conveyor roller used for sale

Op maat gemaakte, zware kraan, ideaal voor lage gebouwen, maar ook om de maximale hijshoogte binnen het gebouw maximaal te benutten.nbsp;Dit komt doordat de twee takels tussen de twee hoofdbalken zijn geplaatst (in plaats van erbovenop te rijden). Kind of: overhead travelling crane Capacity: 16 + 16 ton Span: 22 000 mm Drop: 8 meter Tackle speed: 0,6 > 4 m/min Weight: 26 ton Radiocontrol: radio control

Professional motorized belt conveyor for the transport and transfer of products in a production line, especially in the food, bakery and pastry sectors. The machine is equipped with a conveyor belt, stainless steel side guides to hold the products on the work area and an electric geared motor to drive the belt. Metal frame construction with adjustable feet for easy leveling and integration into an existing line. Auction-ID: A3-46129-37139

including rails (rails bolted to ground, studs need to be ground off) Auction-ID: A1-50566-1010

Band width: approx 85 cm. In the current set-up consisting of 5 lanes, estimated at 1 x +- 26 meters, 1 x +- 23 meters, 1 x +-6 meters, 1 x +-7 meters, 1 x +-12 meters, in transit and elevator with standing profiles up to +- 470 cm height. Including drive motors, excluding control system. Conveyor belt installation is built in between site 1002 and site 1003. Pick-up by appointment. Auction-ID: A1-50566-1001

2018 Kronen KUJ cube, strip and slice cutting machine – used, Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing., This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/kronen-kuj-2/, Machine type: Cube, strip and slice cutting machine, Condition: Used, Cutting types: Cubes, strips and slices, Infeed: Inclined cleate ...

Connecting conveyor belt size: 1500 x 610 x 950 mm (WxDxH) Auction-ID: A7-50729-130

Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-50729-13

Height: 6 m Additional information: Never use Auction-ID: A1-50704-404

Sorting and feeding station with double spiral conveyors Complete feeding and sorting station consisting of two spiral conveyors (Sortimat), each with stainless steel bunker attachment, internal insulation and a downstream separation and transfer system. The system was used in an industrial assembly line for parts feeding. The unit stands on a stable steel frame (painted blue). Each spiral conveyor has its own control units (Sortimat), consisting of: Bunker controller Spiral conveyor controller Rail/vibrator regulator All controllers are individually adjustable. Technical data: Length: approx. 210 cm Width: approx. 180 cm Total height: approx. 145 cm Auction-ID: A7-50729-29

Sortimat Spiral Conveyor / Feeding System Manufacturer: Sortimat Technology GmbH & Co.Machine No.: 0000F20756 / 0000F20759 Year of Construction: 2010 Condition: Used, functional from ongoing production, visually with signs of use Complete Sortimat spiral conveyor with stainless steel bowl (Ø 40 cm) Linear conveyor (rail) with adjustable feed intensity Base frame made of stable steel frame Control units Sortimat (frequency controller for pot and Rail) Various pneumatic and sensor cables available Completely assembled feed line with several guides Technical data: Type spiral conveyor (pot): n.b.Type linear conveyor / rail: Sortimat SML 40/300 Diameter spiral conveyor: approx. 39–40 cm Width of sorting magazine / rail: approx. 80 cm Total length of system: approx. 120 cm Total width of system: approx. 70 cm Total height of system: approx. 160 cm Electrical connection: Spiral Conve ...

Automated feeding and assembly system with vibratory conveyors (mirrored, double) Automated feeding and assembly system, consisting of two identical, mirrored lines. All essential assemblies are available in 2 parts. Manufacturer / Components (excerpt): Vibratory conveyor technology: AViTEQ Vibrationstechnik GmbH Type: KFO 7-1-SIM, year of construction 2019, 230 V / 50 Hz Vibratory conveyors / controls: SIM round conveyor type SF 500, year of construction 2020, 230 V / 50 Hz Various SIM control units (bunkers, round conveyors, conveyor belt) Equipment / construction: 2 × round vibratory conveyors (Ø approx. 500 mm) 2 × bunker systems 2 × conveyor belts Linear feeding lines Pneumatic separation and transfers Aluminium profile frame Central control with SIM controllers System mirrored (left/right identical)Condition : Used, system comes from industrial use Technical data: Size: ap ...

Gravity Roller Conveyors – 3 pcs. Lot 118 comprising three used non-powered roller conveyor sections with galvanized steel rollers, blue steel side frames and adjustable support legs with floor mounting plates. Suitable for manual or gravity transfer of panels, boards and other flat workpieces. Quantity: 3 sections Operation: Gravity operated Condition: Used Approximate dimensions per section: 3,000 × 800 × 1,000 mm Approximate weight: 100 kg per section All descriptions are indicative only. Auction-ID: A1-50546-118

- The conveyor belt has a metal support structure. - The installation includes an electrical panel and control elements. - Manual operation - Belt width: 1000mm - The scissor lift table shown in some photographs IS NOT included in the lot. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-13

Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data Manufacturer: Krones Model: AirCo Year of manufacture: 2011 Machine type: air conveyor, neck handling of empty PET bottles Total conveyor length: approx. 60 m Declining sections: 10 sections at 10°, approx. 16.8 m in total Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right Fan units: 7, each with filter housing Diverter: 1 Conveyor sections In  ...

