135,551 used machines on RESALE, but how to find them? Machine Search
GASPARINI electronic folding machine mod. PSG-250/5000 FP FEATURES Axes: R – X – Y1 – Y2 , Z1 , Z2 Folding length: 5,100 mm Pitch between uprights: 4,555 mm Strength: 250 tons. Gooseneck: 465 mm Slide travel: 250 mm Distance between table-slide: 450 mm Control unit: delem Weight: 25,500 kg. Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year rebuilt: 2021 CE compliant. PROMECAN pneumatic tie-down. Self-centered lower table with pneumatic tie-down. 1,000 mm motorized backgauge ("X" axle) Height adjustment "R" axis 250 mm. CNC DELEM DA 66W. 4 adjustable motorized turrets Z1, Z2. Folded penetration (axis "Y1, Y2") Low voltage electric pedal operation. Emergency stoppages. Hydrodynamic anti-bending table by hydraulic pumping. Side protections. Level IV safety laser.
sheet width: 3100 mm plate thickness: 9 mm pre-bending: 6 mm diameter of upper rolls: 220 mm diameter of lower rolls: 200 mm side roll diameter: 170 mm min. dia.: 250 mm roll speed: 6 m/min total power requirement: 10,3 kW weight of the machine ca.: 4651 kg dimensions of the machine ca.: 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics ...
tube diameter: 50 mm bending angle max. +/-: 180 ° bending radius max.: 350 mm bending speed: 3 U/min motor speeds:: 2815 U/min bending radius max.: 350 mm bending angle max. +/-: 180 ° tool taper: Sechskant 40 mm total power requirement: 2,2 kW weight of the machine ca.: 0,1 t Machine Type Electric Bending Machine Model 6000-S Power Connection 3-phase 400 V Control System JUTEC electronic, programmable bending control with display and membrane keypad Operation Foot switch for clockwise/counterclockwise rotation and bending operation Design Mobile machine on swivel casters The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: ca. 60 mm tool taper: Sechskant 40 mm bending device: horizontal bending speed: 3 U/min weight of the machine ca.: 120 kg total power requirement: 2,2 kW Electronic bend angle control Digital display and keypad Operated via dual foot switches Mandrel-less bending Mobile machine base Pipe diameter range likely up to Ø 60 mm Tool mounting via hexagonal shank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2026 : 080248 : November 2026, Zwischenve : Türkei : 92932 € : 1756.41 € : 175 to : 3050 mm : Y1 / Y2 / X und R-Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...
sheet width: 2040 mm plate thickness: 6,0 mm distance between columns: 2100 mm roll diam. toproll: 180 mm roll diam. bottom roll: 160 mm total power requirement: KW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Working length: 1270 mm Roller Ø: 120 mm Max. sheet thickness: 4.5 mm Sheet thickness at bending: 4 mm electr. Connection: 400 V, 2.2 kW Weight: 1250 kg Space requirement: 2300 x 800 x 1100 mm
plate width: 370 mm plate thickness: 3 mm no. of straightening rolls: 12 roll diameter: 62 mm Roller diameter 60 mm Workable strip thickness from 0.6 to 3.00 mm Roller configuration: 2+9+2 tempered and ground Double input and output drive rollers pressed by 2+2 pneumatic cylinders Infeed and outfeed belt guide with 4 self-centering rollers Hydraulic opening of the head for pilot release. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Description Fully automated robotic press brake bending cell manufactured by AMADA , model ASTRO II 100 NT / HDS 1030 . Designed for automated sheet-metal bending with robotic workpiece loading, positioning, manipulation and unloading. The system combines an AMADA HDS 1030 press brake with the ASTRO 100 NT robotic handling system. Technical Details Manufacturer: AMADA Model: ASTRO II 100 NT / HDS 1030 Machine type: Robotic press brake bending cell Year: 2007 Serial number: 20306066 Press capacity: 100 t / approx. 980 kN Bending length: Approx. 3,000–3,110 mm Distance between uprights: 2,700 mm Stroke: 200 mm Throat depth: 415 mm Control: AMADA AMNC PC / AMNC II generation Robot: Yaskawa Motoman YR-HP20-A63 / ASTRO 100 NT system Robot payload: 20 kg Robot manufacture: November 2007 Automatic workpiece loading and handling Automatic multi-stage bending Automa ...
