concrete used for sale

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

This machine can be considered as an ultimate solution for the production of concrete elements providing the one to choose numerous options as an additional upgrade to the machine that can make production even more efficient: Filling box on servo drives Filling boxes both from the coarse mix and face mix powered with 2 servo motors create fast movement back and forth contributing reliable filling of the mould. As for the coarse mix device filling box it is additionally equipped with an agitator (driven by the hydraulic cylinder) for equal and fast filling. Servo vibration Hi-dynamic Servo vibration system transmits power for the high compaction with the just right consumption of electrical power to vibration table consisted of impact and ledge bars and thus providing top-quality paving stones, blocks, curbstones as well as any other products which modern demanding market requires ...

50 lfm pallet rack Nedcon New, see pictures! A top shelving system from the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 7 m Depth 110 cm, blue Carrier length 2.7 m orange Carrier with load /compartment 3050 kg Negotiation price: € 8.750,-- net from stock Offer consists of: + 19 st. frame pre-assembled, depth 110 cm, height 7 m +144 st. girder, length 2.7 m, 3050 kg load/compartment +288 St. Suspension fuses + 38 concrete anchors Payload signs documents etc. are self-evident. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher field loads possible on request. Carrier orange RAL 2008. Carrier lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and  ...

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

description: Various scond hand crate conveyors Krones/ KHS/ Gebo for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 440m used case conveyors (predominantly Krones,KHS, and Gebo). Available immediately. When buying items we always pay attention on famous manufacturers an tough quality . Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of cou ...

Construction debris / concrete shafts, suitable for Arjes Impactor 250 with quick-release cassette and dust-tight bearing lid - ready for installation - incl. transport frame ! We are happy to take care of the transport for you and build a professional !

Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG  ...

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5  ...

Stand:2000x1100 mm/Trusses:4000 mm/Tray load: 0.7to We offer you here a new / used pallet racking system of the manufacturer Stow for sale. Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 20,600 mm Number of fields per row of shelves: 05 pcs á 4,000 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 06x pallet rack stand, new Material colour: RAL 5015 blue Profile abbreviation: 100 x 65 x 2 mm Profile Type: PLFB 15 Incl. transverse and diagonal struts, Base plates The stands are unassembled ( screwed truss ) 2,000 mm high 1,100 mm deep 20x pallet rack traverse, used Material colour: RAL 2004 orange Box profile: 100 x 50 mm Truss type: PNB0480 Agraffe: 4 HK (hooks) Clea ...

REI 11 Cutting and straightening system Progress Concrete steel processing Y.O.M. 2007 Price from location S-Anhalt

description: Used Glideliner for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx.6 used glideliners; from 15.000 bottles/h up to 45.000 bottles/h, available immediately Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! ...

description: Various second hand full-crate-Inspections (Krones / KHS/ Gebo) for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 5 used full crate inspectors (predominantly Krones,KHS, and Gebo). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also  ...

description: Various second hand tray- and carton conveyors Krones/KHS/Gebo for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 140m used Tray-and carton conveyors (predominantly Krones,KHS, and Gebo, available immediately). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger pr ...

description: Second hand crate-turning-stations for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 21 diverse used crate-turning-stations. When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our ...

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 24,605 mm Number of fields / shelf row: 09 pcs á 2,645 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profile: 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 36x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Traverse type: 2T 120 Clear width: 2,645 mm load per pair of trusses 1,500 kg, with the same. distributed load 72 ...

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 30,660 mm Number of fields / row of shelves: 11 pcs á 2,700 mm Number of levels plus floor level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 09 pcs. Total pallet spaces: 99 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg Included in delivery are: 12x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profilem.: P 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 44 ...

description: Various second hand Krones/KHS/Schäfer pallet-centering/pallet control units for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 14 used pallet-centering/pallet control units (predominantly Krones and KHS, available immediately). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. C ...

description: Is needed when pallets are moved sideways. (only hardware at the conveyor, without interior for the switchboard/software) fitting safety fence and safety installation available. please ask for seperate quote. e.g. for Euro pallets moving longitudinally, with rollers length: 2 x 1500 mm width: 2 x 1260 mm height: 2x ca. 600 mm transport size: 2000 x 3000 x 1000 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your i ...

description: Used Pallet infeed and outfeed for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 14 pallet infeed and outfeed (predominantly Krones,KHS, and Gebo, available immediately). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you  ...

