console used for sale

The motorized bending machine is in used condition and is fully functional. Ideal for the production of round or square air ducts. -Incl. Console to edit material in roll form - incl. double foot switch for clockwise and clockwise rotation - Usable width 1000 mm - Roller diameter 56 mm Condition see pictures. Visit and demonstration possible. The indicated price is a net price for collection ex works. A chargeable transport within Germany can be organized on request.

Bosch Turbo Scara SR6 Swivel Arm Robot Manafacture: Bosch Order No. 3842999835 Serial No. 3610 773 Tripod length: Console HubQuill 40025 PN. pressure max. 8 bar Load max 8 kg Weight 48.5 kg Swivel range see picture Mounted on aluminium profile base frame. Condition: Used The robots were all in the warehouse of a large automotive supplier as a breakdown replacement machine, so they are they are in very good condition. In addition to about 50 paternosters, there are countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. Available. Workshop equipment, workbenches, workshop trolleys, tools, stackers and shelves plentiful A total of 24,000 m² of production space will be dismantled and sold Please also take a look at our other offers.' After purchase, the amount is due within 7 working days. More items - new and used ...

3-roll hydraulic 3000x30 mm pre-pinch planetary MG model G3030 year 2021 -Plate width 3000 mm -Capacity thickness 30 mm -Pre-pinch 25 mm -width on the rolls 3100 mm -upper roll size 400 mm -lower rolls size 380 mm -Hardened rolls surface. -All driven 3rolls gear box motorized each synchronized rotation -Conical plate bending attachment , rolls tilting & contrast roller. -Operator console with directional joysticks and digital readouts -Front drop-end open hydraulic -Emergency and safety installation -User manuals and instruction books. -Electric power 25 HP on the hydraulic unit. -V400/50

Four roll plate bending machine 2000 x 5 mm • mechanical dual prepinch • Model MCA2016 DAVI • Plate width 2000 mm • Capacity thickness 5 mm • Pre-bend 4 mm • Mechanical side rolls driven on linear guideways • Top roll 160 mm - lower roll 150 mm • Hydraulic rotation 4 hp • Conical plate bending with side rollers tiltable • Drop end front open hydraulic • Console electric control

Digital Microscope Controller for VHX-7000 Series Console for VHX -7000 Camera Unit High Performance Camera VHX 7020 Tripod (motorized in XYZ 100mm) VH zoom lens 20x-200x Tripod adapter for VH-Z20 Polarization adapter for VH-Z20 3D measurement software for VHX-7000 Bracket for VHX-S770E/750E Dispatch by Spedition_separate invoice prepayment when ready for dispatch !

Screening machine Nordberg Bergeaud 20/50-3 Brand: Nordberg Bergeaud Type: CVB 20/50 Screen area: length 5000 mm, width 2000 mm - 3 deckers Propulsion: 22 kW electric motor Incl.: springs and spring console.

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 / re. 200 mm capacity 45 degrees: square: li. 250 / re. 180 mm capacity 45 degrees: flat: li. 270x200 re. 200x160 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: li. 170 x 170 mm motor: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from  ...

Weibert WJ-KS30S Oscillating edge grinding machine WEIBERT WJ-KS30S with polished veneer 400V 3 KW (4 HP) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Sanding belt back panel 1050x200 mm Belt speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 HP) Can be switched on/off Machine table and guides made of GREY CAST IRON Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzle 120 mm Roll pull-out table widening Belt width 200 mm WJ-R00300 Optional at extra charge: Roll extension table widening WJ-R00101 Mitre stop WJ-R00102 Feeder console WJ-R00204 Driving device WJ-R00103

Specifications: Manafacture: Stow Type: Pal Rack NS The scope of delivery includes: 01 x Console, used Usage: for push-through fuses in a double row of shelves SKU: SPSD 40 Total length: 300 mm Overall height: 75 mm Opening rectangular tube: W 52 x 42 mm Material color: sendz. galvanized Weight: 0.51 kg | Pcs.

