conveyor belt used for sale

Drive for conveyor chain of an Eisenmann paint shop New consisting of: 2 pcs drive unit 1600 x 360 x 520 mm 5 Pcs Replacement Chains ( 4 Pcs. Packed) Drive pinion: 10 teeth Chain sprocket: 10 teeth Driver width: 3 cm Chain link length: 130 mm Auction-ID: A1-50529-36

1x 200x70 cm, 1x 200x37 cm. Including parts. Auction-ID: A1-50090-46

roll diameter 60 mm; roll length 500 mm; including pallet box; Auction-ID: A1-44050-252

Op maat gemaakte, zware kraan, ideaal voor lage gebouwen, maar ook om de maximale hijshoogte binnen het gebouw maximaal te benutten.nbsp;Dit komt doordat de twee takels tussen de twee hoofdbalken zijn geplaatst (in plaats van erbovenop te rijden). Kind of: overhead travelling crane Capacity: 16 + 16 ton Span: 22 000 mm Drop: 8 meter Tackle speed: 0,6 > 4 m/min Weight: 26 ton Radiocontrol: radio control

Driven roller conveyor Length 3100 mm A total of 16 rolls Of which 14 are powered Diameter 80 mm Roll length 600 mm Working height 920 mm Feed speed 14 m/min. Motor power 0.55 kW Mobile on castors Dimensions 3400 mm x 740 mm x H 1050 mm Weight approx. 350 kg (Previously stood in front of four-sided planer copper mill)

Auction-ID: A1-50076-576

Approx. 30m consisting of 7x straight roller conveyor, 3x 90 degree bend, 3x supply channel, 3 x swivel module, 8x individual motor, 1x cross belt transfer unit, 1x control box Auction-ID: A1-50566-1004

Band width: approx 85 cm. In the current set-up consisting of 5 lanes, estimated at 1 x +- 26 meters, 1 x +- 23 meters, 1 x +-6 meters, 1 x +-7 meters, 1 x +-12 meters, in transit and elevator with standing profiles up to +- 470 cm height. Including drive motors, excluding control system. Conveyor belt installation is built in between site 1002 and site 1003. Pick-up by appointment. Auction-ID: A1-50566-1001

electrically driven, roll width: approx. 60 cm, approx. 15 meters fully stretched length, shortest length approx. 530 cm, equipped with connector. Auction-ID: A1-50566-1013

Estimated approx. 290m1, working width: approx. 50 cm, set-up divided over: 4x 90 degree bend, 12x conveyor belt section, 10x sorting/dividing section, 3x cross belt transfer unit, 15x drive motor, 14x control station, driven roller conveyors. Including control cabinets, without platform (lot 1002) and conveyor belt setup (lot 1001). Auction-ID: A1-50566-1003

Auction-ID: A1-50076-577

electrically driven, roll width: approx. 60 cm, approx. 15 meters fully stretched length, shortest length approx. 530 cm, equipped with connector. Auction-ID: A1-50566-1014

Kaltenbach KKS 400 cold circular saw – Ø400 mm – hydraulic – including 2 roller conveyors Specifications: Brand: Kaltenbach Type: KKS 400 Serial Number: 53096 Version: semi-automatic cold circular saw / metal circular saw Maximum saw blade diameter: Ø400 mm Sawing principle: saw blade moving from bottom to top Cutting capacity 90° round: approx. Ø130 mm Square cutting capacity: approx. 120 × 120 mm Cutting capacity flat material: approx. 305 × 20 mm Machine weight: indicatively approx. 850–900 kg, excluding roller conveyors Roller conveyor 1: approx. 3,600 × 480 × 925 mm Roller conveyor 2: approx. 2,500 × 300 × 960 mm Features: Hydraulically controlled and adjustable saw feed Hydraulic material clamping Heavy Duty Vertical Clamping Device Swivel table saw for straight and mitre cuts Left and right miter setting Control panel with saw and mate ...

2018 Kronen KUJ cube, strip and slice cutting machine – used, Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing., This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/kronen-kuj-2/, Machine type: Cube, strip and slice cutting machine, Condition: Used, Cutting types: Cubes, strips and slices, Infeed: Inclined cleate ...

