conveyor belt used for sale

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 5.4 m -Transport dimensions: Ø 150 x 600 mm -Weight: 6.7 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg

TGW belt conveyor belt transfer GF 3520-490-360 RA2034 Technical data: Conveying length (NL): 3520 mm Framework width (NB): 490 mm belt width (GuB): 360 mm height (BH): 115 mm, 330 with Motor support feet: optionally available Conveying speed (v m/s): no Motor at the moment, contact us with your needed conveying speed Drive: SEW gear motor Electrical data: 50Hz V380-500, kW dipends on the Speed Year of construction: 2012 Optionally available: Frequency converter Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2012 condition: good (used) Conveying length in mm: 3520 Nominal / outside width in mm: 490 Belt width in mm: 360 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Conveyor speed m / s: bitte Kontaktieren scope of delivery: mit Motor, without supports and  ...

Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Good day We hereby offer you a used sliding belt conveyor belt, type ITE/P50, from the manufacturer Schunk Fördertechnik GmbH, built in 2003. The centre distance is 2300 mm, the belt width 790 mm. The drive is provided by a geared motor with drive chain. Machine documentation is no longer available. We would be pleased if this conveyor belt is interesting for you. Your service team Mertens & Frowein GmbH

Transnorm curved belt conveyor right 160°-780-600-IR600 RA2018 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: broken belt Motor: will be changed conveying angle: 160° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 160° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 scope of del ...

Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 condition: Ausstellungsstück Conveying length in mm: 2100 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: Nord KW: 1,1/S1 Conveyor speed m / s: 2 scope of delivery: without supports and side guides For indi ...

in use for white cabbage,, Transport of the salted cabbage to the fermentation tanks,, length: approx. 18,000 mm,, width: approx. 600 mm,, with catwalk, length: approx. 18,000 mm,, width: approx. 600 mm,

Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 3000 Nominal / outside w ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt -Manufacturer: IMEC, conveyor belt conveyor belt housing VA with adjustable guide rails -Type: ST 340X2000 -Speed: Drive shaft 290 rpm -Conveyor belt rollers: Ø21 x 340 mm -Conveyor belt length: 2000 mm -Drive: ABB 0.37 kW -Total dimensions: 2010/500/H980 mm -Weight: 85 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 2 rollers -Type: VICO FLEX-127-274-14-SF -Material: AISI 304 -Width: 457 mm -Length: 10 m / 17.56 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 1200/800/H740 mm -Total weight: 113 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel -Type: VICO FLEX -Width: 455 mm -Length: 9700 mm -Number: 3 rolls available -Price/Distribution: per roll -Transport dimensions: 600/370/H370 mm -Weight: 62 kg/unit

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 1 roll -Type: VICO FLEX -Width: 457 mm -Length: 18.29 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 800/457/H630 mm -Weight: 75 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 4 rollers -Type: VICO FLEX -Width: 460 mm -Length: 10 m / 8.170 m / 8.830 m / 10.5 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: -Total weight: 225 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 3 rollers -Type: VICO FLEX -Width: 455 mm -Length: 5 m / 8.930 m / 12.860 m -Height: 10 mm -Submission/Price: complete -Transport dimensions: 1200/800/H420 mm -Total weight: 150 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 3 rollers -Type: VICO FLEX -Width: 1065 mm -Length: 25 m / 16.62 m / 25.14 m, Weight: 370 kg / 246 kg / 372 kg -Height: 15 mm -Submission/Price: complete -Transport dimensions: 2350/1265/H940 mm -Total weight: 1100 kg

Foerder band rolls, rollers for foerder tape or roller conveyor Ball bearings for heavy loads. GST roll 133.0mm/20mm pipe length 1.150mm GUP 88.9/20mm/750/756/782/SW14/13 Roller load 750 Clamping 756mm Diameter approx. 89 to 133mm, various lashings, partly coated with rubber. Steel carrying roller / Foerderband rollers / Roller conveyor rollers According to photos; Unused Special price

Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Belt conveyor / conveyor belt / belt Manufacturer: VanderLande Condition: Used Year of Make: 2008 Total length: approx. 900 mm Total width incl. motor: approx. 850 mm Belt width: approx. 600 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: approx. 170 mm Colour: Light grey SEW motor included Stock: 11 pieces Price per piece Internal Article Number: 2026031201 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your go ...

