137,668 used machines on RESALE, but how to find them? Machine Search
- Cooling water line MWM 12300048 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...
- Cooling water line MWM 12300542 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...
Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...
Rittal PS 4806 Modular enclosure Product Modular system PS 4000 Manufacturer: Rittal Clamping system: PS 4000 Model No.: PS 4806 Housing frame: sheet steel 1.5 mm Roof: sheet steel 1.5 mm Door: Sheet steel 2.0 mm Rear panel: sheet steel 1.5 mm Mounting plate: sheet steel with zinc coating 3.0 mm Floor plates: sheet steel 1.5 mm Housing frame: dip primed Door, roof and rear wall: dip-primed Powder-coated exterior, textured paint Colour: RAL 7035 4 transport eyelets Wiring diagram pocket made of sheet steel 4118000 Swivel frame, large 19" 44 U Plinth system as a stable cabinet base Control cabinet cooling unit SK 3296100 Dimensions (HxWxD) 2500 x 800 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Height 1250 Width 1000 mm Length 1500 mm Capacity 700 l Voltage Electrical: 400V 50Hz 3N Installed Power 2.4 kw Main material Stainlees Steel Time of realisation 2-3 weeks With With mixer
Machine Type: Water Circulation Cooling Unit Make Jäckle Type FKG 3 Connection for the welding machine 230 V Schuko coupling Connection voltage 1 x 230 Volt Power connection 230 V Schuko plug Water pressure 3 bar at 2.3 ltr./min. Cooling capacity 1,000 W Burner connection 2 quick-release couplings Water tank 5.4 ltr. Content Dimensions L x W x H 1,080 x 520 x 830 mm Weight 44 kg Age approx. 10 years Condition workshop tested incl. UVV protocol Warranty: 6 months from the date of delivery Original price €1,350.00 + VAT Your price €590.00 + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Straße 31 81249 Munich The contact person is Mr. Manuel Maier. Of course, we will ship the machine to you for 60,- € by freight forwarder thro ...
Specifications General Drain spout G 3⁄4 inches Fin spacing 7.0 mm Type GDF030.1C/17-AN150 Electrical data Power consumption Fan 0.28 A Supply voltage Fan 230-1-50 V/Ph/Hz Flats Surface 8.8 m² Weight Net weight 16.3 kg Performance data Rated power 1.8 kW Temperature difference = 8 °K , evaporation temperature = -8 °C 1.5 kW Temperature difference=7 °K, evaporation temperature=-25 °C Pipe connections Withdrawal Diameter 18 mm Admission Diameter 16 mm Sound data Noise level 43 dB(A) Fan data Achievement 35 W Air flow 1100 m³/h Number of fans 1x 300 pcs. Thermal Contact internal Fan speed 1200 min-1 Throwing distance 7 m Volume Pipe content 3.4 l
Enclosure cooler, Mclean, M280426G032, nVent Hoffmann, mint condition Special price The current price of a similar product is € 4.800 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! We have tested the switch cabinet cooler - it cools immediately! The part was purchased from a company's spare parts warehouse and had been in stock there for some time, but judging by its condition it had never been in operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aus ...
The used coolant cleaning system based on centrifuge is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or clean oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Pump capacity of supply pump 1 (for process supply): up to 80 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtration system and is cleaned in the centrifuge. Stage 1: Filtration by a centrifuge, without consumables, the ...
The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtra ...
RECON - with cooled exhaust seat rings - heavy fuel ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
High capacity oil cooler, Schimpke prod., type DK68V / 50, 6200 kcal/per hour, oil Durchflus 36 - 51Ltr rpm installation _ compressor, fan, .uber filters extraction.
Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 2 ...
Many thanks for your interest on our new cooling table for chocolate or sugar-, candydough, please find follow our offer: cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 2000 x 1500 x 750mm Or : 2500 x 1000 x 750mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: - folded plates made of stainless steel - Standing on 4 feet, (square tube 80 x 80 x 5) - foldable edge from square tube 40x40, - 1 x safety valve 0.5 bar) - 1 x Pipes for water circulation I offer this machine as New machine
pHcbi MDF-DU901VHL-PE VIP ECO ULTRALOW FREEZER. The MDF-DU901VHL-PE VIP ECO -86°C ultra low temperature freezer provides maximum sample storage capacity within an optimum footprint combined with natural refrigerants to minimise energy consumption, reduce environmental impact and save money. 845 litre capacity. External dimensions (excl. handles & protrusions): 1150 x 870 x 1990mm (wdh). Internal dimensions: 1010x 600 x 1400mm (wdh). CFC free insulation and refrigerant. VIP Plus Insulation. Large LCD touchscreen Controller with graphical display of recent temperature history and USB port for data export. Fully automatic audible / visual alarm System complete with remote alarm connection. Status Alert monitors ambient and System conditions and notifies of any abnormal Operation. New EZIatch door handle with lockable outer door and with door hotline to prevent ice build up and two fully in ...
