conical used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7000 € : 144.2 € : 1270 mm : 2.5 mm : 90 mm : 6 m/min : 1.1 kW : 1850 mm : 700 mm : 1200 mm : 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7200 € : 148.32 € : 1550 mm : 2 mm : 90 mm : 6 m/min : 1.5 kW : 2130 mm : 700 mm : 1200 mm : 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5300 € : 109.18 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 9660 : ca. 10 Wochen ab Auftrags : Türkei : 7800 € : 160.68 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll hardened rolls tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14000 € : 285.6 € : 1270 mm : 5 mm : 140 mm : 3,5 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 driven rolls conical bending 4 digital readouts Number of rolls: 3100 mm Roll capacity cold: 13 mm Roll dia upside: 340 mm Dia under roll - side rolls: 320 mm Power needed: 25 HP Weight: 16,6 ton

JOTES SOH-10 internal grinding machine was built in Poland. The SOH10 grinding machine is used in the finishing process to give the right shape and surface roughness to holes with a diameter from 10 to 100 mm and conical holes with a maximum apex angle of 30°. The high-performance spindle machines workpieces with a maximum diameter of 300 mm (with guard) or 450 mm (without guard). The total weight of the machine is 2900 kg. Technical parameters of the JOTES SOH-10 internal grinding machine - minimum hole diameter: 10 mm - maximum hole diameter: 100 mm - maximum hole length: 160 mm - maximum diameter of grinded workpiece (with guard): 300 mm - maximum diameter of grinded workpiece (without guard): 450 mm - spindle rotation speed: 70-700 rpm - manual spindle feed (1 wheel revolution): 2,5 mm - largest spindle turning angle: 15° - lateral manual feed of spindle (forward): 50 m ...

Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed

Plate bending roll Capacity 3000x75 mm MG model 4ROLL Hydraulic machine with double pre-pinch -plate width up to 3000 mm -plate rolling thickness 75 mm Prebend 55 mm Tightest bending dia ID 800 mm Rolls length 3100 mm Upper roll 680 mm Lower roll 620 mm hydraulic unit power 100 Hp Hardened surface of the 4 rolls Pre-pinching with adjustable load to perform best roundness on edges Driven rolls powered with gear units axial and hydro motors each Cone plates bending, hydraulic conical plate rolling Electric commands joysticks and position readout with 4 axis cnc Drop-end hydraulic front open to unload closed shells. Digital readout of the 4 bending rolls. Variable speed rolling control. Central support can be added to support large dia. Shell forming Side arm can be added to hold in place think plate sheet being formed Weight of the machine ...

Bending capacity: Plate width: 3000 mm Plate thickness 140 mm Thickness max 200 mm depending on plate width and yield strength Technical data: 3100 mm Surface useful length on rolls 940 mm size of Top roll 840 mm size of Lower rolls 210 mm max thickness opening between the rolls 400/50 Vac voltage - rewirable 480/60 220 Hp Power electric installed Configuration installed with the machine Hardened surface of the 3 rolls. Conical plate bending hydraulic attachment with hardened contrast pad. All the 3 rolls driven with axial gearbox and motor each roll independent Calibration system for the re-rolling of welded shells rounding unwanted flat spots. Console electric on wheels with centralized commands joysticks and digital readout. Opening front side hydraulic drop-end to unload closed shells. Variable speed working slow/fast. Emergency systems  ...

Wrap-around labeller for: Bottles Cans Jars Flacons Manufacturer: Newman, Model NV2 Inline used, good condition, from ongoing production. Suitable for cylindrical and slightly conical products. Easy format changeover. up to 80 products / min Dimensions: approx. 4500 x 1100 x 1600 mm Stainless steel DataSensor Weight approx. 500 kg Location: Near Stuttgart

bending length: 1540 mm sheet thickness: 1.5 mm steel Roller diameter: 80 mm Motorized rear roller lining with automatic switch-off Clockwise and counterclockwise rotation via foot switch 3 roller drive Safety cable pull switch Conical rounding possible

BTS 200 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 gt; 1,5 mm winding diameter: max 40 mm 18 gt; 445 pieces/min power: 1,5 kW length: 990 mm width: 1000 mm height: 1600 mm weight: 610 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

Working width: 2000 mm bending capacity: 72.0 mm Bend: 66.0 mm Number of driven rollers: 3 Diameter top roll: 500 mm Diameter lateral underrollers: 420 mm conical bending device by inclination of the two side rollers hydraulic folding bearings Motor power: 56 kW mobile control panel with digital display Net weight: approx. 28 tons

BX 400 spring coiling machine + AB2 decoiler cap wire diameter: 0,8 gt; 4 mm winding diameter: max 70 mm speed: 180 m/min (max 90 pieces/min) power: 6 kW length: 1400 mm width: 1350 mm height: 1900 mm weight: 2200 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

sheet width: 1600 mm plate thickness: 16,0 mm ST pre-bending: 13,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 0 mm diameter of lower rolls: 0 mm total power requirement: 0 kW weight of the machine ca.: 0 kg. dimensions of the machine ca.: 0 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solution ...

