conveyor belt used for sale

Flat belt pulley, toothed pulley, multi-belt pulley -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Key data: 1100 , 2 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

Key data: 1350 , 3 , 160

Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines

Key data: 950 , 1 , 160

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

Key data: 1100 , 1 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

Key data: 1350 , 2 , 160

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version

MAX TRUNK DIAMETER 700 MM SUBSTRUCTURE LENGTH 6000 MM CUTTING LENGTH OF 4.8 METERS 5.5 KW MOTOR HYDRAULIC BELT TENSIONING

Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused

Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - Working width 1150 -Volt. 380/50 - S/N 951121/DR3 - Year 1996

Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t

TECHNICAL SPECIFICATIONS Designation: Discharge belt Version: stationary Axle distance: 6,000 mm Belt width: 1,200 mm Year of construction: 2006 Drive power: 15 kW Drive type: Plug-on gear motor Support: free supporting structure Catwalk: not available Handover: Transfer hood Belt tension: Tensioning carriage Galvanized version: yes SPECIFIC COMMENT - Exhaust conveyor belt with close upper belt stations - No trough angle / straight load flow

V-belt pulley, belt pulley -Diameter: 508 mm -Total width: 120 mm -Straps: 6 -V-belt width: 17 mm -Socket: Ø 59 mm -Pulley: balanced -Weight: 46 kg -other pulleys: in stock

Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.

Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (by Glasmek AB Sweden, renovated in 2005) Manufacture: Ashton Industrial Sales LTD / UK Year of manufacture approx. 2000 Professional high-performance glass grinding machine 2x diamond bracelet transverse straps High-speed abrasives and diamond abrasives 400 V , 50 Hz Ball roller tables for easy movement of the glass panes. Table dimensions: L x W x H = 3.85m x 1.20m x 0.9m Weight 600 kg CE marked

Weibert WBBS 555 profi Log band saw The log band saw is intended exclusively for sawing soft, hard, dry and frozen materials, logs or prismatic workpieces. Their length depends on the design of the machine. The material is laid on the supports of the railway path and fastened. The sawing unit is fed manually. Max. trunk diameter 555mm Max. board width 530mm Max. saw blade stroke 540mm Min saw band stroke 20mm Max. cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Impeller-D: 400mm Wheel width: 25mm Saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed. 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-555 Optional: Extension section 2.3m Aspirator Swivel bar

Band saw JAESPA AS8 Blade length 5300 - 5500 mm Width 34 mm 16 A 380 V Length 1.50 m Width 1 m Height 2.50 m Tiltable table Speed indicator

SPECIFICATIONS: Installed power: 5.5 kW 2 flywheels Ø 450 mm Sanding belt length: 4900 mm 2 speed settings

V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm -Weight: 17kg

Technical data (subject to change) Space requirement 4,200 x 2,600 mm Tape measure 7,800 x 150 mm Table size 2,900 x 1,400 mm usable working length between the uprights max. 2700 mm Table lift by means of handwheel 340 mm Offset right 1100 mm Weight approx. 1300 kg (Compressed air connection required)

1.Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, clamping station manual, drive approx. 11 kW, with scraper, 2 level monitors, Hopper and transfer hopper built in 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW 3. Screw conveyor 3 x 500 mm, motors 3 x 7.5 kW

Gearbox, spur gear, angle gear, reduction gear -Reversing gearbox -Translation: 2 :1 -Drive shaft pulley: 17 mm Ø 105/145/185 mm -Output shaft pulley: 13 mm Ø 120 mm -Dimensions: 540/190/H210 mm -Weight: 28.8 kg

Key data: 1300 mm, 5

Wide belt snding machine Manufacturer: Heesmann Model: LSM 8 Equipment: - Transverse sanding unit - Longitudinal sanding unit - Longitudinal sanding unit - Brush unit - Brush unit

V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

Weibert BS-500 Wood band saw Cutting height 450mm Swivel -15° + 45° Motor power: 5KW, 400V, 50HZ Band length 4670mm Suction nozzle 2 x 100mm Saw blade width 6 to 40mm Cutting width left 490mm CE marking WJ-X00200

V-belt pulley, belt pulley -Diameter: 322 mm -Total width: 185 mm -Straps: 8 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Number: 2x pulleys available -Price: per piece -Weight: 38 kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 450 mm -Total width: 130 mm -Straps: 6 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 48 kg -other pulleys in stock

