We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,224 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Pressure gauge, Bourdon tube pressure gauge, pressure gauge, pressure gauge with Bourdon tube, 8 pieces WIKA 0 - 10 bar EN837-1 Measuring range: 0 - 10 bar Ø 40 mm Class: 2,, 5 Scale division: 0.5 bar Process connection: G 1/8 B Mounting position: vertical Connection position: bottom Material: Housing: Plastic, Measuring system and connection: Cu alloy Other quantities on request ! New ! Dimensions ( pressure gauge ): 40 x 59 x 25 mm
used
Pressure gauge, Bourdon tube pressure gauge, pressure gauge, pressure gauge with Bourdon tube, 6 pieces TECSIS 0 - 40 bar Measuring range: 0 - 40 bar Ø 40 mm Class: 2,,5 Scale division: 2.0 bar Process connection: Ø 8 x 27 mm Mounting position: vertical Connection position: bottom Material: Housing: metal, measuring system and connection: Cu alloy Other quantities on request ! New ! Dimensions ( pressure gauge ): 40 x 70 x 27 mm
used
Socket distributors, site power distributors, connection cabinets, power distributors, damp room distributors, wall distributors, power distributors, power connection boxes -Power distributor: wall distributor power connection box -FI circuit breaker: 25/63/100 A -Sockets: 2x 220V -Individual components: see photos -Dimensions: 300/180 / H765 mm -Weight: 11,2 kg
used
Pressure washer without accessories Dr. HARTMANN, KULBA BAUCHEMIE Wap® 5100/j connection ( input ): 3/4 ( inch ) male thread connection ( output ): M21 x 1,1,5 male thread motor: 2.0 kW 2800 rpm 230 V 1 AC 50 Hz approx. 4.0 m connection cable used, tested ! Dimensions ( without cable ): 380 x 240 x 240 mm
used
Pressure washer without accessories KRÄNZLE IRONSIDE® 105 Working pressure: 105 bar Connection ( input ): 3/4 ( inch ) male thread connection ( output ): M22 x 1,, 5 male thread motor: 2.3 kW 2800 rpm 230 V 1 AC 50 Hz approx. 3.5 m connection cable used, tested ! Dimensions ( without cable ): 540 x 220 x 360 mm
used
Centrifugal pump, water pump -Delivery rate: 18 m³/h -Motor power: 1.1 kW -Connection: 380 V -Speed: 1400 rpm -Pipe connection inlet: DN Ø 64 mm -Pipe connection outlet: DN Ø 49 mm -Dimensions: 410/250/H300 mm -Weight: 34 kg
used
PLC extension module, switchgear, control -Outputs: 8 -Type: IB STME 24 BDO 8/3 -Connection: 24 V DC -250 mA -3-wire connection technology -Protection class: IP 20 -consisting of: terminal part with tension spring connection and module electronics -Dimensions: 116/80/H115 mm -Weight: 0.4 kg
used
Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW -Speed: 2840 rpm -max. volume flow: 0.41 m³/h -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm -Impeller: Ø - mm -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg
used
Centrifugal fan, dust extraction fan, fan, extraction, dust blower, welding fume extraction -Motor power: 0.37 kW -Speed: 2800 rpm -Connection input: Ø 115 mm -Outlet connection: Ø 115 mm -Impeller: Ø 300 mm - Connection: 400 volts -Dimensions: 400/600/H450 mm -Weight: 21kg
used
High-pressure centrifugal fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure fan, vacuum fan -Aggregates come from a UV paint drying -Motor power: 0.43 kW -Connection: 3-phase -Speed 2800 rpm -Volume output: 22.5 m³/min -Pressure increase: 580 Pa -Connection input: Ø 120 mm -Outlet connection: Ø 160 mm -Number: 2x fans available -Price per piece -Dimensions: 530/350/H300 mm -Weight: 10kg
used
Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...