Screening machine KRUPP 21/55-2 Brand: Krupp Screen area: 5500 x 2100 mm - 2 deckers Upper deck: [] 35mm Lower deck: [] 16 x 3mm Propulsion: 22 kW Incl.: springs and spring console In stock: 2 pieces

Control panel, machine control, with stand MOELLER 3x K10+ 1x K01 3x control switch ( normally open ) K10 and 1x emergency stop ( NC ) K01 Switching capacity: 600 V AC 10 A / 250 V DC 1 A Console height: 930 mm Base plate: 150 x 150 mm used, tested ! Dimensions ( standing ): 220 x 150 x 990 mm

4 roll plate bending machine 3100 x 28 mm brand new year 2023 ready. MG model M3028 Capacity plate 3000 mm bending thickness 28 mm prebend 22 mm dual pre-pinch technical data: -length of rolls 3100 mm -top roll dia. 380mm -lower roll dia. 360mm - Power electric 20Hp weight 17ton Configuration fully hydraulic -Hardened surface of the 4 rolls , smooth finishing suitable for stainless steel plates rolling -Digital position readout with memory set -Conical bending plates , contrast pad hardened , rollers angle tiltable -Driven rolls hydraulic plate dragging with axial gear unit each powered rolls. -Opening front hydraulic to unload closed shells. -Rerolling system for welded plates calibration precise rounding. -Control console electric commands with digital readout -Safety installation and emergency stop according to regulation

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2014. Distinguished by its robust and stable construction, the machine ensures a high degree of safety, long-term trouble-free operation and excellent precision, even during the most intensive and demanding machining of e.g. steel or aluminium. The machine’s entire workspace with a length of 3000 mm and a width of 1500 mm is equipped with an extraction table, which effectively eliminates contaminants generated during machining and ensures comfortable working conditions. The JANTAR 2 plasma cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller, an ECKERT filter fan and double-sided AC servo motors. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - double-sided AC servo motors - plasma source:  ...

Thermal Platesetter Laserhead 830 nm, Resolution 2400 dpi Laserhead / Thermal Head TH7 for SQUAREspot® Imaging Plateformat, Kodak's very large VLF version up to max. 1265 x 1650 mm or smaller Media thickness: 0.15 – 0.5 mm Multi-Cassette Unit (MCU4) fully automated, load capacity up to 300 plates in four cassettes Productionflow direction: "leftwards plate output" Inline punch system included SSU Slipsheet Removal Unit Inline Chiller Universal Debris Removal Unit Drum Vacuum Box Plate supply tray for manual plate loading included Dell PowerEdge T6100, control unit (PC), Creo Print Console with 1-Bit-Tiff-Downloader (3rd Party licence onboard) Dimensions for platesetter and MCU: 7,116 mm x 2,850 mm

1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2004. Column length 2.300 mm. Designed for a maximum lifting load of 80 KG. Maximum radius 3.000 mm. Vertical stroke 1.800 mm. Standard operating console currently fitted with 500 kg rotating safety-hook. Other types of hooks for various products can be fitted at additional cost. NOTE: visible mobile foot-plate in pictures is strictly for our demo purposes and not included.

MANUFACTURER: RYOBI MODEL: 756 YEAR: 2006 SIZE: 53X75CN COUNTER: APPROX. 66 MILLION EQUIPPED WITH: SEMI AUTO PLATE CHANGE RYOBIMATIC DAMPENING AAC (AQUA AUTOMATIC CONTROL SYSTEM) RYOBI PCS-G REMOTE CONSOLE RYOBI PDS-E PQC TECHNOTRAND ALPHA D 20 GRAFIX POWDERING ALL AUTO WASH UP DEVICE

