converter used for sale

Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Handover in the current condition as seen -Gear base: See photos for damage -Manufacturer: Nord, type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D frequency converter type SK 300E-151-340-B -Speed: 40 rpm i= 34.09 -Power: 0.75 kW / 1375 rpm -Motor: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Construction: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 -Total dimensions: 480/185/H305 mm -Weight: 28 kg

Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Manufacturer: Nord, type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D frequency converter type SK 300E-151-340-B -Speed: 40 rpm i= 34.09 -Power: 0,75 kW / 1375 U/min -Motor: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Construction: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 -Number: 36 engines available -Price: piece -Total dimensions: 490/180/H320 mm -Weight: 28kg

Gear motor, electric motor, electric gear motor, gear motor with frequency converter -Manufacturer: Lenze, gear motor type GST05-3E VBR 063C12 with frequency converter -Speed: approx. 8 rpm i= 179.067 -Motor: Lenze MDEMA1M063-12 -Power: 0.12kW / 1425 rpm -Frequency converter: E82MV371_2B001 0.37 kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Total dimensions: 500/250/H195 mm -Weight: 20 kg

Mains choke, mains filter, frequency converter, frequency converter, drive converter, Line Filter. Smart Line Module -Manufacturer: Siemens, mains choke line filter for 10kW -Type: MLFB 6SL3000-OHE21-OAAO -Voltage: 3AC 380-480V, 47-63Hz, 24A -Dimensions: 265/60/H120 mm -Weight: 2.3 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, thermal system -Manufacturer: Laird, Thermal Systems Thermoelectric Peltier module -Voltage: 24 VDC/3.4 A -Cooling power: 71 W. -Price: per piece -Number: 15 piece -Dimensions: 230/120/H150 mm -Weight 2.4 kg/piece

Frequency converter, frequency converter, drive converter, controller, variable speed drive, thermal system -Manufacturer: Laird, Thermal Systems Thermoelectric Peltier module -Voltage: 24 VDC -Cooling power: 71 W -Price: per piece -Number: 2 pieces -Dimensions: 230/145/H120 mm -Weight: 2.4 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, solar cable -Manufacturer: Aurora, PV inverter unused from stock liquidation ovp -Type: PVI-2000-OUTD-DE -Max. Continuous output power: 2000 W -Price per piece -Quantity: 28 pieces -Dimensions: 420 x 310 x 144 mm -Weight: 12kg/pcs

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Siemens Sinamics Active Interface Module: 36 kW -6SL3100-0BE23-6AB0 -Input 3 AC 380-480 V 50/60 Hz -for: maximum 36 kW -Number: 1x available -Price: per piece -Dimensions: 150/270/H490 mm -Weight: 18.5 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Siemens: Sinamics Active Line Module 6SL3130-7TE23-6AA3 -Max. Power: 36 kW -Input 3 AC 380-480 V 50/60 Hz -Output DC 600 V 60 A 36 kW -Siemens: Sinamics Double Motor Module 6SL3120-2TE21-0AA3 -Input: DC 600 V -Output: 3 AC 400 V 9 A/9 A -Dimensions: 200/490/H270 mm -Weight: 16 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 110/165 V 200/300 Hz -Power: 8.3/12.5 KVA -Dimensions: 750/350/H320 mm -Weight: 150 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Siemens: Sinamics S120 Single Motor Module 6SL3120-1TE21-0AA3 -Max. Power kW -Input: DC 600V -Output: 3AC 400V 9A -Number: 1 available -Dimensions: 500/50/H270 mm -Weight: 5.0kg

Transnorm belt curve conveyor 90° helix spiral left 980-800 IR600 RA2044 Technical data Manufacturer: Transnorm Type: Belt curve 90° left Year of manufacture: 1995 angle: 90 running direction: left inner radius (IR): 600 mm useful width (NUB): 800 mm nominal/external width (NB): 980 mm Pitch: 180 mm/ 90°, 720 mm/ 360° Conveying speed (m/s): with frequency converter freely adjustable between 0.0117 and 0.5167Electrical data: 1.5 kW / S1, 380-500 V Scope of delivery: without supports and side guides (please inquire if required) including frequency converter new belt optional: supports side guides Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: condition: very good (used) scope of delivery: including Movimot frequency converter, inklusive neuem Gurt, without supports and side guides Driven: YES Nominal / inner radius in mm: 600 angle: 90° Belt width in mm: ...

