robust powder coating in blue (RAL 5010) Fast, easy installation on the forklift Automatic fixation when lifting the drum Automatic release of the clamp when setting down Safe pick-up of steel corrugated and clamping ring drums Height adjustable Specifications Surface: Hot-dip galvanized Application: Lifting/transporting steel drums Width outside [mm] 1050 Depth outside [mm] 1080 Exterior height [mm] 975 Fork pocket spacing [mm] 730 Fork Bags W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate Description 1 2006/42 DECLARATION of CONFORMITY Weight [kg] 110 More items - new and used - can be found in our shop! International shipping ...

Cooling unit water recooling unit DALEX type DRF 2Masch. No. 38913719 year of construction 1989Volume flow 0.35 m3/hCooling capacity 1950 wattsOperating pressure 2 to 3 barRefrigerant R 134a Device has been converted from R12 to R134aOperating overpressure 18 barPipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litresMains connection 380 volts, 50 HzSpace required L x W x H 900 x 800 x 1020 mmWeight 100 kgGood condition; used

A conveyor belt with a cooling tunnel is being sold. Metal chain links. Bj 2022 Width approx. 35cm Band length approx. 235cm Machine dimensions approx. L 265cm W 95cm Price is net VAT Machine can and should be tested on site, as warranty or guarantee is excluded. Loading facilities available Article location Nuremberg

Drum sieve used for SM518 new in stock! Used Drum Screen for SM518 new in stock! Punching: 10 mm rectangle; Material thickness: 6 mm perforation: 10 mm rectangle; Thickness: 6 mm Condition: used/ as good as new (screen drum was only used for one test) Condition: used / like new (drum was only for a short test in use) Available: immediately Available: immediately Location: 77966 Kappel-Grafenhausen (near Freiburg) location: 77966 Kappel-Grafenhausen/ Germany (Near Freiburg) We are happy to organize the transport for you! We can arrange transport for you! We also supply new or other used screen drums to all common screening machines (SM620, SM618, T4, T5, Mustang,). Manufactured in our factory in Germany from German, very high-quality, sharp-edged perforated sheet metal. We also provide new or used screening drums for all standard machines (SM620, SM618, T4, T5, ...

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

various accessories

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

4 drum pumps; pneumatically operated; suitable for 200L faessers; with base and distribution line.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.

Drum cleaner type EIRICH with double screen 1.5 m width

Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below

VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)

For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg

Drum motors for conveyor belt drives according to the list in photo The motors are in good condition, ready for operation Flat rate for all engines EUR 3800.00 Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

It is a new WP drum for Multimatic head machine type MUC-G 4-row for sale. - Weight range: 52gr. - 58gr. Price on request.

EKATO UNIMIX LM 4,5 laboratory vacuum and homogenizing mixer for the manufacture of cosmetic and pharmaceutical products such as emulsions, suspensions, creams, lotions and pastes, capacity from 1,0 to 4,0 litre, anchor stirrer with side and bottom scrapers (50-210 RPM), homogenizer/dissolver (8000-24000 RPM), jacketed for heating/cooling, usable for vacuum, maximum internal working pressure -1/+2 bar, maximum working pressure jacket 6 bar, maximum internal temperature 133 ºC, maximum temperature jacket 150 ºC, lid-lifting device, temperature control system, electrics 220V; 50/60 Hz, maximum power 3 kW.

Milling machine DECKEL MAHO DMG 125

It is a new WP chamber drum for Multimatic head machine type MUC 5-row for sale. - Weight range: 65gr. – 77gr. Price on request.

Draging drum for dragees

The Screen Drum ASCO SD MINI is a foldable, semi-mobile unit designed for efficient screening in recycling, construction, agriculture, and gardening. As the MINI version of the SD COMPACT, it delivers flexibility and performance for handling various materials, including moist and sticky ones. Thanks to its vibration motor and robust design, it ensures smooth material processing whether fed manually, by excavator, or with a conveyor belt. Screened material is evenly discharged along the drum’s length, and larger pieces exit through a rear chute. The SD MINI offers stepless drum speed, reversible drum rotation, quick drum changes, multiple drum configurations, specific perforation solutions, a round drum with a cleaning brush, and an adjustable screen angle. Its variable height adjustment makes transport and operation easy, providing a powerful, user-friendly solution for diverse scr ...

The ASCO SD Compact with Bunker and Drum Extension Compound is a semi-mobile screening drum designed for coarse materials like soil, gravel, wood chips, various waste types, and chip bundles. Built with a robust, foldable frame, it offers maximum flexibility for the recycling and material processing industries. Its modular design includes variable drum use and adjustable rotation speed for precise results. The system supports up to four fractions within a single drum segment thanks to different perforations, a cleaning brush, and a modular baffle for efficient screening. The optional bunker expansion boosts input capacity by up to 50%, while the adjustable screen inclination and variable support plate ensure easy adaptation to different sites. Quick bunker changes in just a few hours and the drum extension for larger screening areas make this machine one of the most versatile and fut ...