conveyor belt pallet used for sale

Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine.

Sheeter with centering belts Nanmak DS 760 Year of Make: 2022 Condition: Test Machine Belt speed infeed/outlet separately adjustable Roller speed adjustable Adjustable roller gap Belt width 76 cm Working length 172 cm Length per band 81 cm Band height from the ground: 108 cm Centering belt also available as 3 rows Flour shakers External dimensions (LxWxH): 172x110x150 cm

Microwave tunnel conveyor dryer for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water cooling circuit included. Ventilation system to extract water vapor from the chamber not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electrical • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: PTFE food grade (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 150 ...

This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine.

PART NUMBER 7967 SPECIFICATIONS - max workpiece width 1100mm - max workpiece height 170mm 2 generators: 1) Metal corrugated roller for calibration 2) Grooved rubber roller + boot + metal roller – in advance: - Rubber roller, sliding - generator (two generators on one motor) 15kW - Rubber roller, sliding - Rubber Output Roller - blowing the tape – from below: - 2 metal sliding rollers - pulling tape - Rubber rollers, sliding 2pcs - pneumatic oscillation of belts - grinding thickness potentiometer - electric table top lift + manual (for precise adjustment) - air brake - 2 types of feed speed - working pressure 6-8bar - Diameter of the extraction port 2x140mm - overall dimensions l/w/h 1830x1670x1950mm - weight 1160kg ADVANTAGES – Italian production – 2 grinding units – unpainted – used grinder, perfect condition Net price: 77900 PLN Net  ...

Part number 7976 SPECIFICATIONS - max workpiece width 1100mm - max workpiece height 160mm 2 generators: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – in advance: - 2 metal rollers, sliding - pressure - Aggregate - 2 metal sliding rollers - Aggregate - 2 metal rollers, sliding - cleaning brush – from below: - 2 rubber rollers, slip - pulling tape - pneumatic oscillation of belts on photocells - electric table lifting - 2 types of feed speed - working pressure 8-10bar - Extraction port diameter 2x200mm - total power 30kW - overall dimensions l/w/h 2230x2020x2050mm - weight about 3000kg ADVANTAGES – German production – 2 generators – used grinder, very good condition Net price: 16900 PLN Net price: 4024 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

PART NUMBER 7910 SPECIFICATIONS - max workpiece width 1350mm - max workpiece height 150mm – in advance: - rubber roller, pressure roller And the aggregate (metal cylinder grooved for calibration) II aggregate (two metal rollers, smooth + sequential shoe) - rubber roller, pressure roller - cleaning brush – from below: - Introductory roller, metal - pulling tape - Outlet, slip, metal roller - pneumatic oscillation of belts on photocells - electric table lifting - 2 types of feed speed 2-14m/min - main motor 5.5/15kW - brake - grinding height potentiometer - feed motor 0.75kW - working pressure 8bar - Extraction port diameter 200mm, 120mm - dimensions l/w/h 1860x2200x1980mm - weight 1995kg ADVANTAGES – German production – unpainted – DTR documentation – used grinder, very good condition Net price: 38900 PLN Net price: 9262 EUR d ...

Belt sander manufactured in 2008. This TECNOLEGNO COMPACT 52 is a 5-aggregate sander designed for sanding edges and profiles. If you are looking to get high-quality sanding capabilities, consider the TECNOLEGNO COMPACT 52 machine we have for sale. Contact us for further details.

working range 200 mm daylight 12 cm setting plane 150x50x113 working hight 103 cm

Grinding width 950 mm  Steel roller for calibration  1 belt combi unit design Ce Version V 400/50 Entrance and exit table extensions Moving carpet centering  Automatic electronic operation control

2 engines  Motorized height adjustment  Table length 300 cm without extraction fan  Space requirement length 430 cm

Wide belt grinding machine  with 3 rollers and 3 belts Grinding width 1300 mm Year of manufacture 2001 Power 33 kw 2 main engines  Amper 69

Belt sander manufactured in 2019. This Lingi Jianzhong BSG2613C features a maximum working width of 1300 mm and a processing thickness range of 5-80 mm. It includes a grinding belt dimension of 1350x2800 mm and operates at a speed of 31 m/s. If you are looking to get high-quality sanding capabilities, consider the Lingi Jianzhong BSG2613C machine we have for sale. Contact us for further details.