Key data: 5000 mm, 1200 mm, 125 mm

Console table with LED suction cup position indicator, 8 manually movable consoles, each with 2 vacuum cups, 4 support rails Workpiece clamping via vacuum pumps 2100m³/h Working area X 5000 mm, table version for 4 places in X Working range Y 1200 mm Working range Z 125 mm Drill head – vertical 16 drilling spindles, touch probe Main spindle 7.5 kW with C-axis 360 grd. and 18-fold tool changer Adapter units included: – 4 spindly crossheads, – Groove saw unit Chip conveyor belt with chip ejection belt CNC path control IMATRONIC with IMAWOP DXF Interface Complete Machining Deluxe The pictured tools, HSK tool holders, drills, etc. are not included in the scope of delivery!

4 ROLL HYDRAULIC MODEL 2500 X 35 MM MG BRAND MODELM2535 YEAR 2008 plate bending machine top roll 400 mm max plate width 2550 mm capacity thickness 35 mm prebend thickness 30 mm Technical data rolls hardened very high resistance conical plate bending attachment Console electric on wheels with centralized commands Digital position readout, NC controller programmable Opening front side hydraulic drop-end Rerolling system for welded shells rounding. Variable speed working fast/slow. Voltage 380/50 safety and emergency devices manuals along with the machine original

Screening machine Kleemann 18/55-3 Brand: Kleemann Screen area: length 5500 mm, width 1800 mm - 3 deckers Upper deck: sieve opening [] 50mm Middle deck: sieve opening [] 30mm Lower deck: sieve opening [] 20mm Propulsion: 15 kW electric motor Incl.: springs and spring console

Key data: 4175 mm, 1875 mm, 300 mm

Console table with LED suction cup position indicator, 8 manually movable brackets (length 1340mm) each with 3 vacuum cups, 6 support rails Workpiece clamping via vacuum pump 100/140m³/h LED system for vacuum clamps, Z-laser (ceiling laser) for contour display Working area X 4175 mm Working range Y up to 1875 mm (milling with 25mm drm), 1600mm all units Working range Z 300 mm Drill head MPU (with C-axis): 30 spindles: 20 of them vertical ; 10 horizontal drilling spindles, Groove saw max. 200mm drm Main spindle 15 kW, liquid-cooled, with vibration sensor and C-axis 360 grd. , Interface for Flex-5+ unit 18-fold tool changer (plate) at the bottom and 10-fold WZW at the top Adapter unit included: – Flex 5+ sawing, drilling, milling unit Control Power-Control PC 85 with Woodwop 5.0, also for AV station incl. cooling unit in SS Tool transfer station Some of the tools shown,  ...

Item condition: Top maintained Availability: as of now 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control co ...

maximum plate format 1296 x 2083 mm, X-Speed laser head, resolution 2400 dpi, Includes MCU4 multi-cassette autoloader, inline die-cutting system, Creo print console, optionally with Glunz & Jensen online processor model Quartz III 125 (Fuji FLH-ZT Supreme 125 CD), built in 2011, inlet width 1250 mm and Nela multistacker

Plasma cutter, plasma cutter -Max. Cutting current: 120 A -Mains voltage: 3x400 V -up to a material thickness: of 30 mm -Incl. Gas mixing console -Industrial execution -Weight: 600 kg

Feed for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press -Round material feeding system: round steel feeding system with console -Feed: Lenze 2.2 kW drive type MDXMA2M 090-31 -Belt tension: pneumatic -Material tension: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic unit: can be included for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332kg

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

VARIDAMP alcolor dampening CX equipment (additional equipment for cardboard until 1.2 mm) Ultrasonic double sheet control IR Dryer (Delivery) UV Dryer (Delivery) Logistics System Automatic format setting Automatic plate change Automatic washing device Chromed cylinders ALV 2 Double extension delivery Blower ionization on feeder CIPLink Ink profile presetting via CIP3 data ErgoTronic console with ColorTronic "19" TouchScreen Raise 630 mm complete ( feeder ,delivery and gallery) Grafix Hitronic S powder sprayer It's very well maintenance by KBA It's very good condition Available immediately

