connection used for sale

NC machine table (X-axis) Travel speed: 0.1 - 30 m/min Travel range: 800mm Tip height: -K version .200 mm grindable workpiece ?: 10 - 250 mm Center width (max. workpiece length): 800 mm NC divider (A axis) possible divisions: 1-999 Accuracy: ?3 angular seconds Workpiece centering by centering tip: Version K MK3 Max. Speed: 80 min-1 NC grinding slide (Z-axis) Feed step: 0.001 mm Input fineness: 0.001 mm Travel speed: max. 2 m/min Travel: 335 mm NC shift axis (transverse movement of the grinding wheel Y-axis) Travel: ? 70 mm Travel speed: max. 1m/min Input fineness: 0.001 mm NC dressing device (B, U and W axis) Working area of the setter: 120 mm x 120 mm Numerically controlled axes: 3 Feed speeds: U-axis: 0-2500 mm/min W-axis: 0 - 2500 mm/min B-axis: 0 - 100 min-1 Step fineness: U-axis: 0.0005 mm W-axis: 0.0005 mm B-axis: 0.025? Grinding spindles (data are based on a maximum cutting speed  ...

NC machine table (X-axis) Travel speed: 0.1 - 30 m/min Travel range: 800mm Tip height: -K version .200 mm grindable workpiece ?: 10 - 250 mm Center width (max. workpiece length): 800 mm NC divider (A axis) possible divisions: 1-999 Accuracy: ?3 angular seconds Workpiece centering by centering tip: Version K MK3 Max. Speed: 80 min-1 NC grinding slide (Z-axis) Feed step: 0.001 mm Input fineness: 0.001 mm Travel speed: max. 2 m/min Travel: 335 mm NC shift axis (transverse movement of the grinding wheel Y-axis) Travel: ? 70 mm Travel speed: max. 1m/min Input fineness: 0.001 mm NC dressing device (B, U and W axis) Working area of the setter: 120 mm x 120 mm Numerically controlled axes: 3 Feed speeds: U-axis: 0-2500 mm/min W-axis: 0 - 2500 mm/min B-axis: 0 - 100 min-1 Step fineness: U-axis: 0.0005 mm W-axis: 0.0005 mm B-axis: 0.025? Grinding spindles (data are based on a maximum cutting speed  ...

Machine is not in working condition, and can be used for spare parts only. , Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump power: 1.7 kW Flow ra ...

30,000 litre extinguishing water tank according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPRENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, Rain retention tanks, cisterns, etc. - Factory new - Dimensions: D = 2.00 m - L = approx. 10.00 m - weight approx. 6.2 to. With welded dome shaft approx. 800mm high, as well as a walk-in cover, galvanized + tagwaterproof. For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection. Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line ...

Vertical Turning Machine Modified with SUPFINA superfinishing device as a polishing machine. Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump powe ...

New device incl.pre and combined filters The compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - Dimensions 1197 x 600 x 790mm - Suction capacity 1250m³ / hour -400v ph 50/60Hz with red 16A CE plug - Hose connection 125mm Ø - incl. option external start / stop ( with 24V DC via 2-wire cable on the back side ) to activate via micro switch - Warranty 12 months ( filter excluded ) Typical applications : Marking laser Engraving laser Cutting lasers Options: - Suction hose in the necessary length - Connection sleeves - Suction nozzles

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5  ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

The new DYNAJET surface cleaning system DFS 500 VAC: With 500 bar and integrated Extraction according to the Venturi principle, the DFS 500 VAC is the ideal tool for fast and efficient cleaning of large areas such as.B. industrial and hall floors, building Forecourts or courtyard entrances. The suction according to the Venturi principle, in which an additional jet of water creates a Negative pressure is generated, which tears the dirty water with it, makes an additional Wet vacuum cleaner with separately required power supply superfluous. Efficient and powerful: Hot water version up to 95° C. Connection for sewage hose on the integrated extraction system. Nozzle carrier for accommodating two high-performance nozzles Form D for maximum cleaning performance. Stepless adjustment between cleaning and extraction capacity Mobile and robust: Three steerable wheels for super s ...