TECHNICAL SPECIFICATIONS Manufacturer: BLEICHERT Designation: Climbing band Version: stationary Wheelbase: 31,000 mm Strip width: 500 mm Year of Make: 1995 Drive power: 4 kW Drive type: SEW-EURODRIVE slip-on gear motor Support: free supporting structure Catwalk: single-sided Handover: Transfer hood Belt tension: tension slide Top Strap Cover: No Galvanized version: yes SPECIFIC COMMENT - Very good condition (both steel construction and strap) - Wide platform with stair ascent

Band Saw Bizerba FK 23, completely in stainless steel, with brake, portioning stop, new scrapers and new saw blade, Connection 400V, year of construction 2008, dimensions LxWxH approx. 60x52x85cm, weight approx. 75kg, good used condition, works perfectly

Table dimensions: 800 x 2790 mm throat: 550 x 310 mm motor power: 4,0 kw sanding belt measurements: 150 x 7800 mm : : : 2600 Working width: 850 mm Motor output: kW Length of sanding paper: mm Dust suction hood: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units  LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller  - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for the aggregates LED interior lighting Y version for RTC - Pneumatic on/off switch for the roller of the first unit ? R? - Pneumatic on/off switch for the roller of the second comb belt ? TC? - Split elastic and electronic sanding pad (56 graduation) - Electronic thickness adjuster SMART CONTROL S electronic control 10-inch color LCD touchscreen Motor power 15 kW

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for visual access to the units LED lighting for indoor lighting Vacuum table with 3 kW electric fan Tynex Texturing Brush with Tynex Brush K46 Y-type - Pneumatic on/off for the roller of the first unit ? R? - Pneumatic on/off for the roller 2nd abrasive belt roller combination unit TC - Elastic electronic sanding shoe (56 graduation) - Electronic thickness adjuster FOX 1000S electronic control 10.4 inch touch screen 15 kW motor power 1-motor version

roll diameter: 400 mm throat: 400 mm workpiece height: mm table-size: 610 x 500 mm saw band length: 2780 - 2980 mm turning speeds: 22 - 147 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,6 x 0,8 x 1,9 m Bandsaw with - Ideal welding unit - Grinding unit - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A conveyor belt with a cooling tunnel is being sold. Metal chain links. Bj 2022 Width approx. 35cm Band length approx. 235cm Machine dimensions approx. L 265cm W 95cm Price is net VAT Machine can and should be tested on site, as warranty or guarantee is excluded. Loading facilities available Article location Nuremberg

Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

A Costa Levigatrici wide belt grinding and deburring machine is available. Working width: 1150mm, abrasive belt dimensions X/Y: 1180mm/2200mm, max. speed: 18m/s, contact roller diameter: 200mm, pressure roller diameter: 55mm, max. workpiece thickness: 160mm. Machine dimensions X/Y/Z: approx. 1850mm/1950mm/2100mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

A Costa Levigatrici wide belt sanding and deburring machine is available. Working width: 1350mm, sanding units: 2, abrasive belt dimensions X/Y: 1380mm/2620mm, working height: 920mm, contact roller width: 1350mm, contact roller diameter: 200mm, roller hardness 1/2: 35Shore/80Shore, max. abrasive belt speed: 18m/s, machine dimensions X/Y/Z: approx. 2050mm/1900mm/2350mm, weight: approx. 2800kg. Documentation available. An on-site inspection is possible.

Code: 0443 Brand: CMC - ITALY Model: SC 800 - CE Standard Band saw with covered wheel for cutting wood, carpentry, furniture, fixtures, plastics, aluminum, and other materials - CE Standard Technical specifications: Flywheel diameter 800 mm Working table size 710 x 1110 mm Cutting height 450 mm Blade length 5620 mm Motor 5,5 Hp Overall dimensions mm 1450 x 850 x 2400 h Weight kg 580

TECHNICAL DATA: Work table: 800 x 1180 mm Flywheels: Ø 900 mm Installed power: 5.5 kW TECHNICAL DATA SPLITTING MACHINE: Roller: Ø 200 mm Roller height: 210 mm Max. distance between angle and saw blade: 300 mm Max. distance between roller and saw blade: 100 mm

Code: 0450 Brand: MABO - ITALY Model: OLIMPIC - CE Standard Belt sanding machine for wood, joinery, furniture, wooden joinery, metals, stainless steel, aluminium and other materials – CE Standard Technical data: Work surface length 2500 mm Work surface width 600 mm Table height adjustment by handwheel Belt width 120 mm Motor power 2 Hp Speed 2820 rpm Dust extraction inlet diameter 110 mm Overall dimensions mm 3000 x 1200 x 1600 h Weight kg 230

Conveyor belt system Trio technik BJ 2022

: 15282 90 band length: 4600 - max. 4750 mm : Fabr. Ideal weight: ca. 890 kg dimensions of the machine ca.: 130 x 850 x 2300 mm Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm Control: MEP CNC total power requirement: 2.2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : semi-automatic semi-automatic-dynamic manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) MEP - WINDOWS numerical control unit User interface with 7” touch screen display mechanical buttons for the sawing machine’s operating functions guarantees reliabl ...