Gravity Roller Conveyors – 3 pcs. Lot 118 comprising three used non-powered roller conveyor sections with galvanized steel rollers, blue steel side frames and adjustable support legs with floor mounting plates. Suitable for manual or gravity transfer of panels, boards and other flat workpieces. Quantity: 3 sections Operation: Gravity operated Condition: Used Approximate dimensions per section: 3,000 × 800 × 1,000 mm Approximate weight: 100 kg per section All descriptions are indicative only. Auction-ID: A1-50546-118

Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-50729-13

Height: 6 m Additional information: Never use Auction-ID: A1-50704-404

Sortimat Spiral Conveyor / Feeding System Manufacturer: Sortimat Technology GmbH & Co.Machine No.: 0000F20756 / 0000F20759 Year of Construction: 2010 Condition: Used, functional from ongoing production, visually with signs of use Complete Sortimat spiral conveyor with stainless steel bowl (Ø 40 cm) Linear conveyor (rail) with adjustable feed intensity Base frame made of stable steel frame Control units Sortimat (frequency controller for pot and Rail) Various pneumatic and sensor cables available Completely assembled feed line with several guides Technical data: Type spiral conveyor (pot): n.b.Type linear conveyor / rail: Sortimat SML 40/300 Diameter spiral conveyor: approx. 39–40 cm Width of sorting magazine / rail: approx. 80 cm Total length of system: approx. 120 cm Total width of system: approx. 70 cm Total height of system: approx. 160 cm Electrical connection: Spiral Conve ...

Sorting and feeding station with double spiral conveyors Complete feeding and sorting station consisting of two spiral conveyors (Sortimat), each with stainless steel bunker attachment, internal insulation and a downstream separation and transfer system. The system was used in an industrial assembly line for parts feeding. The unit stands on a stable steel frame (painted blue). Each spiral conveyor has its own control units (Sortimat), consisting of: Bunker controller Spiral conveyor controller Rail/vibrator regulator All controllers are individually adjustable. Technical data: Length: approx. 210 cm Width: approx. 180 cm Total height: approx. 145 cm Auction-ID: A7-50729-29

Automated feeding and assembly system with vibratory conveyors (mirrored, double) Automated feeding and assembly system, consisting of two identical, mirrored lines. All essential assemblies are available in 2 parts. Manufacturer / Components (excerpt): Vibratory conveyor technology: AViTEQ Vibrationstechnik GmbH Type: KFO 7-1-SIM, year of construction 2019, 230 V / 50 Hz Vibratory conveyors / controls: SIM round conveyor type SF 500, year of construction 2020, 230 V / 50 Hz Various SIM control units (bunkers, round conveyors, conveyor belt) Equipment / construction: 2 × round vibratory conveyors (Ø approx. 500 mm) 2 × bunker systems 2 × conveyor belts Linear feeding lines Pneumatic separation and transfers Aluminium profile frame Central control with SIM controllers System mirrored (left/right identical)Condition : Used, system comes from industrial use Technical data: Size: ap ...

length in total:1200 mm band width:500 mm conveying height:1200 weight of the machine ca.:1 t dimensions of the machine ca.:4,0 x 1,5 x 2,2 m swarf conveyor with coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

Timing belt+clamping roller DEUTZ BF4L1011 (=OE 02929933) Net= 67,- Timing belt+clamping roller DEUTZ BF4L2011 (=OE 02931480) Net= 151,- Timing belt F/BF3-4M1008 Net= 50,- Clamping roller F/BF3-4M1008 Net= 76,- all price plus Shipping+VAT info@miw-zeven.de

Fabric grinding belts of M3 1260 mm x 13 mm P150 for metalworking

MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven

Packing table with conveyor belt! Aluminium frame work surface made of stainless steel Overall length 2, 20m Working height 0, 90 m Conveyor speed can be adjusted You will find more machines and accessories below: abc://abc.resale.de/angebotelinkd-user.php?myid=35837 & dealer = 1 & order = 1 & or abc://abc.resale.de/angebotelinkd-user.php?myid=35846 & dealer = 1 & order = 1 &

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

HBS 433 Band saw Motor: 1.5 KW / 400 V Cutting height: 270 mm Cutting width: 410 mm Roll diameter 430 mm Precision roller Guide Band length: 3345 mm Table inclination 10 °-+ 45 ° Weight: 130kg G & pieces 5154303

