conveyor roller gravity used for sale

Mobile Laboratory Equipment Trolley / Instrument Trolley on Casters For sale is a sturdy used equipment truck from company laboratory stock. Suitable for holding laboratory equipment, measuring instruments, analysis equipment, computers, printers or other technical equipment. Equipment: Stable metal construction Large upper device/work surface Pull-out middle shelf Additional lower shelf Height-adjustable shelf 4 swivel castors Lateral hole grid for height adjustment Dimensions approx.: Width: 60 cm Depth: 48 cm Height: 85 cm Condition: Used condition with signs of wear due to age and use. The car is stable and fully usable. Scope of delivery and condition according to pictures. Location: 71254 Ditzingen-Heimerdingen, Germany. Price: 99 € net VB plus VAT Preferably pick-up. Prior sale and errors excepted.

Sweeper roller 1407974 974375 width: 700 mm diameter: Ø 300 mm bristle length: 80 mm Dimensions: 750 x 350 x 350 mm

Roller shutter PAGUS 1500 x 2000 mm Alu !' drive SEW SF47 DT80K4/BMG/1S 0.55 kW 83 rpm 220 / 380 V used, tested !' Dimensions: approx. 1860 x 520 x 190 mm

Auction-ID: A1-49846-111

Scooter ITOH DENKI Power Moller PM570AS-15-300-3-380-UR630A Diameter: Ø 63 mm Length: 300 mm New ! Dimensions: 360 x 70 x 70 mm

Scooter ITOH DENKI Power Moller PM570AS-15-400-3-380 Diameter: Ø 66 mm Length: 400 mm New ! Dimensions: 460 x 80 x 80 mm

Scooter ITOH DENKI Power Moller PMA-15-250-V2 Diameter: Ø 57 mm Length: 250 mm with junction box New ! Dimensions: 310 x 70 x 70 mm

Scooter ITOH DENKI Power Moller PMA - 5 - 250 - 3 - 200 - G Diameter: Ø 63 mm Length: 250 mm Dimensions: 360 x 70 x 70 mm

Assembly station with roller block MKF R 3026 Payload: 2000 kg Roller blocks only screwed on, sockets and pneumatic connection not checked Dimensions: 1760 x 600 x 1000 mm

Scooter ITOH DENKI Power Moller PM 570 AS - 15 - 250 - 3 - 200 - G Diameter: Ø 63 mm Length: 250 mm New ! Dimensions: 310 x 70 x 70 mm

Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.

Motorroller ITOH DENKI Power Moller PM 570 AS - 15 - 200 - 3 - 200 - NR 630 A Diameter: Ø 63 mm Length: 200 mm New ! Dimensions: 260 x 70 x 70 mm

Scooter ITOH DENKI Power Moller PM 570 AS - 15 - 400 - 3 - 380 - UR 700 B - 0S Diameter: Ø 70 mm Length: 400 mm New ! Dimensions: 470 x 80 x 80 mm

HCB roller stir-frying machine, model: RSF-ZGTC-325, serial number: HBO3A2505001, 230 V, 50 Hz, 3.2 kW, capacity: 9 Liter, dimensions: 450 mm x 380 mm x 415 mm.

Auction-ID: A3-46156-2685

Scooter ITOH DENKI Power Moller PM 570 AS - 15 - 250 - 3 - 200 - G Diameter: Ø 63 mm Length: 250 mm Dimensions: 310 x 70 x 70 mm

Laminating roller with heating INKOPLAN 128-1350 roller: Ø 128 x 1340 mm heating: 20-1350-1500 W 1500 W 1350 mm Dimensions: 1600 x 230 x 200 mm

material width:150 mm material thickness:1,5 mm power requirement:3,0 kW no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:4 weight:0,67 t Dimensions (WxDxH):1,3 x 1,1 x 1,6 m

material width:300 mm material thickness:- 3,0 mm no. of straightening rolls:7 Stück straightening roll diameter:60 mm weight:0,8 t Dimensions (WxDxH):0,9 x 1,5 x 1,4 m