Pouring height: 200 cm Sold with small conveyor. Auction-ID: A1-50867-37

Bandwidth 216 With transponder to measure the distance of the tire height due to speed Small tear in the bandsheet, however, this has no obstacle Power cream 380V Auction-ID: A1-47393-181

Specifications: - Product type: conveyor / belt conveyor - Version: horizontal conveyor belt - Tire type: rubber/plastic treaded tire - Belt surface: coarsely profiled / non-slip - Frame: steel construction - Frame colour: green - Electrically powered - CE components available - Length and bandwidth: to be measured Drive: - Engine brand: Transtecno - Engine type: TS711-4 - Engine serial number: 1705001 - Version: 3-phase asynchronous electric motor - Operating mode: S1 - Protection class: IP55 - Insulation class: F - Motor weight: approx. 5 kg - Cos φ: 0.73 Motor data at 50 Hz: - Power: 0.25 kW - Speed: 1,395 rpm - Voltage: 220–240 V Δ / 380–415 V Y - Current: 1.38–1.27 / 0.80–0.73 A Motor data at 60 Hz: - Power: 0.30 kW - Speed: 1,680 rpm - Voltage: 264–288 V Δ / 456–498 V Y Equipped with, among other things: - Profiled conveyor belt - Electric drive motor - Drive roller  ...

Hours: 01940,02 Power supply: 400 V, 3-phase, 50/60 Hz Largest Heater Load: 14.5 A Short Circuit Interrupting Capacity: 5,000 A CE marking Technical data: The 1707 MKIII has 7 upper and 7 lower heating zones with hot air convection. The heated process section is approximately 1.85 m, the maximum process temperature is 350 °C. As standard, printed circuit boards can be processed approximately 50–460 mm wide; the maximum transport speed is about 1.88 m/min. Please note: Lot 2 and lots 51-56 are sold only with reservations. The seller still has to confirm the bid Lot 2: the complete processing line. There you will also find a video on the individual process steps and machines Lot 51-56 Individual parts of the machining line. These are the same parts as Lot 2. Either Lot 2 OR Lot 51-Lot 56 is sold Auction-ID: A7-50858-55

Function: for surface cleaning/structuring/marking or for cutting/welding Laser 1: Part number. 3248890 Laser 2: Part number: 3248890 Laser power: 100 W Wavelength: 1064 nm Computer Datec: with Windows 11 Pro 64 bit, type: CLX 24-06232 Auction-ID: A7-50858-3

Metal detector on its own conveyor, This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes., The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/lock-met-30-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Belt: Modular plastic belt, Controls: Display with selection keys, stored product programmes, Construction: Stainless steel, frame on castors

Metal detector with conveyor and reject bin, This Goring Kerr metal detector (later part of Thermo) checks products for metal particles as they pass through the detector head on the belt. Products found to contain metal are rejected from the belt into the stainless steel reject bin., Belt and detector share a frame on castors, with their own control box for start, stop and emergency stop. We have not been able to confirm the model or year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/goring-kerr-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Reject: Reject bin beside the belt, Belt: Blue plastic belt, Controls: Own control box with start, stop and emergency stop, Construction: Stainless steel, frame on castors

Loma IQ3 metal detector on conveyor, built in 2022, This Loma IQ3 metal detector is mounted on its own conveyor with a 300 mm wide modular belt and a reject bin. The aperture is 350 × 100 mm (w × h), the belt is 2,300 mm long. The detector is operated via the touchscreen on the detector head., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2022-loma-iq3-metal-detector/, Type: Metal detector with conveyor, Aperture: 350 × 100 mm (w × h), Belt width: 300 mm, Belt length: 2,300 mm, Dimensions: Approx. 2,300 × 900 × 1,450 mm (l × w × h)

Minebea Intec metal detector on conveyor, built in 2021, This Minebea Intec metal detector is mounted on a mobile conveyor with a 350 mm wide modular belt, a reject unit and a roller section at the outfeed. The aperture is 400 × 165 mm (w × h), the belt is 2,100 mm long. The conveyor has a transparent guard over the belt., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2021-minebea-intec-metal-detector-conve yor/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,100 mm, Dimensions: Approx. 2,400 × 1,200 × 1,200 mm (l × w × h)

Sartorius MDP+ metal detector on conveyor, built in 2009, This Sartorius MDP+ metal detector is mounted on a mobile stainless steel conveyor with a 350 mm wide modular belt. The aperture is 400 × 165 mm (w × h), the belt is 2,060 mm long. The detector is operated from the keypad panel on the detector head; the conveyor has its own control box., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2009-sartorius-mdp-metal-detector/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,060 mm

Conveyorized chamber vacuum packaging machine for industrial food processing, This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vc999-k ...

