connection used for sale

Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body: - with cooling jacket 843 mm - connections for cooling jacket on the back inlet 1/2, outlet 1/2  ...

GEA Tuchenhagen acid tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200

Rated power up to 2000 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1600 mm width 700 mm He 210 0 / 2350 mm Hoehe Acceptance 800 mm Weight 200 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside Connection for washing groves 2 outside High fruit delivery 1545 mm ; New machine - best condition

- Foerder speed infinitely variable rated power up to 1000 kg/h engine power 0.37 (0.5) kW (PS) Electrical connection 230V 50Hz (single-phase) Electrical fuse 16 A Laenge 2500 mm width 70 0 mm Hoehe 2100 mm He He Assumption 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside Connection for washing 1/2 outside High fruit delivery 1750 mm ; New machine - best condition

Wash wa whisk WA LC40 with raetzmuehle RM40 for packing press 100P2 rotary bend nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 70 0 mm Hoe he 2200 mm He Assumption 800 mm Weight 285 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inner connection for washing 2 outside He he mash release 1260 mm Maximum fruit release 800 mm Scope 12mm cutting sieve ; New machine - best condition

Wash waer WA LC40 with Raetzmuehle RM40 for belt press EBP420, EBP500, EBP580 rated power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 700 mm He 220 0 mm Height he acceptance 800 mm Weight 280 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside connection for washing 2 outside He mash release 1250 mm High fruit delivery 800 mm 9mm and 12mm snow ; New machine - best condition

Wash wa lund WA LC40 with raetzmuehle RM40 for packing press 180p2 Nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 700 mm Maximum 2400 mm Hoehe Assumption 800 mm Weight 290 kg material 1.4301 / AISI 304 Connection for cleaning 1/2 internal Connection for washing 2 unless He mash release 1460 mm Maximum fruit release 800 mm Scope 12mm Cutting sieve ; New machine - best condition

Wash waw LC40 with raetzmuehle RM40 for belt presses EBP500, EBP650 and EBP820 nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A 000 mm width 700 mm Hehe 2400 mm He he Assumption 800 mm Weight 285 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inner Connection for washingHeight mash release 1500 mm Height fruit delivery 800 mm 9mm and 12mm Cutting sieve ; New machine - best condition

Rated power 3000 up to 8000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3570 mm width 980 mm High sof 2570 mm 490 kg material 1.4301 / AISI 304 Connection for cleaning HD M22 x 1.5 or G 1/2 Ag connection for washing room 1/2 outside He he mash release 1460 - 1620 mm Height fruit delivery 1460 - 1620 mm ; New machine - best addition

Eurolux beer tanks / fermentation tanks made of V2A with cone bottom, Test pressure: 1.5 bar, operating pressure: 0.99 bar with cooling jacket - capacity: 1500 litres New Material: V2A (AISI 304) 1.4301 Topsoil: with manhole with 6 screws with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 valve Cylinder tank: Cooling jacket 1000 mm wide with connection 1" AG input and 1 1/4" AG output Underbody: can be underrun with lifting scales and forklifts with residual outlet with forward-drawn outlet pipe, tank flush threaded nozzle DN 50, according to DIN 11851 with cone floor 120 Dimensions and weight: DxH: 1150 x 2400 mm Zyl. Height: 1500 mm Weight: 165 kg On request with: (extra charge - price on request): Fermentation sprout connection DN 50 Tasting tap DN 15 Fermentation s ...

Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...

One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...

Bag-in-box filling - also with 6-digit row filler available nominal power l/h 750 (at 10l bags) l/h Electrical connection 230V 50Hz (single-phase) Electrical fuse 16 A Laenge 1030 mm Width 7 40 mm Height 1065 mm Weight 85 kg material 1.4301 / AISI 304 Filling accuracy of 0.5% compressed air connection 6 bar connection for juice supply 21.3 Juice storage capacity 58 l Supplied incl. cleaning adapter ; New machine - best condition

Electronic water dosing device with temperature display Your advantages: fast and exact input of the water quantity Clear control panel with large, bright display compact and flour dust-proof stainless steel housing easy connection to an ice water system with Automatic Wiedehol Technical data Dosing volume range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 ltr./min Water connection: 3/4" external thread Power connection: 100 - 240V ; 50hz Dimensions W x H x D: 200 x 300 x 130 mm Visit our Milbrandt Outlet with many bakery machines and appliances!

