cool used for sale

Megatron Cool is a microprocessor-controlled ophthalmological system for the anterior and posterior segments of the eye. With the Phaco technique used, the emitted ultrasound energy is significantly reduced compared to the traditional pulse mode. It can therefore be used for the latest surgical techniques such as CMP and MICS. Application: • Cataract surgery (cataracts) • Vitrectomy (vitreous surgery) • I/O flush-suction process • Diathermy (coagulation of tissues) • Light source for endo lighting Unchecked from a practice liquidation Auction-ID: A7-45427-3

Cooling unit, chiller, chiller approx. 30 kW

GEA Refrigeration Germany GmbH screw cooling compressor, type: Grasso MR-M2655S-28, serial number: M1949, year of construction: 2014, geometric volume: 3912 CM³/rot, flow rate: 845 m³/h, allowable pressure: 28 bar, max speed: 4500 rpm, refrigerant: NH3 R717, empty weight: 3090 kg, with WEG motor, power: 160 kW, dimensions cooling compressor: 3300 mm x 1300 mm x 2300 mm, dimensions switch cabinet: 2400 mm x 600 mm x 2200 mm.

Landteknikk A/L cooled mixing tank, type: 15V, number: 711289, year of construction: 1971, 220 V, 3 Ph, 50 Hz, 2200 W, volume: 1500 liter, DWM Copeland cooling compressor, type: DLFL-20X-EWL-000, dimensions: 3500 mm x 1050 mm x 1550 mm.

GEA Grasso reciprocating cooling compressor, type: GRASSO 612E PACKAGE, number: 05081362, year of construction: 2005, PS: 25.5 bar, TS: -10/170 °C, refrigerant: NH3, dimensions: 3200 mm x 1200 mm x 1900 mm. If desired, the concrete base is included, but this is not mandatory, dimensions concrete base: 3000 mm x 2000 mm x 450 mm. Switch cabinet is another lot number, see lot number 8.

Speed 1400 1/min, max. pressure 25 bar Auction-ID: A7-45702-19

Volume 152.6 l, max. pressure 32 bar Auction-ID: A7-45702-15

Tecnopool spiral cooler, model: TW 4-350, serial number: I0002129-001330, year of construction: 2018, plastic mesh belt, belt width: 330 mm, total belt length: 192000 mm, useful belt length: 173000 mm, tier length: 19463 mm, tier pitch: 220 mm, clearance between tiers: 170 mm, maximum product height: 1.1-2.75 m/min, belt cleaning system. Cooling compressors not included. Lot is already dismantled and ready for transportation.

Volume 17.5 l, max. pressure 32 bar Auction-ID: A7-45702-17

Volume 152.6 l, max. pressure 32 bar Auction-ID: A7-45702-16

Well-driving car with new MOT Auction-ID: A1-42013-186

Approximate dimensions: 4500 x 2500 x 2500 mm Refrigerant: R407C Load: 2 kg Maximum pressure: Gas: 2.8 MPa Air: 1 MPa Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-716

Chamber type: Single chamber Exterior depth: 4800 mm Exterior width: 3200 mm Exterior height: 2430 mm including ventilation Interior depth: 4560 mm Interior width: 2960 mm Interior height: 2160 mm Door: Single sash. 2000 x 1200 mm Air fan: 432 x 403 x 416 (W/D/H) by Maiko, Typ. DER 40, with status display, test room temperature setpoint. Auction-ID: A1-45762-64

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485; Auction-ID: A1-45773-330

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485; Auction-ID: A1-45773-331

Mitsubishi - TU73D refrigeration unit, Volvo FM9 Refrigeration van - Two compartments - Mitsubishi TU 73 D Multi temp cooling engine, can also be connected electrically - Engine type Volvo D9A260 - Power 260 hp (191 kW) at approx. 2000 rpm - Torque Approx. 1250–1300 Nm at 1200–1500 rpm - Fuel system Common rail diesel injection - Turbo Yes, with intercooler - Tailgate D'Hollandia 2500 kg - Spare wheel new - MOT until 7-2-2026 Belgian papers Auction-ID: A1-40243-21

Additional title: y. o. c.: mostly 2003, Finished wort: 15000 l , Grist: 2500 kg, Current: three-phase A.C. current, Voltage: 400 V, Frequency: 50 Hz, Features: lauter tun, low pressure cooking wort copper-whirlpool system with external wort boiling system, additional whirlpool, trub collecting unit, hop dosage , Periphery: lauter wort heater, vapor condenser

NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control, Additional title: refrigerant ammonia, Brew water flow: 5 m³/h 2 bar, Ice water flow: 15 m³/h 2 bar, Refrigerant capacity: 85 kg Ammonia, Compressor capacity: 145 m³/h, Power: Q0: 2 x 119 kW, Operation / Control: Siemens S7, Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pum ...

Volume-dependent dual system, Additional title: Separator, condenser and control cabinet from 2010, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet

liter capacity:21 l/min Pressure of coolant:50 bar rated current:20 A Clean water tank capacity:300 l total power requirement:16 kW weight of the machine ca.:200 Kg dimensions of the machine ca.:1,2 x 0,8 x 1,4 m We are importers for FRASCARA high pressure coolant systems Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min. We can provide up to 3 pressure levels controlled by M-Functions. Oil operated systems are available also. Areas of application: Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines Function: The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spin ...

Water-cooled multi-process welding machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 60% duty cycle (250 A) Equipped with: LCD color display Equipped with: water cooler for MIG/MAG torch Includes: water-cooled MIG/MAG torch Including: TIG torch with accessories Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging

SUCHY, Nr 131/08, calibration unit, year of construction 11/2008, WOB 3700mm, 2 Coolable steel rollers, incl. 2 cooling units ERS, type SC 5.2V, temperature range +10...+32°C, useful cooling capacity per 6000W, embossing, smoothing and compacting different materials with high, uniform contact pressure and Precise temperature constancy