converter used for sale

Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Riello: Sentinel Dual UPS UPS system SDH 1000 -Connection: 220-240 V/50/60 Hz -Power: 1000 VA/900 W -Dimensions: 425/170/H435 mm -Weight: 37.3 kg

Power supply, converter, converter, power supply unit, Smart-UPS, spare battery -APC: Back-UPS HS 500 -Connection: 230 V/50-60 Hz -Active power: 300 W -Apparent power: 500 VA -Price: per piece -Number: 3 pieces -Dimensions: 375/225/H105 mm -Weight: 7.1 kg

Power supply, converter, converter, power supply unit, Smart-UPS -APC: Smart-UPS 1000 -Uninterruptible power supply -Connection: 220-240 V/50/60 Hz -Price: per piece -Number: 4 pieces -Dimensions: 435/170/H215 mm -Weight: 20 kg

Transformer, three-phase power transformer, current converter, current converter -Transformer: Ruhstrat DRTKDEM -Primary: 3 380 V -Secondary: 3 0 - 380 V -kVA: 3.3 kVA -Dimensions: 340/250/H170 mm -Weight: 18.5 kg

Power supply, converter, converter, power supply unit -Type: AS-i Power Supply AC1218 -Input: 3AC 400 V -Output: DC30.5V/8A -Number: 4x power supplies available -Price: per piece -Dimensions: 125/90/H110 mm -Weight: 0.9 kg

Transnorm belt curve conveyor left GKF 180°-1170-1000-IR1200 -- NEW RA1944 Technical data: Conveying length middle radius (NL): 5340 mm Frame width (NB): 1170 mm Frame width with Bearing cover: 1290 mm Frame width with Bearing cover and gearbox: 1380 mm belt width (GuB): 1000 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1170 Belt width in mm: 1000 angle: 180° Driven ...

Transnorm belt curve conveyor left GKF 180°-1270-1100-IR1200 -- NEW RA1945 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven ...

Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 -- NEW RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Drive ...

Transnorm belt curve conveyor right GKF 180°-1170-1000-IR1200 RA1964 Technical data: Conveying length middle radius (NL): 5341 mm Frame width (NB): 1170 mm Frame width with Bearing cover: 1290 mm Frame width with Bearing cover and gearbox: 1380 mm belt width (GuB): 1000 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1127 Belt width in mm: 1000 angle: 180° Driven: YES  ...

Transnorm spiral helix belt curve conveyor left 90°-800-700 IR900 RA2141 Technical data: Frame width (NB): 800 mm belt width (GuB): 700 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DRS71S4BE05/MM05/LN Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2014 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2014 condition: good (used) Driven: YES Nominal / inner radius in mm: 900 Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter Co ...

Dematic Heavy duty Belt Conveyor GF 1520-760-650 RA2027 Technical data: Conveyor length (NL): 1520 mm Framework width (NB): 760 mm, 1110 mm with motor and movi mot belt width (GuB): 650 mm height (BH): 140 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1520 Nominal / outside width in mm: 760, 1110 Belt width in mm: 650 Driven: YES Engine type: SEW Movi-Mot KW: 0,55/S1 Conveyor speed m / s: freely adjustable, 0,025 - 0,883 scope of delivery: without supports and side guides, includ ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Blume roller conveyor continuous weighing scale 1880-910-600 RA2046 Make: Blume Roller width (RB): 600 mm, Steel rolls Nominal/outer width (NB): 910 mm length: 1880 mm Rolls diameter: 50 mm Roller distance 80 mm Overall height: 900 mm 3x 24V Interroll drum motors Conveyor speed: freely adjustable with frequency converter between 0.22 and 0.65 m/s maximal load: 220 kg Scope of delivery: with supports, USB converter Optionally available: Side guides on one-sided or both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2012 Electric data: 24V Interroll, 220-240 condition: very good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 910 Roll width in mm: 600 Roll division in mm: 80 Driven: YES scope of delivery: including supports without side guides For individual, professional advice, simply contact us. ...

