conveyor press used for sale

Used and untested

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W

Safety distance: 100 mm Run-time travel: 60 msec Table dimensions: approx. 210 x 160 mm incl. installed punching tool

Machine number: 23620678 max. compressive force: 250 kN Largest stroke: 150 mm Drive power: 7.5 kW Operating voltage: 380 V Table dimensions: 570 x 380 mm

Includes 1 set of tools; equipped with steered X axis

Includes: transport box 1230x810x1030mm, various accessories.

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.

Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic

Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

including 1 set of tooling

consisting of various pressing devices and tools

Inner diameter: 220 mm Inner belt width: 200 mm Year of construction 02/90 Load capacity per reel is 150 kg, whereby the reel must be screwed to the ground. Weight approx. 450 kg Incl. wiring diagram

Key data: 200 mm

used press brake Trumpf TruBend V200 + BendMaster 60 Year of construction 2004 Pressing force max: 2000kN Stroke max: 365 mm Operating pressure max:340 bar 1 piece B0401A0009 = BendMaster 60 1 piece B0106A0073 = TRB V200-6A 1 piece of protective housing incl. lighting 1 piece of BendMaster roadway 14 meters in 2 meter segments 1 piece of system control system trump

HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg

Foot control / strip bender / opening 159x77cm

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified

Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused

Brake 2x45 Nm, mounted on AUMANN substructure

Press force: 25 t Throat depth: 190 mm Slide strokes: 80/min Slide displacement: 50 mm Stroke adjustable: 8 - 80 mm Operating voltage: 380 V Connection: 3 hp Table dimensions: 570 x 430 mm

Pressure plate stacker Grafoteam PST 26 C; arm length 650mm; suitable for Heidelberg Suprasetter A52-74; optionally with stop interface for Heidelberg Suprasetter A52-74. Plate stacker Grafoteam PST 26 C; arm lenght 650mm; used for Heidelberg Suprasetter A52-74; for option with stop-interface for Heidelberg Suprasetter A52-74.

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

25,000 LITRE KÖNIG & GÜNTHER STORAGE TANK / SPARKLING WINE PRESSURE TANK / PRESSURE TANK / 8 BAR, WITH AGITATOR PROPELLER, HORIZONTAL, ROUND, MADE OF STEEL https://eurolux.de/product/24-0563euba-25000-liter-konig-gunther-lager tank-sektdrucktank-drucktank-8-bar-mit-ruhrwerkspropeller-liegend-rund -aus-stahl KK UNI-RILL Specifications Cylinder wall thickness 12.3 mm Manufacturer: König & Günther Wall thickness floor 12.6 mm Surface coated on the inside, food-safe Surface painted on the outside Length 7100 mm Volume 25000 L Steel as a material Diameter 2250 mm Cylinder length 6000 mm Operating pressure 8 bar Agitator Propeller Stirrer Horizontal design Last Use Food Technical Documentation Yes Tank crown: 2 crane eyelets Flange connection 50 mm Front (horizontal tanks): Manhole oval Agitator propeller complete champagne pressure fitting wi ...

Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press

52,100 LITRE RIEGER SPARKLING WINE PRESSURE TANK / STORAGE TANK 8 BAR WITH SIDE MIXER, ROUND STANDING MADE OF V2A / SADDLE TANK https://eurolux.de/product/24-0515euba-52100-liter-rieger-sektdrucktan k-lagertank-8-bar-mit-seitlichem-ruhrwerksmixer-rund-stehend-aus-v2a-s atteltank Manufacturer: RIEGER Wall thickness cylinder 11 mm Surface inside 2B=IIIC sanded Surface marbled on the outside Volume 52100 L Material V2A (AISI 304) 1.4301 Total height 8000 mm Cylinder height 5500 mm Diameter 3250 mm Operating pressure 8 bar Working temperature 20 C Agitator Propeller Stirrer Vertical design Number of feet 5 Parts in contact with the product: Yes Last Use Food Technical Documentation Yes AS UNI-RILL 047-500 Topsoil: Klöpperboden 4 crane eyelets downward CIP line DN 50 with flange connection with pressure line DN 25 Tank cylinder: Manhole ovall 35 ...

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Equipped with 10 crimp sets; unused

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.

Machine number: 3-0419 Compressive force: 3 kN Stroke: 50 Table dimensions: approx. 150 x 110 mm

Equipped with 10 crimp sets; unused

Machine number: 473678 Delay time: 69 ms Safety distance for hand control tool: 110 mm Table dimensions: 700 x 525 mm

Dirinler CD/PC 600 H - Eccentric Press - incl. tools & accessories - Built in 1990 Specification - Capacity: 60 t - Stroke rate: 52 rpm - Plunger adjustment: 80 mm - Table dimensions: 750 x 480 mm - Plunger area: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Engine speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Dimensions control cabinet WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg

Pressure capacity: 35,000 kg Plunger strokes: 110 1/min Throat: 220 mm Plunger adjustable: 50 mm Stroke adjustable: 0 - 70 mm Motor power: 3 hp Voltage: 220/380V Table dimensions: 550 x 460 mm