conical mixer used for sale

Inclined bucket mixer Manufacturer FMW Type 115200/21H475.1 Capacity 50 litres Material: Stainless steel heated, double jacket

Stainless Steel Continuous Mixer Manufacturer : MWM Type: 400 V-K Content: 400 litres Technical specifications : Machines No. 650 Continuous Mixer with Inclined Bucket Mixing Tool and Chopper Dimensions: length 3.00 m, height 1.00 m + 1.10 frame, width 1.30 m Engine: Power 15 kW, 1,460 /94 rpm Mixing shaft 94 rpm

1000L mixing capacity two-axis

Rego PM20 Planetary Mixer 20 liter Bakery Confectionery - Stepless electronic speed control / speed control - Electric boiler height adjustment - With automatic switch-off / timer - Light for illuminating the boiler Accessories: - 1 kettle (20 liters) - 1 kneading arms - 1 flat beater - 1 whisk - All tools made of stainless steel

50,000 litre milk tank/ agitator tank made of V2A Cat No.: 25-0150EUBA Condition: Used Volume 50000 L Material V2A (AISI 304) 1.4301 Total height 7200 mm Diameter 3300 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Manufacturer: Holvrieka Built in 1972 Topsoil: Inclined cone base 2 crane eyes Level measurement sensor Ventilators Tank cylinder: Manhole 500 x 400 mm Agitator mixer - side with propeller Subsoil: Flat bottom with 2% slope Outlet bag DN 100 Sensor for level measurement

Meat mixer CFS Capacity: 1400 liters Dimenzije: 2600 x 1700 x 2300mm

Horizontal batch mixer with a gross volume of 6,800 l. (= usable filling: 1,700 l. to 5,100 l. max.). Including drive unit with 110 kW and motor frame. Centrifugal unit equipped with Becker blades, end wall equipped with sampling device, emptying pneumatically via long floor flap.

Continuous twin-shaft mixer with multi-plate clutch, suitable for vacuum operation. Mixing trough and double cylinder length: 1,500 mm + 500 mm, mixing trough width: 700 mm.

Batch tumbler mixer with parts in contact with the product in stainless steel (drum made of VA 1.4541), gross volume: 1,000 l., usable volume: 600 l. (max.). Filling and emptying via pneumatic flat slide valves from Jaudt. Including modern control with Siemens CPU, touch panel and frequency converter (created by Gabler in 2020); Drive via SEW gear motor (1.1 / 6.6 kW); Speed infinitely variable from 0 to 29 rpm. The scope of delivery also includes feet that enable a spout height of 1,900 mm.

Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.

Sigma mixer with a gross trough volume of 8 l., drive via Bauer gear motor with 1.1 kW, trough manually tiltable for emptying. Parts in contact with the product made of stainless steel. Very good condition.

Manufacturer: Marini Type : Asphalt Mixing Plant Year of Manufacture: 1991 Control system: Miprotek 3000 Mixer: 2t Hourly output: 160 t/h Parallel drum: no Drum: 9m x D2.5m Silos: 3 silos (370t) - 100/120/150 Bitumen tanks: 2 x 60t + 1 x 30t horizontal Filler silos: 1 x foreign filler 60t Fillers: 2 x own filler 60t + 30t Dust extraction: 600m², 41,000 Nm³; 90 kW Burner capacity: 14 MW Find more here - / Contact us at -

Used homogenizer made by Brogli + CIE Basel Switzerland, type: MH 500 B, capacity: 500 liters with heating jacket, frame mixer, teflon scrapers, dispersing mixer and comb homogenizer.

DEFROSTER-MIXER FOR VEGETABLES WITH ROTARY DRUM, MECALSA, TYPE: MC ESC TRL Technical description: Heating: Direct steam Voltage: 380/440V Frequency: 50/60 Hz

Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible.

Continuous ploughshare mixer, used Type : KM 600 DW Brand: Lödige Material : Areas in contact with the product in stainless steel Volume : 600 ltr. --> 2 x Knife Head

A Pemat pan mixer for concrete is available. Volume: 750l, max. filling weight: 1200kg, hardened concrete output per batch: 500l, grain size range: 0-65mm, mixing trough diameter: 1900mm, mixing trough height: 700mm, drive power: 30kW, weight: approx. 3000kg. On-site inspection is possible.