Key data: 130 t, 3000 mm
Sell a well-preserved CNC Hydraulic Press Brake from Trumpf Model V130. The dimensions of the machine are LxWxH 1900mm x 3800mm x 2950mm. The weight is about 13000kg. The edge length is 3000mm. Incl. a set of tools. If you have any further questions, please contact us. The machine can be viewed under power by prior appointment. The sale is without guarantee and warranty. Returns are excluded. All information without guarantee.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 17850 € : 342.72 € : 1 : 100 to : 1000 mm : 300 mm : 7.5 kW : 2110 mm : 1000 mm : 2275 mm : 1900 kg : 1 : 680 mm : 1020 mm : 5 mm/s : 10 mm/s : 6 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls BLM VGP 3D TECHNICAL SPECIFICATION Max. diameter of tube: 40 mm Max. wall thickness: 2 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 4500 mm space requirements -front/back-: 2150 mm total height: 1800 mm total weight approx.: 4800 kg Loadingstation AL42 max. 2300 mm, min. 500 mm, 150 kg
Stock No.: 4040 PROFILE BENDING MACHINE Manufacturer: ROUNDO, Type: R5 Serial No.: -, Year of manufacture: 1974 Specifications: Upper roller 360 mm Ø Lower roller 360 mm Ø Flat steel 250 x 30 mm Frame steel upright 100 + 140 x 30 dia. 1000 mm Angle steel 120 x 12 mm U-steel UNP 20 mm Load by steel 40 Kg/mm2 48 cm3 Total performance 7.5 Hydraulic. Dimensions: Length: 1700 mm, Height: 1200 mm, Width: 1500 mm, Weight: 3800 kg
Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical d ...
new
: neu : 2024 : 9741 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
JUTEC 3000 Bending Machine -Year of construction 2021 -CE marking -Footswitch Dimensions: LxWxH 0.7x0.5x1.3 meters / Weight 200Kg
new
: neu : ca. 2 Wochen ab Auftragse : Türkei : 153986 € : 1867.32 € : 98800 € : 320 to : 3050 mm : 365 mm : 2600 mm : 750 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 37 kW SPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYE Tandem preparation Projection 750 mm Light barrier for single or later tandam operation 6 axis back gauge X1, X2, R1, R2, Z1, Z2 CNC CONTROL SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet ...
sheet width: 3200 mm plate thickness: 4.0 mm ST distance between columns: 3300 mm upper clamping bar adjustment: 400 mm Adjustment folding beam: 80.0 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN rear stop: 10.0 - 1600 mm oil volume: 160 Liter total power requirement: 9.8 kW weight: 8500 kg range L-W-H: ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition () - inspected condition - machine video - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC DNC 80 PP swiveling control panel, front right 2D graphic display for visualization and multi-simulation 2D graphic programming easy operation - CNC motorized backgauge travel range 10.0 - 1,600 mm pneumatic / retractable gauge fingers adjustment speed max. 250 mm/sec. rear sheet support table with brushes - motorized lower beam ...
\"Bending Resistance Tester MESSMER BÜCHEL Bending Resistance Tester 79-25-00-0002 Year of manufacture: 2018, Inv. no.: 98235\" Auction-ID: A1-50608-128
Tube bending machine, Macri Provar, max diam 45 Auction-ID: A1-50595-60
Ford Bronco Sport Big Bend 1.5 EcoBoost AWD Year of manufacture / first registration: 05/2024 Mileage read: approx. 64,791 km VIN: 3FMCR9B69RRE78628 1.5 litre EcoBoost petrol engine Power: 135 kW / 184 hp 3-cylinder engine Automatic transmission AWD / 4x4 all-wheel drive 5-door SUV 5 seats Color: Black USA documents: Salvage Title Big Bend Amenities SYNC infotainment system with touchscreen Navigation system Wireless Apple CarPlay Rear view camera ACC / adaptive cruise control as specified Lane Keeping Assist G.O.A.T. riding modes Automatic climate control Heated front seats Heated multifunction steering wheel Electronic parking brake Start/stop system Keyless Start / Start Button Rear parking aid LED headlights Roof rails Alloy wheels Fabric interior Vehicle is visually overall in a well-maintained used condition Signs of wear and tear due to age and milea ...