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

GEA Tuchenhagen lye tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200

Slanted elevator with Rätzmühle RM4 Technical data: Nominal output up to 3 000 kg/h Power: Slanted elevator 0.55 kW Mill 4/3.3 kW Circumcate pump 2.2 kW Electric connection 400V 50Hz (3 phases) Electrical protection 32 A Dimensions: Length 3 540 mm Width 935 mm Height 2 585 mm Discard or drop-in height 850 mm Weight 350 kg Material 1,4301/AISI 304 Connections: Connection for cleaning 1/2 "inside Connection for washing containers 2 "outside Height corn chee-ejection 1 570 mm Can be used for nuclear and stone fruits, berries, vegetables Delivery 7 mm, 9 mm and 12 mm cutting sieve

Machine type water circulation cooling unit Merkle brand Type WK 370 Plant No. 38.118 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 700 x 370 x 285 mm Weight 28 kg Age approx. 10 years Condition workshop tested very good Warranty 12 months from the date of delivery Original price 1.200,00 € + VAT Price 675,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our ...

Machine type water circulation cooling unit Merkle brand Type WK 230 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 610 x 230 x 215 mm Weight 18 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Machine type water circulation cooling unit Merkle brand Type WK 200 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 590 x 200 x 210 mm Weight 15 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 12.200 liter UNI-NIED Measurement and Weight: Total Height: 3400 mm Length: 2400 mm Width: 1850 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With connection for zapf clape With connection for sample valve Lower bottom: With flat bottom With outlet pipe pulled forward NW50

Complete printshop from one place in germany: Manufacturer: Ryobi 5 colors Model: 755 (S-5-A) Year: 03-2006 Equipment: aut. Print provision, pallet feeder, oscillating FA IVS equipment, Spectro Pro densitometer serial no. B201004, plate punch Beil, Connection for Foellmer counting tape inserter OK-90 Possibly. Number of prints: 38 million Availability: spring 2021 Price expectations: Defects: none, regular maintenance Manufacturer: Horizon Model: VAC-100A, SPF-200A HMU-100, ST-40, FC-200A, SC-200 Year: 04/2008 Equipment: Small format equipment MS-100, additional blower f. VAC-100, stacking lowering table, manual system HMU-100 Availability: spring 2021 Defects: none Manufacturer: Polar 92 Model: XT Year: 02-2007 Availability: spring 2021 Defects: none, regular maintenance Manufacturer: Horizon folding machine Model: AFC-504AKT Year: bought used 04 - 2009  ...

Styrofoam compressor Styropactor MINI | Polystyrene press for polystyrene EPS Polystyrene compressor. Combination of shredder and press for polystyrene, EPS MINI 1-phase Commodity number: 42030 Throughput with fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h. Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Boxes/ST Density (after compression): 175-225 kg/m³ Connection: 1.5kW, 1-phase, 230/110 V, 50-60 Hz Insertion opening: 400×780 mm Length: 2220 mm Height: 1600 mm Width: 630 mm MINI 1F-3 phase Commodity number: 42032 Throughput with fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h. Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Boxes/ST Density (after compression): 250-350 kg/m³ Connection: 2.2kW, 3-phase, 400 V / 50 H ...

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...

PA 21/3 High-performance brochure inserts for pre-folded brochures/package inserts Technical features: -Drive on the right -Solid construction -Low-noise drive - without gears -Modular system - Highest performance through the use of double curve, crank drive and electronically controlled stepper -Compulsory handover Sizes: -Inlet width max. 210 mm min. 60 mm -Inlet length max. 105 mm min. 15 mm Paper weight: -Recommended paper thickness 45 - 100 g/sqm Achievement: -Depending on paper quality and fold up to 400 rpm. Drive: -via chain Mass and weight at PA21/3: 1600 x 640 x 500 mm (length x width x height) Weight: 84 kg Compressed air connection for solenoid valve vacuum control 6 bar, vacuum connection: 0.6 bar, compressed air connection (Festo valve) for pneumat. Swivel actuator 6 bar The PA 21/3 are similar in principle to the PA 21/2, but hav ...

Extinguishing water tank Extinguishing water tank 100,000 litres steel tank, earth tank can be used as extinguishing water retaining tanks, Sports field irrigation, rain retention tanks, cisterns, etc. Factory new Dimensions: D = 2.90 m - L = approx. 16.00 m On request, the container can be fully equipped with a fire-fighting water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A, with Storz A-fixed coupling and Storz A-blind coupling, - 1 pc. vent pipe DN100 with stainless steel hood - V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Extinguishing water colle ...

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

- for processing hinge systems and connection fittings - Advantages of hole-row drilling in the system 32 - Machine stand with lift - Switching console - Foot pedal - Pneumatic connection (6 - 7 bar, air consumption per stroke 1.2 ltr.) - Blow-off gun incl. hose and T-connection - Drilling gearbox with 19 spindles - pneumatic holders - Press-in die present - Stop ruler - Table profiles - Wooden pad - Suction nozzles (diameter 80 mm) The machine is mounted on a mobile cabinet and can also be delivered with it. The machine is completely cleaned and has been checked for its function. (Changes and errors to technical data and prices reserved!)