DYNAJET 500me HELI - 400V/50Hz INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and smooth use - Oper ...

DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! World's first 1000 bar high-pressure cleaner without control cable and with dry-closing Pistol. The new DYNAJET Trolley 1000 me combines the greatest possible ergonomics and maximum strength for concentrated efficiency. This makes DYNAJETten even more environmentally friendly, more efficient and safer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal  ...

DYNAJET 800me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/trian ...

YNAJET 500me - 400V/50Hz Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and smooth u ...

Cold water high-pressure cleaner with 7.5 kW output - 270 bar pressure and 15 l/min. Including Hotbox 300bar Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protect ...

Cold water high-pressure cleaner with 4 kW output - 170 bar pressure and 14 l/min. Including hotbox up to 200 bar. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink p ...

Cold water high-pressure cleaner with 2.2 kW output - 150 bar pressure and 8 l/min. Including hotbox up to 200 bar. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): -  ...

Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

- Table size (W x D): 500 x 120 mm - with clamping jaw - Size stop plate (W x H): 520 x 265 mm - Stop plate can be moved left and right - Tilt of table and stop: 45° to the left or right - Depth of the sawing unit: 175 mm - automatic lubrication of the saw chain - Diameter suction connection: 600 mm - incl. chains: 2 x 6mm; 1 x 8 mm; 2 x 10 mm; 1 x 11 mm; 2 x 12 mm; 2 x 14 mm; 2 x 16 mm - incl. swords: 1 x 6|40x150; 2 x 12-14|40x150; 2 x 16|40x150 - Weight: approx. 350 kg Engine data: - Connection voltage: 380 V - Frequency: 50 Hz - Current: 3.5 A - Power: 1.5 KW - Speed: 2,880 rpm - Control voltage: 220 V Dimensions (H x W x D): 1,800 x 600 x 900 mm Transport dimensions (H x W x D): 1,900 x 800 x 1,200 mm (without stop plate) on EURO pallet Transport dimensions fully assembled (H x W x D): 1,900 x 1,400 x 1,200 mm on EURO pallet Weight: approx. 400 kg (i ...

Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

- CE certification - Complete, original wood Her machine documents and operating instructions - Weight: 720 kg (basic machine), approx. 860 kg (machine with aggregates) Assembly: • Control panel (1888) SK 180 • Fully automatic edge feeding (1903) - Edge thickness striped goods 0.3 - 8 mm - Edge thickness rolled goods 0.3 - 3 mm - max edge height 51 mm • Adhesive application station (1906 M) - with hot melt adhesive cartridge - via sword nozzle with electro-pneumatic control - Temperature selector - Heating time approx. 5 min - Temperature approx. 190 - 240 degrees Celsius - Workpiece thickness 6 - 45 mm • Printing Unit (1912) • Cross-cut unit (1918) • Combino milling unit (1942 M) - for flushing, chamfering and radius milling • Pull blade unit (1929) - Edge thickness max. 3mm • Sandbar unit (1940) • 2 x suction connections 70 mm each • Compre ...

Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Technical specifications: Maximum hourly output: 500 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/0,18 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions:: L x W x H: 1160 x 1090 x 1465 mm Weight: 460 kg

One belt press EW 1050 Capacity: 900 kg/h Technical specifications: Maximum hourly output: 900 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions:: L x W x H: 1160 x 1490 x 1465 mm Weight: 600 kg

One belt press press EBS 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 850 kg

One belt press EBK 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 790 kg

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

One belt press EB 804 Capacity: 1850 kg/h Technical specifications: Maximum hourly output: 1850 kg/h Belt width: 800 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1470x 1680 mm Weight: 1270 kg

