137,074 used machines on RESALE, but how to find them? Machine Search
Enclosure cooler, Mclean, M280426G032, nVent Hoffmann, mint condition Special price The current price of a similar product is € 4.800 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! We have tested the switch cabinet cooler - it cools immediately! The part was purchased from a company's spare parts warehouse and had been in stock there for some time, but judging by its condition it had never been in operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aus ...
Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340
Siemens Gas Engine Guascor HGM 560 Siemens Gas Engine Guascor SFGLD 560 Orginal Part Number 7673532
General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829
The used coolant cleaning system based on centrifuge is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or clean oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Pump capacity of supply pump 1 (for process supply): up to 80 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtration system and is cleaned in the centrifuge. Stage 1: Filtration by a centrifuge, without consumables, the ...
The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtra ...
MWM TCG 2020 V12-Nr. MWM TCG 2020 V16
MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920
MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675
Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 2 ...
MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820
MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120
MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120
pHcbi MDF-DU901VHL-PE VIP ECO ULTRALOW FREEZER. The MDF-DU901VHL-PE VIP ECO -86°C ultra low temperature freezer provides maximum sample storage capacity within an optimum footprint combined with natural refrigerants to minimise energy consumption, reduce environmental impact and save money. 845 litre capacity. External dimensions (excl. handles & protrusions): 1150 x 870 x 1990mm (wdh). Internal dimensions: 1010x 600 x 1400mm (wdh). CFC free insulation and refrigerant. VIP Plus Insulation. Large LCD touchscreen Controller with graphical display of recent temperature history and USB port for data export. Fully automatic audible / visual alarm System complete with remote alarm connection. Status Alert monitors ambient and System conditions and notifies of any abnormal Operation. New EZIatch door handle with lockable outer door and with door hotline to prevent ice build up and two fully in ...
JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340
GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532
JENBACHER TYPE 3 Heat Exchangers Charge Air Coolers Intercoolers 6141424 / 1212197 / 369829
MyRef MY-ZB26-TFD Refrigeration Unit MyRef MY-ZB26-TFD Condensing unit suitable for refrigeration applications Typical applications include Freezers in supermarkets and mini-markets Cold stores Beer cellar Milk cooling systems Standard equipment Copeland Scroll M Compressor ZB series with sound insulation hood Oil sump heating Liquid collector with burst protection Filter dryers Sight glass visible from the outside Ball shut-off valves Component-tested combined HD/LP safety pressure switch Electrical equipment: control box IP 55, compressor contactor, DIN rail mounting Condenser is integrated into the housing Condenser fins coated with epoxy resin phenol (gold lacquer) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; All screws ...
MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511
MTU 8V396 TB 53 2930-12-334-9601 / 0010985920
MTU 8V396 TB 53 2930-12-334-9277 / 0052000675
MTU 16V4000 M 90 A BANK 2930-12-378-7717 5260981120
Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...
Linear cooler for donats/pastries/cakes etc. Linear cooler, consisting of the following components: - Conveyor belt with drive - Insulating housing - Evaporators and others - Refrigeration technology - Control cabinet Geometric specifications External dimensions Length: approx. 7,800 mm Width: approx. 1,800 mm plus control cabinet Height: approx. 2,400 mm plus valve station Inlet height: approx. 880 mm Spout height: approx. 1,030 mm Technical performance data using the following example: Nougat Donut (Master) Product weight: approx. 80 g Product size (Ø x H) approx. 100 x 35 mm Processing capacity: 320 kg/h = 4,000 pcs/h Throughput time: approx. 3.5 min, adjustable Power connection: 400 V, 3 Ph, 50 Hz Total power requirement: 30 kW Radiator dimensions (LxWxH): 7,800 x 1,800 x 2,400 mm Condition: well-maintained, fully functional Availability: immed ...
MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120
JENBACHER TYPE 4 J414 / J416 / J420 PNo: 1202340
GUSCOR HGM560 / SFGLD560 Part Number 7673532
Size: 80cm wide and 180cm high Price on request Contact details can be found under Contact
Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator -Manufacturer: Opel, water cooler -Type: unfortunately not known -Hole spacing: lengthways 280 mm/crossways 445 mm -Dimensions: 460/165/H450 mm -Weight: 5.1 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg
RECON Charging air cooler ready To be delivered also used
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg
Hydraulic pump, oil pump, gear pump -Manufacturer: Garbe Lahmeyer, pump from radial drilling machine Kolb NKR 55 -Type: AV15 / 15 P -Power: 0.6 kW / 1390 rpm -Dimensions: 420/280/180 mm -Weight: 24 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: 380 volts -Power: 0.75 kW -Dimensions: 400/200/H430 mm -Weight: 40 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: volts -Power kW - Delivery rate: 100 l / min -Dimensions: O 250 / H330 mm -Weight: 20 kg
Temperature control device Manufacturer: Tool Temp AG (Switzerland) Type: TT-162E No.: 21-02064-1 with CE mark LWH: 600 x 300 x 750 mm
Cooling tumbler, vacuum tumbler, tumbler, vacuum mixer, vacuum mixing machine -Capacity: 1300 liters -Max. Vacuum: 950 mbar -Equipment: ejection flap, cooling housing, cooling -Dimensions: 2370/1500/H2320 mm -Weight: about 1500 kg
GWK KU 90-108 Process Cooling Heat exchanger radio stainless steel FP 50-91 , 1006 kW Flow rate operating water circuit: 92 qm/h Cooling water circuit: 109 sqm/h Connection power: 22kW Head: 52 mWS 2 pieces available
Temperature control device Manufacturer: gwk Type: teco cs 90 N°: 11936 Y.O.M.: 2002 Heating capacity: 9 kW Rated cooling capacity: 23 kW Maximum temperature circulating medium: 95° C LWH: 900 x 260 x 600 mm
Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg
Mounting table with cooling, cooling table used Manufacturer unknown cooled area: approx. 1270 x 690 mm Total dimensions 1400 x 800 x 770 mm The table consists of two solid steel plates, presumably straightening plates made of cast iron. On the lower table are mounted 8 cooling elements that protrude into the ribs of the upper table. The upper table is covered with stainless steel sheet. Cooling is probably done by nitrogen. The table was probably used in joining shrinkage e.B. gearbox mounting Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
Recon 944768/20-2123 Draw B20-10-164 10bar shell/5bar tube Test 15bar-7.5bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...
Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan -Dimensions: 300/160/H360 mm -Weight: 9 kg
used
Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48 700 watts new condition with operating instructions LWH: 1600 x 600 x 1400 mm
maximum number of results exceeded
please refine your search
