container used for sale

A mobile ultrafiltration system is sold in a 20ft container with equipment: - Ultrafiltration modules type dizzer CL (Inge GmbH) - Backwash template 2.6 m3 - Pre-filter 300 ?m - Measurements for turbidity, conductivity and pH - PLC type T-Box for fully automatic control of the system - Operation of the system on site via touch panel as well as remote access via based visualization - automatic chemical dosing Additional additional modules can be purchased as an option: - 20ft expansion container with 12 additional UF modules - 20ft container with sewage and neutralization tank

100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in  ...

90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...

80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN  ...

60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight approx. 9,500 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

50 m³ / 50,000 l extinguishing water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 100,000 litres Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilize ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 50,000 litres Diameter: approx. 2,500 mm Length: approx. 10,700 mm Weight: approx. 9,200 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer  ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 40,000 litres Diameter: approx. 2,500 mm Length: approx. 8,720 mm Weight: approx. 7,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Type of machine: Semi-automatic dosing machine for loose products Portion: up to 2000g (2l) Accuracy: +/- 5g (available option +/- 1g) Power: 230V, 1 phase Emptying: foot-lever Material: food grade stainless steel Hopper volume: 120l (ca.50kg of roasted coffee) Dimensions(H x W x L): 1808mm x 751mm x 743mm LR 2.3 is designed for dosing such products as: coffee beans, nuts, seeds, grains, rice or noodles. The device is working in half-automatic mode. The operator pours the material to be portioned into the main container, then sets the desired weight and starts the dosing process. After weighing the required amount the operator puts a bag under the funnel and empties the weighing container by stepping on a foot-lever. The next charge starts automatically after the weighing container is emptied. In the meantime the operator ha ...

Fuel oil tank, diesel filling station, tank plant, service filling station, steel tank with 100,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, the dome lid sanddowns and fit ...

tank plant, fuel oil tank, service filling station, diesel filling station, steel tank with 50,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 to. - ex works, freely charged - We recommend: Above container from the outside sandblast, ...

Stainless steel IBC container, bulk container, capacity 750 liters Content: 750 Ltr. Operating pressure: pressureless Year built: unbek. Herst.: unbek. Material: Stainless steel 1.4301 Design: rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, Dome lid 400 mm with bayonic closure in stainless steel, drain disc valve DN 250 (250 mm) in Edelstah,l with hand lever, 1" threaded connection in the upper floor last use: food Height: approx. 1,450 mm Width/depth: approx. 1,180 mm / approx. 980 mm

Liquid fertilizer / AHL / ASL - Tank tank storage tank storage tank a used storage tank 100,000 litres for storage of liquid fertilizer / AHL / ASL with a brand-new plastic inner shell. The container corresponds to DIN 6616, has 2 saddle feet, is professionally emptied and cleaned inside, incl. ladder. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. Due to the corrosive properties of the bearing medium, ASL containers require an inner plastic shell. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore AHL for the storage of ...

The brand new container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is primed on the outside - on untreated sheets. D = 2.50 m - L = approx. 10.70 m. The container receives a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The price is ex works - freely charged. We recommend: Above containers sandblasting from the outside, prime and completely repaint - iron grey / RAL hue. (On request, other RAL colours are also possible!) ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL container  ...

Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 A used GRP tank in the size of 40,000 litres is offered. Volume: 40,000 Ltr. Material: GRP plastic very stable, approx. 1.3 cm wall Tank shape: cylindrical, vertical, flat-bottom tank Diameter 3.0 m, H approx. 6.50 m Exits: cathedral on the top, manhole on the side Ventilation DN 120 above Outlets at the top and two DN 80 outlets at the bottom Tank density approval 1.5 Year of manufacture 2016 Color: orange Suitable for above-ground storage of water, industrial water, rainwater, feed, whey, pig SLK, AHL fertilizer etc. Location Ascheberg. Transport can be organized inexpensively. Loading the container onto a truck or trailer is free of charge! Delivery time by arrangement approx. 1 week. Loading of the containers is free of charg ...

Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 A used GRP tank in the size of 30,000 litres is offered. Volume: 30,000 Ltr. Material: GRP plastic Tank shape: cylindrical, lying in galvanized iron shells Diameter 3.0 m, L approx. 5.0 m Exits: cathedral and exits at the top Ventilation DN 100 above Tank density approval 1.5 Tank cleaned and refurbished Suitable for above-ground storage of water, industrial water, rainwater, feed, whey, pig SLK, AHL fertilizer etc. Location Ascheberg. Transport can be organized inexpensively. Loading the container onto a truck or trailer is free of charge! Delivery time by arrangement approx. 1 week. Loading of the containers is free of charge. The sale of the containers is carried out in accordance with our general terms and conditions. A pr ...

Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 A used GRP tank in the size of 20,000 litres is offered. Volume: 20,000 Ltr. Material: GRP plastic Tank shape: cylindrical, vertical, flat-bottom tank Diameter 2.5 m, H approx. 4.70 m Exits: cathedral and exits on the top Tank density approval 1.5 Tank cleaned Suitable for above-ground storage of water, industrial water, rainwater, feed, whey, pig SLK, AHL fertilizer etc. Location Ascheberg. Transport can be organized inexpensively. Loading the container onto a truck or trailer is free of charge! Delivery time by arrangement approx. 1 week. Loading of the containers is free of charge. The sale of the containers is carried out in accordance with our general terms and conditions. A proper invoice with VAT is a matter of course.  ...

Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 A used GRP tank in the size of 30,000 litres is offered. Volume: 30,000 Ltr. Material: GRP plastic Tank shape: cylindrical, vertical, flat-bottom tank Diameter 3.0 m, H approx. 5.0 m Exits: Dom on the top Tank density approval 1.5 Suitable for above-ground storage of water, industrial water, rainwater, feed, whey, pig SLK, AHL fertilizer etc. Location Ascheberg. Transport can be organized inexpensively. Loading the container onto a truck or trailer is free of charge! Delivery time by arrangement approx. 1 week. Loading of the containers is free of charge. The sale of the containers is carried out in accordance with our general terms and conditions. A proper invoice with VAT is a matter of course. For further information, you  ...

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with  ...

Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Tank Underground tank Slurry tank Polyester tank GRP tank PE tank Ferric chloride tank Iron III water tank Steel tank Molasses tank By-product tank Oil tank Pressure tank Irrigation Irrigation Riding arena irrigation ebb and flow system Sports field irrigation Diesel tank Fuel oil tank Yard filling station Tank water facility Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank A used GRP tank in the size of 50,000 litres is offered. Volume: 50,000 Ltr. Material: GRP plastic Tank shape: cylindrical, lying in galvanized iron shells Diameter 3.0 m, L approx. 7.0 m Exits: cathedral and exits at the top Ventilation DN 100  ...

GreenLine SCH 230 - Mower container with flail mower GM 130. Universal device for mowing/mulching and for simultaneous reception of the mowing material. Heavy, robust design: mulcher with leaf mallet, mowing width approx. 130 cm, adjustable bottom roller, container approx. 3.5 m³, emptying, additional tailgate in the rear for transport of z.B. straw bales or tools. Tyres 10.0x75-15.3", 10 PLY. Ab. GG 2800 kg. Power requirement from 22kw/30 HP (manufacturer's specification), 1 hydraulic connection ew (tipper connection) required! Machine with age-related defects, but operational. Equipped with inerole brake, ABE (General operating permit for public road traffic), transmission with freewheel. 1 hydraulic connection ew required. Design-identical machine also available with 150 cm mower as well as one with 150 cm and 5 m³ container. Details and prices on request.

Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

Extraction and filter system Nestro 9/4/20 with chip container YOC ca. 2005 Filter area 156 m² Hoses 2 m long, 108 pieces, diameter 220 mm Total air volume approx. 20,000 m³/h Suction fans 1. Fan 16 kW 350 mm approx. 9,000 m3/h 2. Fan 11 kW 350 mm approx. 6,000 m3/h 3. Fan 7.5 kW 250 mm approx. 4,000 m3/h Return air duct with summer/winter flaps Cleaning electromechanically 3 motors each 0.66 kW Rotary valve 0.37 kW 3860 mm Transport fan to container 4 kW Control of the system with electrical plans External dimensions approx. L x W x H 4000 x 24200 x 5000 mm Weight 6,000 kg Container for chips L x W x H 4500 x 1900 x 2100 mm Weight approx. 2,000 kg The extraction system is still in operation and will be replaced by a larger system in January 2024 The facility is fully operational and will be available at the end of January 2024 The system can be disassembled i ...

Manufacturer: Blow Moulding s.r.l. Machine type: BM 2000 D (CoEx) Stations / Stations: Double / Double Year of construction / built: 1999 Location: Europe/ Europe Control type / control system: Original control (Microset) Number of extruders: 4 Extruder sizes: 60, 35, 60, 35 - (24D) Hose head / parison head: NEWMA 6-layer CoEx single-head (New) / NEWMA 6-layer CoEx single-head (New) Mould platen sizes (mm): 290 x 380 Flaschenvolumen Max. / bottle volume max.: 3,2 Lit. Clamping force: 55 kN Accessories: - Viewing strip extruder / Viewstripe extruder - 2x rotating wide neck edge/ 2x rotary trimming devices - 5 suction conveyors for material/ 5 suction conveyors for materials - 1 dryer on extruder no. 4 – EVOH 1 dryer on extruder no. 4 – EVOH - 1 dispenser on the extruder No. 1 – main batch 1 dispenser on extruder no. 1 – master batch - 1 dispenser on ex ...

Container 490 liters of V2A, used, temperature-controlled, insulated consists of material 1.4301(AISI304) V2A. The volume is about 490.00 liters. The diameter inside is 700 mm. Container 490 liters made of V2A, used, temperature-controlled, insulated has the following dimensions: length 1,200 mm, width 1,000 mm, container 490 liters made of V2A, used, temperature-controlled, insulated was last used in the following area: Food. Currently, 490 liters of containers made of V2A, used, temperature-controlled, insulated still 4 pieces are available. Delivery can take place worldwide.

Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request

Pharmaceutical, cosmetic, food and chemical stirrers / blenders Tripod agitator: VISCO JET® VJ200 - as good as new, unused because not ATEX The pilot plant agitator for research and production Can be used up to a container height of 500 mm, max. container diameter of 400 mm Manual lifting height adjustment, infinitely lockable, operation via touchscreen Safety switch for container clamping, emergency STOP switch. Including 5 different VISCO JET® agitators for low-, medium- and high-viscosity media Original price as offered (stainless steel roller table, touch screen, shafts and stirrers) was EUR 23.000,- net

Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm  ...

filling capacity: 800 kg max. workpiece height: 900 x 300 mm workpiece weight: total 500 kg container volume: 878 l max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1175 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workp ...

The system has an explosion protection EEx dIIA/IIB-T4 Machine name: Filter dryer / filter pressure groove Manufacturer: Rosemund Type: RLF02-648-91 Year of construction: 1991 Material: Container, heater and stirrer: 1.4435 operating pressure: Container: - 1 / 6 bar heating jacket: - 1 / 6 bar operating temperature: Container: - 50 / +150 °C. Heating jacket: - 50 / +150 °C. Dimensions: length 1650 x width 1170 x height 2400 mm Empty weight: Approx. 2000 kg Tech. Documentation: Yes Remark: Drive hydraulics: 5.5 kW Electric motor: power 5.5, speed 1500 rpm, type V1, protection class IP55 Explosion protection: EEx dIIA/IIB-T4 Accessories: A base frame and a hydraulic system Condition: Used good Price: On request

Sample filling system for low viscosity products (ketchup, jam, sauces, etc.) into bottles, glasses, cans. Including container unscrambler, rolling bottle/container rinser, viscosity filler (hot filling, steam filling), vacuumize jar capper. - Specifications: filling volume 20-1000ml | bottle size range: diameter 20-150mm, cap diameter: 20-70mm | 4-12 filling nozzles allowing speed s of up to 6000 bottles/containers per hour | tolerance of filling quantity: +/- 1% | yield of capping: < 99% | 380V, 3.5kW, 0.6m?, 6bar. - Please note: These are specifications for a sample system only. The final specifications will vary. Please give us your packaging details (container size, shape, filling product, required speed , etc.) to prepare a full quotation for you. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Us ...

Automatic rotary cup or container filling system for liquids including dosing unit and sealing module for the lidding film. Suitable for products with flow characteristics, various container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Automatic operation from drop cup, filling to sealing. 2 cups / containers will be handled per cycle. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: filling capacity: customized | max. speed of the machine in neutral: 80 cycles/minute | power: 220V / 380V, 2kW | machine dimensions: L1100xW1100xH1600m | weight: approx. 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below t ...

Automatic multi-lane filling and capping machine for cups, containers or trays incl. film sealing unit. Suitable for various container sizes, shapes and materials (e.g. PP, PS, PET, paper, laminated films, etc.). Equipped with a 4-head linear weigher and 4 piston pumps for liquid dosing, this sample line is especially suitable for fresh olives and liquids. In general, the line can be configured for all types of (separate) dosing systems for liquids, pastes, granules, powders (price adjustment may be necessary). This allows perfect filling and packaging of instant meals, pasta, pasta, fresh or dried fruits, snacks, soup powders, frozen meals, yogurt, ice cream, jam, etc. Automatic operation from feeding the containers/cups/trays, filling, sealing with film and capping with a lid. Easy operation due to touch screen monitor, stainless steel version (SUS304), easy to clean. Print mark sensor ...

Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2 | max. speed of the machine in neutral: 60 cycles/minute | power: 220V, 2.6kW | compressed air: 0,2m?, 6bar | machine dimensions: L3000xW950xH1600mm. That machine/system is available in different versions for  ...

Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2 | max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 2.1kW | compressed air: 0,2m?, 6bar | machine dimensions: L3000xW850xH1600mm. That machine/system is available in different versions for  ...

Automatic rotary cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of working stations: 12 | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 2.1kW | compressed air: 0,1m?, 6bar | machine dimensions: L900xW850xH1600mm. That machine/system is available in different versi ...

Automatic rotary cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of working stations: 8 | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1.5kw | compressed air: 0,1m?, 6bar | machine dimensions: L950xW870xH1600mm. That machine/system is available in different versio ...

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

P311 - used approx. 110 m³ / 110,000 L GF-UP tank, standing on stand frame or horizontal, with chemical protective layer. Technical details: Capacity: approx. 110 m³ / 110,000 litres Material: glass fibre reinforced plastic, GF-UP Manafacture: Reich-Tank Year of construction: 2005 DIBT bauaufsichtl. Approval: Z-40-11-117 Specific gravity: min. 1.06 kg/L Dimensions: Ø approx. 3.00 m × H total approx. 19.05 m Other: Used tank made of glass fibre reinforced plastic / GF-UP, with inner chemical protective layer, professionally cleaned and in good condition. Standing, above-ground storage container on stand frame, incl. ladder and roof platform, dome on the side of the tank and on top of the roof, several inlets and outlets. Former silo for the storage of biogas and 9% sulphuric acid, including container statics and expert opinion to prove suitability according to §19 g/h WH ...

MTU 8V4000 Year of manufacture 2001 Current operating hours 1077, last load run January 2023, The system is installed in a container, including silencer, table cooler and piping. A 1000l fresh oil tank is installed in the container, a connection of an external tank is possible (preparations for connection have already been made) Special feature. The control system has been renewed by HGS (ComAp). Power: 1000 KVA / 800kW at Cosphi 0.8 Dimensions container; 9,60 x 3,00 x 3,21m Weight approx. 18t Dimensions superstructures; Table cooler 5.00 x 2.45 x 1.65m Weight approx. 3t / Shock absorber 4.00 x 1.80 x 0.70 Weight 0.5t