used
Overview The in-line palletizer was built in 2006 by the German company Beyer and can be converted to any customer-specific crate format. Technical details Output: max. 200 cycles/h Set up for VdF crates, the machine produces 32 bottles per cycle, i.e. 32 x 200 = 6,400 bottles per hour With a beer crate, it would be four crates of 20 or 24 bottles/crate per cycle, i.e. 80 - 96 x 200 = 16,000 - 19,200 bottles/h Machine weight: approx. 3,000 kg Power connection: 400V, 3-phase, 50 Hz Connected load: 6.6 kW Air connection: 3/8 hose connection Height 3150 mm Width: 2400 mm Length: 2500 mm Height of box conveyor approx. 800 mm Pallet transport height approx. 400 mm Support feet D = 100 mm, M24 threaded spindles Stainless steel base frame Control system Siemens Simatic S7-300 Visualization Siemens OP7 SEW frequency inverter (Movidrive MDX61B) Control cabinet IP 55, according to VDE regulati ...
used
Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...
used
Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), stainless stee ...
used
Used Complete Bottling Line Alfatek 2018 HPE HIGH PRESSURE ELECTRONIC MONOBLOCK FILLER CROWN CAPPER ALFATEK Mod 9 1 Machine suitable for bottling fermented beer in the autoclave The complete bottling line for wine and beer is supplied ready with connection points for air product discharge point and electrical connection Max production 900 1000 BPH with carbonated product e 0 33 cl bottles Maximum valves flow rate l h 1250 Maximum machine rotation speed 400 2000 Filler pitch diameter 600 mm Pitch capper diameter 410 mm Maximum bottle diameter 115 mm N B Production may vary according to the type of product to be bottled bottling pressure product temperature type of bottle etc Condition of the beer product a constant and adequate pressure b constant temperature 0 2 c rested product not overflowing The monoblock is composed of FILLER Series BHPE ELECTRONIC ISO BARICA HIGH PRESSURE 9 valves S ...
used
Capacity: 20000 l/h, CO2 connection pressure: 10 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Operation / Control: Control voltage 24 V DC, Features: Saturation Tank (d = 750 mm) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils
used
We offer Kaeser compressed air system consisting Schraubenkompressor.SC 1211, dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter SG 0192, Sigma compressed air management system, Kaeser oil-water separation system and control cabinet The compressed air system is used to supply compressed air to a production hall. It was built or extended from 1995 - 2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the hall use. The system must be serviced and inspected before it can be put back into operation. The system consists of the following components: 1. Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control 2, Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Year 1995 704 kg 4 ...
used
This is a slicer from the manufacturer ADE type Juwel 2 with a 230V connection. The slicer has a 300mm slicer with Teflon coating and is suitable for cutting sausages and also for cutting cheese (no sticking of cheese to the knife). The models of the Juwel series are high-performance professional cutters that are suitable for the intended continuous operation. The cutting thickness is infinitely variable from 0 to 15 mm and particularly fine between 0 and 3 mm. The sophisticated drive technology with its air-cooled, maintenance-free motor and extremely quiet drive is also impressive. The machine is new and unused, but no longer in its original packaging (exhibition piece). OUR SERVICE FOR YOU: - 12 months warranty on all electrical parts - High-quality branded appliances at fair prices - Professional Overhaul / Inspection & Professional Cleaning - Tested & fully functional - ...
used
Key data: 430 mm, 744 mm
Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...
used
table length: 3000 mm table width: 1500 mm burner heads: 1 Control: Trumpf total power requirement: 73 kW Laser cutting machine Trumpf TruLaser 3030 Lean Edition Laser power 3200W Type L 20 Year of construction 2012 Net 400V/50Hz Total power requirement 73 kVA Control voltage 24V Fuse 3 x 125 A Air connection 7-10 bar Nitrogen connection 30 bar Oxygen connection 20 bar Beam one hour 7755 Laser one hour 25263 Machine is in very good condition and optimized by Trumpf in 12/2022. Documentation: Completely available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...