We offer a Doka Frami wall and foundation formwork 223m² complete with many accessories. The formwork is 90% newly covered with new Finply birch formwork 220- 240g/m²phenolic resin coating. The rest of the elements are controlled and sorted and covered with original Doka Xlife formlining. Fair-faced concrete class 2/3 possible without any problems. New value approx. 156108,00€ Special price 62359,00€ 3 Frami Xlife element 0,90x2,70m 1 Frami Xlife-Uni-Element 0,90x2,70m 3 Frami Xlife element 0,75x2,70m 3 Frami Xlife element 0,45x2,70m 19 Frami Xlife Element 0,30x1,50m 2 Frami Xlife element 0,45x1,50m 51 Frami Xlife element 0,60x1,50m 35 Frami Xlife element 0,75x1,50m 2 Frami Xlife element 0,75x1,50m 7 Frami Xlife element 0,90x1,50m 6 Frami Xlife element 0,90x1,50m 9 Frami inner corner 1,50m 20cm 2 Frami inner corner 1,50m 20cm 7 Frami outer corner 1,5 ...

description: Various second hand pallet-turning-stations Krones/KHS/ Schäfer for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 24 used pallet-turning-stations (predominantly Krones,KHS, and Schäfer, available immediately). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger  ...

90 running meters pallet rack Stow Used goods, very good condition, see pictures Height 6 m Depth 100 cm Beam length 2.70 m Load/tray 3000 kg Frame blue Carrier orange Negotiation price: € 8.650,-- net ex stock Offer consists of: + 33 frames pre-assembled, 12t field load, depth 100 cm, height 6 m + 192 beams, length 2.7 m, 3000 kg load/compartment + 384 pcs hanging devices + 132 pcs concrete anchors Payload shield Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are looking for or constantly offer numerous ar ...

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

60 m tyre rack Nedcon New & used goods, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/tray 1000 kg Frame Blue Strap blue lacquered Negotiation price: € 5.250,-- net ex stock Offer consists of: + 16 frames pre-assembled, depth 50 cm, height 3 m + 90 beams, length 3.7 m, 1000 kg load/compartment + 180 pcs hanging devices + 64 pcs concrete anchors Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are looking for or constantly offer numerous articles from various areas broom-clean eviction ...

Stationary block machine SUMAB R-500 – automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated). Working pallet dimension: 1400 x 700 mm. Useful area Max.: 1250 x 650 mm. With stationary block making machine Sumab R-500 following concrete products are produced on efficient way: hollow blocks, insulated blocks, paving stones, curbstones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm) For more information, please send a request.

Our company currently offers the R-1000 stationary concrete block machine. The SUMAB R-1000 is one of the most technologically advanced machines on the market! A giant among all block machines! Real money maker! Using a SUMAB R-1000, you can produce the following products: • Empty blocks • Curb stones • Paving stone • Tiled stone Technical details: • CAPACITY - 1000 m2 pavers per shift. • BLOCKS 20X20X40 18000 pieces/8 h Scandinavian quality and good prices! Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

15 m tire rack Nedcon New & used goods, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/tray 1000 kg Frame Blue Strap blue lacquered Negotiation price: € 1.150,-- net ex stock Offer consists of: + 4 frames pre-assembled, depth 50 cm, height 3 m + 18 beams, length 3.7 m, 1000 kg load/compartment + 36 pcs hanging devices + 16 pcs concrete anchors Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are looking for or constantly offer numerous articles from various areas broom-clean evictions  ...

