135,211 used machines on RESALE, but how to find them? Machine Search
Rofin RoHS WKH/W-13000-W-MC-SON-3-D Laser Cooling Laser cooling Rofin RoHS WKH/W-13000-W-MC-SON-3-D Rofin Controller LasCon WaC 2 Störk Tronic Thermostat Controller Buschjost Solenoid Valves 400 volts Unused stock items More items new and used - can be found in our shop! International shipping costs on request!
A continuous cooling tunnel MF-Hamburg is available. Cooling principle: radiation and convection cooling, working height: 920mm, belt width: 420mm, conveyor belt: PUM2 smooth belt, height adjustment: +/-15mm, infeed length: 2770mm, cooling length: 17000mm, overall length: 20250mm, overall width: 720mm, material: 1.4301. Documentation available. An on-site inspection is possible.
Thermotec PX06/H35CX Chiller 64.5 kW Manufacturer: Thermotec NV Model: PX-06 Series: 06C... B01 Year: 2006 Refrigerant: R407C Tank volume: 950 liters Current 3x380/415V 50 Hz Power: 64.5 kW 118 Amp. IP54 More refrigeration systems new and used - you can find them in our shop! International shipping costs on request!
Counter-current pellet cooler manufactured by MÜNCH-Edelstahl GmbH, model SDCC5, unused. The equipment works by means of a counter-current air circulation system, allowing the temperature and surface humidity of the product to be reduced before storage or packaging. It is equipped with square-section cooling chamber, integral discharge system, upper rotary airlock driven by geared motor, hydraulic unit for driving the discharge system, and level and temperature sensors for process control. Its nominal capacity is up to 5 tons/hour for pellets of 6 mm in diameter, depending on the product and operating conditions. Technical characteristics SDCC5 Model Year of manufacture 2014 Unused
This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994
Industrial coolers and cooling interface from Riedel Fully functional. Trouble-free operation with us until the end of May 2026 Cooler and interface are disconnected and ready for immediate shipment. We used them to cool a Trumpf Co2 laser. Operating instructions available (see pictures) Last inspection by specialist company 2026 Refrigerant R134a. Universal Cooling Interface Riedel The cooling interface is a ready-to-connect functional unit and is used to recool water in conjunction with Trumpf cooling units. It contains all the fittings and control equipment required for operation. Further information can be seen in the pictures. If you have any questions, just get in touch. Price = net A VAT invoice will be issued upon purchase. Pick-up by buyers. We can load.
Manufacturer: York Type: YCWZ44CBO-50PA Year of construction: 1997 Machine weight: approx. 1700 kg Dimensions of machine approx.: Length: 3050 mm Width: 1100 mm Height: 1620 mm with control cabinet from the conversion of buildings
Rear DVAS 180 Refrigeration System 180 kW Professional, industrial refrigeration system from the premium manufacturer HECK Kältetechnik GmbH. The system is in a very well-maintained condition appropriate to its age and was reliably in use until the end. Thanks to the modern R513A refrigerant, the system is future-proof and meets current environmental and efficiency standards. Technical data (according to nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of Make: 2019 Refrigerant: R513A (Max. charge weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (number 0036) Performance data & area of application Cooling capacity: 180 kW – Ideal for efficient cooling of large halls or commercial spaces. Heatin ...
Huber & Ranner Air Conditioning System (AHU) For sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The system was used as a recirculation unit for a paint booth and is in excellent, clean and professionally maintained overall condition. The system controls the entire air climate (filtering, cooling, humidifying, conveying) and is ideal for production halls, paint shops, wood or metal processing as well as large-scale industrial projects. Technical data of the entire system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / size: X-CASE 15 (Plant designation: SPK ULA) Number of mandate: 19 0090 Z / P.010 Volume flow / air capacity: 31,000 m³/h The module components in detail: Powerful fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: ...
Cooling tower with 950 kW cooling capacity, used as extruder cooling. Complete plant with water treatment, plate heat exchanger, switchgear, pumps. Cooling tower for outdoor installation in stainless steel with 2 fans of 15 kW each. Very energy-saving cooling system in mint condition. Due to relocation.