used
Glue pump with heating including temperature control Drive type: pneumatic Control type: electric 5/2 solenoid valve Delivery rate per double stroke: approx. 33 cm³ (Water) Delivery rate at 2 Hz: approx. 4 l / min (240 l / h) Operating pressure: 3 - 6 bar Compressed air connection: plug nipple NW 7.2 Connection medium: hose nozzle 19 mm Suction tube length including suction base: 420 mm Waterproof according to IP66 Pump head: ABS Pump base: POM Riser pipe: stainless steel Suction base: stainless steel Valve balls: stainless steel Seals liquid part: FKM Electric voltage: 220-240V / 50/60 Hz Electrical connection: incl. Schuko plug Cable length: approx. 2 m More then 300 machines new and second hand on our seema .de
new
Pre- and post-heating coil, air heating element, DN125, 371550, LHE 125 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Dimplex - 371550 - LHE 125 IS Air heating element Electric pre- and post-heating. 0.75 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +30°C, air flow monitor for detecting the smallest air flows at minimum operation and two safety temp ...
used
Number of motors: 3 Stück 0: 2200 mm Control: ja 0 0: Ja 0 Dimensions (L/W/H): 3400x800x1600 mm STRIFFLER double glass bead miter saw 2750 E --------------------------------- with electronic positioning device Cutting length in special version: 2200 mm Min. cutting length: 254 mm Saw feed is pneumatic, infinitely adjustable with oil brake cylinder Length adjustment by recirculating ball - threaded spindle - servo Motor drive and electric. Positioning device Cutting angles 90° and 45° against adjustable fixed stops, Intermediate positions adjustable according to scale. Clamping device from the front up to a maximum workpiece thickness of 65 mm Clamping device from the front and from above up to a maximum workpiece thickness of 65 mm up to a maximum workpiece height of 50 mm Connection for suction diameter 50 mm Electrical connection: 3 m cable for 380 volt, 6.0 amp plug. Electrical cir ...
new
Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...
used
DSB Singlehead NG XM / DSB 350 series Rated power of the main drive 32 kW Connection voltage 3 AC 400V / 50 Hz 3 AC 480V / 60 Hz 3 AC 575V / 60 Hz 3 AC 210V 50 / 60 Hz Max. cutting width 350 mm Band saw blade tension servo-pneumatic Band gear adjustment (band gear visible in the sight glass) Automatic adjustment of the belt run Feed speed, continuously adjustable (depending on Depending on the type of wood and dimension of the block) Standard feed rate: from 4 to 20 m/min Precision feed rate: from 1 to 15 m/min High-speed feed: from 8 to 45 m/min Band saw speed, infinitely adjustable Up to 60 m/s Diameter of band saw guide discs of band saw 915 mm Adjustment of band saw cutting height From 1.7 to 165 mm Band saw blade guide with increased durability Durability Carbon guide Compressed air connection Working pressure 7 bar Water connection 1/2 Cdooj7rci Required su ...
used
1 piece dosing filler type K 12”, - without control cabinet, for filling thin or viscous products into glasses., Glass size: 28 g glass Ø 44.5 x 51.4 mm height TO 43, Product: fruit spreads, jams, ketchup, mustard etc., Product pieces: up to 10 x 10 x 10 mm, Filling temperature: up to approx. 85°C, Dosage range: 25 to 250 ml, Performance: depends on product and glass size, up to approx. 120 fillings / min., Product tank: 120 liter capacity instead of 45 liters, The dosing filler is specially designed for filling thin and thick liquid as well as pasty products, suitable. It can be a partial dosage or a full filling in cans, jars and, bottles., Depending on the product, the filler can be used for cold or hot filling., The system is constructed in a completely rust-free design. The dosing filler does not have its own, Belt body and can therefore be attached to an existing conveyor belt. ...
used
Electricity: Single phase 230v / 5kVa / fuse 25 A / wires 4 mm 50/60 hz The electricity consumption for an 8 hours shift is approximately 2500W x 8h = 20kWh. Cooling water: Since the cooling unit (stainless steel) is a closed water-circuit, there is no water consumption (after a one-time fill). Minimum pressure: 1 bar (15psi) Maximum pressure: 3 bar (45psi) Temperature: between 13°C and 18°C Quality: lime free and reusable Inlet Connection: inch Outlet Connection: inch Compressed Air: Typical consumption of compressed air is 200 Nm / h (120 cfm), with a maximum consumption of 450 Nm / h (300 cfm). Minimum pressure: 6 bar (90 psi) Maximum pressure: 10 bar (145 psi) Quality: iso 8573.1 air quality standard Connection: 1.5 inch
used
This Rational UltraVent hood for Rational combi steamers, including connection kit, fits the CMP, SCC 61/101 electric combi steamers from 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 3.696 € net. The indicated price is net, plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back ...