turning length: 1000 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5.5 kW weight of the machine ca.: 1550 kg. range L-W-H: 2100 x 1200 x 1450 mm from a training workshop good condition - new price approx. 14.000 euros Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular cont ...

turning length: 1000 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5.5 kW weight of the machine ca.: 1550 kg. range L-W-H: 2100 x 1200 x 1450 mm from a training workshop good condition - new price approx. 14.000 euros Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular cont ...

turning length: 1000 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5.5 kW weight of the machine ca.: 1550 kg. range L-W-H: 2100 x 1200 x 1450 mm from a training workshop good condition - new price approx. 14.000 euros Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular cont ...

The 5 liter trimix is intended for industrial use for the preparation of gels, creams, ointments requiring dispersion, dissolution, homogenization, deaeration, heat exchange. The Trimix is made up of: A table frame with stainless steel casing A mixer with two pendular coaxial movements: Slow peripheral movement: Motor: Power 0.25 kW Reduction-output speed: 50 to 200 rpm Driven by frequency converter Agitation: Anchor paddle +4 articulated PTFE scrapers Double direction of rotation Slow central movement of counter agitation: Motor: Power 0.25 kW Gearbox - output speed: 80 to 419 RPM Driven by frequency converter Agitation: 3 streamlined three-blade turbines with a diameter of 120 mm A tank bottom foam concentrate type EFC 70 GMS Motor: Power 0.75kW - speed 3000 rpm Output speed: 600 to 3000 rpm Driven by frequency converter Agitation: 70mm diameter narrow slot machined rotor/stator A ta ...

Fully reconditioned Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil in the 1st cell, after cutting the foil in length, the machine will stop. The speed can be ad ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

Vibration table / table We offer: used vibration table / table Condition: good, ready for use Manufacturer: unknown Year of constr.: 1995 estimated Dimensions: Width: 3500 mm Length: 8000 mm Height: 550 mm Steel quantity: approx. 8 mm Weight: estimated 3500 kg Vibration / vibration motors: 6 pieces Manufacturer: Bosch Type: Connection data: 250 V, 3 A; 1.0 KW; 200 Hz Speed: 5700 RPM The supply of vibration / vibration motors via a central frequency converter Bosch (for 2 toggle vibration tables and 6 vibration tables. This when purchasing multiple systems can be purchased: Technical data frequency: Produced for Bosch from the Flender sky / Tübingen Type: 2 GR132/135 (poorly readable) Motor: 11 KW, 380 V, 50 Hz; 22.5 A, 2880 rpm, cos.phi 0,89 Converter sec.: 11 / 12,5 KW; 250 V, 200 Hz, 2 26, 4 / 28; 9 A Control: Bosch Accessories: 2 or 4 forms for dominoes (see photos) More ...

They are offered from a working measuring machine Electronic components and Heidenhain External impulse formers All prices VB or against bid 1st 1St Renishaw Autochange Control Unit ACC2-2 Closing at the back: Pics in ; Pics out ; RS232 ; CMM ; Rack Price 890.-EUR 2. 1 Pcck Renishaw Probe Head Controller PHC 10 Serial K14908 Connection at the back: output ; IEEE ; RS232 ; Head ; PHD10 Price 490.-EUR 3. 1 Pcs Renishaw Sample Interface Price 490.-EUR 4. 3 Stueck Heidenhain External Pulse Converter Electronics (Measured value converter) EXE 610 C with manual Price 190.-EUR / Stck Special price

Stock - No.: 2166 1 used, in 2019 partly overhauled and tested film/foil/regrind pelletizing extrusion line EREMA type RGA 50 T equipped with: 1. cutter / densifier unit, new motor with 18,5 kW tangential ( T ) cutter - Ø 550 mm 2. Extruder single-screw Ø 50 mm – 20 LD motor 18,5 kW – NEW Frequency Converter 3. screen pack changer sieve- Ø90 mm with hydraulic unit-new 4. watering-granulation unit HG, pelletizer drive 0,75 kW 5. pellet drying vibrating dewatering unit GS 1000/200 6. control board ( new converter ) The line is ready for operation, date shortly in our workhsop Wuppertal-Germany. More regranulation-pelletizing lines ex stock available, ask for our actual machine-list or visit us

McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.

