We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,307 used machines on RESALE, but how to find them? Machine Search
used
Switch cabinet - cooling device, switch cabinet air conditioner, distribution cabinet, heat exchanger spindle cooler -Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2 -Type: HPW-10AR -Voltage: 110V 50/60Hz -Dimensions: 250/75/H580 mm -Weight: 5.7 kg
used
Air conditioner, air conditioning, condensate pump for air conditioning, defrost water pump, tank pump -Manufacturer: Aspen, condensate pump HI-FLOW Tank Pump unused original packaging -Type: 2 liters / 288 l/h -Dimensions cardboard: 150/250/H180 mm -Weight: 2 kg
used
MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...
used
- Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet. Due to temperature control of the oil, it can also be used in intermittent operation. Equipment DUO KK with refrigerant dryer and fine filter as pre-filter upstream of the refrigeration dryer Condensate conditioner for oil-water separation automatic condensate traps. ---------- Technical Data ---------- Container size: 2 x 100 litres, Effective delivery quantity approx. 380 litres, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg new exhibition machine
used
Air conditioner, air conditioning, condensate pump for air conditioning, defrost water pump -Air conditioners -Manufacturer: Eckerle -Type: EE2000 -Number: 4x pumps available -Price per piece -Dimensions: 150/190/H80 mm -Weight: 0.5kg
used
Air conditioner, air conditioning, condensate pump for air conditioning -Air conditioning -Manufacturer: Siccon -Type: Flowatch Design -Dimensions: 935/135/H75 mm -Weight: 1.3 kg
used
Apec G30/20 5 axis bridge machining center Simultaneous Travel: Feed rate: X axis travel 2000 mm X/Y/Z axis rapid traverse 60/60/40 m/min Y axis travel 3000 mm X/Y/Z axis acceleration 0.5G Z axis travel 1000 mm Cutting feed rate 1-20,000mm/min spindle nose to table surface 330-1330 mm Table: Spindle: (APEC MONO SUPPORTING HEAD) Table size 2,000x3,000 mm Spindle taper HSK 63A Table load 8000 kgs/m2 Spindle speed 24000RPM T-slot size 28 mm Spindle motor (S1) 25/30 KW ATC: Spindle torque (S1) 119/143 NM Capacity 20 pc 2 axis head A-Axis C-Axis Tool shank HSK 63A Rotation speed 30 rpm 30 rpm Max. tool weight 15 kgs Max. torque 760 Nm 800 Nm Max. tool dia. (w. adjacent tool) 150 mm Clamping torque 4000 Nm 4000 Nm Max. tool dia. (w/o adjacent tool) 180 mm Rotation angle ± 125â ±360â Max. tool length 300mm Others: Machine Weight 39000kgs (around) Mo ...
used
We sell our until recently used pellet press, incl. control cabinet, drive press 2 x 22 kW, incl. conditioner and dosing unit frequency-controlled, incl. second set of roller wheels and various dies from Ø 4-8mm, built-in dies: 4x40 for animal feed; approx. 3500 kg/h feed - possible depending on input material
used
Sprout Matador Feed expander. Comes with 250kw motor and feeding conditioner.
used
PTN Pro 900x228. Complete with conditioner and 250kw motor Hydrulic rolls adjustment
used
Complete kitchen/restaurant/gastronomy/catering/canteen equipment The set includes: 2 Viessmann chambers with dimensions 3600 x 2700 x 2450 mm 4200 x 1800 x 2450 mm (divided into 2 chambers, one of which can work as a freezer and the other as a cold store) Work tables with dimensions: 300 x 70 x 90 cm 200 x 90 x 85 cm 200 x 90 x 90 cm 120 x 70 x 85 cm 300 x 80 x 85 cm 120 x 75 x 90 cm 300 x 80 x 80 cm Sinks with dimensions: 120 x 70 x 90 cm with two sinks 50 x 50 cm 120 x 60 x 85 cm with one sink 40 x 40 cm 190 x 80 x 90 cm with one sink 50 x 40 cm 110 x 58 x 85 cm with one sink with a diameter of 25 cm Lockable cabinet with shelves dimensions: 60 x 55 x 240 cm Dishwasher dimensions 70 x 70 x 200 cm Stoves/ovens with dimensions ELOMA ELH6-1 90 x 80 x 75 cm PAULUX GXA 6-11 90 x 80 x 85 cm ENDERS 42 x 48 x 30 cm 2 pieces Induction cookers EKU C-I-7 ...