Sheet thickness: 14,00 mm Bending length: 2050 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: CNC DAVI TOUCH Motorised Top support 1200 kg Hardned rolls 48-62 HR Rockwell C Conical bending attachment Minimum rolling diameter 270 mm   Rolling width:                 2050mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending:  10mm Top Roll Ø:                    240mm Bottom Roll Ø:                 230mm Side roll Ø:                   180mm Number of rolls:               4 Rolling speed:                 6 Adjustiment  ...

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1550 kg range L-W-H: 3220 x 1200 x 900 mm Exhibition machine - unused (!) Special price on request List manufacturer price: 21.400 euros Machine with special equipment Furnishing: - Electrically driven top and bottom rollers - Top roller can be swung out, with folding bearing - Conical bending device - asymmetrical roller arrangement - self-braking main motor - separate control and operating panel - Profile inserts in the rollers - Safety line - User manual in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for the rear roller - 2x bending speeds The data for this ad was created with ModulMWS - the software sol ...

NUMBER 46 POSITIONS YEAR'S 90 FINAL BOBIN CONICAL 230MM

with Willa hydraulic clamping conical bending Capacity: 400 ton x 4300 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3800 mm Max stroke: 300 mm Max distance between table -- ram: 546 mm Depth of throat: 400 mm Locking speed: 90 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 37,5 kW Length: 4500 mm Depth: 2500 mm Height: 3858 mm Weight: 34 ton

with conical ruler Distance between centers: 2000 mm Swing over bed: 575 mm Swing over cross-slide: 350 mm Diametre of main spindle bore: 53 mm Power on main spindle: 7,5 kW Number of speeds: 40 > 2376 rpm

heavy duty lathe with 3 guides with conical ruler rapid movement of cross-slide one steady of 710 mm one steady of 420 mm 4 claw chuck dia 420 mm Distance between centers: 5100 mm Swing over bed: 1200 mm Swing over cross-slide: 880 mm Swing in gap: 1650 mm (400 mm long) Diametre of main spindle bore: 130 mm Number of speeds: 7 > 700 rpm Digital screen: Fagor 1 axis Weight: 13 ton Steady(s) (fixed): 2 steadies

Feeder opening: 760mm x 570mm; Funnel Contents: Throughput : Material and screen dependent; Rotor diameter: 240 mm ; Rotor length: 350 mm; Blades: 12 knives on the rotor + 2x knives on the side; Knife size: 30mm x 30mm; sieve blockage: 25mm; hydraulic moving floor: Yes; Suction nozzle: 160mm; Power consumption: 6 kW; Noise level: 90 dB (A); Dimensions: 1,250 mm x 900 mm x 1450mm (L x W x H); Weight: 600 kg; Engine kW 5.5 IE2 (High Efficiency); Hydraulic power kW 0.5; Total installed power kW 6. Dimensions: H 1.450 mm x 1.250 mm x 900 mm. Kg 600. loading opening: 760 mm x 570 mm; rotor: à ̃ 240 mm x 350 mm; working width: 350 mm. N 12x knives (central) + 2x knives (side); knife 30 mm x 30 mm with hollow side, screwed with conical screw for better fastening; N 1x grid supplied, sieve to choose between à ̃ 12mm and à ̃ 25 mm. With ABB inverter to control worker mo ...

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS., Mimu machine tools Italy, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 250, Wheel diameter: 510, C ...

3-roll hydraulic 3000x30 mm pre-pinch planetary MG model G3030 year 2021 -Plate width 3000 mm -Capacity thickness 30 mm -Pre-pinch 25 mm -width on the rolls 3100 mm -upper roll size 400 mm -lower rolls size 380 mm -Hardened rolls surface. -All driven 3rolls gear box motorized each synchronized rotation -Conical plate bending attachment , rolls tilting & contrast roller. -Operator console with directional joysticks and digital readouts -Front drop-end open hydraulic -Emergency and safety installation -User manuals and instruction books. -Electric power 25 HP on the hydraulic unit. -V400/50