We offer high-performance automatic vacuum can seamer based on Ferrum F240,F506G, F706G, F708G(4,6,8 heads) beverage seamer. The basic machine has been completely upgraded and adapted for vacuum food cans. These seaming machines are affordable relativle fast avaible and reliable for long time. Capacity from 350 to 750 cans/min. Lid diameter from 53 to 102 mm Can diameter from 50 to 99 mm Can height from 35 to 120 mm Standard equipment: • With progressive pre-vacuum feeder • With complete seaming tooling • With lid feeding system into the vacuum chamber • The machine has variable speed with frequency converter control • Independent synchronized infeed with frequency converter control • Main Electrical Control Cabinet INOX • Vacuum pump connection and controlled by main cabinet - Speeds below are guaranteed regardless of the type of the lids (standard NEO, ea ...

Vertical axis basket centrifuge with discharge from above with bag mounted on three feet (with straps and compression springs) of second hand. Model FT-12-BG manufactured by COMTEIFA. All parts in contact with the product are made of 316L stainless steel. General characteristics: Maker COMTEIFA Model FT-12-BG Guy Vertical axis basket centrifuge with discharge from above with bag Material Stainless steel 316L Variable speed per frequency converter. Total opening. All parts in contact with the product are made of AISI 316L stainless steel. Mounting on very strongly sized roller bearings. Box of casting bearings. Electric stop brake made by the converter. Stainless steel cap AISI 316L piston movement compensated by spring. Specifications: Discharge Manual above with bag Basket diameter 1,200 mm Basket height 650 mm Maximum permissible load 450 kg Payload 350 d ...

USED COMTEIFA FT-12 BG CENTRIFUGE REF#: C5613 Used vertical axis basket centrifuge with upper discharge with filtering bag mounted on three feet (with compression straps and springs). Type FT-12-BG manufactured by COMTEIFA. AISI 316 SS wetted parts. General characteristics: Manufactured by COMTEIFA Model FT-12-BG Type Vertical basket top discharge centrifuge Material Stainless steel 316L Variable speed by frequency converter. Total opening All parts in contact with the product are made of AISI 316L stainless steel. Mounting on very strongly sized roller bearings. Bearing house of cast iron. Electric stop brake made by the converter. AISI 316L stainless steel lid with spring-compensated piston movement Technical characteristics: Download Manual above with bag Basket diameter 1,200 mm Height basket 650 mm Max. load 450 kg Useful load 350 dm3 Max. rotationa ...

A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Siemens S 7, as well as for the Entire electrical supply with 5 wall control cabinets for pneumatic cabling housed in 5 control cabinets, with various smaller frequency converters and 1 frequency con ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3.650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band sa ...

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

Burton 11 A knotting machine; good condition; cleaned and tested; engine overhauled; new frequency converter; with accessories. Knot machine Burton 11 A; good condition; clenaed and checked; motor rebuilt; new frequency converter; with accessories.

Kannegiesser GF800/5500 80 cm belt conveyor 5.5 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor has a motor, with frequency converter to regulate the conveying speed. The supported supports shown can also be used as support feet for standing use. This belt conveyor is specially designed for applications that require a powerful drive Belt conveyor GF800/5500 Belt width: 800 mm Band length: 5500 mm incl. support feet Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!

Kannegiesser roller curve conveyor 90° roller conveyor 60 cm The Kannegiesser roller curve conveyor is in very good condition. The roller conveyor has a motor, with frequency converter to regulate the conveying speed. The supported supports shown can also be used as support feet for standing use. Roller curve conveyor 90° Roll width: 600 mm Total width: 680 mm incl. support feet H = 635 mm +/- 50 mm adjustable Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!