Lowara pump FHS 100-200/300 ELP 120-310m ³/h 47m - 22, 6m, P2 30KW, incl. non-return valve and line reducing valve
MyRef MY-ZB26-TFD Refrigeration Unit MyRef MY-ZB26-TFD Condensing unit suitable for refrigeration applications Typical applications include Freezers in supermarkets and mini-markets Cold stores Beer cellar Milk cooling systems Standard equipment Copeland Scroll M Compressor ZB series with sound insulation hood Oil sump heating Liquid collector with burst protection Filter dryers Sight glass visible from the outside Ball shut-off valves Component-tested combined HD/LP safety pressure switch Electrical equipment: control box IP 55, compressor contactor, DIN rail mounting Condenser is integrated into the housing Condenser fins coated with epoxy resin phenol (gold lacquer) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; All screws ...
Coolant storage device consisting of metal tank (tank size: 16 litres), coolant pump, hoses and fitting.
2930-12-334-9277 / 0052000675
2930-12-A07-0048 0030982820
2930-12-378-7717 5260981120
2930-12-378-7720 5260981220
Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340
Siemens Gas Engine Guascor HGM 560 Siemens Gas Engine Guascor SFGLD 560 Orginal Part Number 7673532
General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829
MWM TCG 2020 V12-Nr. MWM TCG 2020 V16
MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920
MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675
Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...
MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820
MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120
MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120
JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340
GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532
JENBACHER TYPE 3 Heat Exchangers Charge Air Coolers Intercoolers 6141424 / 1212197 / 369829
MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511
Linear cooler for donats/pastries/cakes etc. Linear cooler, consisting of the following components: - Conveyor belt with drive - Insulating housing - Evaporators and others - Refrigeration technology - Control cabinet Geometric specifications External dimensions Length: approx. 7,800 mm Width: approx. 1,800 mm plus control cabinet Height: approx. 2,400 mm plus valve station Inlet height: approx. 880 mm Spout height: approx. 1,030 mm Technical performance data using the following example: Nougat Donut (Master) Product weight: approx. 80 g Product size (Ø x H) approx. 100 x 35 mm Processing capacity: 320 kg/h = 4,000 pcs/h Throughput time: approx. 3.5 min, adjustable Power connection: 400 V, 3 Ph, 50 Hz Total power requirement: 30 kW Radiator dimensions (LxWxH): 7,800 x 1,800 x 2,400 mm Condition: well-maintained, fully functional Availability: immed ...
Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator -Manufacturer: Opel, water cooler -Type: unfortunately not known -Hole spacing: lengthways 280 mm/crossways 445 mm -Dimensions: 460/165/H450 mm -Weight: 5.1 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg
MTU 8V396 TB 53 2930-12-334-9601 / 0010985920
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg
Hydraulic pump, oil pump, gear pump -Manufacturer: Garbe Lahmeyer, pump from radial drilling machine Kolb NKR 55 -Type: AV15 / 15 P -Power: 0.6 kW / 1390 rpm -Dimensions: 420/280/180 mm -Weight: 24 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: 380 volts -Power: 0.75 kW -Dimensions: 400/200/H430 mm -Weight: 40 kg
MTU 8V396 TB 53 2930-12-334-9277 / 0052000675
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: volts -Power kW - Delivery rate: 100 l / min -Dimensions: O 250 / H330 mm -Weight: 20 kg
Cooling tumbler, vacuum tumbler, tumbler, vacuum mixer, vacuum mixing machine -Capacity: 1300 liters -Max. Vacuum: 950 mbar -Equipment: ejection flap, cooling housing, cooling -Dimensions: 2370/1500/H2320 mm -Weight: about 1500 kg
Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg
maximum number of results exceeded
please refine your search