New repair kit for a Volvo Penta TMD 122A cooling water pump List price of the package 650,-€ consisting of the following parts: 1 Piece Repair Kit 8767628 1 piece gasket 862596 1 piece gasket 422171 1 piece gasket 423351 3 pcs hexagon screw 955542 10 pcs hexagon screw 955536 1 piece plug 968146 2 pieces of V-belts 966959
Laser Cooling Unit Manufacturer: Riedel Type: RW 27/0SR Year of construction:2017 Refrigerant: R134a
MAN part number 81.06140-0243. Auction-ID: A1-41279-68
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard
Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 500 liters Machine dimensions in cm: Length: 178 Width: 102 Height: 155 Electric power: 3 kW
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1500 liters Machine dimensions in cm: Length: 240 Width: 144 Height: 210 Electric power: 5 kW
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW
Control cabinet cooling unit, control cabinet cooling unit TRAUB 380 V 3 AC spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 490 x 320 x 1320 mm
Refrigeration unit THERMOTEK Type: P705-14974-1-U Cooling capacity: 400W max 18.5 bar Pump: 5 l/min 3 bar 0.5 kW 230 V New ! Dimensions: 580 x 420 x 240 mm
Control cabinet cooling unit, control cabinet cooling unit PFANNENBERG DTS 73.. (1500 watts) 220 V Dimensions: 390 x 220 x 1350 mm
Cooling Module for Welding Machines, Convection Cooling Module for Water-Cooled Welding Machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm
Twist drill bits with internal cooling RWR SBV 11,000 65x70x12x118 ( SBV11,65x70x12x118 ) with internal cooling IA52187 Ø 11.65 mm shank Ø 12 mm spiral length 70 mm total length 118 mm New !' Dimensions: 125 x 17 x 17 mm
Ladle cooling fan, centrifugal fan, radial fan VAUPEL WAVASO 18.025 - H Air capacity: 4,500 m3/h Motor : 7.5 kW 2900 rpm 400 V drivable ! used, tested !' Dimensions: 1500 x 1500 x 1500 mm
Cooling Package, Radiator with Blower, Cooling Fan, Oil Cooler SETRAB br /K38 - 0708 S ( K38-0708S ) CP8 - 640M18 640M198M14 Radiator : 240 x 45 x 300 mm Fan: Ø 220 mm 0,0,0 11 KW 2650 rpm 230 / 400 V used, tested ! Dimensions: 330 x 270 x 310 mm
Cooling fan for engine brake, external fan LENZE A 29130 motor: 0.048 kW 220 / 380 V Inner diameter: Ø 154 mm New ! Dimensions: 156 x 205 x 156 mm
Control cabinet cooling unit, control cabinet cooling unit RITTAL TOP THERM PLUS SK 3303500 suitable for PC cabinet EL407 ! 20°C to 55°C 230 V used ! Dimensions: 280 x 230 x 550 mm
Control cabinet cooling unit, control cabinet cooling unit MCLEAN MIDWEST SLIMBOY 28-0626-G005 Useful cooling capacity: 1582 / 1758 W 230 V 60 Hz used, tested ! Dimensions: 990 x 250 x 730 mm
Step drill with internal cooling GÜHRING diameter: Ø 25.0 x 14.5 x 17.0 mm solid carbide DK480UF shank: Ø 25 mm with internal cooling ! New ! Dimensions: 120 x 25 x 25 mm
Step drill with internal cooling GESAU diameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 ) shank: Ø 25 mm with internal cooling ! New ! Dimensions: 110 x 25 x 25 mm
Step drill bit with internal cooling GÜHRING diameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm ) solid carbide DK480UF shank: Ø 25 mm with internal cooling ! ground !, Dimensions: 120 x 25 x 25 mm
Control cabinet Cooling unit for the temperature control of electrical control cabinets and enclosures. The device is designed as an enclosure cooling unit of the TopTherm series and operates with a total cooling capacity of 0.36 kW at 50 Hz. It is suitable for use in automation systems, control cabinets and industrial electrical distribution boards. The device is used and shows normal signs of use as well as dirt on the housing. Sold without other accessories. Scope of delivery: Control cabinet cooling units Without other accessories Series: TopTherm Type: SK 3302100 Year of construction: 2018 Device type: Control cabinet cooling unit Design: Enclosure Cooling Unit Connection: 230 V / 50 Hz / 1~; 230 V / 60 Hz / 1~ Rated current: 1.6 A at 50 Hz; 1.7 A at 60 Hz Starting current: 3.0 A at 50 Hz; 3.4 A at 60 Hz Fuse protection: 10 A Rated power: 0.27 kW at 50 Hz; 0.28 kW at 60 ...
Cooling aggregat ZCH -3 - NEW External dimensions: L 1300 x W 750 x H 1250 mm Weight: 190 kg Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała Identyfikator VAT: PL547-17-47-669 tel. 0048/33 812 58 60 Faksu. 0048/33 812 58 36
Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,
Current: 400V, 3~+N, 50Hz Power consumption: 4.8 kW Rated current: 10 A, max. 12 A Refrigerant: R410A, 2 kg Auction-ID: A1-49964-21
MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.
maximum number of results exceeded
please refine your search
100 € 