Thrust Roller Bearings, Thrust Deep Groove Ball Bearings SKF 591/800M P5 Inner Diameter: Ø 800 mm Outer Diameter: Ø 950 mm Height: 90 mm New ! Dimensions : 1000 x 1000 x 100 mm

Cylindrical Roller Bearing with Inner Ring KOYO 1523FC108787CYCS315FPP6 Inner Diameter: Ø 750 mm Outer Diameter: Ø 1075 mm Width: 400 mm New ! Cylindrical roller bearing dimensions (packaging): 1100 x 1100 x 450 mm Inner ring dimensions (packaging): 970 x 940 x 550 mm

Spherical roller bearing NTN TOYO BEARING 24122 B Inner diameter: Ø 110 mm Outer diameter: Ø 180 mm height: 69 mm New ! Dimensions : 180 x 180 x 70 mm

Cylindrical Roller Bearing with Inner Ring KOYO 1523FC108787CYCS315FPP6 Inner Diameter: Ø 750 mm Outer Diameter: Ø 1075 mm Width: 400 mm New ! Cylindrical roller bearing dimensions (packaging): 1200 x 1170 x 650 mm Inner ring dimensions (packaging): 970 x 940 x 550 mm

Spherical roller bearing NTN TOYO BEARING 24124 BDI Inner diameter: Ø 120 mm Outer diameter: Ø 200 mm height: 80 mm New ! Dimensions : 200 x 200 x 80 mm

Tapered Roller Bearings, Roller Bearings, Ball Bearings TIMKEN 32006XM-90KM1 4 pieces ! inner diameter: Ø 30 mm outer diameter: Ø 55 mm width: 17.5 mm originally packaged !' New !' Dimensions (packaging): 120 x 65 x 65 mm

material width:500 mm material thickness:0,6 - 1,6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 inlet roll diameter:60 mm max. material thickness:2,0 mm material thickness at 150 mm material width:2,0 mm material thickness at 500 mm material width:1,6 mm weight:0,5 t dimensions (WxDxH):0,8 x 1,0 x 1,2 m

material width:300 mm material thickness:0,6 - 2,5 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 diameter of draw-in rolls:60 mm max. material thickness:3,5 mm material thickness at 30 mm material width:3,0 mm material thickness with 300 mm material width:2,5 mm weight:0,3 t Dimensions (WxDxH):0,9 x 1,0 x 1,1 m

Cylindrical Roller Bearing with Inner Ring SKF 312967 DA Inner Ring 312964 / VU001 Inner Diameter: Ø 750 mm Outer Diameter: Ø 1075 mm Width: 400 mm New ! Cylindrical roller bearing dimensions (packaging): 1270 x 1170 x 550 mm Inner ring dimensions (packaging): 1000 x 930 x 550 mm

material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m

ALUKAP350 machine, manufactured in 2012 by K.SCHULTEN GMBH from Germany. The 2012 K. Schulten GmbH AluKap350 is a specialized industrial machine produced by K. Schulten GmbH, a German manufacturer known for its expertise in producing machinery and components for industrial applications, particularly in aluminum processing. The AluKap350 is typically associated with aluminum profile cutting and processing. Machines like this are designed to handle precision cutting and processing of aluminum parts, which are widely used in industries such as construction, automotive, and manufacturing. The model number, 350, might refer to specific technical characteristics, such as the cutting capacity, blade size, or processing capabilities. Key features of a machine like the AluKap350 could include: Precision Cutting: The ability to cut aluminum profiles accurately and efficiently. High Throughput ...

