conveyor belt pallet used for sale

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 660 - 815 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible.

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 8 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible.

Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible.

: 3000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 12 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 800 - 950 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 pieces of Soco roller conveyor steel galvanized with a length of about 2 m and 3 pieces with a length of about 1 m. -Usable width approx. 0.50 m. -Adjustable in height and inclination.

Length from approx. 1400 mm to 4200 mm extendable. Working height adjustable from approx. 650 to 950 mm. Usable width approx. 500 mm. Frame galvanized, plastic support rollers. 8 feet, each with brakeable castors. At the end of the scissor roller conveyor there is a stop device, which can also be folded away.

OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight section ...

Conveyor system for powder products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 230 liter volume. Capacity 3 to 5 m?/h depending on product. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Feeding system for smaller quantities of free flowing products (rice, sugar, beans, etc.). Stainless steel with large feeding container (60 liter). The container is filled manually in the bottom position. In the top position it will be emptied automatically (complete zyklus: 1 minute). Suitable as infeed system for smaller Volumetric-Cup- or small 2- and 4-head-systems. - Specifications: max. height: 3-5m | machine dimensions: L1400xW700xH3500mm | 220V, 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Infeed Conveyor, transport system with plastic containers to transport the product from vibration feeder to weighing unit, stainless steel, 380V/1kW, L2800xW600xH3950mm, 500/600kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specification: capacity: up to 3 m?/h depending on product, suitable to dose up to 5kg/filling | discharge height: ca. 1.850m | standard angle: 45? | diameter of pipe: 114mm | power: 380V, 0.81kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 130kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50  ...

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specifications: capacity: up to 5 m?/h depending on product, suitable to dose up to 10kg/filling | Discharge height: ca. 1.850mm | standard angle: 45? | diameter of pipe: 141mm | Power: 380V, 1.56kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 170kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30- ...

Stock number: D1223, Material: Galvanized, In stock: Yes, Amount in stock: 1 pc., O-profile: Yes, Dimensions: Ø 100 x L 2980 mm., Motor: 1,1 kW, 220/380 Volt, 388 rpm, Dimensions inlet: Ø 150 mm., Dimensions outlet: Ø 150 mm.

Stock number: D998, Screw conveyor, stainless steel,, U-profile., Ø 310 x L 1930 mm., 3 kW gear motor, 61 rpm., 220/380 V., With dosage screw Ø 60 mm., Material: Stainless steel AISI 304, Dimensions: Ø 310 x L 1930 mm.

Stock number: D999, Screw conveyor, stainless steel,, O-profile with inlet hopper., 2,2 KW gear motor,, 220/380 volt., Ø 250 x L 2180 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 2180 mm.

Stock number: D971, Screw conveyor, stainless steel,, o-profile., Ø 170 x L 1580 mm., 1,5 kW gear motor, 71 rpm., 220/380 V., Material: Stainless steel AISI 304, Dimensions: Ø 170 x L 1580 mm.

Stock number: D936, Draining screw conveyor, stainless steel,, Iras type TU, 5,5 kW gear motor., 65 rpm., 400/690 V., Draining screen with, 5 x 20 mm. gap., Ø 400 x 3800 mm., Material: Stainless steel AISI 304, Dimensions: Ø 400 x 3800 mm.

Stock number: D654, Screw conveyor, stainless steel,, O-profile., 2,2 kW gear motor, 70 rpm, 380 V., Ø 250 mm outlet with bag squeezer., Ø 160 x 2050 mm screw., Material: Stainless steel AISI 304, Dimensions: Ø 160 x 2050 mm.

Stock number: D656, Screw conveyor, stainless steel,, BM., 100 l. product funnel with flexible screw., Ø 60 mm., 1,1 kW gear motor, 397 rpm, 380/420 V., Litre: 100 , Material: Stainless steel AISI 304

Stock number: D653, Screw conveyor, stainless steel,, O-profile., 1,1 kW gear motor, 18,8 rpm, 220/380 V., Ø 140 x L 1950 mm snekke., Material: Stainless steel AISI 304, Dimensions: Ø 140 x L 1950 mm.

Stock number: D605, Screw conveyor, stainless steel,, O-profile., Inlet connection branch Ø 230 mm., Outlet connection branch 940 x 250 mm., 1,1 kW, 6,2 - 43 rpm, 220/380 V., Ø 250 x L 1950 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 1950 mm.

Stock number: D609, Screw conveyor, stainless steel,, trough type,, Ø 250 x L 3380 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 3380 mm.

Stock number: D563, Screw conveyor, stainless steel,, BENA 1996., O-profile, Ø 138 x L 1015 mm., 1,3 kW gear motor., Material: Stainless steel AISI 304, Dimensions: Ø 138 x L 1015 mm.

Stock number: D513, Vacuum screw conveyor, stainless steel,, Gerivac., Ø 150 x 2250 mm screw., 4 hp gear motor, adjustable speed., 22,5 - 158 rpm., Material: Stainless steel AISI 304, Dimensions: Ø 150 x L 2250 mm.

