console used for sale

Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across  ...

The T300 tablet press is a rotary press that compresses solids and is equipped with 40 punch stations. The exact characteristics of the press machine vary according to the type of punch chosen. Technical data: Length mm 1280 Width mm 865 Height mm 1850 Net weight Kg 1920 Power A 12 Frequency Hz 50 Voltage Volt 380 Productions characteristics: Machine speed 260,000 tablets / h Max. tablets diameter 13 mm Filling depth 2 – 16 mm Min. production 12,000 tablets/h Max production 300,000 tablets/h Mould external diameter 24.01 mm Mould height 22,22 mm The T300 is a rotary tablet press equipped with two pairs of pressure rollers, one for pre-compression, the other for main compression. The operator side of the press is mainly in the front part of the machine where the four manual wheels, the control elements and the console are located. The press is fed from the top, ...

Concrete removal robots for horizontal flat milling Consisting of: Robot base suspension, with modular system up to 8 m, with integrated hydraulic system, with control unit (control bottle) with working device and attached lance console and jet lance 700mm electric motor

CtP VLF Platesetter Manufacturer: Kodak Model: Magnus VLF Year : December 2009 Kodak Print Console with PC Plates issued: approx. 125,000 Speed 10 plates / hour Autoloader with 4 cassettes for 40 0.40 mm plates each. 125 development machine from G & J automatic plate stacker Avialable: 09/2021 Price on request

columnar swivel crane #5016 Capacity: 80 kg Total height: 3.25 m Lifting height: 2.5 m Console length: 2.5 m Voltage: 380 V

Microbox PC SIMATIC IPC 427E, 6AG4141-3CC05-0DA0, Siemens, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Microbox PC SIMATIC IPC 427E, 6AG4141-3CC05-0DA0, Siemens - Incl. 19" flat screen incl. wall bracket + mounting accessories for control cabinet - Incl. keyboard + keyboard console and mounting accessories for control cabinet 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for dire ...

Operating hours: 1,265 h 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control console for convenient set-up - Co ...

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

Profile bending roll hydraulic Sertom PP Output shafts size 180 mm -pre-tensioning brackets between the 3 rolls Traction tooling to bend HEB / IPE on the hard side -Lower rolls driven motorized -Top roll hydraulic pinch- bending Beivhd0xri -Top roll size 600 mm -Side rolls size 520 mm Adjustable rolls to seat and bend the different size of profiles -MAX. CAPACITY -Angle 180 mm leg-in/out- -iron bar on edge 170 mm- -Iron bar on flat 350 mm- T section 160 mm- -Pipe 8,5” inch - -Beams HEA300 - INP360- Weight of the machine 15 Ton -SIDE ARMS OPERATED IN 3 DIRECTIONS WITH DOUBLE ROLLERS- -OIL RESERVOIR WITH COOLING UNIT – -CONSOLE WITH DIGITAL BENDING POSITION AND PROGRAMMABLE READOUTS -MACHINE CLEANED AND GREASED –CONTROLLED AND TESTED UNDER POWER FULLY WORKING

-Plate rolling machine rubber urethane pinch roll 1-one-pass rolling with pre-bending -Plate sheet width max. 3000 mm -Plate thickness 2 mm depending on the material hardness -fully hydraulic operated with power unit self enclosed - 9 Kw electric power 400Vac/50 Top shaft size 110 mm -Lower roll size 380 mm urethane coated rubber -Hydraulic front opening for the unloading of closed shells. -Upper beam with adjustable pre-load to compensate the deflection of the top roll under load. -Console electric manual/automatic work sequence with digital readout. - EQUIPMENT INSTALLED WITH THE MACHINE -Vacuum cups lifter plate width 3000 mm -Automatic feed pusher plate sheet loader into the rolls- -Side support hydraulic operated with conveyor belts motorized cradle system, all parts rubber coated to protect the plate surface from scratches.