used
Dear Ladies and Gentlemen, we would like to sell our forklift truck for a new investment. If you are interested, we kindly ask you to send us an offer for the following used forklift: Fully functional Forklifts with forks Manufacturer: Linde Type: H30D-02 evo Year of construction: 2013 Operating hours (as of 18.12.2023): 3,109.4 Heating – air conditioner 12V Regular maintenance of Linde until 10/2022 Pictures in the attachment Your offer can also be non-binding, subject to an on-site viewing. We look forward to a good cooperation and thank you in advance for your answer and efforts.
used
Complete pellet line for biomass or animal feed. CPM 3020-4 with 132 kW motor Including CPM Conditioner, CPM press and Geeelen cooler with fan and cyclone. Positive direct gear drive 132 kW, provides a 98% energy transfer Rounded cast gear case with internal ribbing for quieter operation Segmented die clamps for quicker die changes Metal-to-metal seals between components Modular gearbox design for production flexibility Replaceable quill flange Stainless steel pellet chamber Single motor 132 kW for greater efficiency Very good condition.
used
Control cabinet - cooling device, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling device, control cabinet cooler -Manufacturer: Siemens, heat exchanger control cabinet cooling device from milling machine MAHO MH 800C -Type: 8ME 7874-DR -Voltage: 230V -Power consumption: 170W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg
used
Modular labeling machine 14 heads cold glue adhesive 8000 14 000 BPH This New modular labeling machine can be customized as needed Suitable for applying labels COLD GLUE AND ADHESIVES GLUE collar GLUE back U or L seal ADHESIVE front ADHESIVE back Bottles Containers CYLINDRICAL and SHAPED No labeling stations No 3 COLD GLUE groups N 2 adhesive groups 60 meters ON THE MODULAR TRAY Head diameter 960 mm Plates number 14 Min max label length 10 150 Min max label height 15 200 Container diameter height min max 30 80 mm Height 100 400 mm Max required speed 8 000 bph Basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5 Light column indicat ...
used
5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED
used
Key data: 600 mm, 450 mm
CNC surface grinding machine Geibel&Hotz FS640 Z-CB Year of construction 2021 Specifications: Sanding surface (in mm): 600 x 450 Sanding area (in mm): 600 x 400 x 375 Table load max.: 600 kg Grinding spindle motor: 3.7 kW Grinding wheel, standard (in mm): 300 x 50 x 76.2 Fork funnel with 2 shaped diamonds Folding dresser Universal paper filter machine UPF 140 / 20 Cleaning pump Compact air purification device 2nd LED machine light at the top right 6 x Grinding wheel holder flat cone Pre-installation of mobile balancing device Mobile Balancer Grinding spindle motor 7 / kW Control cabinet air conditioner Oil filling The machine has a toothed belt drive in the longitudinal axis Price net free loading from location.
used
Nova rotary conditioner R16 year 2017 very good condition fully faired equipped with tray for pots diam 95 pot unstacking function, dosing filling by piston, heat sealing possibility of filling buckets on the machine table CIP cleaning planned on schedule - machine dimensions: 940x1375x1807 (excl. tot 2246 with pot unstacker) - capacity/h: 1000 pots/h 500g pots - possible volumes 100g 125g 250g 400g 500g diameter 95 + buckets 5l 10l… - weight 500 kg - motor power: installed power 1.5KW power supply 400V3P+N+T 50Hz head disconnector: 12A minimum pressure: 6 bars max pressure: 7 bars average consumption: 14Nm3/h at 6 bars - very good condition machine from 2017 price excl. tax €59,000 - operation around 6 hours/week or around 1700 hours in total sin ...
new
: 5,5 kW : 10 bar : - l : 850 l/min : 680 l/min container volume: 270 l : 400 V : 1200 x 800 x 1970 mm : 204 kg Stationary piston compressor with refrigeration dryer, fine filter, Condensate conditioner for oil-water separation and automatic condensate drain The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...
