continuous used for sale

Brake Coil Body SEW EURODRIVE BMG1 Operating voltage: 400 V AC Braking force: 10 Nm approx. 0,0,35 m connection cable opening for shaft: Ø 27 mm bolt circle diameter: Ø 37 mm 2x bore: Ø 7.5 mm, continuous Flange diameter: Ø 110 mm bolt circle diameter: Ø 100 mm 3x bore: Ø 6.5 mm, continuous 6x bore: Ø 8.1 mm, depth: 24 mm New ! Dimensions ( without cable ): 104 x 104 x 35 mm

Brake coil body SEW EURODRIVE BMG2 Operating voltage: 230 V AC Braking force: 20 Nm approx. 0,0,35 m connection cable opening for shaft: Ø 36 mm bolt circle diameter: Ø 47 mm 2x bore: Ø 7.5 mm, continuous Flange diameter: Ø 148 mm bolt circle diameter: Ø 142 / 135 mm 3x bore: 8 6.5 mm, continuous 6x bore: Ø 10.1 mm, depth: 32 mm used, tested ! Dimensions ( without cable ): 154 x 154 x 46 mm

Brake coil body SEW EURODRIVE BMG2 Operating voltage: 380 V Braking force: 20 Nm approx. 0,0,35 m connection cable opening for shaft: Ø 36 mm bolt circle diameter: Ø 47 mm 2x bore: Ø 7.5 mm, continuous Flange diameter: Ø 148 mm bolt circle diameter: Ø 142 / 135 mm 3x bore: Ø 8.5 mm, continuous 6x bore: Ø 10.1 mm, depth: 32 mm New ! Dimensions ( without cable ): 152 x 154 x 42 mm

Brake coil body SEW EURODRIVE BMG8 Operating voltage: 230 V Braking force: 20 Nm approx. 0,0,35 m connection cable opening for shaft: Ø 46 mm bolt circle diameter: Ø 62 mm 2x bore: Ø 7.5 mm, continuous Flange diameter: Ø 175 mm bolt circle diameter: Ø 160 mm 3x bore: Ø 10.5 mm, continuous 6x bore: Ø 12 mm, depth: 40 mm used, tested ! Dimensions ( without cable ): 180 x 180 x 46 mm

Brake coil body SEW EURODRIVE S66 Coil resistance: approx. 8,4 Ohm approx. 0.35 m Connection cable opening for shaft: Ø 32 mm bolt circle diameter: Ø 47 mm 2x bore: Ø 7.5 mm, continuous Flange diameter: Ø 148 mm bolt circle diameter: Ø 138 / 134 mm 3x bore: Ø 8.5 mm, continuous 6x bore: Ø 10 mm, depth: 32 mm used, tested ! Dimensions ( without cable ): 154 x 154 x 42 mm

x-travel: 10000 mm y-travel: 1600 mm workpiece height: 1900 mm distance between columns: 1859 mm table travel: 10000 mm table load: 20000 kg table speeds: 75 m/min dimension of workpiece: 1600 x 1900 x 10300 mm grinding wheel size: 630 x 180 mm spindle turning speed range: 960 U/min main drive motor: 22 kW table-size: 1600 x 10300 mm swival range +/-: 70 ° Control: Siemens 840D vertical stroke: 3000 mm vertical Stroke: 2200 mm weight of the machine ca.: 74 t dimensions of the machine ca.: - m Machine was retrofitted in 2008 with Siemens CNC, servo motor, drives and ball screw. Equipment of the machine: - CNC control Siemens 840D - Table feed speed continuous -- feed capacity: 75 kW -- motor speed: 1770 rpm -- maximum table speed without load: 75 m/min (AC motor with inverter, speed-dependent motor acceleration rate) -- speed with maximum continuous load: 50 m/min - Tangential grinding h ...

