conical used for sale

- CC controller Siemens 840 D - Year of construction 2002 Specification - Tip width: 600 mm - Tip height: 180 mm grinding Ø: 355 mm Z-axis speed: 15 m/min - min. Z-axis speed: 0.01 m/min - Axis resolution Z-axis: 0.5 μm X-axis speed: 10 m/min - min. X-axis speed: 0.01 m/min - Axis resolution X-axis: 0.5 μm - Grinding wheel left side (Øa x w x Øi): 500 x 80 x 203 mm - Grinding wheel circumference speed: 45 m/s - Power external grinding spindle drive: 10 kW - Speed workpiece spindle: 0 - 1000 m/min - Conical bore workpiece headstock: MK5 - Conical bore tailstock grain tip: MK4 - Cylindricity adjustment: +10° / - 4° - Total connected load: 28 kW - Operating voltage: 3x 400 V / 50 Hz - Total weight of the machine: 5800 kg - Operating sound level: 70 dB(A) according to EN 31201

sheet width: 3000 mm plate thickness: 12 mm pre-bending: 10 mn number of rolls: 4 Walzen diameter of upper rolls: 320 mm roll diam. bottom roll: 250 mm speed: 1,5 - 5 m/min total power requirement: 20,0 kW weight of the machine ca.: 13,05 t dimensions of the machine ca.: 5,9 x 2,05 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 16 mm pre-bending: 13 mm upper roll diameter: 330 mm lower roll diameter: 300 mm side roll diameter: 240 mm total power requirement: 11 kW Overall size: 5600x1650x1900 mm weight of the machine ca.: 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: UG6347 Used stainless steel conical mill by Frewitt (CH) model TC-150. Machine is driven by el motor with power 4 kW. Mill works with adjustable rotation in range from 500 up to 3800 rpm. Reported output depends on product and mesh of screen and can reach from 250 up to 600 kg/h. Machine is equipped with conical sieves with mesh 0.5 mm, 0.7 mm and 1 mm. Includes technical documentation.

sheet width: 2050 mm plate thickness: 6,0 mm pre-bending: 4,0 mm diameter of upper rolls: 160 mm diameter of lower rolls: 140 mm total power requirement: 2,2 kW weight of the machine ca.: 3.000 kg dimensions of the machine ca.: 3500 x 1500 x 1300 mm New price ~ 48.000 euros from a repair workshop - good condition (!) Furnishing: - hydraulic 4-roller bending machine - with conical bending device Inclination of the bottom roller and the side rollers Alignment in parallelism in each side roller position Hardened stop roller Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direc ...

sheet width: 2050 mm plate thickness: 6,0 mm pre-bending: 4,0 mm diameter of upper rolls: 160 mm diameter of lower rolls: 140 mm total power requirement: 2,2 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 3,5 x 1,5 x 1,3 m New price ~ 45.000 euros from a maintenance workshop rarely used () Furnishing: - hydraulic 4-roller bending machine - with conical bending device Inclination of the bottom roller and the side rollers Alignment in parallelism in each side roller position Hardened stop roller Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - pivoting operation - Digital displays (2 pieces) for the side roller position - Adjustable contact pressure of the bottom roller with manometer - hardened rollers SAE 1050 CK 45 - Conical bending device - Hydraulic folding store for removing closed pipes - Direct drive ...

Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301, Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting , Code: 539

: neu : ca. 10 Wochen ab Auftrags : Türkei : 67700 € : 1354 € : 3100 mm : 10 mm : 10 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1460 mm : 1550 mm : 7500 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52100 € : 1042 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 3750 mm : 1180 mm : 1300 mm : 4000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad wa ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1074 € : 2550 mm : 8 mm : 8 mm : 6 mm : 220 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 4900 mm : 1100 mm : 1250 mm : 4600 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31400 € : 634.28 € : 1550 mm : 6 mm : 6 mm : 4 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 3750 mm : 880 mm : 1100 mm : 2400 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 707 € : 2050 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created w ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111100 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 117800 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 56100 € : 1122 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1425 mm : 1470 mm : 5450 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127000 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 64100 € : 1282 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1460 mm : 1550 mm : 6800 kg STANDARD EQUIPMENT fully hydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing hardened rolls 2 working speeds central lubrication system protectionagainst overload moveable control pane user manual in GERMAN and ENGLISH machine and equipment accordingto the CE regulations OPTIONAL EQUIPMENT ground and polished rolls infinitely adustable speed of rolls hydraulic/mechanic adjustable upper and lateral supports aut. material withdrawal changeable upper roll for especially narrow bending radii IMPORTANT ISSUES AT CONICAL B ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 62200 € : 1244 € : 3100 mm : 9 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1425 mm : 1470 mm : 6350 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

