conveyor bend used for sale

Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17Ident. No: 0495078 Order No: 915979 year of construction 1992Metal link width 200 mmDistance driver bars approx. 380 mmLength of possible chip removal 1100/2100 mmInsertion length approx. 1350 mmInsertion height 370 mmInsertion width 460 mmHopper width at the top 400 mmHopper width at the bottom 170 mmConveying height - discharge height approx. 1250 mmMotor power belt drive 0.37 kWNetz connection 400 volts, 50 Hz- Drive of the scraper chain via geared motor-

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

Z-conveyor, conveyor belt with metal link belt GÖSSLINGMetall belt conveyor, belt conveyor, floor conveyorMasch. No: 15867 Year of construction 2005Useful length: 3100 mmBelt width: 400 mmFrame profile height: 70 mmInsertion width: 465 mmInsertion length bottom: approx. 1500 mmLength conveyor belt slope: approx. 800 mmLength conveyor belt outlet top: approx. 600 mmHeight offset: approx. 170 mmBelt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mmInsertion height: approx. 1050 to 1270Motor power belt drive: approx. 0.37 kWNet connection 400

Kannegiesser belt conveyor Belt conveyor GF 1000-680-600 RA1302 The Kannegiesser conveyor belt is from 2017 and is in good (used) condition. The belt conveyor has a 400V motor MKM TYPE-1 681.015 with frequency converter to regulate the conveyor speed. The shown supports are included in the delivery. Technical data: conveying length (NL): 1000 mm Framework width (NB): approx 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 685 mm +/- 100 mm Number of support feet: 2 pieces Conveying speed (v m/s): adjustable up and down with frequency converter Drive: Normal Motor Electrical data: 400V / 50Hz / 0,37kW Deflection drum (UT): Ø = 60 mm Belt: 2-layer PVC belt, grey, smooth Year of construction: 09/2017 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with frequency converter 1x emergency stop switch on one side under scaffolding, center 2x light barrier 2x deflection drum cove ...

Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2014 Roll division in mm: 65 scope of delivery: inklusive Frequenzumrichter, without supports KW: 1,5/S1 Electric data: 380-500 Bauhöhe in mm (BH): 250 Roll width in mm: 685 angle: 45° Links Conveying length in mm (NL): 1800, 2500, 3180 Frame width in mm (NB): 700 For individual, professional advice, simply contact us. Simp ...

Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2016 Roll division in mm: 65 scope of delivery: including supports and side guides angle: 30° KW: 1,5/S1 Electric data: 380-500 Conveying length in mm (NL): 3715 Frame width in mm (NB): 1050 Bauhöhe in mm (BH): 250 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you wi ...

Transnorm belt conveyor 800-600-500 RA2041 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 545 mm Motor type: SEW motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,02 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: Supports Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Co ...

TGW alignment conveyor inclined roller conveyor 1750-475-420 RA2406 Make: TGW Year of manufacture: 2012 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Length: 1750 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 130 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 1750 Nominal / outside width in mm: 475 Roll width in mm: 420 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simpl ...

Interroll roller track 2.17m with drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Series: 5600 Width: 410mm Length: 2175mm Pitch: 75mm Load Capacity: 200kg per meter Drive voltage: 400Volt Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Interroll Roller Conveyor 0.99m with Drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Width: 400mm Length: 990mm Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

Transnorm conveyor belt GF 800-600-500 RA2431 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1.42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 1,42 scope of delivery: without supports and s ...

Telescopic Belt Conveyor/Telescopic Conveyor/Conveyor Belt -approx. 22.8 meters length Manufacturer: Caljan Condition: very good, used Model Type: CB4H 7.5/15.3-800 Serial No.: 204279 Year of Make: 2017 Drive: Hydraulic Total length retracted: approx. 7500 mm Total length extended: approx. 22800 mm Total width incl. control cabinet: approx. 1650 mm Total width without control cabinet: approx. 1200 mm Belt width: approx. 800 mm Strap type: smooth Conveying height incl. feet: approx. 970 mm Including control cabinet Circuit diagrams included Internal Article Number: 2026020801 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, b ...

