cooling compressor used for sale

NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control, Additional title: refrigerant ammonia, Brew water flow: 5 m³/h 2 bar, Ice water flow: 15 m³/h 2 bar, Refrigerant capacity: 85 kg Ammonia, Compressor capacity: 145 m³/h, Power: Q0: 2 x 119 kW, Operation / Control: Siemens S7, Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pum ...

Volume-dependent dual system, Additional title: Separator, condenser and control cabinet from 2010, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet

A Sandern vacuum calibration and cooling tank is offered. Max. pipe diameter: 125mm, tank length: 6000mm, number of chambers: 2. Dimensions X/Y/Z: 6500mm/1000mm/1500mm, weight: 1500kg. Inspection by appointment possible.

Cooling system Weidenreich BJ 2014

Features: Overall height 1411 mm Diameter 700 mm Weight 80 kg Description Operating pressure: +2.0 bar Pillow Plate/ Interior Permissible. Operating pressure: +3.0 bar/ +2.0 bar Test pressure: +5.1 bar/ +3.4 bar Permissible. Operating vacuum: -0.15 bar/ -0.15 bar Permissible Operating Temp: +80/-10°C/ +130/-10°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Topsoil: - Stable stacking crown - Manhole cover round 400 mm with 2 x handle - Weld-on nozzle DN 50 (blind cap DN 50 for an extra charge) - 1 x pressure relief valve - 1 x CO2 aeration valve - 6 x star head screws Cylinder Bottom: - With cooling jacket - Connections for cooling jacket on the back and side inlet and Outlet - With tasting tap DN 25 (on extra charge) -with dip shaft sleeve with tempe ...

Cat No.: 26-0064 Features Volume 1000 L Material No. V2A Exterior Surface IIID Surface inside IIID Total height 1845 mm Cylinder height 1250 mm Diameter 1130 mm Weight 184 kg Description Topsoil: Clapper bottom Threaded Socket DN50 Manhole CIP Connector Airlock connection DN50 Cylinder: Cooling jacket Insulation Level indicator Sample tap DN25 Dip Shaft Sleeve for Thermometer Underbody: Forward-drawn residual drain pipe with disc valve DN50 4 feet

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

TIG-TIG Welding Machine Oerlikon DTW 251 A The device is untested. A suitable hose package is missing. The Oerlikon TIG welding hose shown does not have the correct connections, an adapter is missing (TIG connection adapter for the old Oerlikon central connection) Manufacturer: Oerlikon Schweißtechnik GmbH, Eisenberg/Palatinate. Made in Germany. Technical data: Mains connection 380 volts. Welding range 5 - 250 amps. Welding performance: 250 A / 20 V at 60% ED. 200 A / 28 V at 100% ED. Water cooling. High-frequency ignition (HF). Pulse welding function to minimize warping. Adjustable lowering current (crater fill flow). Also suitable for welding with rod electrodes. Condition & Scope of Delivery: Attention: Oerlikon TIG adapter is missing. Oerlikon hose package (not suitable!), TIG welding torches, remote control, and ground cables. Without gas bottle.  ...

- Open-circuit cooling tower. - Main structure in reinforced plastic material with access platform and railings. - Includes centrifugal water recirculation pump. - Includes auxiliary vertical pump. - Includes electrical control and maneuvering panel. - Includes 2 MILTON ROY dosing pumps for chemical water treatment. - Includes visible pipes, valves, and fittings. - Metal support columns are NOT included. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-41

Features Volume 53800 L Material No. V2A Operating pressure 2 bar Working temperature 20 C Total height 10870 mm Diameter 3260 mm

OLAER CW 19 NBSQC ist ein Oelkühlgerät ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten: Abmessungen – Länge 700 mm, Breite 450 mm, Höhe 360 mm. Hauptspezifikationen: Anschluss 50 Hz 3x: 400 Volt; Leistung der Heizung 2 kW; Maschinengewicht ca. 48 kg. Ermöglicht enge Toleranzen; typische Anwendungen: Automobil, Werkzeugmaschinen, Hydraulik, Luftfahrt. Technische Daten ohne Gewähr