used
This Rational UltraVent hood for Rational combi steamers, including connection kit, fits the CMP, SCC 61/101 electric combi steamers from 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 3.696 € net. The indicated price is net, plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back ...
used
This Rational UltraVent hood for Rational combi steamers, including connection kit, fits the CMP, SCC 61/101 electric combi steamers from 2011 to the present (index H+I) suitable for CombiDuo systems (individual use is also possible). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 3.696 € net. The indicated price is net, plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional Overhaul / Inspection & Professi ...
used
Description: STRAMA camshaft cleaning system The cleaning system is suitable for cleaning camshafts or parts with smaller physical dimensions. , Camshaft cleaning was last carried out on the system. The machine is currently out of service. A brief description of how the machine works: A handling robot with a 3-finger centric gripper takes the camshafts automatically. The robot feeds the camshaft to the cleaning, drying and vacuum drying stations one after the other. The cleaned and dried shaft is then automatically deposited by the robot in a removal station. , The cleaning system consists of the following components: Transfer with robot from workpiece carriers Cleaning stations: Cleaning, blowing off / drying and vacuum drying Removal station (depositing by robot) Handling robot with gripper (robot type: KUKA, KR30-3 Foundry) Soundproof enclosure Tank, filter and pum ...
used
Second-hand wide belt sanding machine Make Heesemann Type MFA Impression not rebuilt - without guarantee Year of construction 2010 Technical specifications: Sanding width 1,350 mm - cross sanding unit with pressure lamellar belt system - combined longitudinal sanding unit with calibration roll - longitudinal sanding unit - structuring brushing unit - dust removal brushing unit - 3 pressure beams with computer-controlled selective pressure control system CSD Distance of the control rollers 21 mm Feed speed: 3 - 15 m/min. Working height constant 880 mm motorized adjustment to the workpiece thickness 3 - 150 mm 1 pressure roller Ø 50 mm swinging, in the infeed of the machine including workpiece oversize control Roller table in the infeed of the machine 1 industrial PC 10.4 with program memory for 100 programs 1 cross sanding unit Abrasive belt ...
used
Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedia ...
technical data: Make: Siemens Types: 006 725 - 4 Type No: E 50804955 Connection: 22.5 A / 21.0 A / 19.6 A kW: 4 kW / 4 kW / 0.032 kW Rpm: 4300 rpm / 2850 rpm / 23 rpm Built-in Siemens engine: Type: 1 LP 2015 - 2AA / Type No: E 5078685 Connection: Star 380/220 kW: 0.18 RPM: 2710 Remark: Tropical Festival
used
Cat. No. 11-3600-1 New V2A storage tank / combination tank / stacking tank with cooling jacket - 1000 + 500 litres Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (Basei): 1000 litres top (stack): 500 litres Base tank height (bottom): 2085 mm Stacking tank height (top): 1050 mm Total height: 3135 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 ...
used
Cat-Nr. 12-2765 in a very good condition With Cooling Jacket Surface: Outside and Inside: 2B=IIIC Upper Bottom: With Manhole Lid round 400 mm with Clamp With Inlet Connector DN 25 Tank Body: Mit Threaded Connection for Cooling Jacket DN 23 Lower Bottom: With Flat Conical Bottom with Central Outlet With Outlet Discharge DN 65 reduced to DN 50 Butterfly Valve With Threaded Connection with Outlet on Cooling Jacket DN 15 Measurements and Weight: Height x Diameter: 1560 x 1220 mm Height Tank Body: 960 mm Weight: 270 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Cat. No. 11-3600-9 New V2A storage tank / combination tank / stacking tank with cooling jacket standing round on feet Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (base): 500 litres top (stack): 500 litres Base tank height (bottom): 1335 mm Stacking tank height (top): 1050 mm Total height: 2385 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905- ...