Glass bead saw / miter saw for aluminum and PVC profiles Fabr. ELUMATEC type MGS 460Fabr. -No: 20441 built in 1994Saw blade diameter max .: 300 or 250 mmSaw blade speed: 3800 rpmSection range: sh. diagramCompressed air connection: 7 barAir consumption per cycle: 10 l / minPower: 1100 WPower connection: 380 V / 50 HzOutside dimensions approx: 600 x 600 x 1200 mmWeight approx. 60 kgWith- Roller conveyor- Spraying deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Copy milling machine for Alu Fabr. ELUMATEC type KF 187Machine -No: 20030 Year 1985with large milling areaMilling range: 240 x 420 mmStroke: 240 mmClamping range of profiles: 250 x 250 mmMilling speed: 12000 rpm.Air consumption p. Working stroke: 12/32 lDrive power: 740 wattsAir connection: 7 barPower connection: 380 V / 50 HzWeight approx: 260 kgExternal dimensions approx. 1000x1000x1400 mmWith- Spraying device- pneumatic tensioning device- large stencil and milling area- pneumatic copy pin movement and milling depth adjustment- turret depth stop for different cutting depthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20092, built in 1995Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length for wings: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7.0 barAir consumption per working cycle: 12/24 lDrive power: 740 WPower connection: 380 V ,, 50 HzDimensions L x W x H: 3090 x 860 x 1690 mmWeight approx .:370 kgWith- 4 collets- 3 hori. tensioners- 1 stop each on the right and left- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Model: KR16-06 Year: 2008 Operating Pressure: 150 mbar Design Pressure: 500 mbar Scope of supply: this is fitted to all landfill gas engines as a prefilter before the gas goes into the engine. It removes water and particulate. Kelburn KR16-06 Coalescer Filter Vessel comprising of one off 400mm diameter demister/filter vessel, polyester / borosilicate microglass coalescing filter cartridge, RF flanged inlet, RF flanged outlet, ¾” BSPT (F) tapped drain connection, ¾” BSPT (F) tapped and plugged vent connection. Coalescer Filter Vessel complete with automatic liquid float drainer, differential pressure gauge complete with stainless steel isolating valves, fittings and pipework, sight level gauges, flanged access cover and davit arm and flanged and blanked inspection cover, 1 Complete set of interconnecting pipe work from filter vessels and automatic liquid float draine ...

Metal cleaning plant make MAFAC Ernst Schwarz type P 100.50 DApparatus number 90056 804, year of construction 1990for cleaning production parts and toolsWorking space depth: 445/237 mmLength x width: 1000 x 500 mm:Capacity: 290 lExhaust air volume flow: 1000 m3 / hVolume flow pressure: approx. 4 l / min, 0.1 barCapacity: 200 kgPneumatic connection: 4 - 6 barElectric connection: 380 V, 50 HzDrive power: 0.9 kWWeight approx: 360 kgExternal dimensions L x W x H: 1300 x 1295 x 970 mmUse of chemical solvents with a flash point above 55 ° C(Stable in hazard class A III VbF) or lower explosion point VEP above 40 ° CAttention: This device is not explosion proofWith- Sheet steel interiorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if yo ...

Induction soldering machine FDF Fritz DusseldorfBuilt in 1990 consisting of:1.) Soldering table type LT No. 25-18080.90 built in 1990with 1 lifting station projection: 400 mmDistance table - soldering unit: 650 mmelec. Connection: 380 V, 63 AConnected load: 35 kVADimensions: 1600 x 1200 x 1900 mm2.) Stationary parallel resonant circuit inverter type PSU 30-10Fabr. -No: 65.18601-90Max. Power: 30 kWFrequency range: 8 - 10 kHZConnected load: 41 kVAelectrical connection: 380 VDimensions: 1100 x 1100 x 2200 mm3.) Refrigeration unit VICARB Germany, built in 1987Machine -No: D 1044Operating pressure: 10 barPower: 56 kWWeight approx .: 186 kgDimensions: 1200 x 1200 x 1030 mmTotal operating time so far: 7770 operating hoursequipped with:- adjustable heating time- adjustable heating cycles- adjustable pause timelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free  ...