Vehicle: • Make: Nissan – machine overhauled 2023 • UVV Audit 11-2023 • Type: EGH02 F30U • Drive type: Diesel • Engine: Nissan 4 cyl. • Transmission: Automatic • Load capacity: 3000 kg • Load center: 500 • Lifting height: 3300 mm • Hours: 6557 • Internal no.: 03122023 Mast data: • Mast: Duplex with free lift and side shift • Lifting height: 3300 mm • Fork carriage: 1200 mm • Fork length: 1200 mm • Fork width: 100 mm • Fork thickness: 50 mm Dimensions: • Length: 2530 mm • Width: 1120 mm • Overall height: 2050 mm • Weight: 4390 kg Battery: NEW Tyres: • Front tyres: solid rubber tyres • Rear tyres: pneumatic tyres Attachments & special equipment: - Longer forks are available at an additional cost - Operating instructions available Extras: Preparation for road approval Mirror 3 Auxiliary h ...

Label dispenser,HERMA,standing on foot console,max. label H100 mm.

Rapid mixer,stainless steel,standing on foot console,Ø 1045 mm

weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4070 mm y-travel: 1185 mm z-travel: 1985 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6000 x 4500 x 4000 m Consisting of: Working Range: Measuring column, longitudinal movement, X Axis 4,070 mm Measuring slide, cross, as Y Axis (measuring head) 1,185 mm Measuring slide, vertical, as Z Axis (vertical) 1,985 mm Adjustment of measuring head, roll axis 360 ° pitch axis 220 ° Measuring table 5,000 x 2,000 mm Weight, approx. 15,000 kg Space required 6,000 x 4,500 x 4,000 mm Accessories / Special Features : o 3D tracer head, with turning/swivelling device. o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and  ...

Semiautomatic welding machine for pipes TiG OERLIKON in a complete set with: - OERLIKON CITOTIG DTW 255 welding machine -electrical cabinet -console -swivel - the maximum working area is 2m The semi-automatic machine is used for welding pipes with the TiG method. Technical condition - good

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3.650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band sa ...

We offer a Doka Framax 270 wall formwork complete with accessories 270.81m² The formwork is in original Doka rental warehouse quality, partly newly covered with original Doka Xlife formwork. Controlled and sorted. Suitable for higher-value applications. Accessories original Doka rental warehouse quality. Exposed concrete class 2/3 possible without any problems. New value approx. 203397,00€ Special net price 75421,00€ 12 588109500 Framax Xlife element 2.70x2.70m 10 588103500 Framax Xlife element 2.40x2.70m 10 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 4 588122500 Framax Xlife-Uni-Element 0.90x2.70m 8 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 8 588106500 Framax Xlife element 0.45x2.70m 8 588108500 Framax Xlife element 0.30x2.70m 8 588130500 Framax Xlife inner corner 2.70m 8 ...

We offer a Doka Framax wall formwork 201m² in original Doka rental warehouse quality. Special net price 46700,00€ + VAT New value approx. 146166€ Complete with accessories, also original Doka rental warehouse quality. Formwork completely cleaned, inspected and sorted. Formwork lining original Doka Xlife exposed concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Partially reassigned. 10 588103500 Framax Xlife element 2.40x2.70m 16 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 8 588122500 Framax Xlife-Uni-Element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 6 588106500 Framax Xlife element 0.45x2.70m 6 588108500 Framax Xlife element 0.30x2.70m 4 588130500 Framax Xlife inner corner 2.70m 4 588126000 Framax outer corner ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 217800 € : 4000x2000 mm : 37 kW : bei Wasserstrahl : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4136 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 H ...

We sell here the Robot Coupe Blixer 45 A, 45 L, as can be seen in the pictures, with the accessories shown. This device gives you two features in one! : The Blixer combines the features of two well-known devices in one - that of a cutter and that of an emulsifier-mixer device. It makes it possible to mix all kinds of raw and cooked foods into liquid, semi-liquid or pulpy end products Efficient: Thanks to its large liquid capacity and its lid with wiper and sealing ring, this appliance allows you to prepare all kinds of mixed food and even tube feeding. Reliable: Knife with patented new blade profile for optimal cutting quality. Regular cutting and guarantees perfectly uniform processing even with the smallest quantities. This device is equipped with 2 blades as standard, but can be optionally extended to three blades. The third blade can be ordered for an extra charge. Due to th ...