MOSCA alignment conveyor inclined roller conveyor 2010-610-535 RA2031 Make: MOSCA Year of manufacture: 2008 Roller width (RB): 535 mm Nominal/outer width (NB): 610 mm Length: 2010 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: NORD drive motor with frequency converter frame height set: 840 Conveyor speed: freely adjustable with frequency converter between 0,3 m/s and 0,83 m/s Angle rollers: 6.4° Optional: Logo control Side guide adapted conveyor speed range Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2008 condition: gut nominal voltage: 230 angle: 6,4° Conveying length in mm: 2010 Nominal / outside width in mm: 610 Roll width in mm: 535 Roll division in mm: 60 Driven: YES Engine type: Nord Conveyor speed m / s: 0,3 - 0,83 scope of delivery: inklusive Frequenzumrichter, including supports  ...

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module, control unit -Manufacturer: Robosoft, control unit from press brake HACO type PPES 30135 -Type: 411-1153 see photo nameplate -Dimensions: 295/190/H145 mm -Weight: 2.5 kg.

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module, control unit -Manufacturer: Robosoft, control unit from press brake HACO type PPES 30135 -Type: 411-1084 / 412-0112 / 412-0094 see photo nameplate -Dimensions: 295/190/H145 mm -Weight: 2.5 kg.

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a resonable mechanical condition but with almost new controls with frequency converter (renewed in 2020 by Elesto Austria with new Siemens S7-1200 PLC, touchscreen panel and CE declaration). The format on the machine is stick pack 100 and 250 gram, 100 x 37 x 30 / 75 mm, side folding. The butter is feed with an aluminium through with aluminium augers. Stainless steel dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter. Outfeed conveyor of 150 cm. Semi automatic case packer Benhil 8538 (year 1976, serialnumber: 538/1) for 2,5 kg boxes wi ...

Specifications: Workpiece length: min 200 mm Workpiece length: max 3050 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 12 mm (for horizontal machining on the two transverse edges and on the upper edge), Note: When drilling horizontally from the lower edge, central drilling is only permitted up to a workpiece thickness of 19 mm. max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 50 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces. Drill gear V13 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2,800 rpm Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-chan ...

ID3088 Fiebig E500 year of construction approx. 1990 Scoop wheel, diameter 5,000 mm, cup width 700 mm, 22 cups, geared motor brand HUEBER year of manufacture, 1996, 4 kW, frequency converter available Bucket wheel, diameter 5,000 mm, bucket width 700 mm, 22 cups, geared motor brand HUEBER built in 1996, 4 kW, frequency converter available

Lippert belt conveyor ascending belt GF 4920-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4920 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Dri ...

General SKU205W061 LocationBarneveld MakeHosokawa Micron Type06-VB-01 No.6045502000 Year of construction1997 Main Features MaterialStainless steel Volume72 Ltr. Motor1.1 KW Specified Features - Conical mixer MaterialStainless steel 1.4306 (304L) Density0.6 kg/dm³ Conical mixercheck Capacitynetto 72Ltr. with liquids, netto 60Ltr. with solids Dished topcheck With stainless steel armcheck Top drivecheck Motor1,1kW With variable speed drivecheck with frequency converter, 39-156 rpm Motor0,18kW With variable speed drivecheck Cantilevered screwcheckwith frequency converter, 1,3-5,2 rpm Bottom dischargecheck Outlet with sliding valvecheck Polished insidecheck Suitable for liquid/pastecheck Information Mounted in framecheck Weight350 kg CEcheck With switchgearcheckConical mixersHosokawa MicronMixers > Conical mixersBrand > Hosokawa Micron What you can expect fro ...

Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: RAM, temperature controller type 320.012 -Temperature range: 30 to 130 °C -Quantity: 2 controllers available -Price per piece -Dimensions box: 90/80/H50 mm -Weight: 0.2 kg

Specifications: Workpiece length: min 200 mm Workpiece length: max 2500 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 16 mm (for horizontal machining) max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 30 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces Drill Gear V8 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2800 1/min, frequency controlled Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle spacing: 32 mm Spindle type: individually controllable power control PC85  ...

Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2022). The format on the machine is 250 gram, 100 x 75 x 35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil on  ...

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 500 gram, 125 x 75 x ±56 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 70 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 250 gram, 100 x 75 x ±35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

Material: 1.4301/ stainless steel Engine: 55 kW Content: 4600 ltr Weight: 4600 kg General overhauled. Equipment: - control cabinet - frequency converter variable 450 - 1450 rpm - filtering screen - discharge pump - working platform with stairway, base plate for 1 Euro-pallet, standard railing and grates. Very good condition, like new. You can also get the entire system with all components you need. Write us below!