IWKA TZK100 automatic tube feeding system for conical shaped tubes, suitable for conical tubes with a diameter of 12 to 50 mm and a maximum tube length of 235 mm, rod length 730 to 850 mm, capacity from 40 to 100 tubes per minute,compressed air 6-8 bar, machine floor space approx. 2000 x 690 mm (LxW), machine height approx. 1570 mm, machine net weight approx. 570 kg

3-roll bending machine SCHÄFER type SRMVS Masch. Nr. Year of manufacture: 1973 , sheet length: 2000 mm, sheet thickness: 16 mm, top roll, diameter 250 mm, bottom roll, diameter 230 mm , roll speed 7 rpm. Rolling speed approx. 5 meters min. Mains connection 380 volts, 50 Hz. - all 3 rollers driven - symmetrical roller arrangement - motorized upper roller adjustment- conical bending via inclined adjustment of the upper roller with coupling for one-sided adjustment - lateral start-up for conical bending - motorized lower roller adjustment , individually for the front and rear roller- right and left rotation via control button in the control panel - swing-out hinged bearing and spindle support to relieve the upper roller Dimensions L x W x H 4200 x 1900 x 2200 mm Weight 10.6 ton. good condition; used

: neu : ca. 12 Wochen ab Auftrags : Türkei : 60500 € : 2050 mm : 16 mm : 16 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1460 mm : 1550 mm : 6000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59000 € : 2550 mm : 10 mm : 10 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1425 mm : 1470 mm : 5700 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created ...

Volume: 556 hl, Operating temperature: 20 °C, Width: 4250 mm, Height: 4940 mm, Weight: 3310 kg, Material: stainless steel, Position: vertical, Base construction: conical, Features: 1 conical cooling zone (2,2 m²), 2 jacket cooling zones (total 23 m²), manhole, outlet DN65, CIP-line with spray head, safety valve, manometer, vacuum valve, sampler, ladder, thermometer, sight glass, lighting fitting

Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP ball ...

Chuck flange, intermediate flange for lathe chuck PAGUS Outer Ø: 245 mm bolt circle (lathe chuck side): Ø 224.5 mm, 6 x M12 x 1.75 bore (lathe chuck side): Ø 104 / 106 x 10 mm (conical) bolt circle (machine side): Ø 171.5 mm, 6 x diameter: Ø 18 mm flange(machine side): Ø 201.5 x 0.75 mm bore (machine side): Ø 136 / 139 x 18 mm (conical) used, tested ! Dimensions: 245 x 245 x 28 mm

Chuck flange, intermediate flange for lathe chuck PAGUS outer Ø: 300 mm bolt circle (lathe chuck side): Ø 270 mm, 6x M16 x 2,0 bore (lathe chuck side): Ø 136 / 139 x 16 mm (conical) bolt circle (machine side): Ø 171.5 mm, 6x diameter: Ø 18 mm flange (machine side): Ø 225 x 1.5 mm bore (machine side): Ø 136 / 139 x 16 mm (conical) used, tested ! Dimensions: 300 x 300 x 32 mm

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).

: neu : ca. 12 Wochen ab Auftrags : Türkei : 49000 € : 994.7 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll leng ...

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...

