converting paper roll used for sale

Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes but the machine is sold with new tapes. - Belt width 64cm - with reel - With digital computer control

Slewing Bearing, Swivel Bearing ROLIX Type: 08 0260 00 zz00 A No. 0430 middle bearing diameter: 260 mm Inner diameter: 190 mm Outer diameter: 329 mm without toothing sealed with rubber New ! Dimensions: 330 x 330 x 50 mm

for sale is a roller from Bomag, 40 operating hours, Subject to prior sale, changes and errors!

Miwe rack oven Type: Roll-In RI 1 0608-TL Year of construction 2009 + 2007 with fuel oil burner Stainless steel cladding for 1x trolley 60×80 for 58x78cm trays with extractor hood and fan with drive-on ramp 400/230V 3/N/PE 50Hz Height: 269cm Width: 154cm Depth: 160cm Dimensions per piece

MIWE rack oven and HEIN proofer 1x MIWE Roll-In e+ built in 2022, with gas burner - Incl. 2 rack trolleys made of stainless steel, 8 cushions 80 x 100 cm - Incl. 4 stainless steel rack trolleys, 15 cushions 80 x 60 cm 2x HEIN TopLine Cooking Machine / Proofing Interrupter - 2 trolleys, front axle, 20 cushions, 80 x 60 cm - 2 trolleys, front axle, 19 cushions, 80 x 60 cm The oven and proofer are in very good condition. They have been regularly serviced and cared for. More pictures and information on request.

Fritsch Rollfix Pastry brake Pastry brake, total length 3000mm, belt with 600mm, roller width 630mm, with safety cage, mobile, 1Ph

INDUSTRIAL GAS TURBINE Brand: Rolls-Royce Model: 501-KB5s-DLE Maximum pressure: 1,205 PSI Condition: Pre-owned / Overhauled : Industrial Equipment Operational Period: 1999 - 2011 Total Running Hours: 39,500 hours Documentation: I am reviewing the documents and will send you the key details shortly

Model: Avon 1533-56L Year of Manufacture: 1992 Type: Aeroderivative Gas Turbine Rated power: Approximately 16,347 kW (22,225.73 hp) to 17,007 kW (23,123.08 hp) DIRECTINDUSTRY Thermal Efficiency: Up to 44% Dimensions: Length: Approx. 3,200 mm Diameter: approx. 907 mm Weight: Approximately 1,310 kg

Manufacturer: unbekannt, Type: Hubtisch mit Rollbahn, Year: ca.1990, FREETEXT1: Hubhöhe ca.800 Oberkante Rolle, FREETEXT2: Rollenbreite 800, FREETEXT3: Rollendurchmesser ca.60 mm, FREETEXT4: Hubbühne mit Fahrwerk, FREETEXT5: Pumpe im Hubtisch, FREETEXT6: Hubtisch mit Fahrwerk, Year :ca.1990

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Manufacturer: Transport Rollengang, Working length mm: 2500, Working widht mm: 800, Durchmesser Rolle mm: ca 80, Anschlaglineal link und rechts (ohne verstellung): yes, : ohne Antrieb,

Manufacturer: Hackemack Transportrollengang, Type: Rollgang, Year: ca.1990, Working length mm: 2100, Working widht mm: 1460, Engine power kW: 0,5, Durchmesser Rolle mm: 60, Rollenmittenabstand: 140, Wellendurchmesser: 25, angetrieben über Rundriemen: yes, Total hight mm: 890 +- 50, Total hight mm: 890 +- 50, Feeding speed continous adjustable: yes, Year :ca.1990

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Homag, Type: Rollendruckzone, FREETEXT1: Länge ca.1000 mm, FREETEXT2: 16 Stück Druckrollen gefedert, FREETEXT3: Verstellbar, FREETEXT4: Rollen Gummierung defekt,

Manufacturer: Roma Rolltor Kunststofflammele, Year: ca2000, FREETEXT1: mit Antrieb , FREETEXT2: Kunststoflamelle, FREETEXT3: 2 Führungschienen<CRLF>3380 mm, FREETEXT4: Rolltorhöhe 3380 mm, FREETEXT5: Rolltorbreite 3340 mm, Year :ca2000

Tol measurements: . 0 weight max.: . t range L-W-H: . mm The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply.about usmore than 400 of our own machines in stockover 15,000 m² storage area, crane capacity 70 tmore than 10,000 items accessories for your workshopIf you want to sell machines production lines or your business, please contact us.you will find further offers on our website.viewings are possible by arrangement.we look forward to your visit.your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIWE rack oven Roll-in Medio Baking tray size 60 x60 electrically heated Heating capacity 41.7kw Control DUS