Rated power up to 300 kg/h engine power Drive motor 0.37 (0.5) Washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1280 mm width 870 mm He he 1350 mm 65 mm width 350 mm Band length 4900 mm application width 240 mm Application shoehe 0-50 (infinite) mm Weight 350 kg Material 1.4301 / AISI 304 Juice yield up to 75% Band speed 2 m/min Contact time 1 min Water consumption for cleaning 2 l/ min Connection for waste water 48.3mm Connection for juice drain 1 High juice drain 420 mm High sewage drain 120 mm Hoehe marc ejection 700 mm ; New machine - best condition

Technical data: To 800Liter juice/STD (for apples) weight approx. 650 kg and 500mm power band width easy cleaning of the machine of EU funding possible state: as good as new

Rated power up to 3000 kg/h engine power Drive motor 2.2 (3.0) Washing machine motor 0.37 (0.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3035 mm width 2080 mm He he 1690 mm Width 1200 mm Band length 9950 mm application width 900 mm application shoehe 0-65 (5 steps) mm Weight 2500 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.5-3.5 m/min Contact time 2-11 min Water consumption for Cleaning 6 l/min Connection for waste water 76.1mm Connection for juice drain 11.2 High-gasning 400 mm High-speed wastewater drain 250 mm Hoehe marc ejection 880 mm Supplied high-pressure cleaner, compressor ; New machine - best condition

Technical data: Fruit 750 mm tape speed press power up to 1500 kg / hour yield to 75% bandwidth continuously adjustable incl. Incl. air compressor high pressure cleaner Condition: new

Rated power up to 1500 kg/h engine power drive motor 0.55 (0.75) washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2538 mm width 1463 mm He 1460 mm mm width 650 mm Band length 8120 mm application width 450 mm application shoehe 0-50 (infinite) mm Weight 1060 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.9 - 1.8 m/min Contact time 1.9 - 3.8 min Water consumption for cleaning 3 l/min Connection for waste water 75mm Connection for juice drain 2 High juice drain 400 mm Hoehe wastewater drain 210 mm Hoehe marc ejection 840 mm Supplied high pressure cleaner, compressor ; New machine - best condition

Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm

According to the description below

MADO Selekta bandsaw

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

MADO Perfekta-plus MKB 649 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...

Kolbe K 220 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...

Binding press, completely made of stainless steel (frame & all rollers) Bandwidth 1450mm, L x W x H: 4450 x 2100 x 2450mm. Processing capacity with apples approx. 4-6 t/h. Year of construction 1994 Other fruits, berries and vegetables are also possible. No compressed air needed! No complex control necessary! Belt tension by means of 2 pcs. 5t. crank winches and 2 steel springs Very little trub in the juice because no shear effect of 2 bands! Rotary brush & 2 rotary high-pressure nozzles for belt cleaning. This press is an improved replica of an (Amos Compact cover press, see Prospeckt from Amos) in contrast to the Amos press, all rollers in our press are completely made of stainless steel and with continuous shaft (not only shaft stumps) as well as in the interior again amplifier discs to significantly increase the stability of the rollers. The rollers lurk on plain bearings t ...

Kolbe K 300 band saw, stand-alone-version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Made in 1995 in Denmark. Machine No. 9585037. Made in 1995 Transport dimensions: 1800x620x2000 mm. Weight: 400 kg

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Belt Rounder BR-300 XL - Exhibition machine, brand new condition, year of manufacture: 2022 - working range 180 - 2.500 g, moulding length 3000 mm, capacity range up to 2.400 pieces per hour, suitable for soft wheat -, wheat-mixed -, rye-mixed -, and rye doughs, with two motors (one for each belt), frequency inverter for stepless speed control, angle of inclination of the belts can be adjusted, movable lower frame made from stainless steel, machine covers and electrical box made from stainless steel, electric flour duster (mounted on the inlet) with photocell-control

Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg

M. No.: 85.1097

Dear customers currently we offer you a used tape saw with sliding table of the brand HEMA. Here are the technical data of the machine: Roll diameter: 700mm Cutting height: 650mm Cutting width: 680mm Cutting width between stop and saw blade: approx. 630mm Power: 3 kW Sliding table that can be moved on both sides left half of the table: 650mm right half of the table: 1.400mm Table length: 1.800mm Sliding travel: 1.500mm Particularities: Infinitely variable speed control for cutting speeds and automatic table feed are unfortunately not possible due to the lack of PLC control unit. However, the saw can be used completely manually. Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg

capacity 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ \" inside connection for washing bath 2 \" outside mash discharge height 1 480 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen ; new machine - top condition