used
Description: Compressor  , Manufacturer Mark, year of manufacture 2018,operating pressure 7 bar, maximum pressure 13 bar, 3 kW, 50 Hertz, Maintenance on 22.2.2024 at 290247 operating hours,  ,filter + oil replaced , Boiler , Manufacturer Maschinen und Behälterbau GmbH, type MB 030603 - 2,500, volume 500 l, year of construction 2012 Dryer TypeMDX 6500 ( E9 ), year of construction 2022, ,weight 82 kg, ,230 Volt, 50 Hertz, 1.54 kW, operating pressure 14 bar, maximum pressure 14 bar Condensate conditioner BEKO Öwamat 2, last maintenance on 22.02 2024 Activated carbon replaced , Approx. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 1,500 mm, weight approx.: 400 kg
used
Description: Composed of: HITACHI RAC-25SXB thermo convector HITACHI air conditioner Remote control Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 50 kg
used
Description: • 4x2 refrigerated truck • Spanish registration number: 4407 GWD • Frame number ZCFA1EG1302523303 • IVECO D-E4AE3681BR diesel engine: 6 cylinders, displacement 5880 cc, power 160 KW • Manual transmission, gearbox 8 gears • Maximum total weight 12000 kg, death weight 6660 kg • Rear twin tyres • Drivers cabin with 3 seats, air conditioner, radio BLAUPUNKT, electrical window lifters • DIGAL refrigerated box, total box dimensions 5100 x 2320 x 2200 mm, CARRIER SUPRA 450 cooling unit, the contents in the box are included • ZEPRO SZD 100-132 L tail lift truck, maximum load 1000 kg, year of manufacture 2002 • New batteries, replaced in December 2023 • DEFECTS: impacts on the windshield • Emissions level: Euro 4 • ATP FRC, expired • Mileage 727908 km according to the counter • This vehicle is delivered with only one set of keys • Ownership change co ...
used
Description: • 4x2 refrigerated truck • Spanish registration number: 8356 GPG • Frame number VF644AHL000004020 • RENAULT D-DXI 7 280EC06 diesel engine: 6 cylinders, displacement 7146 cc, power 206 KW • Manual transmission, gearbox 8 gears • Maximum total weight 16000 kg, death weight 7940 kg • Rear twin tyres • Drivers cabin with 3 seats, air conditioner, radio CD, electrical window lifters • DAFER refrigerated box, total box dimensions 5600 x 2600 x 2600 mm, THERMO KING TS-300 cooling unit, the contents in the box are included • ZEPRO ZD 150-175 ML tail lift truck, maximum load 1500 kg, year of manufacture 2008 • RINGFEDER trailer hitch device • New batteries, replaced in December 2023 • Emissions level: Euro 4-C • ATP FRC certificate valid until 08-2024 • Mileage 1166695 km according to the counter • This vehicle is delivered with only one set of keys ...
used
Description: • 4x2 refrigerated truck • Spanish registration number: 5108 LXW • Frame number VF644AGD000002761 • RENAULT DXi 215-EUV diesel engine: 4 cylinders, displacement 4764 cc, power 161 KW • Automatic transmission • Maximum total weight 11990 kg, death weight 7650 kg • Rear twin tyres • Drivers cabin with 2 seats, air conditioner, electrical window lifters • CHEREAU refrigerated box, total box dimensions 6500 x 2600 x 2500 mm, with lateral door, THERMO KING V-700 MAX cooling unit, the contents in the box are included • ANTEO F3RE15HW123AM tail lift truck, maximum load 1500 kg, year of manufacture 2010 • Emissions level: Euro 5 • ATP FRC-X certificate valid until 11-2025 • Mileage 386703 km according to the counter • This vehicle is delivered with only one set of keys • Ownership change costs will be paid by the buyer • MOT certificate costs will be ...