Manufacturer: Kraftanlagen Heidelberg Machine type: KK 75 FW Year of Make: 1990, 2018 Renewal 2018 Control & safety technology renewed Specifications: Roller arrangement: «F» Number of rollers: 4 Roller width: 2500 mm Roller bale diameter: 750 mm Drive power roller 1-4: 98 kW Roller speed: 2.5 – 50 m/min Roll gap adjustment: cylindrical worm gear Roller heating: hot water Plant control: Retrofit 2018 - LAE Engineering The calender line is offered, if you are interested with the Buss kneaders, including unwinding, calender rolling mill and winding. The calender was used for the production of homogeneous and reinforced PVC-P waterproofing films. Ongoing investments made in recent years. Among other things: 2018 Retrofit of the entire control technology line (excluding winders) 2018 Investment in safety equipment 2018 Investment in exhaust air 2019 Edge cutt ...

Motorised roller table 19.3000mm year 2007 consisting of: 2 x roller tables 1300x6000mm 1x roller table 1300x4000mm 1 x roller table with longitudinal roller guide 1300x 3300mm Working width 1,300 mm Frame: painted steel frame Castors: 30 mm plastic disc castors, white Roller spacing: approx. 50 mm Stopper: spring-loaded disc stopper Legs: adjustable H-legs, height descending 900>800 mm adjustment +100 mm CE documentation ADDITIONAL: Frequency inverter for speed control

pressure: 0,2-40 t max. workpiece diameter: 70 mm threading length: 120 mm Control: total power requirement: 29 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shipping weight: ? kg Packing: 1200 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used rack oven Miwe Roll-in RI 1.0608-TL electric, overhauled, with hood, with touch display, electrical, electrics rewired, new seals, circulator restored, 72.6 kW, 400 V, 50 Hz, Ser.-Nr. 47 707 Pictures during the overhaul. For newer pictures, please ask.

Heidelberg roller feeder, machine number 160612, machine is in good condition, immediately available Iebr Sevvifieb Ta Eoau If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Rack Oven Miwe Rollin RI 1.0608-TL Electric A used rack oven Miwe Rollin electric 60x80 built in 2008 with 2 rack trolleys is currently for sale and immediately available in stock. Rack oven Miwe Rollin RI 1.0608-TL 60x80 Electric - Electric rack oven Rotary oven - Miwe Rollin 60/80 - for 58x78cm trays - Optionally with rack trolley - With drive-on ramp - With Miwe control - Nominal consumption : 72.6 kW - Year of construction 2008 More information and pictures on request

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

pressure: 20 - 300 kN adjustment of rolling slide: 50 mm diameter of rolling spindle: 120 mm roll spindle height over machine bed: 200 mm Control: SIN 840 taper length of the roll spindle: 200 mm rolling spindle turning speeds: 0 - 50 1/min torque per rolling spindle: 2700 Nm power capacity: 2 x 8,4 kW distance between rolling spindles: min. 271 / max. 368 mm rolling tool outer diameter: max. 300 mm total power requirement: 26 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling Promot loader cell Complete housing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Office chairs on 5 castors mi GS Condition New Purchase value 680,- +19 % VAT Immediately available in Blue - Black - Beige -Violet

MIWE rack oven Roll-In e+ RI 1-0711-TL -in mint condition- - with gas burner - Connected load: 2.6 kW - For trolley sizes 60 x 100 cm or 60 x 80 cm - Incl. 2 rack trolleys made of stainless steel, 8 cushions 80 x 100 cm - Incl. 4 stainless steel rack trolleys, 15 cushions 80 x 60 cm - Condition: Very good, as good as new - Ready for immediate use The stove is in very good condition. It was hardly used and is being sold due to closure. More pictures and information on request.