Four roll plate bending machine 2000 x 5 mm • mechanical dual prepinch • Model MCA2016 DAVI • Plate width 2000 mm • Capacity thickness 5 mm • Pre-bend 4 mm • Mechanical side rolls driven on linear guideways • Top roll 160 mm - lower roll 150 mm • Hydraulic rotation 4 hp • Conical plate bending with side rollers tiltable • Drop end front open hydraulic • Console electric control

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel diam ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 44300 € : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 750 mm : 910x750 mm : rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm : 0.12 kW : 4 kW : 4020 mm : 1600 mm : 2450 mm : 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Stock # U2333-8 Used vertical stainless steel storage tank by Kates (PL) type 2Z1,6 with working volume 1600 l. Tank has internal dimensions: diameter 1280 mm x straight side of wall 1330 mm. Tank has slightly conical bottom with central outlet. Valve not included. Side walls and bottom are layered with stainless steel safety jacket (has inspection window). Top welded, has manway with bolted lid diameter 625 mm. Tank is mounted on three stainless steel legs with tension sensors and stainless steel supporting frame. Sensors are connected to scale panel which is in Ex design. Shipping dimensions (in horizontal position) L 240 cm x W 155 cm x H 170 cm x weight about 500 kg.

Features: 2 tanks for wort sterilization wach with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system

Sheet thickness: 14,00 mm Bending length: 300000 mm Number of rolls: 3   3 roll plate benderSTOLTING - SRAH MACH-ID 7648 Make: STOLTING Type: SRAH Year: 2000 Hardned and grounded rolls Conical bending attachment Digital read out positioning side rolls CE-Mark  Fully hydraulic opperated Central lubrication Rolling width:                 3000mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending:  8mm Top Roll Ø:                    300mm Side roll Ø:                   300mm Number of rolls:               3 Rolling speed:                 0 - 5 Adjustment side rolls:   ...

Tumbling riveting machine - radial spot riveting machine KUMAG Masch. No. 67/101 Year of construction 1967 Table size 330 x 280 mm Projection 215 mm Tool shank cone 8 - 10 mm Rivet shank diameter 1 - 10 mm Tool stroke 30 - 40 mm Operating air pressure 1 - 6 bar Rivet time adjustable 0.5 sec. - 3 h motor power 0.8 kW Mains connection 380 volts, 50 Hz - Conical tool shank for quick tool change - Rivet head on the column adjustable in height- Fine adjustment of the working stroke, max. 10 mm, with scale ring - Riveting force air pressure infinitely adjustable - Triggering via push-button table model Space requirement L x W x H 670 x 450 x 850 mm Weight 215 kg good condition; used

rotary table diameter: 1250 mm max. workpiece diameter: 1300 mm table load capacity - central/maximum: 1200 kg Control: Fanuc 0iF grinding height: 400 mm total power requirement: 40 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 5 x 3,5 x 2,4 m Transverse axis Z1 - left side. For external sanding Transverse travel 550 mm Transverse speed 0-3000 mm/min Vertical axis Y1 - left side. For external sanding Vertical travel 530 mm Vertical speed 0-2000 mm/min Motor spindle 1 - left side. For external sanding max. grinding wheel dimensions 400 x 80 mm Spindle motor power 15 kW Spindle speeds 1100-2200 rpm Spindle mount HSK 80 Transverse axis Y2 - Right side for surface and groove grinding Transverse travel 550 mm Grinding diameter 220-1300 mm Transverse speed 0-3000 mm/min Vertical axis Z2 - Right side for surface and groove grinding Vertical travel 4 ...

dimension of workpiece: 200 mm workpiece weight max.: 100 kg voltage: 230 V longitudinal feed: 150 mm vertical movement: 100 mm tool taper: bis 60 mm im Prisma Condition: new / unused: The machine can be viewed under current.: WMTR video measuring device T 210 Granite base plate 500 x 600 x 50 mm Digital size 0,001 mm resolution Longitudinal axis 150 mm Vertical axis 100 mm Tool holder in prism up to 80 mm diameter Swivel bracket 210 ° swiveling image comparison export of dates to EXCEL frequently measuring of video pictures labeling and marking of pictures saving and printing of pictures free calculation of variables detailed user administration superposition of DXF-drawings a lot of special software-modules Video measuring system IPM complete with: Software complete data acquisition create measurement protocols Consisting of: - Calculator, monitor, mouse, keyboard - ...

Used bread line W&P HATON -in bakery condition- - Dough divider, type: Parta U 2002 (YOC 2013) - Conical round knitter, type: CR-59 (1998) - Long scooter, type: Combi U (1998) -Cooking - Weight range: approx. 250 - 1,500 g - Capacity: approx. 1,000 pcs/h Inspection and test run are possible by arrangement.