new
faceplate diameter:2500 mm swing diameter:3000 mm turning height:1700 mm max. turning diameter:2800 mm weight of the machine ca.:53 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer
new
faceplate diameter:2000 mm swing diameter:2500 mm turning height:1700 mm max. turning diameter:2300 mm weight of the machine ca.:52 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer
new
faceplate diameter:1000 mm swing diameter:1350 mm turning height:1070 mm total power requirement:75 kva weight of the machine ca.:25 t dimensions of the machine ca.:5,3x4,6x5,5 m Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer
new
faceplate diameter:1250 mm swing diameter:1600 mm turning height:1350 mm max. turning diameter:1350 mm weight of the machine ca.:32 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer
new
turning diameter:1250 mm swing diameter:1100 mm turning height:1000 mm total power requirement:37/45 kW weight of the machine ca.:18 t dimensions of the machine ca.:4500x2520x4605 mm Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer
new
:YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000 faceplate diameter:1000|1250|1600|2000 mm swing diameter:1350|1600|2000|2500 mm turning height:1070|1350|1350|1700 mm max. turning diameter:1150|1350|1800|2300 mm table load:4|5|8|10 t table rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/min max. torque on the faceplate:10000|12500|18500|54000 Nm Travel of Ram (vertical):800 | 900 | 900 | 1000 mm Travel of ram (horiz.):1350 | 1475 | 1650 | 2275 mm ram head dimension:230 x 230|250 x 250|250 x 250|280 x 280 mm rapid power traverse in X-and Z direction:10/12|10/12|10/12|10/10 m/min feeds:0,1 - 50 mm/U feed speeds:0 - 1260 mm/min Tool changer:12 (C-Achse mit 16) drive capacity - spindle motor:37/45| 37/45 (60/75 opt.)| 37/45 (60/75 opt.)| 37/45 (60/75 opt.) kW Machine height: 5330 |5500 |5500|6600 mm machine length:4600 |4700 |5050| 4950 mm machine width:5500 |5800 |6300|7320 mm weig ...
new
:YS-VL-3000 faceplate diameter:3000 mm swing diameter:3500 mm turning height:1650 mm max. turning diameter:3400 mm table load:40 t table rotation speed:2-40/41-120 U/min max. torque on the faceplate:64500 Nm Travel of Ram (vertical):1000 (1400 opt.) mm Travel of ram (horiz.):2775 mm ram head dimension:280x280 mm rapid power traverse in X-and Z direction:10/10 m/min feeds:0,1 - 50 mm/U feed speeds:0 - 1260 mm/min Tool changer:12 (C-Achse mit 16) tool taper:SK50/BT50 drive capacity - spindle motor:60/75 (75/100) kW Machine height:6700 mm machine length:6100 mm machine width:8700 mm weight of the machine ca.:69000 kg repeating accuracy:0,005 mm hydraulic motor:3,75 kW servo motor X-axis:7 kw servo motor Z-axis:7 kw coolant pump drive:2,2+1,1 kW :150 kva CNC controller:Siemens/Fanuc/Fagor coolant system:700 Liter automatic tool changer:16-fach 4-jaw faceplate Ø:s. oben CNC controls from:Sie ...
new
:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...
new
faceplate diameter:4000 mm swing diameter:5000 mm turning height:2500 mm max. turning diameter:5000 mm table load:40 t table rotation speed:0,1-80 (2-stufig) U/min max. torque on the faceplate:108000 Nm Travel of Ram (vertical):1800 mm Travel of ram (horiz.):-2500~+2900 (aus Tischmitte) mm ram head dimension:300x300 mm spindle speed:10-2500 (2-stufig) 1/min spindle taper:50 SK rapid power traverse in X-and Z direction:10/10 m/min feed speeds:1-3000 mm/min Cross rail travel :1680 mm Tool changer:12-fach für rechten Stößel (für Drehwerkzeuge) Tool changer:60-fach für linken Stößel (für Fräswerkzeuge) tool taper:SK50/BT50 Machine height:s. Anlage mm machine length:s. Anlage mm machine width:s. Anlage mm drive capacity - spindle motor:18,5/22 kW coolant pump drive:3 kW servo motor X-axis:9 kw servo motor Z-axis:9 kw table drive:100 kW :300 kva positioning accuracy:0,01/500 mm repeat ...
new
faceplate diameter:5000 mm swing diameter:5200 mm turning height:3000 mm max. turning diameter:5200 mm Travel of Ram (vertical):1500 mm Travel of ram (horiz.):+/- 2500 mm ram stroke speed:15000 mm/min cutting capacity:150000 Nm in X-/Z-Achse ram head dimension:400 x 400 mm CNC controller:Siemens/Fanuc/Fagor Rams:2 Stk. Scales:v. Heidenhain servo motors:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor ATC:32/60/90 fach Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coo ...