Used Alfatek Complete Line for Wine 5000 BPH Manufacturer ALFATEK Year 2003 Speed b h 5000 Formats standard Bordolese light truncated cone Bordeaux heavy truncated cone Bordeaux magnum 1 5L Rotation direction Clockwise Accident prevention Yes Manuals available Yes Revisions Available No Operating status Function Bottled product Wine Number of Valves 24 Fill type Gravity Type of nozzle Fixed Isobaric valve No PLC type Not Existing Spare parts available No Description of the used bottling line Used Alfatek Complete Line for Wine 5000 BPH 1 KOMPASS rinser with 16 spouts 2 Alfateck filler monobloc composed of 24 taps 4 Arol capping heads flush There are 4 formats available standard Bordeaux light truncated conical Bordeaux bottle heavy truncated conical Bordeaux bottle magnums 1 5L 3 Newtec glue labeling machine with two stations 4 APE carton former with Nordson gluer 5 APE case packer 6 tap ...

Used EFC Bottling Line For Beer 2014 The line was built by the EFC in 2014 Speed in BPH depends on the format With 0 33L we reach almost 2000 bph foam permitting It utilizes gravity filling with a possibility of slight depression The labeling machine is an Enos Base mounted on the same conveyor belt with an inkjet printer just overhauled we also have 2 kits for making conical bottles 9 taps with the possibility of using depression 26 and 29 mm crown capper 7 bottle format changes 2 kits for labeling 0 33 and 0 50 conical FRIZZ type bottles Electro pneumatic inlet valves and ball valve for the total emptying of the bell 9 nozzles with level adjustment Used Efc Bottling Line For Beer 2014 this line is in very excellent conditions and ready immediately for sale [...for more information send your inquiry to the seller.] refno: LC340

General SKU305U613 LocationBarneveld MakeZeppelin No.32354 Year of construction2005 Pressure Working pressure0.045 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume80000 Ltr. Pressure0.045 Bar Vacuumcheck Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity80 m³ (80.000 Ltr.) SizesDia. 3000x16000 mm Diameter3000 mm Cylindrical height10.000 mm Conical height2000 mm Conical bottomcheck Dished topcheck ManholeDN600 InletDN100 Top connectionscheck Outlet with vibro bottomcheck OutletDia. 200 mm Max. temperaturemax. 50 ºC Information Mounted on ringcheck Floorspace3,0x3,0 m CEcheck Total height14,0 m Weight4100 kg Extra SpecificationsWith filter on the top Minerals & inorganicPlastic & polymersDyes & pigmentsOther chemicalStarchFine chemicalsCosmeticsSilosPowdered foodsZeppelinIndustries > Che ...

General SKU316S1049 LocationBarneveld MakeJ-Tec Typeunknown missing type plate Main Features MaterialStainless steel Volume1065 Ltr. Specified Features - Bag dump station MaterialStainless steel Bag dump stations Silodosing system Closedcheck Capacity± 1065 Ltr. Sizesdia. 800x1800 mm Diameter800 mm Cylindrical height1800 mm Conical height1000 mm Conical bottomcheck Flat topcheck With covercheck Inlet720x520 mm Outlet with valvecheck (rotating valve: 0,55 kW 230/400 Volt:) Outletdia. 240 mm Information Floorspace1,2x0,8 m Total height3,4 m Weight350 kgBag dump stationsJ-Tec Material HandlingDosing units > Bag dump stationsBrand > J-Tec Material Handling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

