134,098 used machines on RESALE, but how to find them? Machine Search
Number of sanding units: 10 St. sanding width: 25-240 mm Sanding height max.: 15-140 mm MB ROBA Fentech ORBITAL, fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine wood sanding - Impregnation sanding - Intermediate lacquer sanding Advantages of the ROBA Fentech principle: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm sanding tool diameter optimizes sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a through-feed machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design ...
working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...
Strip width: 50 mm incl. grinding wheel Diameter: 150 mm Grinding wheel width: 25 mm Auction-ID: A7-49089-372
Machine number: 87018430 Belt size: 200 x 1800 mm Belt speed: 10/20 Table dimensions: 220 x 190 mm Auction-ID: A7-49089-381
Belt size: 100 x 1000 mm Belt speed: 7.5/15 m/s Auction-ID: A7-49089-478
Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...
Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...
Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...
Modular unit, finishing unit, grinding unit, grinding station, belt sander, belt sander, edge sander, edge sanding machine, profile grinding unit, small belt sander -Belt sanding unit: from belt sanding machine -Type: unfortunately no type designations -Drum motor: Perske type DKAL 2117/2 3.7 kW 2840 rpm -Roller: Ø 183 x 370 mm -Rollers: Ø 117 x 325 mm -Individual components: see photos -Transport dimensions: 1110/560/H300 mm -Weight: 195 kg
Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Control: electro-hydraulic band saw fully automatic, with additional : semi-automatic semi-automatic-dynamic manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) MEP - WINDOWS numerical control unit User interface with 7” touch screen display mechanical buttons for the sawing machine’s operating functions guarantees reliable opera ...
width of the strips: 50 mm band length: x mm band speed: x m/min speeds: 1800-3600 U/min total power requirement: 5.5 kW weight of the machine ca.: 0.6 t 1x Belt 1x Polishing www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kallfass KFP-4000-4 Stacking Package length 2500mm Feeding to planer feeder Conveyor for spacers Net price
JOHANNSEN Type T 95 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: Grinding length: approx. 2,780 mm Grinding width: approx. 950 mm Motor: 6 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: Working width: approx. 1,300 mm Grinding units: 2 Clearance height: max. approx. 150 mm Motor power: 18.5 & 15 kW Condition: Gebraucht Location: Miltenberg, Germany
JOHANNSEN Type T 85 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: Table size: 2,800 x 950 Motor: 5.5 kW Belt width: 150 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----------------------------------------------------- Manufacturers description: ----------------------------------------------------- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrate ...
Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...
Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...
FBR Export Long Grinder Table length 2900 mm. Table width 800 mm. Vertical stroke 550 mm. Tape length max. 7800 mm. Belt width 150 mm. Belt feed power 2.2/3kw 0.25kw Table Lifting Motor Overall dimensions 4400 x 1370 x 1400 mm.