Properties: Cjt9y9ndu0 Condition: fully functional, with traces of use Color: Orange Material: Steel Ideal for fast material transport Expertly dismantled and packed Specifications: Dimensions of the belt conveyor Total length extended: 9820 mm Total length retracted: 4350 mm Conveying length: 9400 mm Total width incl. control cabinet: 1600 mm Total width without control cabinet: 1200 mm Conveying width/ belt width: 785 mm Type of strap: smooth Height incl. motor: 260mm Net weight: 5000 kg Conveying height incl. feet: 820 mm Drive: Motor Motor included Control cabinet included Telescopic belt conveyors Due to the excellent workmanship of the roller conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading you ...

Schäfer roller conveyor complete system Super bargain for self-dismantling in Neuss Logistics center with all conveyor belts, roller conveyors and spare parts. Over 3 floors Year of construction: 2008 The Schäfer roller conveyor system is a state-of-the-art conveyor system that has been specially developed for the efficient and precise movement of goods and products over several floors. With its robust design and intelligent control, the system offers a reliable and flexible solution for in-house transport in production facilities, logistics centers and warehouses. The roller conveyor system consists of a series of roller conveyors arranged horizontally and vertically to ensure seamless movement of goods between different levels. Through the use of individually adjustable rollers and different types of conveyor belts, the system can be adapted to the specific requirements o ...

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 14 m/min -Conveyor belt: 2800 x 345 mm -Drive: SEW-Eurodrive 0.37 kW -Total dimensions: 3000/970/H320 mm -Weight: 176 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 11 m/min -Conveyor belt: 1375 x 400 mm -Drive: North 0.55 kW -Total dimensions: 1640/1060/H260 mm -Weight: 168 kg

Conveyor Belt / Conveyor different lengths, different widths, Condition: as it is or made to order

Conveyor belt/accumulation conveyor with belt flap: - With 3 own drives - With 3 waiting positions - With its own control system - Length 600 + 600 + 800 mm = 2 m total - Max. speed 90 m/min. (adjustable via frequency converter) - Max. load 25kg/m - Max. stacking height 500 mm Application/Functionality: - Allows you to quickly traverse production lines without having to walk around them or climb over them with a ladder. Conveyor belt holds when belt flap is lifted. - If the following machine is occupied, the bundles/packages are stopped at three consecutive waiting positions until they are released by the following machine. - Contacts for release signal from upstream and downstream machine with plug connection 24V

Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (new bearing, 4 x new transport belts/belts, etc.) Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) Documentation: Operating instructions, spare parts catalogue and electrical diagram available If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.

Transport with incline conveyor straight line length 8100 mm with incline conveyor length 1900 mm Currently conveys to a height of 1050 mm, but can be adjusted in pitch. Conveyor belt width 520 mm Total width 900 mm

Sliding Belt Magnetic Conveyor, Magnetic Slide Conveyor GÖSSLING Z-Conveyor, Sliding Belt System, Conveyor Belt, Magnetic Belt ConveyorMasch. No: 21113628 02 / 2053405 60 Year of construction 2002 / 2016 overhauledSlide width 255 mmDistance of permanent magnets 270 mmInsertion length approx. 1000 mmInsertion height 200 mmSlide-in width 390 mmConveying height - discharge height approx. 1000 mmConveying speed approx. 15 meters/min. Motor power belt drive approx. 0.55 kWNe-connection 400 volts, 50 Hz- Circulating chain equipped with permanent magnets- Overall height

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

Interroll roller track 2.17m with drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Series: 5600 Width: 410mm Length: 2175mm Pitch: 75mm Load Capacity: 200kg per meter Drive voltage: 400Volt Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Interroll Roller Conveyor 0.99m with Drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Width: 400mm Length: 990mm Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Telescopic Belt Conveyor/Telescopic Conveyor/Conveyor Belt -approx. 22.8 meters length Manufacturer: Caljan Condition: very good, used Model Type: CB4H 7.5/15.3-800 Serial No.: 204279 Year of Make: 2017 Drive: Hydraulic Total length retracted: approx. 7500 mm Total length extended: approx. 22800 mm Total width incl. control cabinet: approx. 1650 mm Total width without control cabinet: approx. 1200 mm Belt width: approx. 800 mm Strap type: smooth Conveying height incl. feet: approx. 970 mm Including control cabinet Circuit diagrams included Internal Article Number: 2026020801 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, b ...