Stock number: D429, Screw conveyor, stainless steel,, O-profile., Ø 210 x L 1500 mm., 0,55 kW gear motor, 52 o/min., 220/380 V., Material: Stainless steel AISI 304, Dimensions: Ø 210 x L 1500 mm.

Stock number: D2025, Screw conveyor, stainless steel,, estimated 1,5 kW motor, 380 volt., U-profile,, Ø 320 x L 1720 mm., Material: Stainless steel AISI 304, Dimensions: Ø 320 x L 1720 mm.

Stock number: D1195, Screw conveyor, stainless steel/steel 37,, u-profile., 1,1 kW. gear motor,, 220/380 Volt., 28 rpm., Ø 230 x L 2000 mm., (Fits SD067)., Material: Stainless steel AISI 304/steel 37, Dimensions: Ø 230 x L 2000 mm.

Stock number: D1181, Screw conveyor, stainless steel,, 0,55 kW gear motor., 121 rpm,, 220/380 Volt., U-type with lid and washing pipe,, obliquely placed on legs., Ø 200 x L 1700 mm., Material: Stainless steel AISI 304, Dimensions: Ø 200 x L 1700 mm.

Stock number: D1154, Screw conveyor, stainless steel,, o-profile., 1,1 kW. gear motor,, 230/400 Volt., Ø 130 x L 3050 mm. screw., Material: Stainless steel AISI 304, Dimensions: Ø 130 x L 3050 mm.

Stock number: D1122, Screw conveyor, stainless steel,, o-profile., 0,37 kW. gear motor,, 380 Volt., Ø 140 x L 1580 mm., Material: Stainless steel AISI 304, Dimensions: Ø 140 x L 1580 mm.

Stock number: D1118, Screw conveyor, stainless steel,, u-profile, with 3 pcs. of removable lids., 0,75 kW. gear motor,, 133 rpm., 220/380 Volt., Ø 125 x L 2500 mm., Material: Stainless steel AISI 304, Dimensions: Ø 125 x L 2500 mm.

Stock number: D1117, Screw conveyor, stainless steel,, u-profile, with lid., Double jacket., Insulated, outer fully welded stainless cladding,, 1,5 kW gear motor., 26,24 rpm., 230/400 Volt., Ø 300 x L 4170 mm., Material: Stainless steel AISI 304, Dimensions: Ø 300 x L 4170 mm.

Stock number: D1042, Screw conveyor, stainless steel,, U-profile with lid and inlet hopper., Standing in leg rack,, Ø 250 x L 1730 mm., 2,2 kW gear motor,, 64 rpm., 380/415 volt., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 1730 mm.

Stock number: D669, Band conveyor,, double track, without legs., W 2 of 85 x L 1470 mm plane band., Excl. motor., Dimensions: W x 2 of 85 x L 1470 mm plane band.

Stock number: D826, Double conveyor, stainless steel,, rolling conveyor., Automatic stop for subject boxes., Excl. steering., L 1600 x W 150 x H 880 mm., Material: Stainless steel AISI 304, Dimensions: L 1600 x W 150 x H 880 mm.

Stock number: D481, Band conveyor, stainless steel,, standing on legs., Side control., Band speed 21 m/hour, 0,37 kW motor., W 800 x L 3400 mm., Material: Stainless steel AISI 304, Dimensions: W 800 x L 3400 mm.

Stock number: D391, Band conveyor, stainless steel,, standing on painted rack., Drum motor., L 3300 x W 500 mm plane band., Material: Stainless steel AISI 304, Dimensions: L 3300 x W 500 mm plane band.

Stock number: D1058, Band conveyor,, Boe-therm., 0,04 kW,, 380 volt., Rubber band W 500 x L 1800 mm., Dimensions: W 500 x L 1800 mm.

Stock number: D1037, Conveyor, King,, standing on legs., Plastic lamella band W 100 x L 4900 mm., With drive station., Dimensions: Plastic lamella band W 100 x L 4900 mm.

Stock number: D1039, Conveyor, SOCO,, mounted with plastic rolls., Standing on 2 legs,, W 500 x L 950 mm., Material: Galvanized, Size: W 500 x L 950 mm.

Stock number: D1035, Lamella conveyor, stainless steel,, mounted with plastic lamella band., L 2600 x W 190 mm., Without motor/gearbox., Material: Stainless steel AISI 304, Dimensions: L 2600 x W 190 mm.

Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern

Height from floor to lifting hook: 5 meter Horizontal movement of hoist: 6 meter Kind of: jib crane Capacity: 1500 kg

• Belt width 315 mm • Belt, white • Radius of belt inside 135 mm / outside 450 mm • Height of belt approx. 820 mm, adjustable • Drive SEW SF 40 0.37 kW 240/400V variable speed gearbox 1:11.88

Demag 3,2 ton x 20 meter

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: mm : kg height adjustment: 750 - 1100 mm weight of the machine ca.: 0,80 t dimensions: 2,0 x 0,55 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.