Serial No.: 81090 Type: 3-roller hydraulic bending machine for tubes and profiles Engine power: 5.5 kW (machine plate) Power supply: 400 V Frequency: 50 Hz Number of rollers driven: 3 Shaft diameter: approx. 80 mm Diameter of standard rollers: approx. 245 mm Bending speed: approx. 4.2 m/min Use: horizontal or vertical work Control: remote control panel Manufacture: Turkey CE marking Indicative weight: approx. 1.5 to 1.6 tons depending on configuration. Visible accessories The machine is accompanied by a large set of bending tools: several sets of rollers/dies of different diameters as well as guides and supports. The two visible boxes seem to be part of the package. Auction-ID: A3-46133-35235
CONTROLS conventional WORKING RANGE (BENDING) plate thickness rolling (max.): 6.3 mm length of straight piece (prebending): 2000 mm ELECTRICAL SPECIFICATIONS total power consumption: 9 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 3800 mm space requirements -front/back-: 850 mm total height: 1750 mm total weight approx.: 3700 kg Technology for the production of tanks, mixers, cylindrical vessels, welding technologies... MACHINERY FOR TANK PRODUCTION -Sheet metal rolling machine, length 2 meters, Jelšingrad 2000/6.3mm with the option of rolling pipes and profiles at the end of the rollers. –Roller lines for assembly and welding of shells and dish ends with automatic movement, complete set of driven rollers –Welding device for automatic longitudinal welding of shells VARSTROJ - Fronius, length 2 m with welding power source –Machine for di ...
Lg.Nr. 26254 Technical data: - Max. working width 1310 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 2250 x H 1250 x D 450 mm - Weight approx. 620 kg
MEBUSA KM 50/25 SY hydraulic bending machine. Nominal bending force: 50 t.Folding length: 2,500 mm.Equipped with 2 axes and numerical control. Hydraulic drive. Pedal drive. Main motor power: 4 kW. Machine refurbished in 2022 by AXIAL MACHINERY. During the refurbishment, new hydraulic tie-downs were installed. According to the information provided, the machine was in good working order as of 13/11/2024. Total weight and dimensions of the machine not verified. It is recommended to confirm the weight and dimensions before organising transport. Possibility of loading onto a truck by overhead crane available on the premises. Condition and content as shown in the photographs. Auction-ID: A7-49809-9
STILCRAM ORM sheet metal bending cylinder 1070x110. 3-roller machine. Working length: approx. 1,070 mm.Maximum sheet thickness: 4 mm.Diameter of the upper roller: approx. 110 mm.Motor power: 2.2 kW. Electrical connection: 380 V.Year: 2022. Approximate dimensions (L x W x H): 2,250 x 800 x 1,100 mm.Approximate weight: 850 kg.The dimensions and weight indicated are approximate values and should be considered as a guideline. According to the information provided, the machine has very few hours of use and all maintenance has been carried out. According to the seller, the machine was in good working order as of 13/11/2024. Possibility of loading onto a truck by overhead crane available on the premises. Condition and content as shown in the photographs. Auction-ID: A7-49809-10
CONTROLS CNC controls BLM VGP 3D TECHNICAL SPECIFICATION Max. diameter of tube: 28 mm Max. wall thickness: 1.5 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 3400 mm space requirements -front/back-: 1100 mm total height: 1500 mm total weight approx.: 1850 kg Stainless steel max. 20 mm diameter CNC control with VGP 3D software
sheet width: 2050 mm plate thickness: 10.0 mm ST pre-bending: 8.0 mm ST diameter of upper rolls: ~ 220 mm side roll diameter: ~ 170 mm diameter of lower rolls: ~ 190 mm bending speed: ca. 2.0 + 5.0 m/min Control: ELAP LYNX oil volume: 80.0 Liter voltage: 380 V total power requirement: 5.5 kW weight: 5000 kg range L-W-H: 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit ELAP LYNX Operation – control of all rolls and machine axes Digital position display Manual operation via joysticks Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending o ...
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to : 500 mm : 6.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 6000 mm : 3000 mm : 43000 kg : horizontal verschiebbar : 2550 mm : 2200 mm : 4600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to : 500 mm : 5.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 5000 mm : 3000 mm : 32000 kg : horizontal verschiebbar : 2550 mm : 1.700 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
: neu : ca. 4 Monate ab Auftragse : Italien : 258000 € : 400 to : 500 mm : 5.000 x 3.050 mm : 700 mm : 20 mm/s : 2 mm/s : 4500 mm : 5000 mm : 2600 mm : 24000 kg : horizontal verschiebbar : 3050 mm : 2.200 mm : 3.600 mm Horizontal verschiebbarer Zylinder2.200 mm Hydraulisch beweglicher Ständer: 3.600 mm Bedienung über Handhebel sowie Bedienpanel Tisch mit integriertem Zylinder zum anheben des Werkstücks Ausrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH (Symbolfoto) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 218000 € : 400 to : 500 mm : 4.000 x 2.550 mm : 700 mm : 20 mm/s : 2 mm/s : 4000 mm : 4000 mm : 2600 mm : 20500 kg : horizontal verschiebbar : 2550 mm : 1.800 mm : 2.900 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of ...
