conveyor roller gravity used for sale

Manufacturer: Sorbini Lackersatzwalze Moosgummi 1300 mm gebraucht muss geschliffen werden, Sorbini: yes, Roller rubber coating: Moosgummi defekt, Rubber coating length cm: 1450, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: ca.210,

Manufacturer: Hymmen, Type: TLX, Year: ca. 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Through running hight mm: Maschine wird gereinigt, geprüft und neu lackiert, Year :ca. 1990

Manufacturer: Valtorta, Type: VF/PF3, Year: ca 1992, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 3 - 100, Working height: 900, UV-laquer roller: yes, Widht of roller coater: 1360, Year :ca 1992

Spare roller: SAL 700, Bürkle: Gegendruckwalze, Rubber coating length cm: 720, Approx. thickness of rubber coating in mm: 5, Stahlkerndurchmesser ca. mm: 176,

Manufacturer: Bürkle 1416 mm shore 55 gebraucht muss geschliffen werden Type: Lack-Ersatzwalzen, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1410, Shore Härte: ca 55, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 180, EPDM: yes, Can be reground: yes, Application roller rubber coating mm: ca 20,

Manufacturer: Bürkle Dosierwalze 1415 mm 174 mm D , Bürkle: yes, Roller rubber coating: no, Rubber coating length cm: 1410, Chromium-plated dosing roller mm: 174,

Manufacturer: Bürkle Ersatzwalze 1416 mm shore 30 prüfen muss geschliffen werden, Bürkle: yes, Roller rubber coating: 30, Rubber coating length cm: 1410, Shore Härte: 25, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 180, Wedge follower: yes, Rubber coating defective: no, Application roller rubber coating mm: ca. 240,

Manufacturer: Giardina 1450 mm 20 shore 25 Gummierung Neu, Spare roller: Ölwalze, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

Manufacturer: Giardina Lackwalze 1450 mm 30 shore gerillt Neu, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Creasing on a 1 cm: gerillt, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Riss,

Manufacturer: Giardina Lackwalze 1450 mm Poore Neu NeuGiardina, Spare roller: Öl Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: schleifen,

Manufacturer: Giardina Lackwalze 1450 mm ca 35 shore muss geschliffen werden, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

Manufacturer: Hymmen, Type: TLX 1,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Year :1982

Manufacturer: Bürkle Walze 1336 mm D= 220 Stahlkern 220, Roller rubber coating: yes, Rubber coating length cm: 1336, Shore Härte: ca 45, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 220,

Ersatzwalze für: TLX, Hymmen: yes, Gummiert Walze: yes, Gummierte Länge cm: 1400, shore Härte: ca.35, Stärke Gummierung ca. mm: 20, Stahkerndurchmesser ca. mm: 215, EPDM: schwarz,

Spare roller: ELX und TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20 Schwarz, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Gummiqualität : neu,

Manufacturer: Bürkle Gegendruckwalze Spachtelmaschine 1400 mm 185 Durchmesser, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 52, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Bürkle Gegendruckwalze SLC 1300 neu Gummiert shore 80, Bürkle: yes, Rubber coating length cm: 1300 mm, Approx. thickness of rubber coating in mm: ca,7 mm, Stahlkerndurchmesser ca. mm: 170,

Manufacturer: Hymmen Stahldosierwalze Chromwalze 1400 mm 197 Durchmesser, Hymmen: yes, Roller rubber coating: Chrom, Approx. thickness of rubber coating in mm: Stahl 1400 mm, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Bürkle Stahldosierwalze 174 mm Länge 1416 mm muss verchromt werden, Bürkle: yes, Stahlkerndurchmesser ca. mm: 174 mm, Total lenght mm: 1416,

Manufacturer: Purete, Type: Doppellackwalze, Year: 2017, Control: Schilin, Program: yes, Work piece width min-max mm: 30-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Working height: 890, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: ca.1,5, Auftragswalzengeschwindigkeit m/min min-max: regelbar, Gummierte Auftragswalze(n): yes, Shore: 40, Double rubber coating: ca.60, Dosierwalze verchromt: yes, Year :2017