Roller conveyor / roller conveyor with drive Condition: Used Model: Drive: Flat Belt Year of Make: 2013 Total length: approx. 33500 mm -consists of 12 parts: 1x approx. 1500 mm, 1x approx. 2000 mm, 10x approx. 3000 mm -result in 4 different systems: 1x 6500 mm, 3x 9000 mm Total width: approx. 650 mm Conveyor width: approx. 595 mm Roll diameter: approx. 50 mm Roller spacing/ center distance: approx. 50mm/ 100mm Material: Steel Frame height: approx. 120 mm Frame depth: approx. 25 mm Colour: green Including SEW motor (0.25 KW) Price per meter Feet to be ordered separately Internal Article Number: 2026021101 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent pa ...

Belt conveyor / conveyor belt / belt Colour: Light grey Year of Make: 2013 Manufacturer: AMI Fördertechnik Condition: Used Model: Belt/ KGF 65 Total length: approx. 2560 mm Total width incl. motor: approx. 680 mm Total width without motor: approx. 620 mm Belt width: approx. 590 mm Strap Type: Longitudinal Grooves Aluminum frame Frame height: approx. 70 mm Including SEW engine ( 0.37 KW) Stock: 9 pieces Price per piece Internal Article Number: 2026032602 Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloa ...

properties: Used pallet roller conveyor from the manufacturer Bito Condition: Top condition with slight signs of use Color: gray Specialist dismantled and packaged Stock 177meters Price per meter Technical Data Plant consists of 73 segments 63 segments x 2.495mm 10 segments x 1.990mm Total width: 880 mm Conveyor width: 870 mm Axle distance: 95 mm Roller cross-section: 60 mm Material: steel, galvanized Height frame: 110 mm There are 3-4 brake rollers per segment. Roll diameter: 80mm pallet roller conveyor Due to the excellent workmanship of the pallet roller conveyor, your material glides gently to the destination, even under heavy loads. Tailor-made tickets for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to  ...

Properties: Used roller conveyor from the manufacturer Overbeck Feet to order separately Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Drive: Gravity Price per meter Stock approx. 12 meters Technical data: Total quantity in stock: approx. 12 meters Segment length: 3,000mm Total width: 710 mm Conveyor width: 640 mm Diameter approx.: 50 mm Axle spacing: 100 mm, adjustable Material: steel, galvanized Height: 140 mm Roller track The roller conveyor is ideal in the picking zone for interlocking machines or work places and to optimize the internal flow. During transport, the roller conveyor can feed sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or betwe ...

properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Color: Red 6 pieces in stock Price per piece Technical Data: Manufacturer: Budde Built: 09/11 Model: TGF02 hydraulic height-adjustable Total length retracted: 5,000 mm Total length extended: 11,500 mm Total width incl. control cabinet approx.: 1.240mm Total width: 950mm Belt width: 600mm Condition: good (used) Belt type: Smooth 4 pieces: built in 2008 2 pieces: built 2009 telescopic belt conveyor The telescopic belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal flow. During transport, the telescopic belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed or ...

properties: Used roller conveyor Condition: Top condition with slight signs of use Material: Steel (galvanized) Color: blue Specialist dismantled and packaged 8 meters in stock Price per meter Technical Data Dimensions of pallet roller conveyor approx. Plant consists of 4 segments Total length: 8,000mm Segment length:2,000 mm Total width: 510 mm Conveyor width: 440 mm Axle distance: 100 mm Roller cross-section: 50 mm Material: steel, galvanized Height frame: 70 mm roller conveyor The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line before or between pr ...

properties: Used roller conveyor from the manufacturer Overbeck Very stable design Incl. SEW motor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Plant consists of 49m Optional: Side guide Price per meter SPecs: Dimensions of the roller conveyor Storage roller conveyor with drive approx. 49 meters Total width approx.: 510 mm Conveyor width: 440mm Axis spacing: approx. 100 mm (adjustable) Drive type: Flat belt / lashing belt Material: steel, galvanized Profile Height: 140mm Colour: Blue roller conveyor The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the fee ...