Belt conveyor/ webbing/ conveyor belt approx. 180 linear metres Manufacturer: Trapo AG Condition: Used Year of construction: 2011/ 2012 Drive Type: Belt Total length: approx. 180 meters Total width without motor: approx. 575 mm Total width incl. motor: approx. 700 mm Belt width: approx. 500 mm Strap Type: Smooth/Longitudinal Grooves Frame height: approx. 130/ 90 mm Material: Steel Color: Blue Including SEW motors (0.75 and 1.1 KW): 12 drive units Price per meter Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2025112003 Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Goods are delivered in disassembled condition, belt must be glued on site. Thanks to the excellent workmanship of the conveyor techno ...

Roller conveyor / roller conveyor with drive Condition: Used Model: Drive: Flat Belt Year of Make: 2013 Total length: approx. 33500 mm -consists of 12 parts: 1x approx. 1500 mm, 1x approx. 2000 mm, 10x approx. 3000 mm -result in 4 different systems: 1x 6500 mm, 3x 9000 mm Total width: approx. 650 mm Conveyor width: approx. 595 mm Roll diameter: approx. 50 mm Roller spacing/ center distance: approx. 50mm/ 100mm Material: Steel Frame height: approx. 120 mm Frame depth: approx. 25 mm Colour: green Including SEW motor (0.25 KW) Price per meter Feet to be ordered separately Internal Article Number: 2026021101 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent pa ...

Potveer Belt Conveyor Manufacturer: Potveer b.v Machine No.: 112541 and 112546 Condition: used Year of Make: 2011 1x total length: approx. 8900 mm 1x total length: approx. 9630 mm Total width incl. motor: approx. 1000 mm Total width without motor: approx. 770 mm Belt width: approx. 700 mm Frame height: approx. 85 mm Colour: green Including feet, SEW motor 1.5 KW Stock: 2 pieces Price: per piece Internal Article Number: 2026021901 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your  ...

Belt conveyor / conveyor belt / belt Colour: Light grey Year of Make: 2013 Manufacturer: AMI Fördertechnik Condition: Used Model: Belt/ KGF 65 Total length: approx. 2560 mm Total width incl. motor: approx. 680 mm Total width without motor: approx. 620 mm Belt width: approx. 590 mm Strap Type: Longitudinal Grooves Aluminum frame Frame height: approx. 70 mm Including SEW engine ( 0.37 KW) Stock: 9 pieces Price per piece Internal Article Number: 2026032602 Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloa ...

Conveyor belt / conveyor belt 3 pcs. - Length approx. 9,000 mm - Width: 300 mm ------------------------------------ Conveyor Belt / transportation belt 3 pcs. - Length: approx. 9,000 mm - Width: 600 mm

Conveyor Belt / Conveyor Belt - With blue Clean Drive belt - Length: approx. 5,250 mm - Belt width: approx. 305 mm - With geared motor --------------------------------- Conveyor belt / transportation belt - With blue clean drive belt - Length: approx. 5,250 mm - Belt width: approx. 3005 mm - With gear motor

Conveyor Belt / Conveyor Belt - With blue Clean Drive 2" strap with carriers - Length: approx. 8160 mm to 8360 mm - Belt width: approx. 305 mm - With geared motor ------------------------------------------------------ Conveyor belt / transportation belt - With blue clean drive belt with 2" high catch - Lngth: approx. 8,160 - 8,360 mm - Belt Width: approx. 305 mm - With gear motor

L-Conveyor Belt/Conveyor Belt/Crate Belt/L-Belt - Conveyor width: approx. 300 mm - Horizontal range: approx. 1,400 mm - Sloping area: approx. 4,400 mm - Plastic link belt with adapter ----------------------------------------------------------- L-Conveyor belt / transportation belt - Working widht: approx. 300 mm - Horizontal area: approx. 1,400 mm - Dropping area: approx. 4,400 mm - Plastic link conveyor belt with catch

L-Conveyor Belt/Conveyor Belt/Crate Belt/L-Belt - Conveyor width: approx. 305 mm - Horizontal range: approx. 1,500 mm / 45° - Ascending range: approx. 4,430 mm - Variable speed gearbox - Plastic link belt with 2" high carriers every 300 mm --------------------------------------------------------------- L-Conveyor belt / transportation belt - Working width: approx. 305 mm - Horizontal area: approx. 1,500 mm / 45° Kinking - Rising area: approx. 4,430 mm - Adjustment gear - Plastic link conveyor with 2" high catch all 300 mm