Horizontal single-shaft mixer for blending dry, moist and pasty products. - Specifications: agitator type: S-shaped mixing paddle | volume tank: 300 liters | processing volume: max. 210 liters per run | stirring speed: max. 24/min | stirring motor power: 5.5kW | discharge motor power: 1.1kW | machine dimensions approx.: L2160?W700?H1200mm | weight: 750kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Paste mixer Brand: MTI Type: P-10ADO Power: usable volume 11 litres, nominal volume 15 l Technical specifications : The paste mixer is suitable for mixing, homogenizing, dispersing and suspending low to high viscosity products, Externally heated up to 65 °C and vacuum-proof Heating cooling jacket 5 bar Product space 0.75

Industriemischer f?r trockene Pulver, feuchte oder past?se, klebrige Produkte. Mit dem Einwellen-Spiralmischer lassen sich die Produkte in wenigen Minuten zu einer gleichmigen Masse mischen.- Spezifikationen: R?hrwerkstyp: Einwellen-Spiralr?hrwerk | Kapazit?t: max. 120 Liter | maximale Drehzahl der Maschine im Leerlauf: 53r/min | Maschinenabmessungen: L2030xB630xH980mm | Gewicht: 450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Pflugscharmischer, Fabr. Loedige, type: FKM 1200 D. 2 MZ, capacity 1200 ltr., usable capacity approx. 900 ltr., product contact stainless steel, double jacket for heating or cooling, max. 6 bar, 2 pcs cutter heads, mixer drive 22 kw., cutter head drive: 4 kw. each, 400 V. complete with control cabinet, frequency converter available, filling funnel available

Industrial mixing machine for blending dry, moist or pasty products, specifically designed for products with large net weight. The horizontal single shaft with the double ribbon mixers is blending the materials into high uniformity in a few minutes. ? Specifications: agitator type: single-shaft double ribbon agitator | capacity: max. 9000 liters | max. speed of the machine in neutral: 20 rpm | power: 90kW | machine dimensions: L6500xW2100xH2800mm | weight: 9800kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviati ...

3-D mixer for fast mixing of powdery materials. The innovative three-dimensional mixing principle of oscillating, parallel and rolling motion generates a strong impulse movement to cause a continuous forward pushing of the materials. With an excellent mixing effect in the result, the technology also allows short mixing times and so a higher output compared to conventional mixers. - Specifications: Tank volume: 300 liters | processing volume: max. 240 liters per batch | max. processing weight: 150kg | power 4kW | machine dimensions approx.: L1800?W1950?H1700mm | weight: 1000kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations fro ...

Horizontal single-shaft mixer for dry, moist and pasty products. - Specifications: S-shaped mixing paddle | volume tank: 200 liters | processing volume: max. 140 liters per run | stirring speed: max. 24/min | stirring motor power: 4kW | discharge motor power: 0.75kW | machine dimensions approx.: L1850xW600xH1000mm | weight: 720kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Mixer Manufacturer : AVA Huep GmbH & Co. KG Type: HTL 3 Power: 1.1 kW Content: 4 liters gross volume Technical specifications : Stainless steel mixers for powdery to paste-like products Dimensions Speed 15-400 rpm, rated speed 128 rpm Frequency-controlled Width approx. 512 mm Height approx. 701 mm without table Length approx. 1076 kg Weight approx. 200 kg Documents: available

Stock number: R1208, In-line mixer, stainless steel,, Ystral type Z 66-2400 SL., Double jacket with circulation pump and, tube radiator for product., 2 speeds, 2,0/2,4 kW motor, 380 V., Material: Stainless steel AISI 304, In stock: Yes

