conveyor belt used for sale

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 3000 mm Roller conveyor width: 600 mm : kg Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 3000 mm Roller conveyor width: 600 mm : kg Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 3000 mm Roller conveyor width: 600 mm : kg Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 800 kg height adjustment: 650 - 950 mm weight of the machine ca.: 0,045 t dimensions: 2,07 x 0,48 x 0,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral conveyor from Apollo, infeed at approx. 6.42m / discharge at approx. 1.09m, approx. 40cm wide conveyor line – used -: Ex-site price (net): only 5.950.-€, dismantled, packed and loaded! Manufacturer: Apollo Type: SPC 1500-400-A4-6T Year of Make: 2016 Width of the conveyor belt: approx. 40cm Height of the point where the conveyor system enters above: approx. 6.42m Height at the sluice: approx. 1.09m Diameter spiral: approx. 2m SPC 1500-400-A4-6T Chain length (m) 37.5m Serial No. 562044-100 230/400V / 50 Hz, 2.2 kW Speed (at Min): 40m/ min IP54 Load 6.4kg/m Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony

Roller conveyor curves/ 90 degree curves -motorized Year of Make: 2016 Manufacturer: Soco System Condition: Used Model: Castors with drive Type: 90 Degree Curve Total width outside: approx. 2000 mm Total width inside: approx. 230 mm Total width incl. motor: approx. 1000 mm Total width without motor: approx. 830 mm Conveyor width: approx. 810 mm Roll width: approx. 610 mm Inner radius: approx. 600 mm Material: Steel/ Plastic Color: Galvanized/ Black/ Blue Including 2 motors Soco System (0.12 KW) Including side guide outside: approx. 190 mm high Includes 2 feet (height adjustable) Stock: 4 pieces Price per piece Internal Article Number: 2026021102 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your ...

Triple flour-collecting screw conveyor in steel design Total length 6.2 m, outlet at 5.2 m Screw diameter 150 mm 1 m counter-rotating thread, slope 105 cleaning flaps, Wooden lid with folding boxes, 2 intermediate bearings each, motor 1.5 kw

Roller conveyor/conveyor/rollers -with drive Manufacturer: Schäfer Model/Type: Peem Year of manufacture: 2010/2011 Drive type: 24 volt belt drive Total length: approx. 50817 mm Total width: approx. 505 mm Conveyor width: approx. 420 mm Facility consists of: 24 segments: approx. 1890 mm 1 segment: approx. 2070 mm 1 segment: approx. 2430 mm 1 segment: approx. 810 mm 1 segment: approx. 630 mm 1 segment: approx. 540 mm Wheelbase: approx. 90 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 95 mm Including Quatronic-3PK-IEC-G2-2xAS (11 pieces) Feet to be ordered separately Price per meter Internal Article Number: 2026021104 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your i ...

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 4 pieces Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.100€ net plus VAT If you are interested, please contact us to confirm availability.

Telescopic Conveyor/Conveyor Belt/Telescopic Belt Conveyor -18 meters long Manufacturer: Podner Fördersysteme Condition: used Model: Belt/ Unloading Telescopic Conveyor Length retracted: approx. 7650 mm Length extended: approx. 18740 mm Total width incl. control cabinet: approx. 1200 mm Total width without control cabinet: approx. 920 mm Belt width: approx. 600 mm Strap type: smooth Conveying height: approx. 750 mm (incl. shims) Including control cabinet Including SEW motor: 2.2 KW and 0.55 KW Wiring diagram included Internal Article Number: 2026021105 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined convey ...

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

Roller conveyor/conveyor/rollers Manufacturer: Schäfer Year of manufacture: 2010/2011 Drive Type: Gravity Total length: approx. 4330 mm The plant consists of 2 segments: Segment length: approx. 2165 mm Total width: approx. 505 mm Conveyor width: approx. 420 mm Wheelbase: approx. 90 mm Castors are made of plastic Roll diameter: approx. 50 mm Steel frame Frame height: approx. 95 mm Frame width: approx. 40 mm Feet to be ordered separately Price: per meter Including side guide Internal Article Number: 2026021106 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloa ...

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3800mm Length extended 10000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 8m Shipping worldwide Price per piece 8.500€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3800mm Length extended 10000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 8m Shipping worldwide Price per piece 8.900€ net plus VAT If you are interested, please contact us to confirm availability.

Roller conveyor / work table / conveyor technology with drive Model: Flat Belt Condition: Used Year of Make: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 3250 mm Total width: approx. 540 mm Conveyor width: approx. 465 mm Castors/ center distance: approx. 125 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Including side guide Feet to be ordered separately Stock: 10 pieces Price per piece Internal Article Number: 2026021902 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination,  ...

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.500€ net plus VAT If you are interested, please contact us to confirm availability.