Properties: Used pallet roller coaster Condition: Condition with slight signs of wear Material: Steel (galvanized) Professionally dismantled and packed 400m stock Price per meter Technical data Pallet roller coaster of the manufacturer Euroroll The plant consists of 160 segments 150 segments: 2,495mm 10 segments: 2.445mm Stock approx. 400 meters Total width: 950mm Delivery width: 855mm Wheelbase: 155mm Roller cross-section: 60mm Material: Steel, galvanized Profile: 75/40mm There are two brake rollers per segment Roll diameter: 80mm Pallet roller coaster Due to the excellent workmanship of the pallet roller web, your material glides gently to the destination, even under high load. Ske solutions for your intralogistics For roller conveyors, web belts, inclined conveyors or telescopes for loading and unloading your goods, we are your com ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor with drive/conveyor conveyor Manufacturer: interroll Condition: Good (Used) Drive Type: Vertical Shaft approx. 42 linear metres available Plant consists of 14 segments -of which 6 are drive units (SEW motor (0.37 KW) Segment data Total width: approx. 535 mm Conveying width: approx. 455 mm Roll diameter: approx. 50 mm Wheelbase: approx. 75 mm Aluminum frame Frame height: approx. 120 mm Frame width: approx. 40 mm The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, incl ...

Step conveyors, step lift conveyors KÖBERLEIN & SEIGERT Type A 400 / 2000Feeding technology, feeding system, incline conveyors, inclined conveyors, steep conveyorsFabr. No.03-3964 Year of construction 2003Slide width 400 mmSlide thickness 40 mmConveyor stages 10 piecesTransfer height on the incline conveyor 2200 mmTransfer height on the side of the feeder 1800 mmFilling height 750 mmConveying slope 75Motor power 1.5 kWMotor speed 1450 rpm. Mains connection 400 volts, 50 Hz- Low-wear sliders- Electromechanical drive-

Roller conveyor curve 90 degrees Condition: Used Model: Rollers Type: 90 degrees Total width outside: approx. 1840 mm Total width inside: approx. 1080 mm Width incl. motor: approx. 630 mm Conveyor width: approx. 500 mm Roller spacing: approx. 100 mm Wheelbase: approx. 60 mm Plastic castors Material: Steel, Plastic, Aluminum Color: Light Gray, Black SEW motor included Stock: 2 pieces Price per piece Internal Article Number: 2026032601 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent p ...

Roller conveyor curve 90 degrees Condition: Used Model: Rollers Type: 90 degrees Total width outside: approx. 1840 mm Total width inside: approx. 1080 mm Width incl. motor: approx. 630 mm Conveyor width: approx. 500 mm Roller spacing: approx. 100 mm Wheelbase: approx. 60 mm Plastic castors Material: Steel, Plastic, Aluminum Color: Light Gray, Black SEW motor included Stock: 2 pieces Price per piece Internal Article Number: 2026032601 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent p ...

Rexroth Belt Bunker Nominal volume: approx. 50 litres Conveyor belt: 1000 x 400 mm Bunker tray: stainless steel Frame construction: aluminium profile Mobile on wheels Engine Type: MS56A/4 0.09 kW Length: 1300 mm Width: 620 mm Height 1190 mm More items - new and used - can be found in our shop! International shipping costs on request!

Pallet stacker / de-stacker, plastic belt, belt width: 800 mm, total dimensions: 1850 mm x 1550 mm x 2000 mm.

Roller or belt conveyors shifting lengths approx. 25 m

Band conveyor 14 cm wide - 2.00 m long use as a stack table behind filling arrangements possibly nevertheless, height of the stack level (normally 0.75m) is changeable on 0.95 m. the band conveyor can be put about a Poti in the speed.