STUDER ist eine Kühleinrichtung, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Betriebsdaten wie Durchmesser oder Verfahrwege sind nicht angegeben. Technische Hauptdaten: Eigengewicht 500 kg; Abmessungen L 1400 mm x B 1000 mm x H 2300 mm. Keine speziellen Zusatzausrüstungen angegeben. Eignet sich zur Erzielung enger Toleranzen und findet Anwendung in Branchen wie Automotive, Luftfahrt, Medizintechnik, Uhrmacherei und Maschinenbau Technische Daten ohne Gewähr

Total height 135cm (with legs) Tank height 90cm Diameter 90cm Total length 277cm Tank length 195cm Capacity 1240l Inspection hatches 2pcs Top entrances 2pcs Bottom drain entrance 1pcs Agitator with motor, diameter 38cm Auction-ID: A7-49327-99

Features: Volume 2750 L Material No. V2A Max. operating overpressure 2 bar Total height 2850 mm Diameter 1540 mm Outer diameter 1550 mm Surface inside 2B=IIIC ground Surface outside glass bead blasted Description: Topsoil: Clapper bottom/ curved back Flange cover diameter 450 mm Connection overflow pipe DN40 outgoing laterally Threaded welding nozzle DN65 with disc valve Threaded Welding Nozzle DN65 2 x Threaded Weld-on Sockets DN25 Cylinder: Ladder hooks downward-drawn CIP cable DN40 4 x cooling coil 70 mm wide Temperature sensor Fischer Weld-on socket DN15 Underbody: Cone base with cooling jacket 35cm high Side threaded welding nozzle DN32 3 profile feet with calottes - height adjustable Remaining drain DN50

Features: Volume 3150 L Material No. V2A Max. operating overpressure 0.99 bar Total height 3000 mm Diameter 1300 mm Outer diameter 1400 mm Surface inside 2B=IIIC ground Surface outside 2B=IIIC ground Working temperature 20 C Cylinder length 2000 mm Description: Topsoil: Clapper bottom Threaded nozzle DN40 central Threaded nozzle DN40 side Check valve Cylinder: Manhole 440 x 340 oval Sample tap DN15 Ladder hooks Downward-swept CIP line DN40 with disc valve and pressure gauge Threaded welding nozzle DN25 with disc valve Cooling coil with inlet and outlet 3/4" Blind Cover Flange Neck DN125 Underbody: Clapper bottom/ curved back forward-drawn residual drain pipe with disc valve DN50 flush with the tank wall 3 profile feet with calottes - height adjustable

Auction-ID: A1-48980-369

Wall-mounted refrigerator from the brand RITTAL model BLUE e+ SK3189940 No documentation In your state

Attention! According to the information defective, suitable as a spare part, including pallet Auction-ID: A1-49606-57

Including pallet Auction-ID: A1-49606-56

The flex hose consists of 29 segments, cooling and lubricating device for turning and milling machines using atomization Auction-ID: A1-48552-151

Total height 135cm (with legs) Tank height 90cm Diameter 90cm Total length 277cm Tank length 195cm Capacity 1240l Inspection hatches 2pcs Top entrances 2pcs Bottom drain entrance 1pcs Agitator with motor, diameter 38cm Auction-ID: A7-49327-52

Under which trolleys, roll cage, plastic shelvings systems etc. Auction-ID: A1-49790-1507

COOLING TOWER, TRUWATER, TCS250C1B FRP square cooling tower , Dimensions of 2,500 mm x 2,500 mm x 4,250 weight of approximately 2,080 kg Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD

Under which trolleys, roll cage, plastic shelvings systems etc. Auction-ID: A1-49818-1507

Consisting of: 2x 2008 DynaCiat LG LGP 600V Chiller, Cabero GC/HND1-7EC/2XCE Condenser, 3x 2014 Gea Goedhart VCI-Z 81506 L Evaporator, 2x 2014 Gea Goedhart DVS 62504 L Evaporator double blowout, Grundfoss Pumps set 1, Grundfoss pumps set 2, Grundfoss pumps set 3, accompanying control panel with documentation. Auction-ID: A1-49552-36