Edge gluing machine Brandt Type: KTD 14 Built: 1996 Edge gluing machine with direct glue indication for gluing Edge materials on straight workpieces. Processing units: Install Glue indication Roller separation Flush milling Caps Workpiece thickness 10 - 40 mm Edge material thickness 0.4 - 1.2 mm Workpiece width min. approx. 50 mm Workpiece length min. approx. 260 mm Feed 6 m/min. Operating voltage 400 V+/- 10% - 3 Ph - 50 Hz Heating capacity 1.2 kW Connection value 3.04 kW Electrical connection cable length approx. 4.5 m Compressed air connection 7 bar Operating pressure 6 bar Weight: approx. 150 kg Space requirement: approx. 1800 x 1600 mm

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Floor oven Wiesheu EBO 5-128 Floor oven Wiesheu EBO 5-128 -with hood including fan -with base -5 herds each 120x80cm -each stove with stone slab -digital Wiesheu Comfort control -Upper and lower heat can be controlled separately -with fixed water connection for each floor seperat -Each floor with separate swath box for swaths -Each floor with exposed glass -Each floor with lighting -Built in 2014 -Connection per floor 9.9 kW -Total connection power 49.5 kW -400 Volt 3/N/PE 50 Hz -Oven is mobile on wheels -prud and cleaned The furnace is fully assembled Ready for loading in stock.

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Valve terminal, valve assembly, 50E-F14GDQSUXYKJNY…., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.680 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJ-D-UL1-EX1E, 32P-SGK-R-MASVAIIIU-7KL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 3 pieces of interlinki ...

Valve terminal, valve assembly, 50E-F14GDQSERYKJ-D-UL1-EX1E, Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.250 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 2 p ...

GreenLine SCH 230 - Mower container with flail mower GM 130. Universal device for mowing/mulching and for simultaneous reception of the mowing material. Heavy, robust design: mulcher with leaf mallet, mowing width approx. 130 cm, adjustable bottom roller, container approx. 3.5 m³, emptying, additional tailgate in the rear for transport of z.B. straw bales or tools. Tyres 10.0x75-15.3", 10 PLY. Ab. GG 2800 kg. Power requirement from 22kw/30 HP (manufacturer's specification), 1 hydraulic connection ew (tipper connection) required! Machine with age-related defects, but operational. Equipped with inerole brake, ABE (General operating permit for public road traffic), transmission with freewheel. 1 hydraulic connection ew required. Design-identical machine also available with 150 cm mower as well as one with 150 cm and 5 m³ container. Details and prices on request.

Vakumix continuous homogenizer in the design and mobile on rollers. For connection to existing containers Connection suction side: DN 100 Connection pressure side: DN 80 CW: 30 Suction device front side DN25 for sucking in liquids. NEW: Control, inverter, all seals incl. mechanical seal. The flow homogenizer is PLC controlled. Delivery time approx. 4 weeks.

Kallfass Universa 5050 Sprint, technical data: Welding frame dimensions: 500 x 500 mm Foil: Half tubular film, approx. 12 - 80 μm Foil roll outer diameter: max. 400 mm Film roll core diameter: approx. 76 mm Film roll width: max. 600 mm Working height: 850 - 915 mm Conveyor belt speed: infinitely variable Welding system: welding punch with wedge or profile shape continuous heating, temperature control and monitoring by PLC, specially coated, maintenance-free, completely odourless working Welding frame passage height: 110 mm as standard Power connection: 400 volt three-phase current, 50 Hz with protective earth Rated power: 3.5 kW Rated current: 5.1 A Control cabinet position: in working direction right Compressed air connection: 6 bar Compressed air consumption: 14 l/stroke Finish: Kallfass anthracite Kallfass Compact 650S, technical data: Tunnel passage width: ...

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

Gluing stand VHS with motor hydraulics for gluing all frame constructions with dowel connection – tine connection – 45° miter connection. The motor-hydraulic gluing stands VHS are available in the following sizes: Maximum grouting range 2,500 x 1,800 mm 2,500 x 2,100 mm 3,000 x 1,800 mm 3,000 x 2,100 mm 3,500 x 2,100 mm Three vertical press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each. Two horizontal press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each (optionally, the gluing stands can of course be supplied with more press cylinders). Drive power 0.75 to 1.25 kW.

Stud welding machine KÖCO KÖSTER & CO. Type 601 E Fabr. No. 5356 Year of construction approx. 1995 Maximum welding current 600 Amp. Welding power at 3% d.c. 600 Amp. Welding power at 100% ED 100 Amp. Bolt diameter 3-8 mm Maximum welding time 550 ms Mains connection 400 volts, 50 Hz, 16 Amp. Plug - Welding current adjustment infinitely- Welding time adjustment infinitely variable - Welding gun KÖKO K14 with stroke ignition with 2 meter connection cable- 2 pieces of ground cable with 5 meter connection cable - Welding gun equipped with bolt holder for 5 mm threaded bolt Space requirement L x W x H 850 x 300 x 350 mm Weight complete 52 kg good condition; used

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...