: neu : ca. 4 Monate ab Auftragse : Italien : 190000 € : 3591 € : 300 to : 500 mm : 5.000 x 3.050 mm : 700 mm : 20 mm/s : 2 mm/s : 4000 mm : 5000 mm : 2600 mm : 18000 kg : horizontal verschiebbar : 3050 mm : 2.200 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...
: neu : ca. 4 Monate ab Auftragse : Italien : 135000 € : 2551.5 € : 300 to : 500 mm : 3.000 x 2.050 mm : 700 mm : 20 mm/s : 2 mm/s : 3100 mm : 3000 mm : 2600 mm : 11500 kg : horizontal verschiebbar : 2050 mm : 1300 mm : 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...
: neu : ca. 4 Monate ab Auftragse : Italien : 107000 € : 2022.3 € : 200 to : 500 mm : 3.000 x 2.550 mm : 800 mm : 20 mm/s : 2 mm/s : 3550 mm : 3000 mm : 2600 mm : 8500 kg : horizontal verschiebbar : 2550 mm : 1900 mm : 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...
: neu : ca. 4 Monate ab Auftragse : Italien : 80000 € : 1512 € : 200 to : 500 mm : 2.000 x 1.550 mm : 800 mm : 20 mm/s : 2 mm/s : 2400 mm : 2000 mm : 2600 mm : 4800 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solut ...
: neu : ca. 4 Monate ab Auftragse : Italien : 66700 € : 1260.63 € : 150 to : 500 mm : 1.550 x 2.000 mm : 800 mm : 20 mm/s : 3 mm/s : 2350 mm : 2000 mm : 2500 mm : 4100 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...
: neu : ca. 4 Monate ab Auftragse : Italien : 22900 € : 439.68 € : 40 to : 500 mm : 700x500 mm : 600 mm : 26 mm/s : 9 mm/s : 4 kW : 1400 mm : 900 mm : 2200 mm : 1300 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 25000 € : 480 € : 70 to : 500 mm : 700x500 mm : 600 mm : 25 mm/s : 5 mm/s : 4 kW : 1400 mm : 900 mm : 2250 mm : 1900 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 31400 € : 599.74 € : 100 to : 500 mm : 800x600 mm : 615 mm : 26 mm/s : 4 mm/s : 4 kW : 1600 mm : 900 mm : 2300 mm : 3100 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 43200 € : 825.12 € : 150 to : 500 mm : 800x600 mm : 630 mm : 22 mm/s : 3 mm/s : 4 kW : 1800 mm : 1200 mm : 2400 mm : 4500 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 55200 € : 1043.28 € : 200 to : 500 mm : 1000x600 mm : 640 mm : 21 mm/s : 2 mm/s : 5.5 kW : 1800 mm : 1300 mm : 2500 mm : 6400 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 1020 mm plate thickness: 4 mm pre-bending: - diameter of upper rolls: 110 mm total power requirement: 2,2 kW weight of the machine ca.: 900 Kg dimensions of the machine ca.: 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Foot pedal, interchangeable jigs, spacing between jigs adjustable Auction-ID: A1-50476-124
Offer 26338 Technical data: - max. Working length 3340 mm - Column passage 2600 mm - Max. pressing force 100 t - Projection 400 mm - Max. stroke 100 mm - max. Installation height 370 mm - Table height approx. 960 mm - Feed speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 9.5 kW - Space requirement approx. W 3500 x H 2350 x D 1950 mm - Weight approx. 6.8 t - with: - CNC control DELEM DA 58 - Back gauge 0 - 600 mm
used
Used rotor straightener without bending device Manufacturer: Progress Type: MSR 20/6 Year of Make: 2015 For diameter: 8,10,12,14,16,20mm Used rotor straightening machine without bending device Manufacturer: Progress Type: MSR 20/6 Year of manufacture: 2015 For diameters: 8, 10, 12, 14, 16, 20 mm
maximum number of results exceeded
please refine your search
20.000 € 