Stock number: R1232, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: 2-shafts mixer, Lying: 4 pcs. legs, Top: Open, with bolted safety grid, Paddle size: 2 x D 250 mm., Shaft lenght: L 2700 mm., Shaft diameter: D 75 mm., U-profile: Yes, Motor: 1,1 kW - 230/400 Volt - 15 rpm., Dimensions inlet: 420 x 430 mm., Dimensions outlet: 250 450 mm., Dimensions mixer: L 2500 x B 440 x H 860 mm., Dimensions total: L 3480 x B 680 x H 1160 mm., Manufacturer: BEMA, Model: 2 x Ø 250, Year: 2007

0,3 litre, Stock number: R1194, Litre: 0,3, Material: Stainless steel AISI 304, In stock: Yes, Item: Mixer, Amount in stock: 1 pc., Standing: On a foot, Agitator: Yes, Agitator type: 2 pcs. mixing screw, Motor: 0,55 kW - 220/380 Volt - 950-165 rpm., Heated: Yes, electricity heated, Other: Coated mixing chamber, prepared for vacuum and excl. steering

Stock number: R651, In line mixer, stainless steel,, Ystral, type Z 7.500 SL., 7,5 kW motor 1450 rpm. 380 V., Cuno filter., Ø 320 x 600 mm., Mechanical., Material: Stainless steel AISI 304

1.000 litre, Stock number: R1229, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Item: Ribbon mixer, Amount in stock: 1 pc., Standing: 4 pcs. legs, Agitator placement: Horizontally, Agitator type: Frame agitator, Motor: 0,55 kW - 220/380 Volt - 70.82 rpm., Inner diameter: Ø 900 mm., Dimensions: Vessel L 1400 x W 900 x H 900 mm., Total height: 1650 mm., Other: Bommergate outlet in the bottom

2.400 litre, Stock number: R293, Drum mixer, stainless steel,, type DDMM., Double cone with tank cover in the side., Hinged in gear console and bar., Variable speed., Litre: 2.400, Material: Stainless steel AISI 304

2.700 litre, Stock number: R1215, Litre: 2.700, Material: Stainless steel AISI 304, In stock: Yes, Item: Ribbon mixer, Amount in stock: 1 pc., Standing: 4 pcs. legs, Motor: 11 kW - 380 Volt, Cover: On the top, Dimensions mixing chamber: L 2500 x W 1000 x H 1200 mm., Manufacturer: VEBE, Other: Sliding draught in the bottom

25 litre, Stock number: R1206, Cube mixer, stainless steel,, Erweka type KB 30 S., 0,18 kW motor, 21 rpm,, 220/380 V., For powder, granulate etc., Litre: 25, Material: Stainless steel AISI 304

1 litre, Stock number: R1173, Litre: 1, Material: Stainless steel AISI 304, In stock: Yes, Item: Mixer, Amount in stock: 1 pc., Standing: In a cabinet, Double jacket: Yes, Agitator: 2 pcs., Agitator placement 1: Mixing agitator in the bottom, with variable speed, Agitator placement 2: Blend agitator in the side, with variable speed, Cover: In the top, Inner diameter: Ø 90 mm., Outer diameter: D 140 mm., Dimensions: L 700 x B 650 x H 2000 mm., Manufacturer: UTV, Type: Novamix 1 l, Year: 1993

1 litre, Stock number: R1172, Litre: 1, Material: Stainless steel AISI 304, In stock: Yes, Item: Mixer, Amount in stock: 1 pc., Standing: In a cabinet, Double jacket: Yes, Agitator : 2 pcs., Agitator placement 1: Mixing agitator in the bottom, with variable speed, Agitator placement 2: Blend agitator in the side, with variable speed, Cover: In the top, Inner diameter: Ø 90 mm., Outer diameter: D 140 mm., Dimensions: L 650 x W 500 x H 1600 mm., Manufacturer: Baker Perkins, Type: Novamix

250 litre, Stock number: R1226, Litre: 250, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Mixer, Amount in stock: 1 pc., Standing: On legs, Top: With bridge and lid, Bottom: Dished, Double jacket: Yes, electrically heated, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Frame agitator with scrape in the top, Agitator type 2: Homogenizing agitator in bottom, D 125 mm., Working pressure double jacket: 60 PSIG, Inner diameter: Ø 760 mm., Outer diameter: D 980 mm., Total height: 2000 mm., Manufacturer: Surmet, Year: 1980