Reference ID PP-39952 Category 6-Colors Manufacturer Heidelberg Model CD 102-6+LX2 Year Built 2015 Color 6 Impression 118 Working Hours - Speed 15000 sheets/h Max. Size 710 x 1020 mm Min. Size 340 x 480 mm Condition Good Location Europe Availability Immediately Machine Description 6 colors and varnish Prinect Press Center Compact - control console Preset Plus feeder All cylinders use new technology of special compact bearings Digitally controlled Alcolor thin-film dampening unit Chambered blade system with features that enable replacing anilox rollers with One Anilox roller: 10 cm3/m2 (120 lines/cm), Chrome-plated blanket cylinder with a 3.2 mm undercut, Chrome-plated double-diameter pressure cylinder, Preset Plus X2 delivery Device for automatic washing of rubber blankets (brush system), pressure cylinders (brush system) and inking rollers CombiStar Compact Dr ...

Oxycutting gantry Brand: SATO Model: SATRONIK HD 8000 8 Oxycutting torches (2 TRIPLEX torches) SATO control with gas console. Year: 2000 Useful cutting capacity: 6,000x24,000mm

4 ROLL HYDRAULIC MODEL 1000 x 22mm CNC EVO GRAPHIC 4AXIS PROG PLATE BENDING ROLL PLANETARY DOUBLE PRE-PINCH PLATE PRE-BENDING capacity: -Width of plate: 1000 mm -Thickness of plate rolling 22 mm -Thickness of plate pre-bending 16 mm minimum bending diameter ID 280 mm depending on the plate thickness vs. yield strength Rolls -Surface length mm. 1050 -top roll mm. 250 -lower roll mm. 260 -Power electric 15Hp on centralized hydraulic unit , voltage 3ph Vac 400/50 Configuration installed • Hardening of the 4 rolls , very high resistance against wear. • Central rolls both driven powered with axial gearbox and direct drive hydraulic motor. • Calibration system for the re-rolling of welded shells rounding unwanted flat spots. • Console electric on wheels with centralized commands joysticks CNC position r ...

We offer a position Doka Framax Alu 186,759m² in good ready-to-use condition with up to 75% discount! Partially new formwork - new value = 176.805,40€ Special net price 53.512,74€ Formwork completely cleaned, inspected and sorted. Formlining exposed concrete class 2/3 or newly covered with Finply formwork. Out-of-the-box, suitable for higher-value use. Pcs. Designation 28 Alu-Framax Xlife-Element HK 0.90x 2.70m 3 Alu-Framax Xlife-Element HK 0.90x 2.70m – newly occupied 3 aluminium Framax Xlife element HK 0.75x 2.70m 1 aluminium Framax Xlife element HK 0.75x 2.70m – newly occupied 15 Alu-Framax Xlife-Element HK 0.60x 2.70m 5 Alu-Framax Xlife-Element HK 0.60x 2.70m – newly occupied 10 aluminium Framax Xlife element 0.45x 0.90m 3 Alu-Framax Xlife element 0.45x 0.90m – newly occupied 3 aluminium Framax Xlife element 0.30x 2.70m 7 Alu-Framax Xlife el ...

CNC EMCO Turn E45 machine with Siemens console + IEMCA bar feeder Boss 545/21 2011 perfect quality

Specifications: - Boom length approx. 6 m - 5 joints - Suction pipe diameter 125 mm - Wall connection – console - Weight approx. 100 kg

Wall swivel crane make STAHL type PW 125 kgMachine -No: 68543/12011 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...

Wall swivel crane make STAHL type PW 125 kgMachine -No: 69840 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Power: 11kW, operational hours counter: 8154h, with assembly console.

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw ...

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

CNC for doors or stairs Boom machine with console table 4-axis x- axis 5000 mm Y-axis 1350 mm z- axis 450 mm a- axis 190 degrees Double occupancy at the table Machine has run little

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 25 mm - Grinding wheel bore approx. 51 mm - Disc speed 1450 rpm - Drive 400 V / 0.7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

Chauvin screening machine 21/50-1 Screen area: 5000 x 2100 mm - 1 decker Screen opening: 55 x 70mm Drive: Electric motor 11 kW Incl.: Springs with spring console & steel base.