Equipped with heat exchanger. Flow volume: 2500 m3/h. Auction-ID: A1-49552-43

Manufacturer: Rittal Series: TopTherm Type: SK 3387.540 Designation: Enclosure Cooling UnitYear of construction: 25.09.2019 Origin: Made in Italy Technical data: Nominal voltage: 400 V / 50 Hz / 3~ Nominal current: 3.9 A Starting current: 17.0 A Fuse: 6.3 – 10 A Refrigerant: R134a Filling quantity: 1,800 g Total cooling capacity (DIN EN 14511): L35 L35: approx. 3.8 kW Sensitive cooling capacity: approx. 3.47 kW EER: 2.38 Operating temperature: +10 °C to +55 °C Degree of protection: Internal circuit: IP54 External circuit: IP34 Weight: 77 kg Auction-ID: A7-49816-82

Set of 2 HITACHI air conditioners, model RPI-5.0FSN4E. The air conditioners are arranged on pallets and ready for loading. Auction-ID: A1-49935-18

FRIGEL MRS 51 industrial water chiller, new and never put into operation. Year: 2023 Power: 6.2 kW Power supply: 400 V three-phase – 50 Hz Amperage: 18 A Weight: 260 kg Protection rating: IP44 The machine is installed on a pallet and has never been put into operation. Auction-ID: A1-49938-14

- Industrial cooling system consisting of 2 evaporative cooling towers with associated hydraulic circuit. - Equipped with 2 metal frame mounted plate heat exchangers. - Includes 2 centrifugal circulation pumps for process fluid impulsion. - Includes general electrical panel and control system for management of both cooling towers. - Includes manifolds, interconnect pipes, valves, and visible hydraulic fittings associated with the system. - Includes the vertical impulsion and return pipes to the two cooling towers. - Includes the 2 evaporative cooling towers installed on the roof, visible in the photographs. - Operating conditions of this item without checking. Auction-ID: A7-48839-71

Climate chamber type TD-030, suitable for outdoor installation. The cabinet offers space for an inverter and 30 lithium-ion battery modules in a 19-inch format. Thanks to the built-in climate control, the cabinet can both cool and heat, so that the contents remain at the right temperature all year round, even in frost or full sun. The cabinet has been used and is in good condition. Suitable for anyone who wants to build their own battery system with 19-inch rack batteries, for example for storing solar power at a business premises, agricultural company or larger home. Due to the standard 19-inch size and the climate control, the cabinet can also be used as a server cabinet or network cabinet at a location without a conditioned technical room. Specifications: Type: TD-030 Version: climate chamber for outdoor installation Installation size: 19 inch Capacity: 30 positions for lithium-ion  ...

- Pumping system not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-36

Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.

Amonyak refrigeration plant,from a meat processing plant. The plant is made of 3stk. Compressor Sabroe, Compressor 1. SABROE Type: SMC104L-HP,276m3/h,1465rpm,R717,Y.O.M.1996. Electric motor SCHORCH Type: KN7225M-BB01F-Z,55kW. Compressor 2and3. SABROE Type: CMO28,190m3/h,1460rpm,R717,Y.M.1996. MOTOR SCHORCH Type: KN7200M-BB01F-Z,37kW. The plant is in a very good condition,see pictures. Several pictures and info on request.

Compressor Bitzer 6H-25.2Y-40P,Used for freezing or plus-cooling

Compressor make BITZER Type 4H-15.2Y, 73.7 m3/h conveying volume For more information call +43 0664/1838175 or by emailing info@frigocom.net

Make: Danfoss Type: SZ175S4RC Performer 3 pieces New Vacuum: - Pressure: 25bar - Temperature max: 63C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 31.9bar - Temperature max: 65C - Temperature min.: -35C - Volume: 2 litres

Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.

compressor compressor Copeland Stream, model

A complete unit is offered.

On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used