215 litre, Stock number: R1203, Litre: 215, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Agitator type: Anchor agitator with scrape and with homogenizing agitator in the bottom, Double jacket: Yes, Insulated: Yes, Outer cladding: Stainless fully welded, Manufacturer: Becomix, Model/type: RW 125, Year: 1990, Other: Without control panel

125 litre, Stock number: R1167, Rapid mixer, stainless steel,, closed top, standing on foot console., Hinged lid in the top,, draught outlet in the bottom., Start/stop function,, capacity: 40-80 litre., Ø 815 mm., Litre: 125, Material: Stainless steel AISI 304

500 litre, Stock number: R989, Rapid mixer, stainless steel,, standing on foot console for floor build in., Hydraulic raise/lower function,, hinged lid in the top., Sliding draught outlet in the bottom,, timer function and safety cut off., Ø 1200 mm., Litre: 500, Material: Stainless steel AISI 304

11 litre, Stock number: R1108, Drum mixer, stainless steel., Spicer., Standing on stainless foot, tablemodel., Stainless drum with cover in end bottom., Timer function., Litre: 11, Material: Stainless steel AISI 304

4.000 litre, Stock number: R970, Nauta mixer, stainless steel,, closed top, standing on 3 leg consoles., Double jacket., Dished top with inspection hole,, conical bottom., Sliding draught outlet in the bottom,, inspection cover in the bottom., Ø 2550 mm., Litre: 4.000, Material: Stainless steel AISI 304

50 litre, Stock number: R1152, Drum mixer, stainless steel,, SPICER type 50., Standing in stainless cabinet on wheels., Stainless drum with cover in the bottom end., Safety shielding., Timer function., Litre: 50, Material: Stainless steel AISI 304

3.600 litre, Stock number: R1086, Drum mixer, stainless steel,, Kolding type 4 GÆf., Hanging in gear box and beam., Tank cover in the side, outlet in the bottom, Ø 2400 mm., Litre: 3.600, Material: Stainless steel AISI 304

125 litre, Stock number: R1053, Rapid mixer, stainless steel,, closed top, standing on console., Hinged lid in the top,, sliding draught outlet in the bottom., Timer function and safety cut off., Capacity: 40-80 litre., Ø 815 mm., Litre: 125, Material: Stainless steel AISI 304

125 litre, Stock number: R1129, Rapid mixer, stainless steel,, closed top, standing on foot console., Hinged lid in the top,, sliding draught outlet in the bottom., Timer function and safety cut off,, Capacity: 40-80 litre., Ø 815 mm., Litre: 125, Material: Stainless steel AISI 304

125 litre, Stock number: R1052, Rapid mixer, stainless steel,, closed top, standing on foot console., Hinged lid in the top,, sliding draught outlet in the bottom., Timer function and safety cut off,, Capacity: 40-80 litre., Ø 815 mm., Litre: 125, Material: Stainless steel AISI 304

125 litre, Stock number: R1046, Rapid mixer, stainless steel,, closed top, standing on foot console., Hinged lid in the top,, sliding draught outlet in the bottom., Timer function and safety cut off,, Capacity: 40-80 litre., Ø 815 mm., Litre: 125, Material: Stainless steel AISI 304

45 litre, Stock number: R498, Planet mixer, stainless steel,, Maren type F45., 4 gears., Timer function., Accessories:, -2 pots, -1 dough hook, -1 whisk, -1 spatula, Litre: 45, Material: Stainless steel AISI 304

27 litre, Stock number: R544, Planet mixer, stainless steel,, Bjørn type R27., Variable speed., Removable vat, Ø 340 mm., With mixing tools., Litre: 27, Material: Stainless steel AISI 304

40 litre, Stock number: R566, Planet mixer, stainless steel,, Blomqvist type SV 40/20., Several speed., Ø 420 mm vessel., Litre: 40, Material: Stainless steel AISI 304