MAX. SIZE: 320 X 420 MM MIN. SIZE: 75 X 150 MM MAX: 180 CYCLES / MIN HIGH PERFORMANCE BOOK SEWING MACHINE AUTOMATIC SIGNATURE FEEDER WITH 4 UPPER AND 4 LOWER OPENERS PLC WITH TOUCH-SCREEN CONSOLE AUTOMATIC OPENING/CLOSING OF FULL FRONT GUARD VERY GOOD CONDITION AVAILABLE IMMEDIATELY

Machine from 2003, in perfect condition, completely revised, new gaskets AND PAINTED. Maximum cutting thickness (450 N/mm2) mm 4 Cutting length mm 2050 Cutting angle < 2º Engine power Kw 4 Blows per minute 1/min 25 Rear stop motor power Kw 0.55 Working height (F) mm 890 Table width mm 400 Rear stop travel mm 750 Length (U) mm 2800 Width (G) mm 1460 Height (Y) mm 1450 Approximate weight Kg 2100 STANDARD EQUIPMENT: Manual backstop Millimeter square console CE standards

Very good condition sheet metal shear guillotine with little use https://www.baileigh/sheet-metal-shear-sh-5210 This hydraulic shear was one of the machines that got us started and built Baileigh’s quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time. 52” length. 10 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 5 hp motor runs on 220-volt single-phase power. Up to 28 strokes per minute. Adjustable 24” backgauge ensures precise repeatability. Front support arms and table guides keep the material square to the blade. 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material. Single mode: Make one cut cycle per foot pedal push. Auto mode: Continue cycling as you hold the pedal down. This hydraulic shear comes standard with high ca ...

Sale of a complete line for the production of acoustic barriers for roads and railways. 1) A line for the production of containment boxes for road acoustic panels. The line is complete with all components, currently not assembled, but can be viewed upon request. If you are interested we can provide a quote, without any commitment, both for the complete production lines and for the individual parts. Dont hesitate to contact us if you are interested. Obviously the most attractive price is on the purchase of a complete line as the sale of a single component precludes the integrity of the entire line. Machines of production line list: 1) Profile for sound-absorbing panels to be installed on road barriers. 2) Piemme Decoiler. 3) Profiler with 12 transitions. 4) Cutting shears. 5) Roller bench. 6) Control console.

Specifications: Maximum cutting length: 3100 mm Maximum thickness in steel: 6 mm Maximum thickness in stainless steel: 4mm Rear cutting movement: 800 mm motorized stop Manual handwheel for exact approximation Regulation of the separation of the blades Digital display stop position piece counter adjustable cutting length cut line light Automatic stop of the pump motor Front support console and sheet metal bracket

Sells AMADA LC1212 A2 Laser cutting from 1998 With 45,000 hours of operation Laser power 1.5kW FANUC 16-L series console upgraded with LED lighting Possibility of cutting sheets with a width of 1380mm Sold with Delta Neu JetPack 40 vacuum cleaner The machine was serviced by AMADA Its use is daily, giving you the opportunity to see it in action It will be available in mid-November Removal must be carried out by you (conditioning, transport, installation) Sale for purchase of a new machine

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

The complete line for extrusion of OMAM (co-extrusion) film consists of a set of devices that, in combination, enable the processing of thermoplastic materials, mainly polystyrene (HIPS) with a thickness of 0.2-2.5mm and a width of up to 1000mm (for film) and 0.5- 3.0mm and width up to 1000mm (for plates). Equipment production year 1996.   The main elements of the extrusion line are: dispensers TR 120 extruder TR 60 extruder flat head (nozzle) calender roller assembly extraction unit winder mill granulator console thermoregulation switchboard control panel  The maximum length of the extrusion line is 31.45m  Maximum embossing line width 7.88m  Maximum height of the extrusion line 4.01m  Technical data of TR 120 and TR 60 extruders cooperating with each other constituting an integral part of the device            ...