We offer a Peri Trio formwork system 172,30m² complete with accessories. The elements are all in top used condition, or covered with new Finply formlining. Fair-faced concrete class 2/3 possible without any problems. Elements TR 270 12 Element TR 270 x 240 8 Element TR 270 x 120 8 Element TR 270 x 90 4 Element TR 270 x 72 4 Multipurpose element TRM 270 x 72 10 Element TR 270 x 60 8 Element TR 270 x 30 new formlining 2 formwork elements TR 270x 24 new formlining 6 corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 compensating bars TAR 85 12 Scaffolding bracket TRG 80 2 displacement hooks MAXIMO 1.5 t 1 transport hanger MX new 2 reusable containers steel 80 Prestressing steel DW 15/0,85m new 160 mother joint plates, new purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair cond ...

45 running meters pallet rack SSI Schaefer Palflex incl. insert grid Used goods, good condition, see pictures Year of construction 2006 Height approx. 6.5 m Depth 120 cm Field load 12000 kg Galvanized frame Carrier red Insert grid included! 2 grids per 2.7 meter beam length Negotiation price: € 6.590,-- net ex stock Offer consists of: + 17 frames pre-assembled, depth 120 cm, height approx. 6.5 m + 96 beams, length 2.7 m, 1500 kg load/compartment with evenly distributed load +192 pcs Hanging Arresters + 96 galvanized insert grids for 48 levels of 2.7 meter beam length + 68 pcs concrete anchors Stress plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and  ...

Design: Machine base and plinth integrated in a steel housing, composit concrete interior, Steel sleeves on the floor for fixing Table: welded steel plate structure Manufacturer: Framag hydropol Model: 7447 Overall dimensions: 3700x3200x3600mm Weight: 22000kg

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 8,580 mm Number of levels plus floor level: 02pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row of shelves: 27 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg Included in delivery are: 04x pallet rack stand, used Material color: blue Stand profile abm.: P 120 mm or P 100 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,100 mm deep 12x pallet rack traverse, new Material colour: RAL 2001 orange Traverse type: 2C-S 1115 Box profile: 110 x 50 mm Clear width: 2,700 mm W ...

Technical data and further information: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,900 mm Number of fields per row of shelves: 01 pcs. á 2,700 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendz. galvanized Profile type: P 115 Stand profile feature: 100 x 100 x 2.50 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 2,300 mm high 500 mm deep 04x pallet racking trusses, new Material color: blue Box profile: 110 x 50 mm Agraffe: 5 HK (hook) clear width: 2,700 mm load per pair of trusses 3,000 kg, at the same time. distributed load 02x push-through safety devices, second choice Consisting of: 01x C-profile, second choice Mate ...

50 m pallet rack Jungheinrich type MPB new goods New product, see pictures Height 9 m Depth 110 cm, blue Beam length: 2.7 m, yellow Carrier with load / compartment 3000 kg Negotiable price: € 13,290,-- net from stock Offer consists of: + 19 pcs frame pre-assembled, depth 110 cm, height 9 m + 144 pcs carrier, length 2.7 m, 3000 kg load/compartment + 288 pcs suspension locks + 78 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue, infills galvanized. 3.5 m to 9 m heights in stock. Field load 12 tons. Strap yellow. Goods are in stock. Transport and assembly possible on request. Viewing is possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Ch ...

Support bracket Universal F 4,50m For concreting heights up to 4.00m The "Abstützbock Universal" is a simple and uncomplicated way to support formwork with attachments up to a maximum height of approx. 4.0 m. Features: ▪ Suitable for beam and frame formwork. ▪ Tensile forces are reliably transmitted by diagonal armatures. ▪ Adaptation to the different fresh concrete pressures Required is simple and economical – simply increase or decrease the distance between the load-bearing structure, frame. 17 pieces available EUR 721,00 per pcs.