Used stainless steel conical batch Nauta type mixer with 1000 LTR working capacity. Total capacity: 1830 LTR. Manufacturer: Pharming. Type: HV 1000 Mixer is designed for powder or semi-dry powder mixing with high efficiency. Agitator driven by 3 kW motor. Total hight: 3399mm 300 mm bottom discharge diameter.

Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast management, Number of tanks: 3 pieces, Capacity: 32 hl , Pressure: 2 bar test pressure 2,6 bar, Width: 1270 mm, Height: 3905 mm, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.

Capacity: 30 hl/tank, Features: 2 conical stainless steel tanks, insulated, with dosage pump

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...

Dental colloid mill Manafacture: Gronfa Type: DC Year of manufacture: unknown Grinding gap adjustment, conical grinding set with adjustable gap size Power 2,935 rpm, 18.5 kW

Max. bending length: 2040 mm Max. sheet thickness: 1.25 mm steel Clockwise and counterclockwise rotation via foot switch 3-roller drive Safety pull switch Conical rounds possible

Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Motorized rear roller infeed Safety kill switch Conical rounds possible

Specifications - three driven rollers, under-rollers can be controlled by motor - Bending and conical rolling - Side bracket or hinged bearing can be swung out - Hydr. Raising and lowering the upper roller - Lateral hydr. Support bearings - Hydr. height-adjustable support arm - Operation of a separate control panel with digital actual value display - max. working width 3100 mm - max. sheet thickness at 240 N/mm² 1.4 x roll diameter 5 mm - 3.0 x roller diameter 7 mm - Top roller diameter 220 mm - Bottom roller diameter 190 mm each - Extended roller ends for placing profile rollers - Drive 400 V / 5.5 kW - Working speed approx. 5.6 m/min - Working speed with bending approx. 0.5 m/min - Space requirement approx. W 5200 x H 4800 x D 2200 mm - Weight approx. 6000 kg

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, hydraulic multi-disc spring-loaded brake -Output shaft conical: Ø 45 - 40 mm -Input shaft bore: Ø3 2 mm -universally applicable -Number: 11x brakes available -Price per piece -Dimensions: 220/190 mm -Weight: 16kg/pcs

Plate cutter, composite stone cutter, stone pincers, plaster stone pincers -for effortlessly cutting slabs and composite stones to length through the translation of the eccentric lever -great stability with low weight -exact guidance of the cutting knife -pendulum suspended upper knife for cutting materials that have a conical cross-section (curbs) -Max. for 6 cam stones -Own weight: 10 kg

Hydraulic pump PARKER, PMD-CHEMNITZ 3349111716 shaft diameter: Ø 15 / 18 mm x 20 mm (conical) shaft thread: M12 x 1.5 Flange: 114 x 90 mm New ! Dimensions: 145 x 90 x 115 mm

Encoder, speed sensor HEIDENHAIN ERN 1381.001 - 2048 ( ERN1381.001-2048 ) 313 453 02 Shaft: Ø 9 / 10 x 10 mm ( conical ) Flange: Ø 58 mm with documents ! used, checked ! Dimensions: 68 x 58 x 58 mm

Servo motor CID Type: HSM 60 ( HSM60 ) Power: 60 W Voltage: 12 V DC Shaft diameter 1: Ø 7 / 8 mm, length: 16 mm, conical with thread: M5 x 0.8, length: 8 mm Flange diameter 1: Ø 60 / 102 mm, Bolt circle diameter: Ø 92 mm with 4x threaded hole: M4 x 0.7, depth: 10 mm shaft diameter 2: Ø 7 mm, length: 29 mm flange diameter 2: Ø 60 mm, bolt circle diameter: Ø 48 mm with 4x threaded hole: M4 x 0.7, depth: 10 mm used, tested ! Dimensions: 145 x 106 x 106 mm

Servo motor CID Type: HSM 150 ( HSM150 ) Power: 160 W Voltage: 24 V DC Shaft diameter 1: Ø 8,5 / 10 mm, length: 20 mm, conical with thread: M6 x 1.0, length: 8 mm flange diameter 1: Ø 118 / 142 mm, Bolt circle diameter: Ø 130 mm with 4x threaded hole: M5 x 0.8 shaft diameter 2: Ø 7 mm, length: 29 mm Flange diameter 2: Ø 70 mm, bolt circle diameter: Ø 48 mm with 4x threaded hole: M4 x 0.7, depth: 10 mm New ! Dimensions: 160 x 120 x 120 mm