cooler fan used for sale

Fan / Cooler / Dryer, Glue Dryer GATH 80944-120304 Fan 0,0,000 25 kW TECUMSEH refrigeration unit 17.5 m3/h duct connection: 250 x 500 mm Dimensions: 2000 x 800 x 1480 mm

Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.

erge-spirale table cooler 185 DM3 Air cooler from 1989, 1 available 6 fans, 185 l, 15 bar Manufacturer: erge-spirale Model: 185 DM3 Type: Table Cooler Serial number: 471-60487 Fans: 6 Volume [l]: 185 permissible. Overpressure [bar]: 15 Year of Make: 1989 Weight [kg]: 2.500 Dimensions LxWxH [m]: 5.20 x 2.45 x 2.00

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0Fabr. No. 318844/626052/1 Year of construction 2008Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³Air inlet 500 mmAir outlet 450 x 450 mmEngine speed 1435 rpm. Motor power 4 kWNet connection 400 Volt 50 Hz- Fan wheel with 8 fan blades- Directly flanged drive motor- Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- Galvanized

Type: Centrifugal fan for dust extraction systems Electrical supply: 380V Motor power: 2 †7.5 kW Transmission: Belt and pulley drive; electrical cabinet not included Auction-ID: A7-44526-17

Water cooler tower,1 MW- 1,040 kW, 2pc, make BALTIMORE, each with 2 fan units, see photo.

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

used radiators for water cooled industrial engines - for example ISEKI Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Yanmar etc. Diesel engines 1-6 cyl., various products: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, dsey Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors. - JODAU local, environmental & green care technology- second hand equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Cover for charge air cooler MWM 620 RECON Part number: 1214 1951 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1203-1208 / 1213 6626 / 1230 6642 / 1213 6625 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Various varieties in stock

RECON Part number: 1203-1212 / 1213 6618 / 1230 6640 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

New Part number: 0400 0685 6/8 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Ready to ship

RECON Part number: 0405 0969 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.

RECON part number: 1212-8789 Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.

RECON Part number: 1230 in 2370 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Original MTU Charge air radiator cooler for MTU diesel engine type 16V2000G26F (3B)

Original Charge air radiator cooler for MTU diesel engine type 16V2000G25 (3B)

Transmission oil cooler (recon) various

- Oil cool oil cooler 12302852 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new techno ...

Specifications General Drain spout G 3⁄4 inches Fin spacing 7.0 mm Type GDF030.1C/17-AN150 Electrical data Power consumption Fan 0.28 A Supply voltage Fan 230-1-50 V/Ph/Hz Flats Surface 8.8 m² Weight Net weight 16.3 kg Performance data Rated power 1.8 kW Temperature difference = 8 °K , evaporation temperature = -8 °C 1.5 kW Temperature difference=7 °K, evaporation temperature=-25 °C Pipe connections Withdrawal Diameter 18 mm Admission Diameter 16 mm Sound data Noise level 43 dB(A) Fan data Achievement 35 W Air flow 1100 m³/h Number of fans 1x 300 pcs. Thermal Contact internal Fan speed 1200 min-1 Throwing distance 7 m Volume Pipe content 3.4 l

High capacity oil cooler, Schimpke prod., type DK68V / 50, 6200 kcal/per hour, oil Durchflus 36 - 51Ltr rpm installation _ compressor, fan, .uber filters extraction.

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

Enclosure cooler, Mclean, M280426G032, nVent Hoffmann, mint condition Special price The current price of a similar product is € 4.800 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! We have tested the switch cabinet cooler - it cools immediately! The part was purchased from a company's spare parts warehouse and had been in stock there for some time, but judging by its condition it had never been in operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aus ...

2930-12-334-9277 / 0052000675

2930-12-A07-0048 0030982820

2930-12-378-7717 5260981120

2930-12-378-7720 5260981220

Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340

Siemens Gas Engine Guascor HGM 560 Siemens Gas Engine Guascor SFGLD 560 Orginal Part Number 7673532

General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

Hydraulic oil cooler AC-M3 High efficiency and stability: Under the action of the fan, the air is used as the cooling source to force the heat away so as to obtain the cooling effect of low cost and high efficiency and the best radiator. The AC-M3 is an industrial hydraulic oil cooler equipped with a 24-volt DC motor. This cooler is specifically designed for use in mobile machinery such as cranes, concrete pumps, and earthmoving equipment. The cooler ensures efficient cooling of the hydraulic system oil and keeps it at an optimal temperature. Nebmev D Dubsy Ex Ipscu Specifications: Cooler type: AC-M3 Voltage [V]: 24 Liquid flow rate [l/min]: 180 Airflow [m³/h]: 1860 Fan motor power/current consumption [kW/A]: 0.35 / 13.5 Recommended fuse [A]: 20.0 Fan diameter [mm]: 305 Noise level (at 1 meter) [dB(A)]: 78.0 Volume [l]: 3.2 Weight [kg]: 14.6

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675

MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820

General Information Brand: Nissens Product Type: Hydraulic Oil Condenser Dimensions (LxH): 150 × 210 cm Quantity: 1 unit Price: Per piece Technical Specifications Cooling Motor: Power: 2 × 2.2 kW (Total: 4.4 kW) Voltage: 230V / 400V Speed: 950 rpm Number of Motors: 2 pieces Operating Parameters: Max Operating Pressure: 5 Bar Max Temperature: -30°C to 65°C Cooling Type: Air-cooled Cooling Medium: Hydraulic oil Key Features ✅ High Cooling Efficiency: Designed for heavy-duty hydraulic applications ✅ Durable Construction: Built to withstand industrial conditions ✅ Dual Motors for Enhanced Performance: Ensures optimal heat dissipation ✅ Wide Temperature Range: Operates in extreme temperatures ✅ Versatile Voltage Compatibility: Supports both 230V and 400V systems Typical Applications Hydraulic Systems: Cooling oil in industrial hydraulic  ...

MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120

JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340

MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...

GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532