workpiece height: max. 940 mm total power requirement: 6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 1,0 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 580 mm Motor output: 2,2 kW Table dimensions: 600 x 540 mm Table tiltable: 45 Grad machine weight ab.: 270 kg : Ja dimensions of machine: 2.085 x 1.035 x 820 mm cutting speed: 1.350 m/min sawblade width: 6-25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 910 mm Number of sanding units: 1 st. Workpiece thickness max.: 3 - 160 mm sanding belt measurements: 2.200 x 1.010 mm Feed motor: 0,55/0,75 kW Feed speed: 4,5 / 9 m/min. Weight: 1.210 kg : 18,5 m/sec output: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SCM Sandya Uno Wide Belt Sander Working width 900mm Working height 3-160mm Number of generators 2 Aggregate in rubber shaft Combi unit with boot 11kw main motor Pneumatic Oscillation Sandpaper Dimensions 930×1525 Two feed speeds of 4.5-9m/min Machine Dimensions:1560 x 1280 x 1920mm Weight about 1100kg Net price
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-49495-236
ALBIS-MASCHINEN stationary belt sander for deburring, sanding, finishing, adjustment and light grinding in mechanical workshops, locksmiths, metal fabrication, industrial maintenance and machine building. This machine allows the processing of metal parts, mechanical components, tools and construction elements thanks to its vertical abrasive belt and support table. Equipment particularly suitable for general mechanical workshops, tool manufacturers and industrial companies. Auction-ID: A1-48554-240
METABO K 100 industrial belt sander, designed for grinding, deburring and finishing operations in the mechanical workshop or in industrial production. This METABO model is a professional backstand for precise and efficient material removal, particularly used in the metalworking, locksmithing and boilermaking sectors. Thanks to its large tread size and its adapted speed, it offers an excellent compromise between power, precision and quality of finish. Ideal machine for: Machine shops Industrial maintenance Metal construction Preparation of parts before welding Deburring and finishing The METABO brand is recognized for the robustness and reliability of its professional equipment. Auction-ID: A1-48554-39
Bench-mounted industrial belt sander, ideal for grinding, deburring and finishing operations in mechanical workshops or metal fabrications. This type of machine, also known as a backstand or belt grinder, is widely used for metalworking, allowing for precise and fast material removal. The set is ready to be used as a complete workstation with a heavy-duty workbench, making it an ideal solution for: Mechanical workshops Boilermaking locksmith Industrial maintenance Production and manufacturing The vertical abrasive belt allows you to work efficiently on different types of workpieces, especially for deburring and preparation before welding. Auction-ID: A1-48554-37
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-49495-36
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-49495-136
Unit 1: Combination sanding unit Effective sanding width: 650 mm. Sanding belt dimensions: 1900 x 650 mm. Sanding belt motor: 7.5 kW Sanding belt runs over a contact roller and sanding shoe Unit 2: Brush unit / structuring Sanding brush motor: 5.5 kW Brush diameter 240 mm, shaft bore 50 mm Minimum workpiece length: 290 mm. Workpiece thickness: 0.5 ? 200 mm. Workpiece feed via conveyor belt, feed speed 8 and 16 m/min Motorised height adjustment with digital electronic thickness gauge Thickness sensor Air Pressure safety device
Wide belt sander with 2 units Max. working width: 910 mm. Panel transport by belt, 2 feed speeds, 4,5 / 9 m/min Equipment: Roller with motor 11 kW, 90? Shore lifting facility of first roller on control panel Combi unit with single belt over roller and pad, roller 45? Shore mecanical lifting of second roller oscillation with infrared detection electro magnetic break main motors
Useful sanding width: 1100 mm. Sanding belt dimensions: 1110 x 1900 mm. Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70? shore 18.5 kW, Roller 50? shore Aggregate 2 & 3 with shared motor Max. sanding thickness: 150 mm. Throughput speeds: 2,5 - 11 m/min Motor through-belt: 0,55 kW Height adjustment motorized, motor 0,26 kW Automatic thickness adjustment Input rollers length 700mm Output rollers 1600mm Touchscreen