See Data Sheet

JenActUV UV Torpedo conveyor Model: UVTCONV500 Serial: 26557-PO1 Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

0: 10000 kg height of stroke: 130 mm Total height: 290 mm weight: 21 kg dimensions: 190 x 260 x 290 mm Hydraulic machine jack Foot height 22mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5000 kg height of stroke: 120 mm Total height: 243 mm weight: 15 kg dimensions: 170 x 230 x 250 m Hydraulic machine jack Foot height 19mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Design: stable -without: roller conveyor drive motor -Roll width: 557 mm -Conveying length: 680 mm -Diameter roll: 70 mm -Dimensions: 875/700/H125 mm -Weight: 44kg

Conveyor Belt, Belt Conveyor Belt, Conveyor Belt, Belt Conveyor, Chain Conveyor, Pallet Conveyor Belt, Pallet Conveyor -Drive: geared motor SEW-Eurodrive with brake 0.55 kW/15 m/min -Weigh cell: Bizerba HLC-C3 -Chain track width: 750 mm -Dimensions: 1995/990/H480 mm -Weight: 334 kg

All types of conveyors according to the buyers specifications

- Stainless steel structure - Belt length: 4000 mm - Belt width: 300 mm - With 4 feet - Without electrical control box

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -Height: 660 to 1000 mm adjustable on both sides -Steel frame: solid -Dimensions: 1120/515/H660 mm -Weight: 64 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 500 mm -Rolls: Ø 50 mm -Roll distance: 135 mm -Transport dimensions: 2055/555/H100 mm -Weight: 36 kg

Equipment: Transnorm belt conveyor 90 degrees Left version, bandwidth 60 cm, height approx. 86 cm, Drive 400V

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roll width: 410 mm -Diameter roller: 50 mm -Roll speed: 21 m/min -Drive for: slewing ring SEW-Eurodrive 0.18 kW with brake -Dimensions: Ø 870/1035 mm -Weight: 162 kg

Roller conveyor, conveyor belt, roller track -Roller conveyor: 5 floors -Roller width: 300 mm -Rollers: Ø 50 mm -Roller spacing: 150 mm -Floor spacing: 700 mm -Overall dimensions: 650/400/H3010 mm -Weight: 72 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Diameter roll: 80 mm -Transport roller width: 750 mm -Socket: M10 x 21mm -Price per piece - Quantity: 2 pieces -Minimum purchase: complete -Dimensions: Ø 80/798 mm -Weight: 3.2kg/pcs

Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roller conveyor: with hydraulic drive -Roll width: 500 mm -Diameter roller: 50 mm -Center distance: 70 mm -Hydraulic motor: Danfoss type OMM 12.5 -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

length in total: 3000 mm band width: 200 mm conveying height: 1900 total power requirement: 1 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 3x1x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Execution: difficult -Roll width: 940 mm -Roles: Ø 79 mm -Roll distance: 100 mm -Dimensions: 1670/1070/H280 mm -Weight: 206 kg

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut fig.: approx. 380 x 60 x 50 mm Mounting plate abm.: approx. 140 x 135 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

Long link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link chain wheel, conveyor chain wheel -Pitch: 168 mm -Teeth: 8 -Tooth width: 28 mm -Outer diameter: 437 mm -Take: Ø 100 mm -Price: per piece -Number: 5 pieces -Weight: 63.5 kg/piece

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 275 mm Frame width: approx. 245 mm Minimum height: approx. 660 mm Maximum height: approx. 900 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut abm.: approx. 180 x 60 x 50 mm Mounting plate abm.: approx. 140 x 220 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

Specifications Roller conveyor 4000 mm Roll width 300 mm Rolls Ø 30 mm Number of rolls 16 Support feet 2 elements à 2m

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -both sides: different height adjustable -Steel frame: solid -Dimensions: 1100/510/H780 mm -Weight: 64 kg

7,48m conveying spiral, steel, MDB 80, , new Special price ! As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging.

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Roll width: 610 mm -Transport length: 700 mm -Roll diameter: 63 mm -Roll distance/center distance: 100 mm -Dimensions: 780/620/H165 mm -Weight: 29 kg

Heavy-duty roller conveyor Specifications: • Length (mm): 2900 • Width (mm): 1250 • Height (mm): 150

Roller conveyor length: 2200 mm Wheel width: 650 mm Roller conveyor width: 900 mm : 2000 kg Dimensions (LxWxH): 2,2x0,9x0,7 m Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -not powered -Roll width: 850 mm -Transport length: 1200 mm -Rollers: Ø 60 mm -Roll distance/center distance: 130 mm -Total height adjustable roller conveyor: 80 mm -Dimensions: 1200/945/H80 mm -Weight: 48 kg

Roller conveyor, roller track, roller track -Roller width: 595 mm -Conveyor length: 1500 mm -Roller diameter: 20 mm -Roller conveyor height: 280 mm -Dimensions: 1500/760/H280 mm -Weight: 44.5 kg

Roller conveyor, conveyor belt, roller track -Roller width: 600 mm -Conveyor length: 1600 mm -Roller diameter: 108 mm -Axle spacing: approx. 180 mm -Height: 270 mm -driven: via chain -Geared motor: 0.75 kW 28 rpm -Dimensions: 700/1900/H270 mm -Weight: 180 kg

Roller conveyor, conveyor belt, roller track -not powered -Roller width: 800 mm -Total width: 850 mm -Roller Ø: mm -Roller conveyor height: 650/770 mm -fixed part: 3000 mm -movable part: 1000 mm -Transport dimensions: 3000/850/H800 mm -Weight: 110 kg

Feed technology, feed device, storage container with automatic feed, spiral conveyor, feeder-bowl -Automatic feeder without: storage container -Connection: 230 volts -Dimensions: 310/310/H260 mm -Weight: 31 kg

Output conveyor for Horizon SPF 20A / FC-20