container used for sale

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 480 x 180 mm feed: 100 - 1000 mm/min total power requirement: 2 x 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 150 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 300 mm feed: 100 - 1000 mm/min total power requirement: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kg. table turning speeds: 80 - 1600 mm/min. roll diameter: 200 x 50 mm workpiece diameter: 20 - 800 mm range L-W-H: 520 x 470 x 390 mm Antrieb range L-W-H: dito mm Mitläufer volt: 230 V / 50 Hz weight: 56 kg Description: - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 100 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 500 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 1,5 kW weight of the machine ca.: ca. 1,8 t Dimensions (LxWxH): 2,2 x 2,7 x 0,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 80 t workpiece diameter: 850 - 5500 mm drum diameter: 450 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 450 x 180 mm feed: 100 - 1000 mm/min total power requirement: 5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 kg workpiece diameter: 20-800 mm connected load frequency: 230 V speed: 100 - 1000 mm/min total power requirement: 0,1 kW weight of the machine ca.: 65 kg dimensions of the machine ca.: 520x470x390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 500 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3000 kg workpiece diameter: 20 - 1500 mm drum diameter: 100 x 200 mm connected load frequency: 230 V total power requirement: 0,12 kW dimensions: 0,8 x 0,37 x 0,36 m speed: 100 - 1000 mm/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Available with 350, 450, 500 and 820 tons cutting force. Continuous work Drive: Electric motor Motor New machine Field of application as follows: -Scrap -Windows and doors made of aluminium and plastic -Alu varieties -Types of wood (pallets, cabinets, industrial wood, more) -Mixed scrap -Bulky waste -more approx. 6 months delivery time after order Further information on request For a written offer, please write an email with your company details and address

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

Pressure: 9 bar Motor: 22 kW Voltage: 400 Volt / 50 Hz Free air delivery: 3,73 m³/min Measurement (WxHxD): 2500 x 2300 x 3000 Weight: 3000 kg

Pressure: 9 bar Motor: 22 kW Voltage: 400 Volt / 50 Hz Free air delivery: 3,61 m³/min Measurement (WxHxD): 2500 x 2300 x 3000 Weight: 3000 kg

Pressure: 9 bar Motor: 22 kW Voltage: 400 Volt / 50 Hz Free air delivery: 3,61 m³/min Measurement (WxHxD): 2500 x 2300 x 3000 Weight: 3000 kg

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

Equipped with: lighting Engine type: Deutz F4L2011F fuel: diesel Hour reading: 632 h Power: 42 Key: Yes

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

Max. relative humidity: 95%, max. operational pressure: 130bar, medium output: 23l/min, ambient temperature: 5-35°C, connected load: 6.5kW, weight: 80kg, with instruction manual, the system is unused.

There are two identical machines available, capacity: 70l, max. operational temperature: 100°C, operational pressure: -1 to 1bar, with agitator.

; Transport weight [kg]: 57200; Engine: TD100G; Lift height[mm]: 625; Maximum lift capacity [kg]: 42000; Power type: 4000002

Fully automatic storage system for containers – in excellent condition: Knapp Shuttle System OSR35 - installed 2016 Available from 2023, incl. 200 meters of conveyor technology, flow racks, Nerak lifts, picking stations Capacity: 7,000 containers 60x40x17cm, expandable up to 9,450 pieces. This OSR shuttle system from Knapp Fördertechnik could increase your performance enormously and reduce costs Performance: More than 500 picks/hour possible General information: The system has 2 aisles with a length of 23.5 meters (shelf length) for over 7,000 containers.An expansion up to 9,420 containers is possible. Additional information: Dimensions of the shuttle construction: Length: 32 m Dimensions of the shelf Length: 23.5 m Width: 7.5 m Height: 9.4 m Sizes of containers: Blue containers for picked goods: 60×40x35cm Green containers for storage: 60x40x ...

Spray booth water stabilizer Specifications: Agitator Pump Filler neck Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 thickness 3mm More items - new and used - can be found in our shop! International shipping costs on request!

Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. 1 head rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 20 cycles/minute | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine photo shows an open machine without protective covers and safety doors for a bet ...

1 pallet always has 16 plastic boxes and a Euro lid. Very good used condition. Stacking containers The price for a pallet is 110 euros. There are about 200 Euro pallets.

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: Weber Total width: approx. 1,360 mm Total depth: approx. 770 mm Total height: approx. 1,310 mm Content: 360 kg Volume: 770 liters Further data / information: Material color bin: black Material color lid: yellow Usable width: approx. 1,085 mm Useful depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. An additional desired transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery from us.

5892 - RINSING TUB, IMMERSION TUB Dimensions: 1720 x 1100 x 1600 mm Tank size: 1200 x 600 x 1400 mm Weight: 248 kg Material: Acid-resistant It is equipped with a connection suitable for filling and emptying (ball valve), a pneumatic (electric) valve is used to ventilate the tank.

weight max.: 2,2 t workpiece diameter: 101 - 1524 mm feed speeds infinitely variable: 0 - 3600 mm/min gear diameter: 254 mm gear width: 76 mm total power requirement: 0,5 kW weight of the machine ca.: 0,245 t dimensions of the machine ca.: 1,02 x 0,82 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

7 large bulk containers for bulk chips, PVC and others Good condition Price per piece 2.50 m wide 2.00 m high, 6 meters long

The scope of delivery includes: 01x DB-Gitterbox, used Design: incl. floor overall width: approx. 1,250 mm total depth: approx. 840 mm total height: approx. 970 mm Note: It is a used DB lattice box. There may be scratches, dirt and other signs of wear. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

- Manufacturer: Werit - Capacity: 2500 L - Test pressure: 0.3 bar - Price on request from warehouse We receive new items every week. Not all of them are immediately available online. However, if you are looking for something specific, you can simply send us an inquiry or feel free to call us. ---------------- - Manufacturer: Werit - Filling quantity: 2500 L - Test pressure: 0.3 bar - Price on request ex warehouse Every week we receive new articles. Not all of them are immediately available online. However, if you are looking for something specific, you can simply send us an inquiry or feel free to call us.

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).