Kannegiesser Diagonal conveyor belt 75 cm Belt conveyor 5 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor has a motor, with frequency converter to regulate the conveying speed. The supports shown can also be used as support legs for standing use. This belt conveyor is specially designed for applications that require a strong drive Strap width: 750 mm Belt length: 5000 mm incl. support legs Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw ...

Kannegiesser Diagonal conveyor belt 75 cm Belt conveyor 4 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor has a motor, with frequency converter to regulate the conveying speed. The supports shown can also be used as support legs for standing use. This belt conveyor is specially designed for applications that require a strong drive Strap width: 750 mm Belt length: 4000 mm incl. support legs Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 1980 Running direction: Left – right Pitch: 95 mm Siemens S7 controller, Danfoss frequency converter With a stainless steel control cabinet. Equipped with 3 sets of parts for the following bottles: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP capable. With electric height adjustment. Modernization and service by arrangement. The machine is in good condition and still in operation. A visit is possible by arrangement Year of construction: 1980 Working direction: Left – right Pitch: 95 mm Siemens S7 control and a Danfoss frequency converter. Installed in a stainless steel switch cabinet. Equipped with 3 bottle guiding parts for: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP able. Height adjustment of the filler bowl and closing machine by electrical gear motor. Reconditioning /  ...

Telemequanice frequency converter, ATV18D16N4, 11kW - top condition. For sale is a used Telemecanique frequency converter. The device is in very good condition and fully functional. The technical data can be found on the nameplate (see photos). We will be happy to answer any further questions you may have about the goods. Yours sincerely, Your M&E Trading Team Information about the seller: We, M&E Trading GmbH & Co. KG, are a long-standing dealer in the field of used food technology, specializing in the dairy industry. We now have satisfied customers in over 27 countries on 6 continents around the world. We are a 5⭐️ company on GOOGLE and have the Trusted Seal on the trading platforms TradeMachines, Machinio and Resale. We would be happy to prove to you that we are a reliable business partner.

Siemens Micromaster 440 frequency converter 132/160 kW The Micromaster 440 inverter is suitable for a wide range of variable-speed drive applications. Its flexibility allows for a wide range of applications. It also includes cranes and hoists, high-bay warehouses, food, beverage, and tobacco production machinery, packaging machinery, etc.; In other words, applications that require higher functionality and dynamics of the frequency converter than usual. The inverter is particularly characterized by its customer-oriented performance and user-friendliness. Its wide mains voltage range allows it to be used worldwide. - Simple, guided commissioning - Modular design allows maximum configuration flexibility - Low-noise motor operation due to high pulse rates, adjustable (note derating if necessary) - Protection for motor and inverter - EMC filter, class A/B option - Latest IGBT t ...

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

Kannegiesser 75 cm Belt conveyor 5 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor has a motor, with frequency converter for regulating the conveying speed. The supports shown can also be used as support feet for standing use. This belt conveyor is specially designed for applications that require a strong drive Belt width: 750 mm Belt length: 5000 mm incl. support feet Connection voltage: 400V Engine Conveying speed (v m/s): adjustable up and down with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!

Capacity range: 600 l/h, Pressure: 250 bar, Cellular particle size: 1 μm cellular particle, Length: ca. 2,2 m, Width: ca. 2,5 m, Height: ca. 1,9 m, Variety / Product: Hops; can also be used for milk if extended to 2 levels., Operation / Control: Was integrated in a ProLeit process control, the motor was controlled by an external frequency converter. Frequency converter can be added., Features: CIP-able, SIP-able , Code: 1389

Power supply, converter, converter, power supply unit -Type: PE 1980/20 U -Input: 220 VAC -Output: 5 VDC 200A -Dimensions: 200/320/H130 mm -Weight: 8.5 kg

Exellent working condition capacity 600 - 800 Liter mixed cream per hour. The mixing machine is based on a manual method of mixing dry ingredients into a fluid. A constant flow of incoming (aerated) fluid is needed. The capacity of the hopper/feeder is frequency controlled even as the mixing speed. Composed of a Rotor-Stator mixing head with pins -Injection of dry product -seeds -into a liquid for controlled mixing and dosing ▪All stainless steel ▪Useful capacity up to 600/800 kg / hour depending on the ingredients GENERAL - Type : M-750 - Machine number : 975.107 - Year : 2010 - Electrical connection : 230 V, 50 Hz - Dimensions L W H : 1330 950 1200 mm - Weight : 380 kg MIXING HEAD - Shaft seal : Mechanical-seal - Distance bush : 61 mm - Cooling facilities : Stator and Cover MIXINGHEAD DRIVE - Make : Nord  ...