Dividing head with three-jaw chuck WMW Ø 250 mm Motor 1: Type 1213WSM2.85.08 52 - 172 V DC, 26 A Motor 2: Type MA 14 F130 - 4A 0,37 kW 220 / 380 V 3AC Three-jaw chuck: hole diameter: Ø 80 mm, not continuous ! hole depth: 70 mm flange ( dividing head ): Ø 190 mm bolt circle diameter: Ø 160 mm 4x threaded hole: M16 x 2.0, depth: approx. 20 mm center height: 240 mm hole diameter ( dividing head ): Ø 120 mm, not continuous ! used, tested ! Dimensions ( without eyebolts ): 1000 x 800 x 425 mm

Clamping angle PAGUS Clamping area: 1000 x 810 x 55 mm Bridge width: 118 / 6x 108 / 116 mm Groove width: 18 / 28 mm Groove depth: 25 mm hole spacing: 62,25 / 125 mm 80x threaded bore: M16 x 2.0, continuous mounting surface: 405 x 810 mm hole spacing: 125 / 217.5 mm 12x bore: Ø 21, continuous used, tested ! Dimensions (transport, last picture): 1200 x 810 x 405 mm

Intermediate flange for electric motor VEM K21R 80 ( K21R80 ) for design: B14K / B34K motor side: Flange diameter: Ø 80 / 120 mm bolt circle diameter: Ø 100 mm 4x bore: Ø 7 mm, continuous output side: Flange diameter: Ø 80 / 88 / 115 mm bolt circle diameter: Ø 100 mm 4x threaded hole: M8 x 1.25, continuous used, tested ! Dimensions: 120 x 120 x 41 mm

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

sheet width: 2030 mm plate thickness: 4,0 mm thickness at Niro-steel: 2,5 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, p ...

sheet width: 2030 mm plate thickness: 4,00 mm thickness at Niro-steel: 2,50 mm no. of strokes: 34 Hub/min cutting angle: 2,5 Grad table height: 820 mm distance between columns: 2340 mm Control: POS 100 back stop - adjustable: max. 750 mm engine output: 6,8 kW weight of the machine ca.: 2860 kg. range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible - Duo-Cut drive with two dynamic, ...

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

Soundproof Diesel Generator Set Emergency Generator Set Manufacturer: Lucla Type GLU-33-SK Specifications Continuous power: 30 kVA Standby power: 33 kVA Mains voltage: 400/230 V Amperage: 43.3 A Max. sound level: dB(7m) =78 Engine: KOFO Model: K4100D Intake system: naturally aspirated engine Fuel Injection System: Eddy Number of cylinders: 4 Displacement: 3,613 L Bore x stroke: 100x115 mm Compression Ratio: 20:1 Nominal speed: 1500 r/min Engine power: 33 kW Controller: Mechanical Starting voltage: 12 V Generator: Lucla Model: LU 184GS Phase: 3 Voltage: 400 V / 230V 43.3A Line type: 3 phase 12 cable, Y type Stock: 1 Power factor (cos f): 0.8 Frequency: 50 Hz Continuous power: 30 kVA / 24KW Arousal Type: Brushless, Self-Arousal Voltage Regulation: % ±0.5 Protection class: IP 23 Degree of insulation: H Altitude(above sea level): m =1000 Controller: ...

Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6" MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6" (600mm) SMALLEST NORMAL MODULE 0.137" LARGEST NORMAL MODULE 0.393" MAX TOOTH WIDTH 3.93" SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118" SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82" CUTTER HEAD RADIUS 3.46"-7.12" WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85" INSIDE TAPER NO. 39, 1:19,692 6" MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29" AXIAL OFFSET +/-2.36" SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED ( ...

Automatic foil sealer AUDION ELEKTRO Type D552 V10 Vertical Belt Sealing AUDION Packaging Machines Continuous Heat Sealing Machine, Bag Closure, Pouch Sealing Machine Continuous Heat Sealer Machine No. 9607552683416 Year of construction 1996 Weld seam width approx. 10 mm Endless welding length Mains connection 230 Volt, 50 Hz, 740 Watt - infinitely variable temperature setting from 80C to 320C - Infinitely variable belt speed from 1 to 12 meters/min. - mobile undercarriage Space requirement L x W x H 1400 x 600 x 1200 mm Weight 105 kg good condition; used

Waterjet Kimla 3116 machine is 100% efficient, mileage 6800mth 2009 in continuous use. Technical parameters: • Working range 3100 x 1600 mm • Dimensions of the cut sheet 3050 x 1550 mm • Maximum cutting thickness 200 mm • Pump with a pressure intensifier with ceramic plungers (very durable) • 37 kW pump power by ACCUSTREAM - USA • Maximum pump pressure 4137 bar • Galvanized bathtub • 300 kg abrasive feed hopper. • Pneumatic abrasive delivery system • Air cushion (can be cut in immersion) • Controlled by a pad • PcCamPlusv5 machine control software • KIMLA software controlling the head movement, compatible with the operating system • Low pressure piercing feature. The machine is in continuous use, we have 3 pieces in the company, sale due to less work. POSSIBILITY OF LEASING THE MACHINE

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Biosan chamber The chamber was purchased in 2017, efficient, not used. The UVC/T-M-AR is a chamber designed for clean work with DNA samples. The chamber provides protection against contamination. The UVC/T-M-AR model is a table-top model, made of a metal frame and a stainless steel work surface. The chamber is equipped with an open UV lamp installed in the upper part of the chamber. UV radiation from an open lamp disinfects the working surface by deactivating DNA / RNA fragments within 15-30 minutes of exposure. A digital timer controls the exposure time. The white light lamp provides proper illumination of the work surface. The chamber is equipped with a flow UV antibacterial lamp, which ensures continuous decontamination inside the chamber during operation. This lamp is recommended for working with DNA/RNA amplicons. The UV recirculator contains a lamp, a fan and dust filter ...

work piece width: 1500 mm plate thickness: 0,8 - 100 mm Brush width: 490 mm Brush diameter: 200 mm immersion travel: ca. 1.5 - 2.0 mm grinding speed: 200 - 1200 U/min band speed: 0,8 - 4.0 m/min work height max.: 950 mm Required air-pressure: 5.0 bar Air consumption: 80.0 l/min. number of brushing / polishing units: 8 Stück Control: NC Touch voltage: 400 V total power requirement: ca. 40.0 kW weight of the machine ca.: 6.100 kg. dimensions of the machine ca.: 3700 x 2750 x 2080 mm Well maintained condition with lots of accessories New price including accessories approx. 180.000 euros Special price on request Furnishing : - ERNST dry wide belt sanding machine TYP ATLAS ER ROTOR” Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen Control of the entire system graphically supported color terminal Adjustme ...

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm Control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

9222022 Gas Generator CAT 4.5 Mwe and 4.3 MWe with Auxiliaries Two separate 4.5 MW and 4.3 MW / 50 Hz natural gas engine driven generating sets with auxiliaries. Manufacturing years 2016 and 2014, total operating hours 3000 and 1000 hours only. Engines are CAT CG260-16 type high efficiency 1000 rpm units coupled Marelli’s 11 kV air cooled alternator. Both units with full CAT service records, still installed and can be tested. Both units have engine cooling made with two closed loop cooling radiators, one for HT and another for LT engine cooling circuits. Equipment is close to new like condition. Technical characteristics Manufacturer: CAT, USA Manufacturing year: 2014 and 2016 Engine type: CAT CG260-16 Engine speed 1000 rpm Operating hours since new 3000 and 1000 only Alternator CAT/Marelli MJH 800 MC6, Cos Fee 1 Power output 2014 4100 kWe continuous load Power ou ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Continuous Butter Making Machine - CBM, with an output of 750 kg butter per hour and an input of ± 1.500 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collection tray and can be drained off separately. If desired, the  ...

COEMTER BAG MAKER for BAGS-ON-ROLL TER CORE, type 92-90 38-25, constructed in 2001, n.2 nearly equal machines available, For LDPE LLDPE HDPE, Max bag width 900 mm., The machine is offered checked for good conditions, Constructors description:, AUTOMATION OF THE MANUFACTURING PROCESS, Bag making machines in continuous for bags in roll with core, with two tracks, making point-of-sale bags, freezer bags, refuse collection bags, etc., Robust and high-tech construction with continuous movement design to guarantee maximum reliability and minimum and easy maintenance., The sealing drum makes possible to work at low temperatures thanks to the long sealing time, and offers excellent adaptability to different types of materials, with maximum sealing guarantee., Mixed sealing optional., Use of independent band aligners before rewinding for perfect roll making., Placement of core container at floor  ...

TECHNICAL DATA Net weight: Kg 1330 Length: mm 2400 Width: mm 1550 Height: mm 1870 Voltage: Volt 230/400 Power: Kw 4 Frequency: Hz 50 PRODUCTION CHARACTERISTICS Production up to 48.000 vials/h Min. height vial: 20 mm Max. height vial: 140 mm Min. diameter vial: 7,5 mm Max. diameter vial: 36 mm Pressure: 2 bar The ESA series labelers apply self-adhesive labels from the reel to bottles and vials, cartridges and other unstable containers. All electrical, electronic and PLC components are integrated into the machines to save space. These continuous motion labellers have an extremely compact design. The label dispenser has a modular design and can be equipped with both intermittent motion and continuous motion printing systems. For added convenience and reliability, the functionality of the label dispenser can be enhanced by a number of additional controllers and wor ...

FANUCi-M numerical control Pallet size 305 × 305 mm Number of pallets 2 X-axis travel 410 mm Y-axis travel 510 mm Z-axis travel 410 mm Equipment footprint 460 mm diameter by 560 height Continuous table Robotic servo drive Spindle taper iso 40 DIN 69871 form A R pm 15,000 Number of tools 140 Year of construction 2004 Accessories: High-pressure tank Tool integrity check Continuous fourth axis Manuals and wiring diagrams plus CE certificate Hydraulic power pack for tooling Loading pallet with motorized rotation

Horizontal machining center FANUC 160 MC control Pallet size 630 X 630 Number of pallets 10 X-axis travel 1200 Y-axis travel 850 Z-axis travel 800 Maximum equipment diameter 1000 mm, maximum height 1080 mm B-axis continuous Tool attachment ISO 50 DIN 69871 B Number RPM 8000 Number of tools 230 Accessories: High pressure tank Tool integrity check Continuous 4 axis table Manuals and CE certificate MARPOSS header

CNC FANUC 16i MA Pallet Size 630 X 630 Bipallet X axis stroke 1000 mm Y-axis travel 880 mm Z-axis travel 800 mm Equipment footprint 1000 diameter × 1100 height Continuous B-axis table Manual machine servicing Spindle taper ISO 50 DIN 69871 form B Spindle speed 12,000 Number of tools 60 ACCESSORIES. High-pressure tank, tool integrity check, continuous fourth axis plus manuals plus CE certificate, MARPOS tester, spindle. Year 1999

complete with proteo pro VS 65 E CE bar feeder AND PRESETTING FIELD OF WORK Max turning diameter Ø mm 42 Max turning length mm 120 SPINDLE (ELECTROSPINDLE) ERG20 Pliers Holder Bar passage diameter mm 42 Spindle speed 7,000 rpm Power 30 min/continuous kW 7.5/5.5 COUNTER SPINDLE (ELECTROSPINDLE) ERG20 spindle connection Bar passage diameter mm 42 Spindle speed 7,000 rpm Power 30 min/continuous kW 7.5/5.5 RUNS AND ADVANCEMENTS X1 / X2 axis travel mm 65 Y-axis travel (upper turret) mm 250 Z1 / Z2 axis travel mm 150 X1 / X2 axis rapid feed mm/min. 40,000 Y-axis rapid feed mm/min. 40,000 Z1 / Z2 axis rapid feed mm/min. NOT VISIBLE WHEN VOLTAGED

Continuous Butter Making Machine - CBM, with an output of 1.500 kg butter per hour and an input of ± 3.000 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Product area of stainless steel. Frame of painted steel. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collecti ...

Continuous Butter Making Machine - CBM, with an output of 750 kg butter per hour and an input of ± 1.500 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collection tray and can be drained off separately. If desired, the  ...

This is a slicer from the manufacturer ADE type Juwel 2 with a 230V connection. The slicer has a 300mm slicer with Teflon coating and is suitable for cutting sausages and also for cutting cheese (no sticking of cheese to the knife). The models of the Juwel series are high-performance professional cutters that are suitable for the intended continuous operation. The cutting thickness is infinitely variable from 0 to 15 mm and particularly fine between 0 and 3 mm. The sophisticated drive technology with its air-cooled, maintenance-free motor and extremely quiet drive is also impressive. The machine is new and unused, but no longer in its original packaging (exhibition piece). OUR SERVICE FOR YOU: - 12 months warranty on all electrical parts - High-quality branded appliances at fair prices - Professional Overhaul / Inspection & Professional Cleaning - Tested & fully functional -  ...

Carton width 34 - 120 mm Carton height 15 - 85 mm Carton length 75 - 260 mm The CUK 1060 continuous motion cartoner from Bosch has been specially developed to solve the main problems associated with cartoning. The machine is designed for packing bottles into cartons. After the carton has been filled, the carton is closed by mechanical levers and the finished cartons are fed into the line. If the carton is recognised as incorrect, it is automatically sorted out and ejected. The Bosch Continuous Motion Cartoner Mod. CUK machine is equipped with feeding systems for bottles. The products are fed into the machine, which assigns a carton to each product. The carton is removed from the feeder by a rotor, erected and opened. The product is inserted into the box using the pusher station. The filled box is then closed. Checks are carried out on the products to be packaged to ensure maximum ...

ITGS-120A CONTINUOUS INDUCTION SEALER Continuous induction sealer to be mounted on a packaging line. This machine must work with a conveyor belt that moves the containers below the sealing head, where the caps are heated and induction sealing is performed. Electrical specifications: Supply 230VAC 50Hz Power 2.5 KW Technical specifications: Production ≤ 120-200 seals/min (depending on the product) Sealing diameter admitted: 20-120mm Can height admitted: 40-300mm Induction power: Adjustable User interaction: Pulsating Control core: Electronic Finish: Stainless steel

Folding machine MBO T530-R Cassette fold. machine T530 with a continuous feed mechanism is designed for post-press works, processing of printing products Maximum sheet dimensions: 53.0 x 84 cm Minimum sheet dimensions: 15 x 15 cm Speed: 10 - 200 m/min 4 cassettes + 4 cassettes + 1 knife(X), perforation Configuration: 4; 4X; 44; 44X T530-R Continuous Feed Mechanism 4 cassettes. folder: Т530-1-53/4 4 cassettes. folder: Т530-2-53/4 knife folder: T530-3-X receiving-output device: А56-DC-24 El / equipment: T530-1-53 / 6-R; W09/05 year of issue 2005

CNC turret lathe Okuma LB15 at call The OKUMA LB 15 CNC lathe has been professionally serviced regularly since its purchase and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret holder for 12 tools. The turning spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Technical specifications of the CNC lathe OKUMA LB-15 – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Slain chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Diameter of the spindle bore: fi 75 mm (at a depth of 70 mm, measured from the front of the lathe chuck and without jaws) – Diameter of the spindle bore: fi 28 mm (at a depth of 200 mm, measured from the front of the lathe chuck and without jaw ...