Prints labels and applies them straight away, This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height., According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/van-oers-lpx-400-print-and-apply-labell er/, Type: Print and apply labeller, Print method: Thermal transfer (ribbon), Application: Blow applicator (air), Construction: On column with conveyor, height adjustable

Labeller that applies a label to the top and the bottom, This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side., It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/top-and-bottom-labelling-machine/, Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Controls: Touchscreen, Construction: Stainless steel frame on adjustable feet

Marel labeller for the top and the bottom of the pack, This Marel labelling machine puts a label on the top and on the bottom of a pack in one pass. Packs come in on the conveyor with adjustable guides; the head above the belt labels the lid and the head below the belt labels the base., It is operated from a touchscreen next to the conveyor. The rating plate is still on the machine, but only the Marel name can be read, so the model and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-top-and-bottom-labelling-machine/ , Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Infeed: Conveyor with adjustable guides, Controls: Touchscreen

Tipper with discharge belt and cross conveyor for the food processing industry, This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away., The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/foodeq-tvb400-4350/, Type: Tipper with discharge belt and cross conveyor, Belts: Blue food-safe  ...

Inclined conveyor for moving product in food processing lines, This Eillert TR-3700-400-425 is an inclined belt conveyor with a stainless steel frame and a blue plastic belt fitted with cleats. It stands on a mobile frame with adjustable feet, allowing the conveyor to be levelled and repositioned on site. The drive runs on 400V three-phase power and is fitted with its own control box with start-stop button. Eillert, based in Ulft in the Netherlands, is known as a manufacturer of processing machinery for the vegetable, fruit and potato sector., Located in Emmeloord, the Netherlands. Immediately available. Asking price: EUR 7,000., More photos and full specifications: stcfoodsolutions.nl/en/machine/eillert-tr-3700-400-425/, Type: Inclined belt conveyor, Belt: Blue plastic belt with cleats, Frame: Stainless steel, mobile, adjustable feet, Power supply: 400 V, three-phase, Controls: Own cont ...

Inclined conveyor for moving product within a food processing line, This conveyor has a stainless steel frame mounted on castors, making it easy to reposition on the work floor. The belt has raised, wave-shaped side skirts on both sides, which keep loose or irregular products on the belt while it runs at an incline. The drive and controls are housed in a compact box fitted to the side of the frame. The open frame design allows for straightforward cleaning, suiting the conveyor for use in a food processing environment., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/opvoerband/, Type: Incline conveyor, Belt: With raised wave-shaped side skirts and cleats, Controls: Compact control box on the frame, Construction: Stainless steel frame on castors, open design

Payload: 2000Kg Hoist: DEMAG Electrically movable trolley / hoist see photos for more details Auction-ID: A7-50868-68

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-486

Manufacturer: Meiko (Offenburg, Germany) Model: M-iQ B-XL94 GB V6 V8 N68 P8 N8 Serial No.: 10589620 / 2024 Year: 2024 (ordered in 2023, delivered/invoiced in July 2024) Length: 22,300 mm | Direction: right to left Application: pin conveyor washing line for reusable food cups, containers and packaging. Configuration: 4,600 mm inlet, pre-wetting, 2 pre-washes (600 + 800 mm), 3 x 800 mm washes, vibration 800 mm, 800 mm rinse, 200 mm dirty/clean separation, drying 1,300 + 600 mm, 500 mm neutral zone, 3 switchable dryers (600 + 600 mm), cooling 2,600 mm, 2,600 mm outlet. Equipment: GiO integrated reverse osmosis unit, stainless steel condenser with energy recovery, CC Insight with Economy and API REST extraction (RJ45), water/electricity meters, 24 supply strips, Waredose 50 dosing unit, safety devices and light/sound signals in/out, 2 additional emergency stops, 3 programs + 1 ...

1T 4m chain length see photos for more details Auction-ID: A7-50868-83

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-485

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-487

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-484

Technical description : 2 UNITS SCRAP CONVEYOR SYSTEMS consisting of: - First unit being approx. 35 meters length - Second unit being approx. 40 meters length - Each having a drive unit, gearbox, reversing station - Conveyor width is approx. 1100mms - Conveyor height is approx. 1200mms. Both units were professionally dismantled, cleaned and stored carefully into containers in our warehouse in D-57258 Freudenberg some 140 km north of Frankfurt International Airport

length in total:1200 mm band width:500 mm conveying height:1200 weight of the machine ca.:1 t dimensions of the machine ca.:4,0 x 1,5 x 2,2 m swarf conveyor with coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

div. Pallet transport Chains/rolls for Düdo pallets and Euro-industry pallets Unit price: from 700,00 € with drive

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

Technical data: Make: Moehringer Width: 1500 mm Length: 1000 mm Roll diameter: 108 mm - With stud rolls - Used to transport parquet friezes Pictures and further information on request

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Timing belt+clamping roller DEUTZ BF4L1011 (=OE 02929933) Net= 67,- Timing belt+clamping roller DEUTZ BF4L2011 (=OE 02931480) Net= 151,- Timing belt F/BF3-4M1008 Net= 50,- Clamping roller F/BF3-4M1008 Net= 76,- all price plus Shipping+VAT info@miw-zeven.de

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange