console used for sale

- Office/canteen furniture: 1 wooden table, 4 office chairs, 1 sofa, 1 microwave - Office/canteen computer equipment: 4 pc monitors, 2 Fujitsu PC, 1 x Acer mini PC, 1 x HP printer - Office furniture: 3 desks, 8 office chairs, 8 wardrobes office cabinets, 1 console, 1 high office cabinet, 2 Desk drawer units, 1 shredder, 1 Low Entrance Cabinet - Office computer equipment: 1 Harkdon PC, 1 Epson M2300 laser printer, 1 monitor for Samsung PC, 1 x Acer PC Monitor - Iphone Cell Phone: 1 Iphone 7 with broken screen.

Inv. Num. : 7371 Type: WMC2-4030 Producer: Flow Created: 2007 Parameters: Operating hours: 21000 h Work table length: 4000 mm Work table width: 3000 mm Cutting head: Paser ECL Equipment: Abrasive dispensing system Water supply Metallurgical material (10 tons) New Console Shelf Spares Replacement high-pressure pump (37 kW) 2017: new pump

Inv. Num. : 6528 Type: WH 80 Producer: TOS Created: 1966 Parameters: Spindle diameter: 80 mm Cone: Morse 5 Equipment: DRO Vice Dörne Console (1000 x 500) The machine is in good technical condition.

Gebr. Edge sanding machine Wild + Gap NFSB1 Motor power: 2.6 / 3.2 kW (2 speeds) Table size: 30 x 100 cm Table adjustment height + depth by handwheel Swivel grinding unit Veneer grinding device Support table for radius grinding (diameter roller: 100 mm) Sanding belt height: up to 200 mm Suction connection: 140 mm Feed console incl. various sandpaper Dimensions: L: 180 cm W: 95 cm H: 120 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

The machine is in good technical condition. Spindle bore: 80 mm Taper: Morse 5 Equipment: Own crane Digital measurement 1000 x 500 console It was used once a year for light drilling or milling. By prior arrangement, the possibility of a tour in progress.

Overview  The KV 600 HP on-line shrink packer was built in 2016 by the German manufacturer beck packautomaten. The machine is fully functional, in very good condition and was only in single-shift operation from July 2016 to October 2017. After that it was stored as a backup.  Technical details Output: 20 packs/minute Operating hours: 1,265 h The following items were packed: Beer cans in trays (L x W x H) 405 x 205 x 120 - 170 mm 405 x 280 x 120 - 170 mm, transported crosswise  Film quality Polyethylene shrink film (flat film), Monoaxially shrinking, thickness 30 - 50 μm Max. roll diameter: 250 mm Inner core diameter: 76 mm Welding width max. 600 mm Passage height 280 mm (The pack height depends on the type and format of the product, film quality and film thickness) Packaged goods height max. 170 mm Packaged goods length max. 450 mm Working height 880 mm +/- 50 mm Running direction of ...

Specifications: - Load capacity 500 kg - Projection approx. 4000 mm - Hackenweg approx. 3000 mm - Swivel radius approx. 180 ° - Crane boom IPE 240 - Total height with brackets approx. 1250 mm - Console width approx. 200 mm - Total length approx. ca. 4500 mm - Hoist: Make: STEEL Type: R 6 - Lifting speed approx. ca. 1.5 / 6.0 m/min -one. Trolley chassis -one. Swivel the boom - Operation via pendant switch - Drive 400 V - Total weight approx. 400 kg

Home organ WERSI Spectra DX700CD, mother-of-pearl white high-gloss lacquer white, 2 memory cards, purchased for 40,000 DM, restored for approx. 7,000 DM, multi-track cassette recorder TASCAM 244, mixing console BELL MDA400, drum machine BÖHM Digital-Drums

This TRUMPF TrumaBend V85X Bending machine was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard equipment covers a sturdy machine frame, pressure beam with high bending strength and CNC backgauge with rack and pinion drive for X- and R-axis. As special features the machine has an increased installation height and stroke by 150 mm each to 535 mm, a 5-axes backgauge system, a hydraulic and hardened upper tool clamping, a hydraulic lower tool clamping, CNC crowning, a BendGuard safety device, a support front console and control cabinet climatization (for 2-, 4-axis backgauge systems). It comes with a bending tool package. License for software, ToPs 600 for bending, included. See attached original tech specs positions as PDF (German).

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 143670 € : 2859.03 € : 2000x4000 mm : Hypertherm XPR 170 CORE : 60 mm : 38 mm : 38 mm : 35 mm : 22 mm : 25 mm : 170 A : 12 m/min : 35 m/min : +/- 0,1 mm : 0,1 mm : 6000 kg HyPerformance plasma power sourceHyperthermXPR 170 COREWITH ",TRUE HOLE", TECHNOLOGY Automatic gas console Plasma torch height control Collision protection (torch brake away system) CNC control with Aurora Software Lantek CAD/CAM software with auto nesting Control of filter unit by CNC Remote control diagnostic by Ethernet Cutting plate alignment function User manual in GERMAN or ENGLISH Options: Suction with filter € 22.710,- Morepricefor Optimix instead of Core € 10.330,- Further options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 piece dosing filler type K 12”, - without control cabinet, for filling thin or viscous products into glasses., Glass size: 28 g glass Ø 44.5 x 51.4 mm height TO 43, Product: fruit spreads, jams, ketchup, mustard etc., Product pieces: up to 10 x 10 x 10 mm, Filling temperature: up to approx. 85°C, Dosage range: 25 to 250 ml, Performance: depends on product and glass size, up to approx. 120 fillings / min., Product tank: 120 liter capacity instead of 45 liters, The dosing filler is specially designed for filling thin and thick liquid as well as pasty products, suitable. It can be a partial dosage or a full filling in cans, jars and, bottles., Depending on the product, the filler can be used for cold or hot filling., The system is constructed in a completely rust-free design. The dosing filler does not have its own, Belt body and can therefore be attached to an existing conveyor belt. ...

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...

Description: • , Console , table 'K'  ,  ,- 8 clamping consoles ,  ,  ,- 8 pneumatically lowerable longitudinal stops (rear stop row)  ,  ,- 8 pneumatically lowerable longitudinal stops (centre row of stops)  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the right working field  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the left working field  ,  ,- ,electronic surveillance of all stop cylinders  ,  ,- 6 Workpiece feeding rails , to ease placing of heavy workpieces attached to the side of the ,  ,  ,  ,  , consoles 1, 3 ,4,5,6 and 8 , - ,LED displays for fast, simple positioning of vacuum clamps and consoles. Chip conveyor belt integrated in the machine frame work table: X = 4500 mm , Y = 1500 mm , Z = 125 mm.  ...

Offer fields KF700SP from part-time carpentry in the best condition for sale. The sliding table saw is equipped with a swivelling (0-45°) electrically height-adjustable milling spindle as well as numerous special accessories. Used, Year of Construction 2008 Operating time according to hour meter 430 h (corresponds to 0.07 h/day) Motor power 4 kW direct start with brake and limit switch Circular saw scoring unit with its own motor drive Format sliding table, cutting length 2500 mm Optional extras: Lateral table extension Additional electrical switching point circular saw/scoring unit on the sliding table Electric height adjustment circular saw unit and milling spindle with Powerdrive Circular saw scoring unit with motor 1 hp Degree display of the circular saw/milling spindle swivel in the handwheel Rip fence with digital display Quick-change system for milling spindle  ...

Description: Composed of: - Machine body dimensions 2015x1700x2843 mm - Desk with pc, monitor, HP printer , - External unit ZEISS ACCURA MASS/B, 1600 VA - ZEISS control console - ZEISS calibration sphere - Exchange magazine with Contact Probing System heads and 1 Optical Probing System head - Complete with user and installation manuals , - Complete with instruction manual for CALYPSO software - Various boxes and packaging for component storage  , NOT INCLUDED, EXCLUDED FROM SALE, VISUAL MICROSCOPE z-motion: 700 mm, x-motion: 900 mm, y-motion: 1,200 mm, control: PC, software: CALYPSO, table surface area l x w : 1500x1150 mm, daylight: 1,100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 2,015 x 2,843 mm

Description: Work table: X = 3250 mm (length) Y = 1220 mm (width) Z = 125 mm (thickness) CONSOLE TABLE WITH LED POSITIONING SYSTEM (DIODE LIGHT BAND) PROCESSING CONFIGURATION V12, H4X/2Y, N1, F1-HSK-15 KW, C-AXIS, W8 REAR, W8 FRONT Aggregates: HSK63 LOCK CASE, D=16 MM, 2 SPINDLES, HSK63 DRILL/MILLING INCLINABLE, CRANKED VERSION 10 pieces suction cups as per illustration 108651362_Suction cups (1) CE SAFETY AND PROTECTION DEVICE (not provided) - Protective grille in the side and rear area Protective grille only partially present, door present. MACHINE IN NEED OF REPAIR! DESCRIPTION: Machine throws up errors when starting up according to photos in the attachment. Missing error texts, diagnosis only starts when called up several times. Tool is changed, but cannot be stored in changer because changer because changer (system changer) is not referenced. Switch cabinet wired with variou ...

Description: Powerful CNC machining centre equipped with: 2 pcs. main spindles, each with C-axis one of them with Flex-5 interface, 2 x 11 kW - HSK 63 drilling unit with 25 drilling spindles and groove saw 0/90° 2 pcs. 10-fold tool changers 2 console-tables for pedular processing and 4-fold processing max length of workpiece 3740 mm, while pedular processing 1830 mm, while 4-fold processing 700 mm max width of workpiece 1600 mm for processing with milling tool diameter of 25 mm, 1300 mm for all aggregates stop pin for workpieces with overhang of top layer LED positioning system vacuum loader Homag TBP 370 Traverse length approx. 13 metres Installation height from floor 1300 mm with 8 vacuum cups (130 mm and 100 mm diameter) new vacuum pumps in 2023 for further technical details please have a look at the pdf file (German language) working width y-axis: 1,600 mm, working l ...

Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...

Planer Brand: Panhans Type: 335/20 New machine Technical data: - Planing width 510mm - Feed table length 1620mm - Delivery table length 1170mm - Total table length 2850mm - Blade shaft speed 5000 rpm. - Extraction nozzle Ø 160mm - Chip removal up to 8mm - Weight approx. 1,050 kg Motor power 5.5kW / 7.5PS Voltage 400V / 50 Hz Required space approx. 2900 x 1500mm Solid German mechanical engineering For dressing and joining, including hollow and pointed joint setting for planing widths up to 510 mm and max. Chip removal up to 8 mm Ergonomic working position directly on the blade shaft PANHANS solid steel blade shaft ø 125 mm with 4 pieces of Tersa reversible blade Finely planed machine tables, total table length 2850 mm Control panel above at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow or pointed joint),  ...

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt r ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

technical details: - Position: GR 360 (pos. 5) - Diameter suction nozzle: 250 mm - Diameter pressure nodle: 250 mm - Steel impeller: curved - Air volume flow (V nominal): 5,400 m³/h - New engine Engine data: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 13.7 A - Frequency: 50 Hz - Speed: 2,920 rpm Dimensions (H x W x D): 1,130 x 850 x 690 mm Transport dimensions (H x W x D): 1,300 x 800 x 1,200 mm (on EURO pallet) Weight: 250 kg Consoles and vibration dampers can be requested and supplied on request. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

unused consoles o.a.., presumably to make "HOLDER". material thickness 10 mm € 200,-net + 19% VAT

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

lying GRP tank (polyester), with 3 consoles Volume: 10 m3 Dimensions: 2.0 m x 3.30 m long

lying aluminium tank with inner coating with consoles Volume: 20 m3 Dimensions: 2.0 x 6.70 m long

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

Masterwood Italy CNC Ventilation Center for Door and Window Production Type Woodmaster ATLAS Built in 2000 SN 00120018 for the processing of solid wood and panel material, etc. Working strokes of the axles: X Axis 3900mm Y Axis 1785mm Z- Axis 630mm Workspace X Axis 3500mm Y Axis 1210mm Z- Axis 210mm Max speed of axles 60-50-20m/min 6 edition consoles Workpiece clamping device Electric main spindle with ISO 30 intake 6.8 kW 24,000rpm Saw unit integrated in the work unit Automatic change of tools 18 positions Numerical control SINCRO with industrial PC and keyboard Safety tread mats Vaccum Pump Total required power 27 Kw Care pressure 6-7 atm Compressed air consumption per arebit cycle 200-300Nl/min Suction speed 25-30m/sec Air consumption 5000m3/h 400 V/ 50 Hz Weight 4500 Kg Technical information subject to reservation

Biesse Italy, Rover 22 CNC Machining Center Built in 2001 SN 07498 Workspace 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vaccum suction holder 4 pneumatic bakelite rods for lifting the plate Vertical electric spindle 7.5 kW with automatic tool change, ISO 30 cone Automatic tool change 7 positions on the working head Drill head with 20 spindles arranged as follows: 7 vertical in X-axis 7 permeable to Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Groove saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical information subject to reservation

sheet width: / mm plate thickness: / mm distance between columns: / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80, ELCO 85 P Lower knife height adjustment The data for this ad was created with ModulMWS - the software soluti ...

2 pcs joint suction arm Specifications: - Boom length each approx. 6 m - 5 joints each - Suction pipe diameter 125 mm - Wall connection – consoles - Weight each approx. 100 kg

Mobile dust extractor Brand: SCHUKO Type: Vacomat 300 XP New machine Technical data: Connection Ø: 300mm Filter cleaning: pneumatic Volumen flow: 5950 m³/h Motor power: 7,5 kW Filter surface area: 32,0 m², Test sign H3 / BGHM HO 143032 Dust level M, AWN 16 Noise absorbation: 74 dB(A) Incl. switch box Schuko V22/23 incl. forklift consoles

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...

upper floor, steel tank with welded consoles and four domes, ideal as rainwater tank can be ordered with inlet and overflow on request with partition wall in the tank (13.5 m³ + 25 m³, total volume: 38.5 m³) Total volume: 38.5 m³ Dimensions: Ø 2.95 m × 6.40 m long Consoles are 30 cm high, so the total height is 3.25 m

SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - Working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - Tool changer 9 slots - ISO 30 - Drilling head 16 spindles - Saw blade group - Axe C - Vacuum pump Becker 100 mc/h - N. 6 working consoles - 7.5 bars - CE (year 2001)

Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Mill: with inserts -3x consoles: each with 2 motors available -Price: per piece -Weight: 60 kg/piece

General SKU404U1226 LocationBarneveld MakeBaumgartner & Co No.564 Year of construction2004 Pressure Working pressure4 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume103 Ltr. Pressure4 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Capacity103 Ltr. Vessel sizesdia. 450x715 mm Dished bottomcheck Top connectionsDN50 (CIP), DN40 Outletdia. 33 mm Max. temperature-15/150 °C With propellor stirrercheck (magnetic) Motor0.25 kW, 230/400 volt, 2720 rpm Speed mixing shaft± 200 rpm Information Mounted on consolescheck Floorspace0,74x0,74 m CEcheck Total height1,2 m Weight200 kgPressure vesselsBaumgartnerTanks > Pressure vesselsBrand > Baumgartner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU404U1225 LocationBarneveld MakeBaumgartner & Co No.566 Year of construction2004 Pressure Working pressure2.5 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume103 Ltr. Pressure2.5 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Capacity103 Ltr. Vessel sizesdia. 450x715 mm Dished bottomcheck Top connectionsDN50 (CIP), DN40 Outletdia. 33 mm Max. temperature-15/150 °C With propellor stirrercheck (magnetic) Motor0.25 kW, 230/400 volt, 2720 rpm Speed mixing shaft± 200 rpm Information Mounted on consolescheck Floorspace0,74x0,74 m CEcheck Total height1,2 m Weight200 kgPressure vesselsBaumgartnerTanks > Pressure vesselsBrand > Baumgartner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipp ...

General SKU251U308 LocationBarneveld MakePfaudler TypeCH2500 No.64311 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2867 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity2867 Ltr. Vessel sizesDia: 1200x2800mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Mounted on consolescheck Total height3,15 m Weight1385 kg Floorspace1,6x1,6 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to in ...

General SKU251U327 LocationBarneveld MakePfaudler TypeCH4000 No.64315 Year of construction1998 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4362 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity4362 Ltr Vessel sizes1400x3200 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN100, DN80, DN50 OutletDN100 Max. temperature-20ºC/+200ºC With jacketcheck 419 Ltr Half coil jacketedcheck Max. temperature-20°C/+200°C Information Mounted on consolescheck Total height3,56 m Weight3482 kg Floorspace1,8x1,8 mPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in wor ...

General SKU251U326 LocationBarneveld MakePfaudler TypeCH4000 No.64306 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4440 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity4440 Ltr Vessel sizes1400x3200 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionscheckDN100, DN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Mounted on consolescheck Total height3,6 mtr Weight1790 kg Floorspace1,7x1,7 mtrPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU276P416 LocationBarneveld MakeGericke (CH) Type50 No.2003 Year of construction1992 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D600xd180xh700mm) with butterfly valve with actuator Outletdia.50mm, (butterfly halve with actuator) Max. temperature80 degr.C Information Mounted on consolesmobile Floorspace1,2x0,8 M Total height2,0 M Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU276P415 LocationBarneveld MakeGericke (CH) Type50 No.50.2154 Year of construction2002 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4541 (321) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D500xd180xh700mm), with butterfly valve and actuator Outletdia.50mm, with butterfly valve and actuator Information Mounted on consolesmobile Floorspace1,1x0,8 M Total height1,8 M Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU276P412 LocationBarneveld MakeGericke (CH) TypePTA 20 No.20.3032 Year of construction2004 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume20 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity20 Ltr Dished topcheck Dished bottomcheck Top connectionsCone valve DN200 with actuator Outletdia.50mm (butterfly valve with actuator) Information Mounted on consolesmobile With switchgearcheck Floorspace1,2x1,0 M Total height1,3 M Weight170 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...

General SKU276P418 LocationBarneveld MakeGericke (CH) Type50 No.50.3012 Year of construction2004 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D500xd180xh450mm) Outletdia.50mm, with butterfly valve and actuator Max. temperature80 degr.C. Information Mounted on consolesmobile With switchgearcheck Floorspace1,9x1,0 M Total height1,5 M Weight250 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU276P411 LocationBarneveld MakeGericke (CH) TypePTA 50 Mach.No.50.3017 Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionsCone valve DN200 with actuator Outletdia.50mm (butterfly valve with actuator) Max. temperature80 degr.C. Capacity50 Ltr Information Year of construction2004 Mounted on consolesmobile With switchgearcheck Floorspace1,4x1,1 M Total height1,4 M Weight170 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKUR0955 LocationBarneveld MakeEHW Thale Email GmbH (D) Type6300 ltr No.6 2 3519 Year of construction2006 Pressure Working pressure6 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialGlass Volume6300 Ltr. Pressure6 Bar Specified Features - Pressure vessel MaterialGlass - Enamel Capacity7235 ltr (nett 6300 ltr Vessel sizesdia. 1800x3200mm Dished frontscheck ManholeDN600 Top connectionsDN50 (3x), DN80 (2x) OutletDN125 Max. temperature-25/200 degr. C Information Mounted on consolescheck Total height2,3 M Weight4500 Kg CEcheck Floorspace3,7x1,8 MPressure vesselsThaleTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nethe ...

horizontal aluminium tank with 2 consoles Volume: 15 m³ Dimensions: Ø 1.90 x 5.80 m long