Comb. Inverter welding machine make REHMANN type TC 164Machine -No: 39912669 TIG / MMA / CUT CE markingPower range for welding: 10 - 160 AED at 160 A: 60%ED at 130 A: 100%Power range when disconnecting: 10 - 40 AED at 40 A: 60%ED at 30 A: 100%Power connection: 220 V / 50 HzWith- Plasma burner and hose package- TIG torch and hose package- Ground cable- Welding protection screen- Gas hose connection with pressure gaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

VA stainless steel tank approx. 4000L with frame frame used Pressure tank filter tank suction air filter dust filter Tank height total approx. 2600 mm - of which approx. 700 mm funnel Tank diameter approx. 1600 mm Volume approx. 4000 litres Connection openings approx. 300 mm Connection flanges approx. 445 mm Flap on the side approx. 800 x 500 mm with lattice insert/dust grate in the inner bottom and top with bracket for dust filter very stable design Total L/W frame approx. 3100 x 2130 mm Total height approx. 3600 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Fully refurbished Probat UG22 with chaff cyclone. Main features: Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG - modulated burner - separate Siemens motors for every function (drum, exhaust fan, cooling tray arms, cooling fan), enables to roast and cool simultaneously - speed controlled motors on the exhaust fan and drum for maximum control over the roasting process - two digital thermocouples (bean temperature and exhaust temperature) - analog thermometer in the exhaust - new control cabinet with buttons for all the functions doubled by an 10inch touch screen display - Artisan and Cropster connection through RJ45 ethernet cable/socket - new stainless steel cover - new stainless steel cooling tray sheathing - new insulation of the drum - new  ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

Professional vacuum packaging machine with stainless chamber, industrial pump, additional deep chamber and digital panel, possibility to connect to gas floor model PM-VC-400-UIG Manufacturer: Rotek, Austria; Digital panel for 50 operations and more additional functions; Built-in vacuum pump 20m³/h; Gas connection outlet/may not be used/; 2 strips for simultaneous sealing of two bags; 13 cm wide to 40 cm long at sealing seam; Deep camera – up to 260 mm; Automatic lid opening after packaging; Easy-to-use machine, with a stainless chamber with a lower cabinet and wheels for movement; For smaller bags, you can pack several together; Suitable for bags with a length of 40 cm. Through the digital panel, 50 different programs can be saved - for vacuum, for sticking, cooling time Vacuuming starts immediately after closing the lid and then the panel should ...

Stock number: U2395-3 Used vertical stainless steel silos for powders with total volume about 6000 l. Tank has internal diameter 180 cm x length of straight side of wall 144 cm. Silos has conical bottom, equipped with vibrating discharge outlet driven by el vibrating motor and pneumatically operated valve. Diameter of discharge 200 mm. Silos had been mounted on cylindrical support. Feeding inlet via top located connection to pneumatic conveyer. Silos has side wall rectangular connection for dust filter with dimensions 570 mm x 490 mm. There is a inspection manway with bolted lid with diameter 500 mm. Last time used in food industry.

Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until the last minute 02/2022 Modern AE immunoassay technology Meet clinical requirements with acridinium ester (AE) technology, which ensures the necessary flexibility and sensitivity for new and innovative assays. Comprehensive diagnostic clarification of various clinical pictures thanks to a test menu with over 70 different assays. Simplified inventory management and lower costs by using the same ready-to-use reagents on all ADVIA Centaur analysis systems. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded during operation. Easier training and operation thanks to an intuitive, icon-based user interface. Fewer operator intervention because daily maintenance is low and the system does not need to be cleaned monthly or booted  ...