General SKU316S536 LocationBarneveld MakeJ-Tec Typeunknown missing type plate Main Features MaterialStainless steel Volume1065 Ltr. Specified Features - Bag dump station MaterialStainless steel Bag dump stations Silodosing system Closedcheck Capacity± 1065 Ltr. Sizesdia. 800x1800 mm Diameter800 mm Cylindrical height1800 mm Conical height1000 mm Conical bottomcheck Flat topcheck With covercheck Inlet720x520 mm Outlet with valvecheck (rotating valve: 0,55 kW 230/400 Volt:) Outletdia. 240 mm Information Floorspace1,2x0,8 m Total height3,4 m Weight350 kgBag dump stationsJ-Tec Material HandlingDosing units > Bag dump stationsBrand > J-Tec Material Handling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU316S1017 LocationBarneveld Makeunknown missing type plate Main Features MaterialStainless steel Volume1200 Ltr. Specified Features - Silo MaterialStainless steel Silocheck Closedcheck Capacity1200 Ltr. Sizesdia. 1280x1350 mm Conical height600 mm Conical bottomdia. 400 mm Dished topcheck Manholedia. 300/450 mm Inletdia. 200 mm Top connectionsdia. 95 mm Outletdia. 400 mm Information Total height1,5 m Weight250 kg Floorspace1,45x1,45 mSilos-Tanks > SilosBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0276 LocationBarneveld MakeRodenbach Apparatebau GmbH TypeFeeding Silo Year of construction2012 Pressure Working pressure0.32 Bar Main Features MaterialStainless steel Volume8504 Ltr. Pressure0.32 Bar Specified Features - Silo MaterialStainless steel Silocheck Closedcheck Capacity8504 Ltr. Sizesdia. 2000x3900mm Diameter2000mm Cylindrical height2000mm Conical height1900mm Conical bottomcheck Flat topcheck Manhole490x490mm Inletdia. 180mm Outletdia. 200mm Information Floorspace2,2x2,2 M CEcheck Total height4,1 M Weight800 Kg Extra Specificationsinspection hatch in the cone dia 220mm SilosRodenbachTanks > SilosBrand > Rodenbach What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...

General SKU259T426 LocationBarneveld MakeAzo TypeBehälter D-1200 No.449091 Year of construction2007 Main Features MaterialStainless steel Volume1200 Ltr. Specified Features - Silo MaterialStainless steel Silocheck Closedcheck Capacity1200 Ltr. Sizesdia. 1200x1500 mm Diameter1100 mm Cylindrical height800 mm Conical height700 mm Conical bottomcheck Manholedia. 500 mm Inletdia. 500 mm Top connectionsdia. 45 mm (2x), dia. 25 mm Outletdia. 96 mm (with dosing screw) Information Mounted on framecheck Total height1,5x1,2 m Weight400 kg Floorspace1,5x1,2 m Extra Specificationswith metering screw and filtersSilosAZOTanks > SilosBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKUR0317 LocationBarneveld MakeAZO GmbH & Co. KG TypeD800XD400X1300H No.1270733-04 Year of construction2015 Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity300 Ltr. Sizesdia. 800x1000mm Diameter800mm Cylindrical height390mm Conical height600mm Conical bottomcheck Flat topcheck Inletdia. 50mm Top connectionsdia. 50mm Outlet with valvecheck Outletdia. 400mm Information Mounted on framecheck Total height1,3 M Weight240 Kg Floorspace1,0x1,0 M Extra Specificationsoutlet is equipped with a manually operated butterfly valve DN400 SilosAZOTanks > SilosBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU261S241 LocationBarneveld MakeSpiromatic Year of constructionunknown manufacturer plate is missing Main Features MaterialStainless steel Volume2000 Ltr. Specified Features - Silo MaterialStainless steel Silocheck Closedcheck Capacityca. 2000 ltr Sizesdia. 1200x2000mm Diameter1200m Cylindrical height1200 Conical height800 Conical bottomcheck Flat topcheck Manhole400x300mm Inletca. 200mm Top connections(3x) ca. 200mm Outlet with vibro bottomcheck Outlet with valvebutterfly valve (pneumatic) Outlet300mm Information Mounted on framecheck Floorspace1,5x1,4 M Total height3,4 M Weight500 KgSilosSpiromaticTanks > SilosBrand > Spiromatic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

General SKUR0316 LocationBarneveld MakeAZO GmbH & Co. KG TypeD800XD400X1300H No.1100959 Year of construction2012 Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity300 Ltr. Sizesdia. 800x1000mm Diameter800mm Cylindrical height390mm Conical height600mm Conical bottomcheck Flat topcheck Inletdia. 50mm Top connectionsdia. 50mm Outlet with valvecheck Outletdia. 400mm Information Mounted on framecheck Total height1,3 M Weight240 Kg Floorspace1,0x1,0 M Extra Specificationsoutlet is equipped with a manually operated butterfly valve DN400 SilosAZOTanks > SilosBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...