Sanding width 1350 mm. Workpiece thickness: 4 - 170 mm Equipped with 3 aggregates, 1st steelroller, motor 22kW 2nd roller 65? Shore, motor 15kW 3th Kombi unit, motor 12kW, combination roller with 45? Shore and pneumatic controlled sanding shoe cleaning brush at outfeed Electrical height adjustment of the transport table. Pneumatic sanding belt tension. Sanding belt oscillation. Pneumatic sanding belt cleaning Throughput speed with variator Workpiece thickness measurementm with manual setting at the machine feed Sanding belt dimensions: 1370 x 2620 mm 5 rollers on in- and outfeed table
Fine sanding machine Working width: 1300 mm. Workpiece thickness: 3-140 mm N? of units: 2 Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 18,5 kW motor,0,5-12 m/s belt speed with freq. Controlls, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 15 kW motor, 0,5-12 m/s belt speed with freq. Controlls, belt cleaning Brush cleaning unit scotch bride 250 mm diameter, 4 kW Brush cleaning unit 150 mm diameter, 1,5 kW Feedbelt speed 5 - 25 m/min, 1,5 kW motor, frequency control Working height 930 mm +/- 20 mm Carpet cleaning brush EA dedusting machine high-pressure blow-off system with rotating nozzles and ionization for statically charged dust
Sanding width 1350 mm. Workpiece thickness: 3 - 200 mm Equipped with 3 aggregates, 1st steelroller, motor 18,5kW 2nd roller 65? Shore, motor 15kW shared with 3th aggregate 3th Kombi unit, combination roller with 45? Shore and pneumatic controlled sanding shoe Electrical height adjustment of the transport table. Pneumatic sanding belt tension. Sanding belt oscillation. Pneumatic sanding belt cleaning Throughput speed with variator Workpiece thickness measurementm with manual setting at the machine feed Sanding belt dimensions: 1370 x 2150 mm 4 rollers on in- and outfeed table
Sanding belt 75x2000 mm for metal, various grains, K40, K60, K120 Auction-ID: A1-48552-164
Sanding belt 150x2000, speed 33 m/sec, delivered in original packaging Auction-ID: A1-48552-160
Surplus store inventory consisting of Leather Belts, Buckles, Scarves. In various sizes and colors. Auction-ID: A1-49001-142
\"1. Combination unit rubber roller with electric sanding shoe (function not tested) 2. Shoe power unit Cleaning brush incl. rigid sanding shoe for solid wood pulp Grinding width max.: 1100 mm Sanding belt dimensions: 2150x1130 mm Carpet feed speed: infinitely variable Sanding belt speeds per unit: 1 aggregate: 18 m/sec - 2 units: 2 speeds Roller table at the inlet and outlet incl. vacuum + vacuum blower Total connected load: 33.4 Kw SALE WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: it is expressly pointed out that this lot only corresponds to the scope of the product description. If objects can be seen in the photo that are not expressly listed in the lot description, they are not part of the sale. Of course, this also applies to tools, additional equipment, accessories, software ...
Number of sanding units: 2 st. sanding width: 180 mm Sanding height max.: 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided, sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers, infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machines upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch wi ...
Technical data Manufacturer: F. Zimmermann GmbH, Denkendorf/Esslingen Type: PS 1/2 Machine Type: Vertical Belt Grinder Power: 1.35 kW Voltage: 380 V Frequency: 50 Hz Configuration Large work table with sanding belt feed-through Adjustable strap guides Control panel with switching levels I/II, left/right rotation, stop button and emergency stop Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-24
Rösler mass finishing machine incl. belt dryer, vibrator & placement system Auction-ID: A7-49302-3002
Metal storage cabinet with sliding doors, equipped with several drawers and interior shelves. The bundle includes the contents visible in the photos, consisting mainly of abrasive belts, sanding consumables and associated storage accessories. Robust construction suitable for organized storage of consumables, parts or supplies. Practical solution for workshop, maintenance, technical storage or general professional use. Auction-ID: A1-48554-185
Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...
230V - 3000W 17.4A Speed 2840 rpm Complete with 8 new sanding belts. In working order. Auction-ID: A3-46152-6135
Machine Brand: H.M. Machinery a/s Manufacturer Address: DK-7700 Thisted (Denmark) Type: HM TAS 75 Serial Number: 49 371925 437 Sanding belt: 75 x 2000 mm Version: fixed belt sander on steel base plate/tripod, with tilting/adjustable motor and tensioning arm, emergency stop button on the machine Electrical data Voltage: 400 V, 3-phase Frequency: 50 Hz Current: 6.2 A Power: 3.0 kW Auction-ID: A3-46152-11323
maximum number of results exceeded
please refine your search
50 € 