Number of floors: 7 Einsätze Width of floors: 1000 mm Depth of floors: . mm height: 1950 mm depth: 600 mm width: 1050 mm Roller shutter defective The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table sheeter Fritsch Mini 520 0.5Lx0.5L Year of manufacture: 2013 Machine technically checked-cleaned with dry ice. Belts have signs of wear. Machine tested

Used dough sheeter FRITSCH, type: Rollfix 600 / 650 EMA 1.6K x 1.4K ALI -In bakery condition- - Computer control with touchscreen - USB and Ethernet interface - Automatic belt travel left - right - Band length: 1.6m and 1.4m - Automatic roller position - Automatic flouring - 100 programs can be stored - 18 degrees of reduction of the rollers - 8 freely programmable special reduction curves - Belts are in very good condition - Condition: Good, everything technically tested and ready for immediate use Specifications: - Roller spacing: 0.3 - 45 mm -El. Connection: 3x 400 V, 50 Hz, 3 Ph, 1.4 kW, 3.4 A - Strip width: 650 mm - Rolling speed: on outfeed conveyor 56m/min. - Weight: approx. 375 kg Viewing and test run are possible by arrangement.

grinding length: 7500 mm grinding width: 1400 mm workpiece height: 1700 mm column daylight: 1850 mm table surface area: 7705 x 1250 mm workpiece weight: 15 t table speed -stepless-: - m/min grinding motor: - kW turning speeds: - U/min total power requirement: - kW weight of the machine ca.: 72 t dimensions of the machine ca.: - m Machine is equipped with: - Double grinding head -- Grinding wheel on the right and left of the main spindle -- Each side can be swivelled through 90° -- Thanks to the special grinding head, there is no need to change or profile the grinding wheel when prism or V-groove grinding - Separate underhand grinding support - Automatic grinding wheel dressing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used wagon furnace system with 2 x wagon furnace Heuft Vulkan Thermo-Roll VTR 10.19,0.09 and 1 x boiler Heuft HK 200, Fabr.-Nr. 13 C 582, with 3 trolleys 60 x 100 cm per oven, 9 shelves per trolley/oven, shelves each 18.5 cm high, with br. Weishaupt oil burner, external dimensions per oven: 170 cm wide, 325 cm deep, 260 cm high, outer dimensions kettle: 105 cm wide, 170 cm deep, 200 cm high, in baker's condition, ran perfectly until the end

A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.

Total Bakery Three roll sheeter 2020, stainless, three roll sheeter, mounted on stainless conveyor, roller width 230mm, variable speed rollers and variable speed conveyor, on mobile frame, 3Ph

Key data: 400 mm, 400 mm

1 Fixed stick/steady rest with roller quills for SUI 80 As good as new 400 mm passage

Roll Fed OPP Hot-Melt Labeler Rollmatic 540 – High-Speed Rotary Labeling Solution for Cylindrical Bottles The Rollmatic 540 roll-fed automatic rotary labeler is a powerful, high-performance rotary OPP labeling machine engineered for seamless wrap-around label application on cylindrical containers. Designed and manufactured for industrial bottling lines, this system applies plastic film OPP labels using hot-melt adhesive applied to both label ends for a clean, durable, and precision-aligned finish. Labeller has one dual-roll label feeding station for film reels, roll change is manual. The plates are rotated by a toothed belt, ensuring smooth and consistent motion. For precise label application, the machine is equipped with an alignment system that automatically corrects even the slightest deviations, keeping the film perfectly horizontal. The machine is supplied with change parts  ...

MOBERT Roller Bag maker 110 6M, for OT bags-in-a-roll with paper band, working on 2 or 3 lanes with gummed paper sleeves., Bag sizes:, Hight range 250-1500, Width 2 lanes from 150 to 460, Width 3 lanes from 150 to 300, Length 2 lane range 150 - 425, Length 3 lane range 150 - 280, Maximum speed 250 rpm, Main unwinder material width 620 - 1650 mm., Outer reel diameter 900 mm., Inner reel diameter 76 mm., Machine dimensions 11.000 x 3.650 x 2.400 mm., 380 V - 50 Hz, Constructed in 1998, excellent conditions, availability: immediate, working width: 1.100 mm., conditions: excellent, running, type: bags-in-a-roll

6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen

Information about the machine Machine type: Sidel Rollquattro F15 Machine Number: 4129 Year of Make: 2011 Operating hours: 36,484 hours Capacity (nominal capacity): 26,000 bottles/hour Technical data The Sidel Rollquattro F15 is a high-performance labeller designed to handle different bottle sizes and shapes. It offers reliable and accurate roll-fed labeling with a nominal output of 26,000 bottles per hour. Key features Suitable for PET and glass bottles Precise roll-fed labeling High cost-effectiveness and operational reliability Spare parts A wide range of spare parts is available for the machine. Spare parts can also be offered separately on request. Available spare parts (examples): Control Components Labeling units Sensors and Drives A full list of available spare parts can be provided upon request. Condition of the machine The machine is i ...