Manufacturer: Purete, Type: PRT-R2113AM Doppellackwalze, Year: 2017, Control: Shillin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Conveyor: Band, Einbaulänge UV mm: 2000, Compressed air bar: 6, FREE TEXT: Bilder sind keine Orginal-Fotos Maschine ist nicht benutzt worden, Year :2017

Manufacturer: Hymmen Lackwalze für TLX Länge mm 1400 shore 60 Walze muss geschliffen werden, Spare roller: TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 60, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Rubber coating defective: yes,

Manufacturer: Hymmen Lackauftagswalze, Bürkle: yes, Rubber coating length cm: 1398, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Sponge rubber: yes,

Manufacturer: Bürkle Walzenkern 1415 mm shore 65 gumm 12 mm, Bürkle: yes, Roller rubber coating: yes, Shore Härte: 60, Approx. thickness of rubber coating in mm: 12, Stahlkerndurchmesser ca. mm: 197, EPDM: Poleurethan,

Manufacturer: Hymmen, Type: TLX - M, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Hymmen, Type: TLX-M1, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M1.0, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Bürkle Lackauftragswalze 1416 mm shore 35 gerillt Zustand gut, Spare roller: SLC DAL, Bürkle: yes, Roller rubber coating: yes, Shore Härte: 35, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 189, Creasing on a 1 cm: ca.80, Wedge follower: yes,

Manufacturer: Bürkle Chromwalze beheizbar 1416 mm/184, Spare roller: SLC 1300, Bürkle: yes, Roller rubber coating: no, Shore Härte: ca 60, Total lenght mm: 1416,

Manufacturer: Bürkle Stahldosierwalze 1415 mm 234 Durchmesser, Spare roller: Spachtelwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1300,

Manufacturer: Bürkle SLC Dosierwalze 1416 mm Neu 174 Durcmesser mm Beheizbar, Spare roller: Dosierwalze, Bürkle: Neu, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1416 mm, : SLC, : 174, : Chrom,

Manufacturer: Bürkle Gegendruckwalze 1300 mm 8 mm Gummi shore 80 muss geschliffen werden, Bürkle: JA, Roller rubber coating: yes, Rubber coating length cm: 1300, Shore Härte: ca.80, Stahlkerndurchmesser ca. mm: ca.170,

Manufacturer: Hymmen, Type: TLX M, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hymmen, Type: TLX M2, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hymmen, Type: TLX-M, Year: 1991, Control: yes, Operating side: rechts, Arbeitshöhe: 850, Stain roller: yes, UV-laquer roller: yes, Widht of roller coater: 1350, Widht of metering roller: yes, Attachment bracket roller: yes, Reverseantrieb: yes, Rakeleinrichtung: yes, Werkstückdicke max mm: 80, Work piece length min mm: 250, Feeding speed min/max: 6 - 40, Roller lift out: yes, Hight adjustment by engine: yes, Transportart: Band, Pump system: yes, Compressed air bar: 6, Wight approx. kg: 2000, Required space L x W x H mm: 940 x 2350 x 1600, Year :1991

Roller mill BÜHLER MDDP 1000 x 250 2 x longitudinal corrugations/threads Geared motor, SPB 355-4, Gearbox with timing belt Knife scrapers Good condition

Dematic roller curve right 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 830 Nominal / outside width in mm: 600 Roll width in mm: 540/450 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or ...

We offer roller shells made of chilled cast iron, nodular cast iron and chrome steel. The production is carried out according to your technical requirements and drawings. Of course, the corresponding certificates will be provided.

sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross transport trolley for rails + scissor lift table with castors Brand: WTT Length 3000mm

The roller drum was used as a coater for spraying granules. The drum is designed in V2A and has a length of 2400 mm with an inner diameter of 890 mm. The base was sandblasted and repainted.

sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: Handbetrieben weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 4 mm distance between columns: 2100 mm diameter of upper rolls: 140 mm total power requirement: KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 3,0 mm distance between columns: 1300 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.