cool used for sale

Step drill bit with internal cooling GÜHRING diameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm ) solid carbide DK480UF shank: Ø 25 mm with internal cooling ! ground !, Dimensions: 120 x 25 x 25 mm

Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects.

Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,

Stainless steel bar belt for Technopool spiral cooler Length (linear metres): approx. 260 - 280 m Total width: 900 mm Working width: 760 mm Distance between rods: 30 mm Availability: as of now

SNA-11 Cooling Systems / Cooling Units Location B - Room E04, Cooler and K17, Ventilation 2 units Type Carrier 09CLU04090AF, functional, Built: 1992, HD Condenser Manufacturer: Carrier Refrigeration Technology GmbH Technical Data: - Refrigerant R 422; 25 bar - Includes 2 motors 65M07/65M08; KÜHNE KPER100L, Built: 1991, - 2.2 kW; 380V; 50Hz - Compressors from COPELAND DMRH 750EWM000 Find more here - / Contact us at -

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition

Power 4.3 kW, 220 V 50/60 Hz, Weight 57 kg R410A refrigerant. 1000 g 5 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg R410A refrigerant. 970 g 3 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

General Information Product Type: High Flow Oil Cooler Application: Designed for cooling oil in large machinery Cooling Units: 3 identical condenser units (each can operate separately) Quantity: 2 pieces available Price: Per piece Technical Specifications Motor: Voltage: 380-420V / 660-720V Speed: 1460 rpm Ncsbmjv Edh Rjy Ex Ipsu Power: 11 kW Quantity: 2 pieces Cooling System: Number of Condenser Units: 3 (independent operation) Cooling Type: Oil cooling Key Features ✅ High Cooling Capacity – Built for large industrial machines ✅ Independent Operation – Each condenser unit can function separately ✅ Versatile Applications – Can be adapted for different uses ✅ Durable & Heavy-Duty Design – Engineered for continuous operation ✅ Multiple Voltage Compatibility – Works with both 380-420V and 660-720V power sources Typical Applications Hea ...

Benchtop centrifuge cooled Manufacturer: Hettich Type Rotanta 460 R Year of construction 2017 Rated voltage 220-240 V 1 Connected load 1,800 VA Max. capacity 4x 1,000 ml Weight approx. 141 Kg Temperature control, infinitely variable from -20 to +40 °C Including 6-fold angle rotor Dimensions: 770x706x456 mm, weight 141 kg Documents available

- Cooling lubricant basin  - Filtecci filter system  - Grundfos CR 90-2 (standard)  - GEA plate heat exchanger  - Collecting tray fleece according to ZNG - if required or container  - Transport trolley fleece according to ZNG - if required or container  - LxWxH 4500x2600x2100 - Emulsion capacity 1500 l/min at 4 bar

A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible.

Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator., container content: 4000 l , Flow rate max: approx. 360 l/min., Filter fineness:: greater than 0.003 mm, Connected load approx.: 9.0 kW (400 V / 50 Hz), Dimensions W x D x H: 6000 x 1200 x 1650 mm, Weight approx.: 2000 kg, colour: light grey

Suitable for cleaning cooling oil for grinding hard metal., container content: approx. 500 l, Filter performance: approx. 180 l/min, Filter fineness: >0.003mm, Connected load: approx. 4 kW (400 V/ 50Hz), Dimensions: W x D x H approx. 1600 x 1000 x 1000 mm, weight: approx. 1000 kg, mass: about 1000 kg, colour: light gray

A Göztepe belt cooling machine (cooling tunnel), which was used to extend product life, is available. Motor power: 4kW, inlet height: 1670mm, outlet height: 1150mm, base distance: 2000mm, working length: 8500mm, machine dimensions X/Y/Z: approx. 8600mm/1900mm/2600mm. Documentation available. On-site inspection is possible.

• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide control (3 each a ...

A surface cooler with various small appliances is available. 1) Surface cooler Heatcraft Europe FC PU06DL02D3 1C4 33 B, volume flow: 62dm³. 2) KSB pump, year of manufacture: 2020, output: 4kW. 3) Lifting machine for coil holder Oerlikon HM-2529. 4) Blower Ferrari FR 1001 N04S/3RD 90, year of manufacture: 2019, speed: 1500 rpm, max. temperature: 100°C, power: 75kW. Documentation available. On-site inspection is possible.

Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

Two identical Renova cooling units with Frascold compressors are available. Connected load: 19.6kW, cooling capacity: 38.6kW, temperature range: 0°C to +45°C, refrigerant: R449A, machine dimensions X/Y/Z: approx. 1500mm/2300mm/1500mm, weight: approx. 520kg. Documentation available. On-site inspection is possible.

An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible.

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.

Equipment: Heatable/coolable, Insulation, Overpressure,Condition: used,Volume: 180.000,Max. overpressure: 1.5,Max. permissible Operating temperature : 18,Lower shelf: cone bottom,Design: hanging,Heating/cooling (filter bar): available,Volume double jacket: 1.462,0,Max. permissible Operating temperature : 20,Temperature control cylinder: half-tube coil,Insulation: available,Diameter inside: 4.100,Diameter outside: 4.500,Cylindrical height: 12.000,Total height: 17.000,Technical documentation: Drawing,Manhole / dome: in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Last use:

Equipment: heatable/coolable, overpressure, vacuum, manufacturer: Schleifenbaum & Weber, condition: used, volume: 49,338, vacuum: 1.0, max. overpressure: 6.0, specific gravity of the medium: 1.5, lower shelf: clapper bottom, upper shelf: clapper bottom, design: upright, stand form: feet, number of feet: 4, heating/cooling (filter bar): available, max. permissible Operating overpressure: 6.0,Max. permissible Operating Temperature : 200,Temperature Control Cylinder: Half Tube Coil,Temperature Control Underbody: Half Tube Coil,Diameter Inside: 2,800,Diameter Outside: 3,100,Cylindrical Height: 7,483,Total Height: 10,000,Wall Thickness Underbody:

Equipment: heatable/coolable, insulation, agitator,Manufacturer: ETA,Condition: used,Volume: 21,940,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Heating/cooling (filter bar): available,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 2,830,Diameter outside: 3,000,Cylindrical height: 3,400,Total height: 5,000,Type plate: Yes,Equipment: Level indicator (without guarantee), Crane eyelets,Outlet: available,outlet : 50,remarks: bottom of the tank and 1/3 of the cylinder temperature-controlled,last use:

Equipment: Heatable/coolable, Insulation,Manufacturer: Apparatebau Nordhausen,Condition: used,Volume: 100,000,Lower shelf: Cone floor,Design: hanging,Heating/cooling (filter bar): available,Volume double jacket: 615,0,Max. permissible Operating overpressure: 2.0,Temperature control cylinder: half-pipe coil,Insulation: available,Diameter inside: 3,190,Diameter outside: 3,440,Total height: 15,970,Technical documents: Drawing,Type plate: Yes,Equipment: Crane eyelets,Outlet: DN80 DIN 11851 ,Remarks: The double jacket (615 liters) is divided into a total of 4 chambers,Last purpose:

The LSBLG540/MCF-V is a high-efficiency, inverter-driven chiller that delivers cooling for medium to large-scale industrial and commercial applications. With a focus on energy savings, smart technology, and eco-friendly refrigerants, it is designed to offer reliable and sustainable performance in various environments. Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Nik Faris (nik_faris@topglove.com.my) Mohd Zulkifli (mhdzulkifli@topglove.com.my) Incoterm: EX WORK Currency: USD

1.250 litre, Stock number: T3552, Litre: 1.250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cooling tank, Standing: Frame with 6 pcs. legs, Top: Open, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Motor: Cooling compressor, Inner diameter: Ø 1300 mm., Outer diameter: D 1420 mm., Dimensions: L 2170 x H 1200 mm., Manufacturer: Alfa Laval

MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;

Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17Ident. No: 0495078 Order No: 915979 year of construction 1992Metal link width 200 mmDistance driver bars approx. 380 mmLength of possible chip removal 1100/2100 mmInsertion length approx. 1350 mmInsertion height 370 mmInsertion width 460 mmHopper width at the top 400 mmHopper width at the bottom 170 mmConveying height - discharge height approx. 1250 mmMotor power belt drive 0.37 kWNetz connection 400 volts, 50 Hz- Drive of the scraper chain via geared motor-

Cooling unit, cooling water recirculating cooler, water cooler, chiller O. HellwigYear of construction: approx. 1995Cooling capacity approx. 6 kWNight cooling unit 3 kWaverse refrigerant R422DWasser tank capacity approx. 35 litresFlow volume circulation pump 40 litres/minPump capacity 0.63 kWWasser connections 1/2 inchMains connection 380 volts, 50 Hz- temperature setting via rotary potentioSpace requirement L x W x H 1100 x 750 x 140 mmWeight 285 kg; used

Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2

Allestimento: Heating/Cooling,Stato: used,Volume / Litri : 8.310,Tipologia: cubic,Piedi : feet,Heating/cooling (filter bar): present,Altezza Totale: 2.400,Larghezza Totale/mm: 1.400,Lunghezza Totale/mm: 3.100,targa identificativa: No,Accessori : Outlet tap,Osservazioni: Cooling by internal cooling plate Manhole in the front floor available Container photos may show similar and not the exact container ,ultimo settore dutilizzo: Wine,Materiale a contatto con il prodotto: V2A 1.4301 (AISI304),Piletta di fondo : No, Frangiflutti: No, Piletta di fondo :

Allestimento: Heating/cooling,Stato: used,Volume / Litri : 13.500,Tipologia: cubic,Piedi : feet,Heating/cooling (filter bar): present,Altezza Totale: 2.940,Larghezza Totale/mm: 1.820,Lunghezza Totale/mm: 3.400,targa identificativa: No,Accessori : Disc,Osservazioni: Manhole in the front floor available Container photos may show similar and not the exact container ,ultimo settore dutilizzo: Wine,Materiale a contatto con il prodotto: V2A 1.4301 (AISI304),Piletta di fondo : No, Frangiflutti: No, Piletta di fondo : No,Frangiflutti: No

Allestimento: Heating/cooling,Stato: used,Volume / Litri : 12.310,Tipologia: cubic,Piedi : feet,Heating/cooling (filter bar): present,Altezza Totale: 2.750,Larghezza Totale/mm: 1.500,Lunghezza Totale/mm: 4.250,targa identificativa: No,Accessori : outlet tap,Osservazioni: cooling by internal cooling plate manhole in the front floor available Container photos may show similar and not the exact container ,ultimo settore dutilizzo: Wine,Materiale a contatto con il prodotto: V2A 1.4301 (AISI304),Piletta di fondo : No, Frangiflutti: No, Piletta di fondo :