material width:120 mm material thickness:0,4 - 4,0 mm no. of straightening rolls:19 straightening roll diameter:24 mm material cross-cut:120 mm² :40 mm bending speed:5 - 25 m/min weight:0,85 t dimensions (WxDxH):1,2 x 1,7 x 1,6 infinitely variable drive:Stöber

material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m

material width:450 mm material thickness:0,5 - 1,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm power requirement:1,0 kW weight:0,65 t dimensions (WxDxH):1,0 x 1,0 x 1,55 m

material width:200 mm material thickness:0,5 - 3,0 mm no. of straightening rolls:6 straightening roll diameter:70 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm power requirement:3,1 kW weight:1,1 t dimensions (WxDxH):1,5 x 1,2 x 1,9 m

material width:310 mm no. of straightening rolls:5 straightening roll diameter:25 mm dimensions (WxDxH):0,4 x 0,6 x 1,15 m

material width:210 mm no. of straightening rolls:6 straightening roll diameter:40 mm dimensions (WxDxH):0,45 x 0,6 x 1,1 m

material width:250 mm material thickness:0,5 - 4,0 mm no. of straightening rolls:9 straightening roll diameter:60 mm number of draw-in rolls:2 power requirement:3,8 kW Weight:0,8 t Dimensions (WxDxH):1,6 x 0,8 x 1,5 m

material width:600 mm material thickness: - 4,0 mm no. of straightening rolls:21 straightening roll diameter:30 mm material cross-cut:1800 mm² speed:6 - 36 m/min Power capacity:4,5 kW Weight:2,0 t Dimensions (WxDxH):1,5 x 2,0 x 1,9 m

Dematic roller curve right or left 90°-660-590 IR865 RA2322 Make: Dematic Running direction: 90° right running/ left running Roller width (RB): 590 mm conical, plastic coating Nominal/outer width (NB): 660 mm Inner radius (IR): 865 mm 3x 300-500V, 0,37kW Height frame: 132 Height including motor: 275 Gear motor: SEW Conveyor speed: between 0,142 and 1,42 m/s with Optionally available: frequency converter for freely adjustable conveyor speed Supports Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 865 Nominal / outside width in mm: 660 Roll width in mm: 590 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply ...

Dematic roller curve right 90°-500-440 IR795 RA1680 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 795 mm length: 1790mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look for ...

Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will  ...

WITH CUTTING DEVICE S. No.: 98 0044 10

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at machi ...

description: Type of transport chains (pitch): roller, pitch 190mm/140mm roller carriage without motor Nominal width and installation dimensions can be changed propulsion: 0,55 KW motor with brake Usable width: 1170 mm transport size: 2960 x 1888 x 1300 mm Installation dimension: 10400 x 1580 x 650 mm weight (m) [kg]: 1500 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger ...

Manufacturer: Bürkle, Type: Doppelwalze DAL 2, Year: 1992, Work piece width min-max mm: 10 - 1300, Min.-max. workpiece length in mm: 100, Min.-max. workpiece height in mm: 3 - 120, Operating side: rechts, UV-laquer roller: yes, regelbarer Direktantrieb für Auftragswalze: yes , Auftragswalzengeschwindigkeit m/min.: 5 - 30, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Attachment bracket roller: yes, everse drive: yes, rbakel: 1 x, Feeding speed min/max: 5 - 30, Hight adjustment by engine: yes, Pump system: Membrane, Year :1992

Manufacturer: Hymmen Ersatzwalze 1400 mm Muss gummiert werden, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Stahlkerndurchmesser ca. mm: ca 200, Rubber coating defective: yes, Can be reground: no,

Manufacturer: Purete , Type: Einzellackwalze, Year: 2017, Control: Shllin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Operating side: rechts, Working height: 890, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Shore: ca.40, Durchmesser Auftragswalze mm: ca.240, Dosierwalze verchromt: yes, Pump system: Membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: yes, Carriage: yes, Year :2017

Manufacturer: Purete, Type: PRT-R2113AM Doppellackwalze, Year: 2017, Control: Shillin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Conveyor: Band, Einbaulänge UV mm: 2000, Compressed air bar: 6, Year :2017

Manufacturer: Bürkle, Type: DALD 1300, Year: 1990, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Operating side: links, Working height: ca.900, Widht of roller coater: 1350, Widht of metering roller: 1350, Attachment bracket roller: yes, rbakel: no, Work piece thickness max mm: 5, Feeding speed min/max: 5-25, Hight adjustment by engine: no, Year :1990