SAHINLER HPK Series bending machines meet the requirements for bending profiles: rolled, extruded, extruded, drawn... whether they are steel, stainless steel, brass, aluminium... These machines provide high level performance with high precision and repeatability, consistently, for the entire duration of their use, requiring very little maintenance. This results in: structural oversizing of the parts subject to stress, the precision of the mechanical parts and the use of high quality off-the-shelf components. - set of 3 rollers made up of 12 flanges & spacers - three-way side corrector cylinders with hydraulic adjustment - 1 mobile console grouping together all the command and control devices. - 1 manometer. - Handling shackle — service keys - Use and maintenance manual in which the manufacturers EC declaration of conformity is inserted - Shaft diameter (mm): 160 - Diameter  ...

Gebr. Hole row drilling machine GANNOMAT Mentor 25 YOC 1999 Motor power: 1.5 kW Rated current: 3.3 A Compressed air connection required: 6 - 8 bar Drill bar with 25 spindles 32 mm pitch Drilling unit can be swivelled 90° Working width: 768 mm Portal passage: approx. 900 mm Drilling stroke: 100 mm Position adjustment drilling unit: 0 - 45 mm Position adjustment of hole row: 0 - 300 mm Clamping height (max. workpiece thickness): 100 mm Tool shank diameter: 10 mm Working height: 850 mm 2 aluminium stop profiles (150 cm each) Fully automatic pneumatic control with foot valve via control console: Clamping + Drilling + Relaxing electr. Intermittent operation pneumatic stop comb Angular Error Compensation System Program selector switch for automatic and leak-out function incl. various drill bits Dimensions: 1.15 x 1.03 x 1.25 m Weight: 420 kg Sold in ACTUAL c ...

Pruning saw for removing defects from wood TechnologieCNC Optimizer CROSS CUT 306 4000mm Description/name of the machine: Sawing saw for removing defects from wood Manufacturer: TechnologieCNC Model: CROSS CUT 306 4000mm Optimizer Year of production: 2023 CROSS CUT 306 Optimizer 4000mm Saw 4 Meter Feeder A professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of woodworking machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs a transverse cut of the material into sections of a certain length with the elimination of material defects marked with a fluorescent crayon and with the help of a s ...

axis stroke (X,Y,Z): 4062, 2,922,660 mm Number of spindle head vertical: 13 St. Number of spindles head horizontal: 6 St. Number of tools: 27 St. Number of milling agregates: 1 St. working dimensions: 3200,1500,200 mm Motor output: 12 kW control: BECKHOFF MASTERWOOD Project 385 (Winner) ------------------------------------- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Short Summary: ----------------------------------------------- Workspace: X = 3200mm , Y = 1500mm, Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible  ...

Features of the PRIMA POWER PLATINUM 1530 HS laser - laser power: 4 kW - maximum cutting thickness (black steel): 20 mm - maximum cutting thickness (stainless steel): 12 mm - maximum cutting thickness (aluminium): 8 mm - independent F axis with the possibility of programming the focus position and nozzle distance - maximum feeds in the X / Y / Z / F axes: 3050/1525/150 / 25 mm - maximum feed speed in the X and Y axes: 100 m/min. - maximum simultaneous feed speed on both X and Y axes: 140 m/min. - capacitive sensor of constant distance between the cutting head and the sheet metal surface - linear axis resolution: 0.001 mm - positioning accuracy (Pa): 0.03 mm - repeatability: 0.03 mm - maximum absorbed power: 55 kW - voltage: 400 V / 50 Hz - minimum air pressure: 7 bar - maximum air consumption: 70 m3/h - average air consumption: 52 m3/h - dimensions of the machine (with  ...

SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...

pressure: 10 t throat: 235 mm stroke: ca. 400 mm stroke speed - idle stroke downwards: 4,5 m/min stroke speed - idle stroke upwards: 10 m/min dayligth: ca. 500/600 mm table-size: ca. 450 x 400 mm ram hole: 32 mm total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 0,95 x 0,45 x 2,1 m Condition: ready for operation: Condition: geometric overhauled: Video available on our website.: Electric 380 Volt: With elect. two-hand control through: separate console: Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! The stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with Mo ...

Full Auto Computer Programmable Sewing Machine, Automatic Size Setting At Feeder and Delivery, Auto Signature Feeder with 4 Upper and 4 Lower Opening Heads, Electronic Programs, Commander With Colour Touch-Screen Console, Staggered Stich, Format: Max: 510x320mm, Min: 120x75mm, Signature Max. Thickness: 4mm, Signature Lenght: 120-210mm, Signature Width: 75x320mm, Stiching Lenght: 16,5mm, Max. Mechanical Speed: Max. 200 Cycles/Min., 12000 Cycles/Hour, ASIR Automatic Signature Image Recognition Control System, Belt Delivery

Roll enlargement and slitting unit The equipment consists of: Walking conveyor Roll turner Unwinder trolley Unwinder Two-position scraper bender Correct-feed rollers Centering rollers No. 1 (RC 8 x 1600) Sheet straightening machine (5x230x1700) Roller conveyor with pressure roller Guillotine shears No. 1 (NNR 10-1700/2) Cleaning device Centering rollers No. 2 Complex for butt welding of strips L-1700-M-Sh Pulling rollers No. 1 Loop table No. 1 Centering rollers No. 3 Pulling rollers No. 2 Centering rollers No. 4 Disc shears Edge-crushing shears NKP 4-500 Roller conveyor idle Loop table No. 2 Separating device No. 1 Pulling rollers No. 3 Guillotine shears No. 2 Device for lane separation No. 2 Winding device Winder assembly Winder pinch roller Folding winder support Winder unloading device Unloading cart Column with rotary console

HPM GV 3x1.5 plasma cutting machine With Hypertherm HPR 130 XD and automatic gas console Recently serviced, new torch lead Nice condition Has a CNC fault, sold as spare parts only, hence the low price

Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

CNC Gantry Plasma Cutting Machine Manufacturer: Koike Type: Deltatec 3000 Year of construction: 2019 CNC Control: Katana 1 plasma torch with power source Kjellberg HiFocus 161i neo with automatic gas console 1 oxy-fuel torch Extraction table: size 2x6 m Track length: 9 m Laser Pointer for Plate Layer Detection Filtration system Cutting software SigmNest

Kunzmann Universal Milling and Drilling Machine WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Almost new, used only for demonstrations. Immediately Available Ready for transport in pallet Manufacturer: LAMINA Model: GLUER GL 1400 Largest format: Width: 1400 mm Smallest format: Width: 70 mm Length: In principle without limitations. Gluing unit: Type Nordson Mesa Production speed: 0 – 40 m/min, infinitely variable. Motor: 0,75 kW Installed capacity: 400 V, 3-Phase, neutral, PE, 50/60 cycles Total installed power: 7,2 kW incl gluing unit Compressed air: 6 Bar Control console: PLC control with Touch Screen Oil– and waterfree air

- Working range / cutting width approx. 2500 mm - Working range / cutting length at approx. 8 m - Control BACH type MyBach - Track gauge approx. 2850 mm - Plasma torch with height adjustment - Plasma source KJELLBERG Hi FOCUS 280 i Plus - Cutting current at 100% ED 10 - 280 A - Cutting range steel approx. 5 - 60 mm - Cutting range aluminium approx. 5 - 30 mm - Cutting range stainless steel approx. 5 - 30 mm -Auto. Gas console - Connection 400 V - Extraction table with extraction system TEKA 12 x 2 m - Extraction system TEKA FC 4 H with spark separator - Weight approx. 8 T