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Diameter: 507mm -Total width: 158 mm -Strap: 8 -V-belt width: 17 mm -Taper socket recording: Ø 70 mm (can be changed) -Pelt: balanced -Weight: 61kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 570 mm -Total width: 237 mm -Straps: 9 -V-belt width: 22 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 127 kg -other pulleys in stock

V-belt pulley, pulley -Diameter: 460 mm -Overall width: 278 mm -Belts: 10 -V-belt width: 22 mm -Hole: Ø 95 mm -Pulley: balanced -Weight: 144 kg -other pulleys in stock

Toothed belt pulley, slewing ring, -Toothed belt pulley: with drive shaft -Pulley: Ø approx. 63 mm -Belt width: 15 mm -Shaft: Ø 19 x 19 mm / Ø 20 x 38 mm -Measurements: see photos -Dimensions: Ø 66 x 77 mm -Weight: 0.5 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley Ø 243 mm -V-belt width: 17 mm -Taper socket recording: Ø 30 mm (can be changed) -Dimensions: Ø 243 x 30 mm -Weight: 5kg

V-belt pulley, pulley -V-belt pulley: single-groove pulley Ø 125 mm -V-belt width: 13 mm -Receptacle: Ø 24 x 32 mm -Quantity: 7x pulleys available -Price per piece -Dimensions: Ø 130 x 32 mm -Weight: 0.7 kg/pc.

V-belt pulley, pulley -V-belt pulley: single-groove pulley Ø 125 mm -V-belt width: 13 mm -Receptacle: Ø 30 x 32 mm -Quantity: 4x pulleys available -Price per piece -Dimensions: Ø 130 x 32 mm -Weight: 0.7 kg/pc.

V-belt pulley, belt pulley -V-belt pulley: pulley 5 grooves Ø 157 mm - V-belt width: 17 mm -Intake: Ø 42 mm -Number: 1x pulley available -Dimension: Ø 157 x 114 mm -Weight: 8.1 kg

Grinding wheel, surface grinder, grinding belt, wide belt -Manufacturer: VSM, Wide belt sanding strip 1350 x 2620 mm 2 pieces -Type: SMA Form E13 Series KP510E -Grain size: 180 -Price/Fee: complete -Carton dimensions: 1480/260/H330 mm -Weight: 5.3 kg

V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -V-belt pulley: 4-groove pulley 280/4 -V-belt width: 17 mm -Taper bushing mount: Ø 65 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 287 x 82 mm -Weight: 14.4 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 250/4 -V-belt width: 17 mm -Receptacle: Ø 100 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 260 x 82 mm -Weight: 5.8kg

V-belt pulley, belt pulley -V-belt pulley: pulley 1 grooved 200/1 with bearing - V-belt width: 17 mm -Intake: Ø 45 mm -Number: 1x pulley available -Dimension: Ø 186 x 32 mm -Weight: 5.5kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 3-groove pulley 250/4 -V-belt width: 17 mm -Taper bushing mount: Ø 100/107 x 52 mm (can be replaced) -Dimensions: Ø 257 x 65 mm -Weight: 11 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves -V-belt width: 17 mm -Intake: Ø65 x 65 mm -Dimension: Ø257 x 80 mm -Weight: 10.5kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 5 grooves -V-belt width: 17 mm -Intake: Ø38 x 90 mm -Dimension: Ø250 x 135 mm -Weight: 18.3 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 7 grooves -V-belt width: 17 mm -Intake: Ø69 mm -Dimension: Ø330 x 140 mm -Weight: 29 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves -V-belt width: 17 mm -Intake: Ø65 mm -Dimension: Ø290 x 82 mm -Weight: 15 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 14 grooves -V-belt width: 22 mm -Intake: Ø110 x 250 mm -Dimension: Ø325 x 365 mm -Weight: 88 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 10 grooves -V-belt width: 17 mm -Taper bushing recording: Ø 114 x 126 mm (can be changed) -Dimension: Ø290 x 195 mm -Weight: 31kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 9 grooves -V-belt width: 22 mm -Intake: Ø130 mm -Dimension: Ø365 x 240 mm -Weight: 52 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 9 grooves -V-belt width: 22 mm -Taper socket recording: Ø 95 mm (can be changed) -Dimension: Ø365 x 240 mm -Weight: 66kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 8 grooves SPC 300 8 -V-belt width: 22 mm -Receptacle: Ø132/145 mm for taper clamping bush TB 4040 (can be changed) -Dimensions: Ø300 x 215 mm -Weight: 44 kg