Used Capsuling Machine Robino and Galandrino up to 15000 bph In the bottling field efficiency and precision are paramount They ensure maximum productivity and uphold high quality standards Consequently the used Robino and Galandrino capsuling machine emerges as a technologically advanced solution Specifically designed to meet particular needs it boasts a capacity of up to 15000 bph This article meticulously explores the machine s technical characteristics and specifications Furthermore it highlights how it can significantly optimize bottling processes PVC Capsule Distributor of the Used Capsuling Machine Robino and Galandrino up to 15000 bph The PVC capsule distributor ingeniously designed for continuous feeding guarantees an even distribution of capsules on bottles This essential component steadfastly maintains a steady production flow Moreover it ensures each bottle is sealed correctly ...

Ibarmia ZVH 45/L 1600 moving column machining centre :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Tool Holder: ISO 40 - Spindle Power: 18.5Kw Spindle speed: 10000 - Number of tools: 60 - X axis stroke: 1600mm - Y axis stroke: 800mm - Z axis stroke: 940mm Rapid feeds for linear axes X Y Z: 30m/min Fourth axle head: yes Fourth Axis Head Type: Continuous Rotary Table: Yes Rotary Table Type: Continuous Table size: 800mm High refrigerant pressure: yes Chip conveyor: belt conveyor Machine equipment: Optical scales :::D DIMENSIONS AND WEIGHT::: Length: 6750mm Width: 4200mm Height: 3600mm

Forming: up to 60 pieces /Min Extruding: up to 400 grams /hour Min/Max weight: 10 /300 gr Output Rate: Up to 60 pieces /Min Capacity: Up to 400 kg/hour Encrusting Type: Spherical,Bar shape,Continuous Cylindrical,Continuous Swirl

Continuous tunnel pasteurizer, make Steiner, type TP 900/5000, year 2012, for continuous pasteurization of e.g. jam in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

Used Can filler Uni Blend 72 and Seamer Angelus 120L up to 40000 cph Introduction of the Can filler Uni Blend and Seamer Angelus 120L In the highly competitive bottling industry companies rely on advanced machinery to streamline production Among available equipment the Filler Uni Blend 72 and Seamer Angelus 120L stand out Filler Crown Uni Blend 72 The Filler Crown Uni Blend 72 is crucial for high volume bottling Equipped with 72 ADCOR valves it ensures precise filling boasting a remarkable capacity of 40000 cans per hour Therefore it helps companies maintain a competitive edge Seamer Angelus 120L Complementing the Filler Uni Blend 72 is the Seamer Angelus 120L Renowned for precision and reliability it features 12 sealing heads each meticulously calibrated This level of sealing precision is crucial for preserving freshness and carbonation Consequently it enhances customer satisfaction and ...

AUTOMATIC IMMUNOLOGY ANALYZER MAGLUMI 800 Fully automated medical device for hormone processing and special tests. Luminescence Principle: Flash chemiluminescence method, higher reagent stability. Operation mode: Random, batch and STAT functions. Sample loading: Up to 40 primary tubes. Continuous loading and emergency mode. Load 9 reagents on board per run. Continuous loading. Refrigerated reagent area. Integrated reagent kit, ready to use. Presentations for 50 and 100 determinations. Throughput: 180 tests per hour. Clot detection. Connection to LIS. Sophisticated software design.

Dmg DMU 125P Hidyn Machining Center ::SPECIFICATIONS::: CNC Model: Heidenhain Tool holder: SK 40 Spindle speed: 20000 Number of tools: 60 X-axis stroke: 1250mm Y-axis travel: 880mm Z-axis stroke: 800mm Rotary Table: Yes Rotary Table Type: Continuous Table size: 1250 x 1000mm Allowable load on the table: 1500Kg Fourth and fifth axis head: yes Fourth and fifth axis head type: continuous High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Weight: 18500Kg