used
Grooving machine for throughfeed process Brand: Vitap Type: Grooving New machine For the processing of acoustic panels Processing unit: - Shaft with 7 presettable saw blades, distance 30mm. - Blade thickness 4mm - Rotation of the shaft , 7000 rpm. - presetting with rapid hook HSK - Max diameter of the blade 125mm Workpieces: - Max. thickness of the panel 50mm - Max weight of the panel: Kg 50 - Max panel size : X no limit, Y 1200 mm, Z 50 mm - Min panel size: X 400 mm, Y 300 mm, Z 12 mm - Panel feeding speed : 25m/min Characteristics: 3 controlled axes: - X Axis - Panel movement with two dinamic clamps - Y Axis - Grooving head movement with pinion and precision rack - Z Axis - Movement with screw at spherical recirculation - Newly patented, high rigidity operating unit movement on Y and Z axis. - Constant side pushing to keep the 0-line - Positioning ...
used
CNC punching machine Brand: Vitap Type: MICRA New machine High-Performance CNC machine for the production of acoustic panels with Micro-Perforation - Every 4 seconds the punching of 1.000 up to 2.331 holes are possible (depending on the workpiece) 3 controlled axes: - X-axis: drive via 2 motors and planetary reduction gear, guidance via pinion and rack - Y-axis: drive via 1 motor and planetary reduction gear, guidance via pinion and rack - Z-axis: drive via central hydraulical unit Easy handling with TPA control - Virtual display of programmed punching holes in the CAD environment - Optimization software for the working process - LCD TFT Monitor 20 - USB port - Basic Version CAD TPA - Macro programming Processing head - 5mm grid in X- and Y-direction - Punch depth: 3mm - Changable punching tools The processing head can optionally be customized ...
used
Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...
used
CNC boring machine Brand: VITAP Type: POINT 2 New machine Vitaps smart solution for throughfeed drilling and grooving with autom. panel return to operator 3 controlled axis - Axe X Uninterrupted movement of the panel due to a ?New patented belt transport system?. - Axe Y Movement of the drilling head - Axe Z latest generation motor and ball screw. - No limit in panel length Perfect for batch 1: - Setup time = 0 - High productivity and flexibility Easy TPA programming - Monitor LCD TFT 19 5/4 Usb port for loading programs run on a station in each office - Cutting optimization Software - Graphics programming CAD TPA, base version - Saving all files with all data - Macro Programming - Import DXF files - Control: Full Parametric - Office programming software TPA Technical data: - 9 vertical independent spindles - 2+2 horizontal spindles on X ax ...
used
Measuring device for air conditioners, air conditioning systems, cooling units, calibration hand pump, calibration pressure pump, calibration pump -Manufacturer: Beamex, pneumatic hand pump with case -Type: PG300V -Pressure range: 0...20 bar / 0...300 psig -Accessories: incl. see photos -Dimensions: 230/140/H245 mm -Weight: 2.7 kg
used
Refrigerant recovery system, vacuum pump for air conditioners, air conditioners, refrigeration units, differential pressure gauge -For use in: air conditioning systems with recovery, CFC, HFC and HCFC -Dimensions: 300/400/H320 mm -Weight: 19kg
used
We sell our LAMEC 520, which was in use until recently, with die quick coupler; Drive press: new motor 1x 75kW with 1450rpm + alternatively 1x 110kW with 985rpm for biomass, incl. 2 pcs Pcs conditioners and 2 pcs dosing units frequency controlled; Control with star/triangle combination for 75kW motor, incl. several roller wheels and various dies; built-in die 4x40 for animal feed,
used
Potato processing line (French fries and split potatoes),, - French fries - line, Potato (French fries) processing line,, Output: approx. 220 kg per hour based on the end product,, French fries dimension 10x10x60 mm, consisting of:, feed bunker with stone catcher,, Carborundum - roller peeler, number of peeling rollers: 7,, Length of the peeling rollers: approx. 2,700 mm, new rollers, with interchangeable roll set for quick replacement of the rolls,, alluvial basin with discharge - elevator,, Bunker conveyor belt, make Marcelissen, type BNT 350-400, Knife block, make Marcelissen, 11x11 mm, Extension conveyor belt with small container, Marcelissen, Roller sorting table, make Marcelissen, type IR 2000-600, Narrow piece sorter, make Marcelissen, type FR4-1750, Flipmaster, make Marcelissen, type 902 MA, With swiveling supports, Continuous fryer make Riehle, type DLA 300 SC-3, 54 kW, vHi, Wit ...