The GERNEP Rollfed 24-1056 2RA from 2013 is a reliable roll-fed labeller for PET and glass bottles with high production capacity. With 24 stations and 2 gluing units, it enables uninterrupted operation and precise labeling. Particularly suitable for the food and beverage industry.

General SKU214X079 MakeCollin LocationBarneveld TypeW110 AP x 350 Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variatorcheck 3-36 rpm With temperature controlcheck 20-270°C Electrical heatingcheck Information No.1130-25-08 Year of construction2008 With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm :Mixing millsIQAP TechnologiesPlastic machinery > Mixing millsBrand > IQAP Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

hello for sale 2 units turbine in trailer Technical Specifications Model: Rolls-Royce Allison 570KA Year of manufacture: 2005 Fully overhauled: 2012 Commissioned: 2016 Operating hours since 2016: Only 81 hours Fuel type: Gas Power output: 4,400 kW Mounted on trailer: Yes Additional trailer: UPS trailer included Location: Paris, France loaded now Availability: Immediate Documentation: Complete (technical & maintenance records)

BELLAFORM Model RA200 Rim Roller: With driven infeed Conveyor.3 x Driven Feed Rubber Rollers for positive feed to the Heating Chamber.3 x Guide Rods water cooled, to guide Cups inside the Heater ChamberEnclosed IR-Heating Chamber Capacity 18.5 kW, Heaters with Temperature Controls.3 x Tempered Driven Brass Screws to Roll the Rims. Length of each Screw - 200 to 500 mm, depending on the Product, Screw speeds upto 850 rpm continuously variable.Cup dias. Ø 60 to 100 mmOperator Control Panel.380 V 3 ph 50 Hz Video shows the Rim Roller working Inline with a ILLIG RD70K but it will also work Inline with a ILLIG RDM75K or any another Cup Thermoformer !

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

length: ca. 1500 mm width: ca. 700 mm height over floor: ca. 840 mm : 2 St. With 2 drawers, interior height approx. 140 mm and 2 storage compartments, door height approx. 380 mm Mobile on casters, casters can be lowered so that the table remains stable when working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU362X851 MakeCOLLIN Type3-Roller Calander: calander type 250 × 600 No.4490-07-06 Year of construction2006 Mounted on framecheck Main Features Motor46 KW Width600 mm Specified Features - Mixing mill MaterialHardened Tool Steel Mixing mills Roll width600 mm (nominal 500 mm) Roll diameter252 mm Rolls can be heated/cooledcheck (roller 2&3) 9 kW: 320 °C With variable speed drivecheck Roll speed± 8,6 rpm Rolls can be adjustedcheck 0—2 mm With hydraulic unitcheck With motorcheck MotorServo motor nominal power 1.4 kW (per roll drive): unwinder 0.24 kW: winder 0.24 kW: hydraulic pump 2.2 kW: oil cooler 0.25 kW: heating 9 kW per heated roller Information LocationBarneveld With switchcheck With switchgearcheck Floorspace3,12 x 1,8 m Total height3,16 m Weight3500 kg CEcheck Extra Specifications Application: finishing/planishing of foil materials up to 2 ...

Used Used Krones labeller Roll-Fed 12.000 bph: Year: 1995 Condition: Good Used Krones labeller Roll-Fed 12.000 bph: Model: Contiroll Year: 1995 about Speed: 12.000 BPH Direction: Clockwise 15 heads Mechanical cam plate 1 station Type of station labeling: roll fed Safety protections Code: EA 665 More details: https://bottlingscout.com

Used Used Labeller Sacmi Roll-Fed Opera 200 RF: Year: 2006 Condition: Good Used Labeller Sacmi Roll-Fed Opera 200 RF: Model: OPERA 200 RF Year: 2006 Speed: 20,000 BPH Clockwise direction parallel infeed/outfeed Head adjustment: electric (with button) Number of plates: 15 Plate movement with mechanical cam 1 roll fed station with automatic splicing system Safety protections Code: EA 662 More details: https://bottlingscout.com

Used Used labeller P.E. Roll-fed PET: Year: 2007 Condition: Good Used Labeller P.E. Roll Fed | PET Year: 2007 Speed: 30.000 BPH Direction: American (Parallel) Model: ROLLMATIC N Number of heads: 24 Heads Nr.1 Roll Fed Station Bottle formats: 0.5 LT | 1.0 LT | 1.5 LT Safety protections Code: EA 581 More details: https://bottlingscout.com