General SKU259T429 LocationBarneveld MakeAzo TypeET-200 Year of construction2007 Main Features MaterialStainless steel Volume200 Ltr. Specified Features - Bag dump station MaterialStainless steel 1.4404 (316L) Bag dump stations Silocheck Closedcheck Capacity200 Ltr. Sizesdia. 800x700 mm Diameter800 mm Conical height700 mm Conical bottomcheck Manhole730x480 mm Inlet730x480 mm Top connectionsdia. 100 mm Outlet with vibro bottomcheck Outletdia. 47 mm Information Mounted on framecheck Total height1,5 m Weight400 kg Floorspace1,3x1,4 m Extra SpecificationsEmpty bag compacter, type D400 Vibration floor, type D800-320 cip Pneum. control box, type VB cip Symmetrical outlet cone with outlet flange NW 500 Exhaust spigot Bag dump stationsAZODosing units > Bag dump stationsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

Yeast vessel on wheels, with flat conical bottom, side as well as center outlet, side wall cooling zone and lid., Additional title: mobile, coolable vessel, Volume approx.: 20 hl, Material: stainless steel, Position: vertical, Features: wheels, flat conical bottom, lateral as well as central outlet, side wall cooling zone, lid

Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole., Additional title: coolable tank, Volume: 21798 l, Working pressure: 0 bar, Width: 2,9 m, Material: stainless steel, Position: vertical, Features: flat conical bottom, side wall and cone cooling zone, central outlet, manhole

Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole., Additional title: coolable tank, Volume: 21798 l, Working pressure: 0 bar, Width: 2,9 m, Material: stainless steel, Position: vertical, Features: flat conical bottom, side wall and cone cooling zone, central outlet, manhole

Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole., Additional title: coolable tank, Volume: 21797 l, Width: 2,9 m, Material: stainless steel, uninsulated, Position: vertical, Features: flat conical bottom, side wall and cone cooling zone, central outlet, manhole

WESTFALIA separator decanter centrifuge with electrical panel Description Decanters are a very efficient means to carry out solid-liquid extraction with a high content of solids. Before entering the decanter, the extraction product, previously ground, ground or ground, is intensively mixed with the extraction agent in a separate mixer. The inlet through which the suspension flows into the decanter is arranged axially relative to the rotating bowl. The solid wall vessel has a cylindrical section for efficient clarification of the liquid and a conical section for dewatering the solids. The spiral, which rotates with a slight difference in speed with respect to the container, conveys the solids (extraction residue) to the solids discharge at the conical end of the container. The extract is transported to the cylindrical end of the container where it is discharged through a pump. High dri ...

Description: Ventilated benchtop centrifuge Mega Star 600, brand VWR Condition: Excellent, Year of purchase: End 2018. Price Characteristics: Benchtop centrifuge ideal for a wide range of applications such as the research in the pharmaceutical and biotechnology industry and research university. Auto-Lock 3 rotor locking system: Rotor change without tools at the touch of a button; users can quickly change the rotors and easy access to the rotor chamber for cleaning. ClickSeal aerosol-tight bucket sealing system: user-friendly one-handed gloved opening/closing, no need for screw caps or complex clips. SMARTSpin technology optimises acceleration, residual braking and residual load imbalance for maximum safety, regular analysis and reproducible separations. The pulse function saves time for short analyses. Intuitive controls and a large, bright LED display make operation easy. and  ...

General SKU305U624 LocationBarneveld MakeStarick Fördertechnik GmbH TypeLS3 / BAV1200 No.1821.2694.01.05 Year of construction2005 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume3000 Ltr. Pressure1 Bar Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity3 m³ Diameter2000 mm Cylindrical height500 mm Conical height1310 Conical bottomcheck Dished topcheck ManholeDN300 InletDN200 Top connectionsDN600, DN500 Outlet with vibro bottomcheck 0,80 kW, 400Volt (EX) OutletDN200 Information Weightca. 500 kg CEcheck Total height4,42 m ATEX compatiblecheck Extra SpecificationsThis silo comes complete with dust filter and rotary valve. New arrivalsSilosStarick Fördertechnik GmbHNew arrivalsTanks > SilosBrand > Starick Fördertechnik GmbH What you can expect from Foeth: -- Machine is in working condit ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40500 € : 822.15 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length  ...