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Q Ferquenzumrichter 140kVA ABB - AV GmbH ACS607-0140-3 Fig. 4 quadrant converter (Rückspeisefähig!) compl. built in switch cabinet. Dimensions H = 2010 T = 640 B = 1200 (2-door). Technical data: Eingangsfreq. 46.63 Hz Ausgangsfreq. 0.. 300 Hz U = 380TH. 415V IP21 (Cabinet) Wiring diagrams available ABB Manual: ABC://abc05.ABB.com/global/Scot/scot201.nsf/veritydisplay/fdc8e06693b9 114ac2256df0003fe70e/$file/en_6047hw_5d_scrres_plus_update_note.PDF Net price in FU Wardrobe (2 PCs.) 6,500 Questions under 0170 / 2204056 or fa.raupp@t-online

Frequency converter soft start 8.3 kVA SEW Movitrac Used frequency inverters, approximately 3 years in operation, increasing the engine power, currently no longer in use. Unit tested and fully functional. Technical data: f input = 50-60 Hz f output = 0-400 Hz power 8, 3kVA in = UE = 380-500V 12A UA UE = No guarantee you can return but within according to the FU 10 business days and we will refund the purchase price. Information at 0170-2204056 or fa.raupp@t-online

GLIMEK Dough Divider SD-180 - exhibition machine, brand new condition, year of manufacture: 2024 - working range 50 - 1.000 g, 120 - 1.600 g or 180 - 2.300 g, capacity range 750 - 1.800 pieces per hour, frequency converter drive for infinitely adjustable machine speed, 90 liter hopper made from stainless steel, machine covers made from stainless steel, mechanical flour duster made from stainless steel power supply: 1.1 kW, electrical supply: 400V/50-60Hz/3~

Cat.-No. 13-0291 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 6,0 bar capacity: 6600 litres/h motor: 220 V, 380 A, 3,0 kW Connection: inlet/outlet: DN 80 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely via frequency converter Measurements and weight: length: 1200 mm width: 400 mm height: 1050 mm weight: appr. 250 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

CARVING machine type MARIANI PL 8 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.8 spindles distance betwen spindles mm. 420 n.02 rotation speed of spindles rpm 9.000 / 12.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5000 x 2800 H=mm.1500 ( machine assembled ) Volt. 380/50

Used line for the production of the co-extrusion by PST Forming method. PTI - The twin screw extruder DS 92/28   2x screws with a diameter of 92 mm The length of screws 28 x L / D Snails closed system with internal temperature control, deep nitrided, with degassing on the cylinder, extruder equipped with a vacuum pump with filter, Siemens Servo Motor power: 60 KW Torque: Nm 15700 Screw rotation: 0 - 50 rev. / Min. Zones with ceramic heaters with an intense cooling: 5 x 5 KW Cooling Zones: 4 Performance with hard PVC, depending on the materials and tools: max.600kg / h Length: 4500 mm Width: 1600 mm Height: 2300 mm           Extruder equipped with a microprocessor control SIEMENS type Extrusion Pro Pak visualization 2. Co-Extruder PTI - The twin screw extruder DS 68/28 Snails with a diameter of 2 x 68 mm Length of the screws: 28 x L / D Snails cl ...

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you fin ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional  ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machi ...

CARVING machine type ANDREONI STANDARD AL 12 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.12 spindles distance betwen spindles mm. 300 n.02 rotation speed of spindles rpm 12.000 / 18.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5100 x 3100 H=mm.1500 ( machine assembled )

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...

GLIMEK Conical Rounder CR-400 GM - exhibition machine, brand-new condition, year of manufacture: 2022 - weight range 30 - 2.000 g, capacity range up to 3.600 pieces per hour, centrally adjustable track system, non-stick coating on cone and tracks, infeed at 6'00, outfeed at 12'00, track base plates made of food safe plastic, frequency converter drive for the cone speed, hot and cold air blowing unit, mechanical flour duster from stainless steel, 5 m connection cable and CEE-plug, power supply: 2.8 kW electrical connection: 400V/50-60 Hz/3~