Conveyor Belt / Conveyor Belt - Length approx. 6,500 mm - Belt width: approx. 465 mm -open design - Without side guide - Drum drive - Plastic link belt -------------------------------- Conveyor Belt / transportatio belt - Length: approx. 6,500 mm - Belt width approx. 465 mm - Open execution - Without directional control - Drum drive - Plastic link conveyor belt

Conveyor Belt / Conveyor Belt - Length: approx. 9,220 - 9,320 mm - Belt width: approx. 305 mm - Gear motor - Plastic link belt ----------------------------------- Conveyor belt / transportation belt - Length: approx. 9,220 - 9,320 mm - Belt width: approx. 305 mm -Gear motor - Plastic link conveyor belt

Conveyor Belt / Conveyor Belt - Length: approx. 3,000 - 3,100 mm - Belt width: approx. 305 mm - Gear motor - Plastic link belt ------------------------------ Conveyor belt / transportation belt - Length: approx. 3,000 - 3,100 mm - Belt width: approx. 305 mm - Gear motor - Plastic link conveyor belt

Lippert alignment conveyor inclined roller conveyor 2050-650-530 RA2490 Make: lippert Year of manufacture: Roller width (RB): 530 mm Nominal/outer width (NB): 650 mm Length: 2050 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 2050 Nominal / outside width in mm: 650 Roll width in mm: 530 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simply get in  ...

Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (stock new, 4 x transport belts/belts new). Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Drive-on on 4 x transport rollers with locking levers Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.

Lippert belt conveyor GF 3850-750-600 RA2498 Technical data: Conveying length (NL): 3850 mm Framework width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2005 condition: good (used) Conveying length in mm: 3850 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Ampere: 1,90 Conveyor speed m / s: freely adjustable scope of delivery: without supports  ...

Lippert belt conveyor GF 20000-650-500 RA1407 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 20.000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Belt Conveyor, Webbing, Belt Conveyor Vanderlande 1900 mm Year of Make: 2020 Manufacturer: Vanderlande Model/ Type: Belt Condition: used Total length: approx. 1900 meters Total width incl. motor: approx. 1500 mm Belt width/conveyor width: approx. 1000 mm Material: Steel Colour: blue Frame height: approx. 300 mm Including SEW motor 1.1 KW Including side guide The conveyor technology ran until dismantling. Internal Article Number: 2026071902 Submission of an offer only with a valid imprint, sale only to commercial customers! Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy t ...

NN conveyor belt Mobile conveyor belt with control, stainless steel frame, plastic mesh belt, belt width: 290 mm, overall dimensions: 1800 mm x 900 mm x 1400 mm.

SIM feeding technology package – round conveyor + conveyor belt + controls (YOC 2020) Complete SIM feeding technology package, consisting of round conveyor, conveyor belt and the original SIM control and power units. Technical data: 1) Round conveyor / vibratory spiral conveyor Manufacturer: SIM, Heiligenstadt Type: SF 300 Serial No.: 2008418/5 Year of construction : 2020 Oscillation rate: 3000 min⁻¹ Supply: 230 V / 50 Hz / 630 VA Bowl diameter: approx. 500 mm With integrated separation and sorting line 2) Conveyor belt Manufacturer: SIM Industrial conveyor belt for parts transfer Incl. motor, belt, sensors and brackets 3) SIM control and power units Control unit round conveyor (amplitude adjustable) Control unit conveyor belt (speed adjustable) SIM Type: BB-05-C Serial No.: 2008418/9 230 V / 50 Hz / 7.2 VA SIM mains/control unit: RGB-BL2 230 V AC → 24 V / 3 A Auction-ID: A7- ...

Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 09/2010 Condition: used, functionally stored, technically complete, clear signs of wear System consisting of: 1. Large sorting/spiral conveyor pot (stainless steel) Diameter approx. 40 cm Multi-stage spiral conveyor Pneumatic separation units installed Sensors and air nozzles available Oscillating drive Sortimat / RNA design Acoustic insulation inside complete 3. Small parts sorting pot (third pot) Diameter approx. 14–16 cm Fine parts processing (e.g. pins, clips, contact parts) Precisely adjustable bunker feed and sensors 4. Linear sections / transfer units Several linear conveyors with stainless steel guides 5. Stainless steel bunker / parts storage Large stainless steel filling trough (\"bunker\") Dimensions approx. 30 × 20 cm 6. Control units Sortimat control units type SMS  ...