used
Cat. No. 12-2070 in very good condition Material: V2A – AISI 304 (1.4301) – Surface: inside and outside 2B=IIIC Upper Bottom: With ventilation hose DN 350 With weld-on fitting centrally located on upper bottom DN 65 With T-distributor threaded connection, one side DN 25 other side DN 50 With 2 crane lugs Tank Body: With manhole lid 450x350 mm With connection flange DN 300 for agitator on the side With connector for spray ball under the agitator Lower Bottom: With outlet DN 100 centrally located On 5 adjustable feet Measurements and Weight: Length: 5450 mm Tank Body Height: 3900 mm Diameter: 3300 mm Weight: ca.3,5 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on d ...
used
Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D conector 25pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation
used
Data sheet / Offer spare Monitor Heidenhain Controls TNC 131, 135, 145, 150, 151 Overview: - 8,4 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by 24pol. Centronics conector he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation
used
Data sheet / Offer spare Monitor Heidenhain Controls TNC 155,355 Overview: - 12,1 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by 15 pol. SUB-D conector he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation
used
Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...
used
Diesel tank gas station tank plant. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 30,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder HDMeco 80 Diesel pump with tank data acquisition for 100 users Flow capacity max. 77 l/min PC software Windows, also Windows 7, USB interface incl ...
used
Used line for the production of the co-extrusion by PST Forming method. PTI - The twin screw extruder DS 92/28 2x screws with a diameter of 92 mm The length of screws 28 x L / D Snails closed system with internal temperature control, deep nitrided, with degassing on the cylinder, extruder equipped with a vacuum pump with filter, Siemens Servo Motor power: 60 KW Torque: Nm 15700 Screw rotation: 0 - 50 rev. / Min. Zones with ceramic heaters with an intense cooling: 5 x 5 KW Cooling Zones: 4 Performance with hard PVC, depending on the materials and tools: max.600kg / h Length: 4500 mm Width: 1600 mm Height: 2300 mm Extruder equipped with a microprocessor control SIEMENS type Extrusion Pro Pak visualization 2. Co-Extruder PTI - The twin screw extruder DS 68/28 Snails with a diameter of 2 x 68 mm Length of the screws: 28 x L / D Snails cl ...
used
Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges ...
used
Specifications (manufacturer): -Manufacturer: Miele / Germany -Model/type: T 6250 - Fabrikationsnr.: 25375347 -Part No.: 52625001 -Built in _ -electrical connection: 3 ~ 380V 50 Hz 10.0 A -electric power consumption approx. 14.30 kW -Re circulation dryer exhaust air recirculation with automatic reversing system -Drying capacity: 10 kg in 35 min cupboard dry -electronic measurement of residual moisture -large filter with optical display -Crease protection -Capacity dry: 10 kg / filling ratio 1:25 / 1:20 -Evaporation performance max 13,5 L / h -2 Motors (drive and blower) -Drum capacity: 250 L -Heating capacity: 13, 5kw switchable to 9kw -Exhaust air connection 150 mm -Dimensions (Lxwxh): approx. 900 x 805 x 1390mm -Weight 147 kg
used
1 piece Sideros suction system type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatic, dust-duty filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,500 m3/h and a static pressing of max. 2,500 Pa. Filter class M with a separation degree of > 99.9% (BIA use category U,S,G,C). Technical data: volume flow fan 9,000 m3/h Volume flow Filter: 4,000 m3/h Press: 2. 500 PA filter area 60 m2 filter type: PTFE membrane separation degree: > 99.9% cleaning: rotary duesen connection power: 5.5 kW, 10.7 A voltage: 3 x 400 V, 50 Hz compressed air connection: 6.0 bar sound level: < 68 dB (A) dimensions: height: 2,100 mm Depth: 1,413 mm Width: 1,413 mm Weight: 62 ...
used
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...