conveyor press used for sale

Roller conveyor, roller track, powered roller conveyor, roller track -stable design -electrically powered -Drive motor: 0.37 kW 76 rpm -Roller width: 850 mm -Conveyor length: 1140 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 960 mm, adjustable -driven: via belt -Number: 5x roller conveyors available -Price: per piece -Dimensions: 1500/1150/H960 mm -Weight: approx. 230 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor -Strap width: 2x 30 mm -Width: adjustable -Conveyor belt length: 1950 mm -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Quantity: 1 piece available -Dimensions: 1950/930/H960 mm -Weight: approx. 100 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor -with pneumatically driven centering unit -with lifting unit -Belt width: 2x 30 mm -Width: adjustable -Conveyor belt length: 2450 mm -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Number: 2 conveyor belts available -Price: per piece -Dimensions: 2450/1380/H1000 mm -Weight: approx. 300 kg

Roller conveyor, roller track, powered roller conveyor, roller track -stable design -electrically powered -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Roller width: 820 mm -Conveyor length: 2450 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 1250 mm adjustable -driven: via belt -Number: 3x roller conveyors available Price: per piece -Dimensions: 2580/1380/H1250 mm -Weight: approx. 230 kg

Transnorm roller curve conveyor 90°-770-700 IR800 Make: Transnorm Type: TS 2712 Year of construction: 1996 Conveying speed V= 0,58 m/sec Conveying angle: 90° Roller width: 600 mm Outer width/nominal width (NB): 680 mm Inner radius: 800 mm Drive chain drive Rollers: plain bearings with conical plastic molded part Transport weight: 130 kg on Euro pallet Transport mast: L x W x H = 1800 x 900 x 450 mm Scope of delivery: without supports (please enquire if required) Optionally available supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running direction: links/ rechts nominal voltage: 380-500V Construction year: 1994 Drive type: Kette condition: very good (used) Nominal / inner radius in mm: 800 Nominal / outside width in mm: 770 Roll width in mm: ...

FlexLink 180° curved conveyor (2 x 90°), belt width 85 mm, working height approx. 900 mm, electrical connection 380 V/59 Hz, dimensions per curved conveyor approx. 1500 x 1000 x 1200 mm (LxWxH), weight per curved conveyor approx. 90 kg

engine: 0,18 kW band length: 4.500 mm band width: 120 mm Infeed conveyor belt, outfeed conveyor belt or connecting conveyor belt Weinig LTB 120/4500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2.000 mm width: 500 mm height: 970 mm Sturdy steel roller table for various applications. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers, curved roller conveyor -Conveyor belt rollers: Transport rollers, carrying rollers, curved roller conveyor, diameter 50/86 mm -Transport width: 575 mm -Wave: Dimensions see photos -Material: Plastic, galvanized steel -Quantity: 41x transport rollers available -Price: per piece -Overall dimensions: Ø 86 x 620 mm -Weight: 1.8 kg/piece

Vacuümhefunit - Type: V01174 - Maximaal hefvermogen bij 60% werkvacuüm: 1650 kg - Gewicht: 700 kg - lengte: 10,3 meter - breedte: 500 mm - hoogte: 950 mm

Auction-ID: A1-45495-320

180 Degree Belt Curve Conveyor, Transnorm, TS 1500 -100 – used - Price ex location: only 2.500.-€ (net) dismantled, packed and loaded! Manufacturer: Transnorm Type: TS 1500 -100 Year of Make: 1997 Nominal width: 700mm Inner radius 500mm Conveyor winch: 180 degrees Belt Type: KT 94 Dimensions: Incl. feet For further dimensions see sketch (measured without the engine) Condition: good Available: immediately Location: Frankenberg warehouse site

Throwing length approx. 2500 mm, width approx. 300 mm, discharge height approx. 720 mm

Mecalux roller conveyorRoller conveyor 1800-540-450 RA1902 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1800 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 24V ITOH-Deki Construction year: 2017 condition: very good (used) Conveying length in mm: 1800 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...

Mecalux roller conveyor roller conveyor 1800-740-650 RA1917 Make: Mecalux Roller width (RB): 650 mm, Steel rolls Nominal/outer width (NB): 740 mm length: 1800 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1800 Nominal / outside width in mm: 740 Roll width in mm: 650 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e ...

A conveyor belt with a cooling tunnel is being sold. Metal chain links. Bj 2022 Width approx. 35cm Band length approx. 235cm Machine dimensions approx. L 265cm W 95cm Price is net VAT Machine can and should be tested on site, as warranty or guarantee is excluded. Loading facilities available Article location Nuremberg

Granule dryer, granule drying system, granule conveyor, vacuum conveyor -Manufacturer: Digicolor, granule conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 930/870/H2880 mm -Transport dimensions: 930/870/H2280 mm -Weight: 141 kg

Stock number: D1236, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Feeding conveyors, Construction: With plastic lamellar conveyors and exit puller, Standing: 4 pcs. legs, Dimensions: L 2000 x W 1000 x H 850 mm., Motor: Variable speed

Total length approx. 2.9 m Incl. footrests Functional Drive 0.18 kW (WEG motor)

Transnorm belt conveyor GF 3250-700-600 RA2470 Technical data: Conveyor length (NL): 3250 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3250 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 scope of delivery: without support ...