Curved tape

curved belt conveyor curved belt 109° right Transnorm TS1500-100 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 109° right TS 1500-100 belt bend conveyors Year of construction: 1999 Angle: 109° Direction: Right Nominal radius RN: 600 mm BN width: 600 mm Speed: v = 1.0 m/s Strap type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: Lxwxh = 2.4 x 1.10 x 0.40 m Weight: 150 kg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung ...

curved belt 60° right Transnorm TS1500-80 Built in 2007 Direction: right Width: 500 mm Inner radius: 600 mm with guiding systems inside and out Drive location: outside pulling constant speed v = 0.75 m/sec. incl. 3 supports Features: Construction year: 2007 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 0,75 scope of delivery: including side guides, including support with three feet Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralo ...

curved belt conveyor curved belt 30° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 30° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 30° Direction: Right Nominal radius/radius of indoor RN: 1630 mm BN width: 510 mm Total width: 640 mm Drive location: outside pulling installed power: 0.37 kW constant conveyor speed: v = 0.9 m/sec. Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 900 x 800 x 700 Weight (gross): 90 kg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 1630 Nominal / outside width in mm: 640 Belt width in mm: 510 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,90 scope of delivery: without supports and si ...

curved belt conveyor curved belt 45° right Transnorm TS1500-80 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 45° right TS 1500-80 belt bend conveyors Year of construction: 2008 Angle: 45° Direction: Right Nominal radius/radius of indoor RN: 2480 mm BN width: 700 mm Drive location: outside pulling installed power: 0.37 kW Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: L x W x H = 1800 x 1100 x 600 Weight (gross): 120 kg Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 2480 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung ...

Technical details: RA1025 Manufacturer: Caljan Type: belt curve 60° CC 080 XBK 641 / 054 Year of construction: 2008 Angle: 60° Direction: Left Nominal radius: approx. 600 mm Width: 500 mm Conveyor speed: v = 17 m / min v = 0.28 m / sec Top height cheek: 860 mm + 200 adjustment Strap type: E12/2 UO/U6S GSTR C black Number: 1 x (article no. 20140027) Condition: Used / fully functional Color: Blue (RAL 5002) More information: incl. 2 supports Gear motor Manufacturer: Lenze Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: LEFT Engine type: Lenze Getriebemotor Conveyor speed m / s: 0,28 scope of delivery: including supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir  ...

Transnorm curved belt Conveyor 45° links 670-500 IR1100 RA1083 The Transnorm curved belt is from 2017. It is as good as new (used) and fully functional. It has an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. curved belts are often used in intralogistics for in-house transport of piece goods and are indispensable for modern distribution centers. Transnorm curved belts convince with performance and reliability. Long operating times are no problem thanks to a low-voltage drive over the entire belt width. Conical drums and a specially developed belt guidance system ensure maximum smooth running. Technical data: Manufacturer: Transnorm Type: TS 1600-105 FH2 curved belt 45° links Built: 2017 Condition: as good as new (used) Engine: fully functional Angle: 45° Running direction: left Inner radius (IR): 1100 mm Nominal/out ...

Transnorm curved belt conveyor right bend 45°-800-700 IR900 RA2140 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adjusta ...

Transnorm curved belt conveyor right 90°-800-600-IR600 RA2162 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in  ...

Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2116 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of ...

Transnorm curved belt conveyor right bend 90°-800-700 IR900 RA2118 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,29 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: without support ...

Auction-ID: A1-48986-28

Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive ...

Transnorm curved belt conveyor left bend 45°-800-700 IR900 RA2145 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adjustab ...

Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data: Frame width (NB): 900 mm Frame width with Bearing cover: 950mm Frame width with Bearing cover and Motor: 1250 mm belt width (GuB): 800 mm height (BH): 250 mm Inner radius (IR): 900 mm Conveying angle: 45° degrees conveying speed (v m/s): 0,42-1,50 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2022 Height Sideguides: 200 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2022 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 950 Belt width in mm: 800 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: including side guid ...

Transnorm belt curve conveyor left GKF 90°-600-400-IR1000 - NEW RA2307 Technical data: Frame width (NB): 600 mm Frame width with Bearing cover and motor: 850 mm belt width (GuB): 400 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 1000 mm Conveying angle: 90° degrees Conveying speed (v m/s): 1,0m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 400 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: 1,0 scope of ...