cutting diameter: 330 mm saw band length: 4115 mm cutting width: 0,9 mm main drive motor: 3,7 kW Roller conveyor length: 5000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 13 KVA weight of the machine ca.: 1,8 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

cutting diameter: 330 mm saw band length: 4115 mm cutting width: 0,9 mm main drive motor: 3,7 kW Roller conveyor length: 5000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 13 KVA weight of the machine ca.: 1,8 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

cutting diameter: 400 mm saw band length: 4715 mm cutting width: 1,3 mm main drive motor: 7,5 kW Roller conveyor length: 4000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 14 KVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

cutting diameter: 400 mm saw band length: 4715 mm cutting width: 1,3 mm main drive motor: 7,5 kW Roller conveyor length: 4000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 14 KVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

cutting diameter: 1000 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1300 mm saw band length: 11880 mm cutting width: 1,6 mm main drive motor: 11 kW table surface area: 2500x1300 mm cutting range: 1300x1300 mm total power requirement: 16 KVA weight of the machine ca.: 17,75 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...

cutting diameter: 1300 mm saw band length: 11880 mm cutting width: 1,6 mm main drive motor: 11 kW table surface area: 2300x1200 mm cutting range: 1300x1300 mm total power requirement: 16 KVA weight of the machine ca.: 17,75 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...

cutting diameter: 1000 mm saw band length: . mm cutting width: . mm main drive motor: . kW cutting range: 1000x1000 mm total power requirement: . KVA weight of the machine ca.: . t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1000 mm saw band length: . mm cutting width: . mm main drive motor: . kW cutting range: 1000x1000 mm total power requirement: . KVA weight of the machine ca.: . t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 800 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 530 mm saw band length: 6670 mm cutting width: 530 mm Control: CNC main drive motor: 7,5 kW roll guideway: optional total power requirement: 13 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of  ...

material thickness: 0,5-50 mm material width: 1500 mm feed: 4 m/min Operating hours: 900 h weight of the machine ca.: t : dimensions of the machine ca.: m The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0460 Brand: SAMCO Model: LL 3000 Belt sander with double goose neck for wood, furniture, window frames, composite materials, aluminium and various Technical data: Cast-iron structure Table length mm 3000 Table width mm 800 Vertical stroke mm 650 Motor Hp 4 N°2 speeds rpm 1450/2800 Automatic table lifting Belt width mm 120 Belt length max mm 8000 Overall dimensions mm 4350 x 1500 x 1550 h Weight kg 600

Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Code: N0556 Brand: HAMMER - FELDER GROUP Model: N 3800 - CE Standard Band saw for cutting wood, plastics, composite materials and various - CE Standard Single-phase motor v. 220 - Kw 1,5 Flywheel diameter 380 mm Cutting height 310 mm Tiltable cast iron table -5/+45° Table dimensions 400 x 510 mm Roller guides above and below the table Blade length 3556 mm N° 2 blades supplied User manual Overall dimensions mm 700 x 600 x 1700 h

Code: 0475 Brand: STRIEBIG - SWITZERLAND Model: AUTOMAT TRK 6220 AV Automatic vertical panel saw with scoring unit for precise cutting of wood panels, custom furniture, kitchens, bathroom furniture, doors, window frames, plastics, composite materials and various Technical data: Cutting length mm 5300 Cutting height mm 2200 Cutting depth mm 80 Blade diameter mm 300 F30 Speed rpm 4750 Motor power Kw 5,5 Scoring unit Support rollers on the table to facilitate panel handling Automatic vertical movement with speed regulator Automatic horizontal movement with speed regulator Intermediate support for small panels Suction mouth diameter mm 100 Overall dimensions of mounted machine : mm 6760 x 1800 x 3015 h Weight kg 1050 Overall dimensions for transport : Machine mm 6760 x 1800 x 2650 h - kg 450 - Beam mm 3000 x 1000 x 1000 h - kg 600

Calibration and fine sanding machine, wide-belt sanding machine with electronic segment sanding shoe and paint sanding A video of the running machine can be sent on request. Ideal automatic sanding machine for interior finishing companies, also suitable for intermediate paint sanding. Binding machine with combination unit and electronic link pressure bar, edge segments can be switched on and off Segment width of pressure beam 35mm Contact roller can be inserted pneumatically, low wear due to ribbed steel roller Grain size compensation Drive motor 7.5kW with automatic motor brake, infinitely variable belt speed frequency-controlled from 2 - 18 m/s Webbing feed infinitely variable via frequency converter from 2.5 - 13m/min Pneumatic Workpiece-Controlled Belt Blowout Device Cleaning brush on the spout Constant working height 900mm by adjusting the upper part of the machine, t ...

Number of sanding units: 8 St. sanding width: 25-240 mm Sanding height max.: 15-140 mm B ROBA Fentech, Fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine sanding of wood - Sanding after impregnation - Intermediate lacquer sanding Advantages of the ROBA Fentech system: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm diameter sanding tools optimize sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a straight-through machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design  ...

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...