Power supply, converter, converter, power supply unit -Type: XT40.241 -Input: 3AC 400 V -Output: DC24V/40A -Dimensions: 250/170/H140 mm -Weight: 1.6 kg

Kannegiesser GF600/5000 belt conveyor 5 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor is equipped with a motor with a frequency converter to regulate the conveying speed. This belt conveyor is specially designed for applications that require a strong drive Belt Conveyor GF600/5000 Belt width: 600 mm Total width: 680 mm Belt length: 5000 mm Belt length with bend: 5500 mm Connection voltage: 400 V Interroll Drum Motor Emerson Frequency Drives Year of construction: 01/2013 Conveying speed (v m/s): can be adjusted up and down with frequency converter More items new and used - can be found in our shop! International shipping costs on request!

Fully automatic system with 1 vibrating press locksmith BH 30 For production e.g. : - Concrete blocks, bricks, partition bricks - Soundstones -Curbs - Fireplace stones -Gutter - Ceiling stones, etc. - Stationary vibropress BH 30 with two filling parts for two-layer products - Chain conveyors for fresh side - Sliding tracks for dry side - 1x mast and 1x lowering scaffold - Kuboter for the removal of hardened stones from the return transport on the parcel transport - Production pallets 1400x800mm – 0 pcs Product height : from 55 to 550 mm The new automation : Siemens S7 The control of the vibrator with frequency converter Incl. approx. 5 pcs, different shapes Fully automatic system with 1 vibropress locksmith BH 30 for production of for example concrete blocks, wall stones, partition stoner -Sonic Stones -curbs -fireplace stones -Gutter -ceiling stones -stationa ...

BÖHL JUNIOR S-450 VA fully automatic packaging machine / wrapping machine for spiral wrapping of long goods with packaging material (typical stretch film) Product Dimensions • Width 15 – 220 mm • Height 15 – 120 mm • Length approx. 600 / 800 mm to 6,000 mm • Weight approx.max. 3000 KG / 6 meters incl. car Maximum cross-sectional diagonal of the product: 220 mm (customized) Attention: max. weight only possible if driven by the on-site roller conveyor. (A) 600 mm without trolley (B) 800 mm with trolley or distance between carriages min. 600 mm Packaging materials • PE stretch film thickness approx. 17 – 50 my (recommended 23 my) • Roll diameter max. 400 mm • Roll width max. 125 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) Specificatio ...

BÖHL JUNIOR S-450 VA fully automatic packaging machine / wrapping machine for spiral wrapping of long goods with packaging material (typical stretch film) Product Dimensions • Width 15 – 220 mm • Height 15 – 120 mm • Length approx. 600 / 800 mm to 6,000 mm • Weight approx.max. 3000 KG / 6 meters incl. car Maximum cross-sectional diagonal of the product: 220 mm (customized) Attention: max. weight only possible if driven by the on-site roller conveyor. (A) 600 mm without trolley (B) 800 mm with trolley or distance between carriages min. 600 mm Packaging materials • PE stretch film thickness approx. 17 – 50 my (recommended 23 my) • Roll diameter max. 400 mm • Roll width max. 125 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) Specificatio ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 mm capacity 45 degrees: square: li. 250 mm capacity 45 degrees: flat: li. 270 x 200 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: 330 x 260 mm motor: 2,2 kW weight of the machine ca.: 1,24 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 / re. 200 mm capacity 45 degrees: square: li. 250 / re. 180 mm capacity 45 degrees: flat: li. 270x200 re. 200x160 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: li. 170 x 170 mm motor: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from  ...

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter -Type: PXT-10.924 -Number: 2x sensors available -Price: per piece -Weight: 0.2 kg