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

Screening machine Sandvik 18/65-2 Brand: Sandvik Type: CS 108 D Screen area : 6500 x 1800 mm – 2 deckers Drive: 22 kW electric motor Incl.: springs & spring console.

ECKERT SZAFIR BL2 3D plasma-gas cutting machine was manufactured in Poland in 2016. The plasma cutting machine uses a plasma beam generated by a highly efficient KJELLBERG Smart Focus 200 aggregate with a power of 200 A to precisely cut workpieces made of mild steel, stainless steel and aluminium. Stability during machining is ensured by the machine’s high-quality steel portal, which was additionally extended by 700 mm to allow easy loading and unloading of larger metal sheets. The plasma-gas cutting machine guarantees a high level of safety and operator comfort, thanks to a sectional extraction table with a length of 6000 mm and a width of 2000 mm, which is used to eliminate the dust produced during cutting. The plasma-gas cutting machine is also equipped with among others a CNC ECS 872 controller with a 15″ touchscreen, a WALTER SKTG 11 P COMBO screw compressor and a WALTER WDF  ...

Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed

Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton ...

Bending capacity: Plate width: 3000 mm Plate thickness 140 mm Thickness max 200 mm depending on plate width and yield strength Technical data: 3100 mm Surface useful length on rolls 940 mm size of Top roll 840 mm size of Lower rolls 210 mm max thickness opening between the rolls 400/50 Vac voltage - rewirable 480/60 220 Hp Power electric installed Configuration installed with the machine Hardened surface of the 3 rolls. Conical plate bending hydraulic attachment with hardened contrast pad. All the 3 rolls driven with axial gearbox and motor each roll independent Calibration system for the re-rolling of welded shells rounding unwanted flat spots. Console electric on wheels with centralized commands joysticks and digital readout. Opening front side hydraulic drop-end to unload closed shells. Variable speed working slow/fast. Emergency systems  ...

FUJI CR-IR 363 System 4x Stacker for CR-Cassette inc. PC / High Resolution Monitor / Keyboard / mouse ADVANCE Console / DR-ID 300CL APL. Software V8.0 / # INCL. MAMMO SOFTWARE OPTION # tested some CR Cassette ́s exw Germany

Specifications: Manufacturer: BITO Type: PL 38 (adjustment grid: 75|75 mm) The scope of delivery includes: 01 x Console, used Material color: sendzimir galvanized Opening dimension: 47x51 mm 02 x Nut M8 02 x washers Ø 8,4 02 x Screws M8x20

Motor: 7.5/9.5kW, control panel at eye level, spindle ø30, table extension and spreadfront, console feed, feed jaw with digital readout Optional: Haffner 4 Roller Feeder

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Specifications: Manufacturer: Dexion Type: P90 The scope of delivery includes: 01x Console for push-through protection, used Material color: sendzimir galvanized consisting of: 01x bracket, used 02x internal parts, used 02x hex bolts M10x25 02x nuts 02x washers Ø 10,5

: neu : 2023 : 9691 : Mai 2023, Zwischenverkauf : Türkei : 29670 € : 85 mm : 247 mm : 3 : 7.5 kW : 80x20 mm / 500 mm, 30x10 : 120x30 mm / 650 mm, 50x10 : 50x50 mm / 500 mm, 30x30 : Ø 50 mm / 500 mm, Ø 20 mm : Ø 100x2,5 mm / 1.300 mm, : 80x40x4 mm : 70x70x4 mm : 80x8 mm / 1.200 mm, 30x3 : 80x8 mm / 800 mm, 30x3 mm : 1580 mm : 1200 mm : 1410 mm : 2350 kg 3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation Control console forfor- andbackward drive machine and equipment according to theCE regulations INCL. OPTION: CONTINUOUS SPEED WE HAVE MORE THAN 235 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The motorized bending machine is in used condition and is fully functional. Ideal for the production of round or square air ducts. -Incl. Console to edit material in roll form - incl. double foot switch for clockwise and clockwise rotation - Usable width 1000 mm - Roller diameter 56 mm Condition see pictures. Visit and demonstration possible. The indicated price is a net price for collection ex works. A chargeable transport within Germany can be organized on request.