Load factor Maxim 75kg/meter, maximum possible tire width 945mm, belt frame is approximately 4 meters extendable, double hydraulic angle adjustment per frame part Auction-ID: A1-42370-27

Strip width 320 mm, consisting of 2 modules with length 2200/2400 mm, belt height 970 mm, on ITEM substructure Auction-ID: A1-45682-18

Consisting of 1x REXROTH Lift Transfer Unit and 1x REXROTH Section Module, roll width 100 mm, inner roller spacing 640 mm, outer roller spacing 850 mm, on ITEM frame, transport dimensions 2000x1200x1250 mm Auction-ID: A1-45682-44

work length 21.56 meters; working height 9.4 meters; conveyor belt length 16.8 meters; transport height 3.3 meters; track width 400 mm; reading hours reading 2979 hours; equipped with receiving hopper; Support legs and 4-cylinder diesel engine Auction-ID: A1-42370-4

Roll width 60 mm, inner roller spacing 730 mm, outer roller spacing 850 mm, load capacity per roll 50 kg, max. load carrier weight 400 kg, on ITEM rack, transport dimensions 1800x1800x1100 Auction-ID: A1-45682-42

Belt width 320 mm, consisting of 2 modules with length 2200/2400 mm, belt height 940 mm, on ITEM substructure Auction-ID: A1-45682-21

: gebraucht : 2014 : 2475 : prompt, Zwischenverkauf v : 200 € : 1 : 1000 mm : 600 - 1000 mm : 800 kg : 40 kg : 360 mm : 60 mm : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Nutek Model: NTM530WSXL-1800-3-AW Year of Manufacture: 2010 Machine length: 1800 mm Belt segments: 3 Maximum PCB width: up to 460 mm (XL size) Maximum PCB length: up to 460 mm (XL size) Voltage: 230 VAC, single phase Power: 250 VA Weight: 190 kg CE Certified Find more here - / Contact us at -

Panel return system for single-sided edging machine in left-hand version with a length of approx. 12m50 Panel length 240 to 2700 mm Panel width 60 to 1000 mm Panel thickness 8 to 80 mm Min/max panel dimensions with 4-sided machining: 240 x 80 mm, 2500 x 1000 mm Working height 950 mm At the machine outlet is a tilting air table that returns the workpieces on a conveyor belt to the machine operator Tilting air table with dimensions 2500 x 1400 mm Air table at the front of the machine inlet with dimensions 720 x 580 mm Brush cleaning of the return belt air table at the end of the return conveyor with dimensions 2500 x 1250 mm

Roller diameter: 90 mm Roller center distance: 155 mm Roller length: 1050 mm Chain motor: 0.75 kW Height: 290 mm Roller conveyor length: 5400 mm

Roller diameter: 90 mm Roller center distance: 155 mm Roller length: 1050 mm Chain motor: 0.75 kW Height: 290 mm Roller conveyor length: 3400 mm

Roller diameter: 90 mm Roller center distance: 155 mm Roller length: 1050 mm Chain motor: 0.75 kW Height: 290 mm Roller conveyor length: 1300 mm

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x 4 perpendicular stop rollers 4 non-driven feed rollers 1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/s Working height 70 cm Electrical cabinet not included

Belt conveyor belts 2 pieces 1x SCHOLZ KMU3500 400, S/N 206 1 1188, 1x SCHOLZ AMN 2000x385, S/N 080070401.0, electromotive, possibly cannibalized

Granulate conveyor accessories various sizes, approx. 5 pcs., pallet

Machine parts granulate conveyor PIOVAN C30E3 year 2015, S/N 50000058132, apparently unused, with hydraulic closing device HILGER & KERN pump 30, year 905

Granulate conveyor PIOVAN C15i

1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.

Transnorm conveyor belt GF 1500-600-500 RA2070 Technical data: Conveyor length (NL): 1500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit  ...

Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 15000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Transnorm conveyor belt GF 1250-600-500 RA2096 Technical data: Conveyor length (NL): 1250mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Belt conveyor belt SCHOLZ AMN 3500x585 approx. 250 cm, 400V 50Hz, S/N 080070404.0, superstructure

Roller conveyor LOGIFORM width approx. 60 cm, length approx. 300 cm, rollable

Compact Conveyor KOCH 608 Bj. 05-12, S/N 32141, 230 V

Scissor roller conveyors GURA approx. 500 cm each 2 pieces

Granulate conveyor WITTMANN M2CM5 built 07.2008, S/N W3137, 1.1 kW, 400W 50Hz, 182 kg

Roller conveyors BLUME-ROLLEN extendable, double track approx. 500 cm

Belt conveyor belt MTF electric motor approx. 3,500x600 mm, rollable

Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor, hinge belt conveyor, scraper belt conveyor -Manufacturer: COMAR, chip conveyor -Type: -Conveyor belt width: 230 mm -Outlet height: 1100 mm -Drive: 0.15 kW / 14 rpm (2.40 m/min) -Individual components: see photos -Dimensions: 720/2630/H1575 mm -Weight: 727 kg

Consisting of Table 2x Vibration metering, type VD4 2x Wenrdel conveyor type BF 40-L 12 4x linea conveyor HLF 25-M-12 Auction-ID: A1-45977-23