CEMENT PLANT BATCHING PLANT CONC. BATCH PLANT 210M3/HR-200KW BP210CMPH (Type I Portland Cement shall be used) Make: Hosan Engineering Co.,Ltd.Edit Make Model: HSBP-210MS Cement Plant control panel Silo tank- 2 units compressor water tank - 2 units Cement mixer Crusher plant Crusher 1 conveyor - 3 units crusher w/ wheels control panel Crusher 2 conveyor - 4 units crusher w/ wheels Control panel Concrete Hollow Block Plant Maker: Harex Eng’g Co. Ltd. Model: H212 mixer conveyor - 2 units Hollow block molder/press control panel Capacity: 210 m/ Hr Make: Hosan Engineering Co.,Ltd. Model: HSBP-210MS Capacity: 210 m/ Hr

TECHNICAL SPECIFICATIONS (impact crusher) Manafacture: SBM Designation: Impact crusher Version: Semi-mobile Type: RHS 12/12/4 Year of construction: 1998 Drive cable: 160 kW Drive type: V-belt Throughput: 130 t/h Inlet opening (width/depth): 1,264 / 1,047 mm Maximum feed size: 800 mm Number of blow bars: 4 pcs. Rotor diameter: 1,280 mm Rotor speed: 33.3 m/s Weight impact crusher: approx. 15,500 kg SPECIFIC COMMENT - Selective crushing of soft to medium-hard natural stone, reinforced concrete and rubble - Without grinding track - Can also be used as a secondary crusher OVERALL SYSTEM CONSISTING OF: - SBM impact crusher RHS 12/12/4 - Feed hopper with vibrating chute - Bar sieve for pre-screening - Outlet channel - Discharge conveyor - Overbelt magnet - Stockpile conveyor - SIMENS Simatic OP7 controller -Structural steelwork - Generator set - Optionally a ...

description: Various second hand conveyors Krones/KHS/Gebo for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 370 m used bottle conveyors (Available immediately) When buying items we always pay attention on famous manufacturers an tough quality Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an ...

Stand:8750x1100 mm/Trusses:2300 mm/Tray load: 2.4to Technical data for the pallet racking system: Shelving system: Polypal Type: Maxipal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 21,800 mm Number of fields per row of shelves: 09 pcs á 2,300 mm Number of levels plus floor level: 05 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand type: MXMO 5225P Stand profile: 110 x 83 x 2.5 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 8,750 mm high 1,100 mm deep 90x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 2 HK (hooks) Version: Head traverse Clear width: 2,300 mm load per pair of trusses 2,400 kg, with the same. distributed load 180x safety pins,  ...

Shelf stand: 9,650 mm x 1,100 mm / Clear width: 2,700 mm Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 20,020 mm Number of fields / row of shelves: 07 pcs á 2,700 mm Number of levels plus floor level: 05 pcs. Technical data on the volume: Pallet spaces per field: 18 pcs. Pallet spaces per row: 126 pcs. Total pallet spaces: 126 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg The scope of delivery includes: 08x Pallet racking stand, used Material color frame: sendz. galvanized Material color truss: blue Profile dimensions: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-as ...

Shelf stand: 9,650 mm x 800 mm / clear width: 2,700 mm Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 17,180 mm Number of fields / row of shelves: 06 pcs á 2,700 mm Number of levels plus floor level: 05 pcs. The scope of delivery includes: 07x Pallet rack stand, used Material color frame: sendz. galvanized Material color truss: blue Profile dimensions: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 9,650 mm high 800 mm deep 60x pallet racking beam, new Material colour: Ral 2004 orange Box profile: 130 x 50 mm Truss type: PNB 0413 S355MC Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,000 kg at the same time. distributed  ...

Stand:8750x1100 mm/Trusses:2300 mm/Tray load: 2.4to Technical data for the pallet racking system: Shelving system: Polypal Type: Maxipal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 142,300 mm Number of fields per row of shelves: 59 pcs á 2,300 mm Number of levels plus floor level: 05 pcs. Included in delivery are: 60x pallet rack stand, used Material color: blue Stand type: MXMO 5225P Stand profile: 110 x 83 x 2.5 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 8,750 mm high 1,100 mm deep 590x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 2 HK (hooks) Version: Head traverse Clear width: 2,300 mm load per pair of trusses 2,400 kg, with the same. distributed load 1.180x safety pin ...

Shelf stand: 9,650 mm x 1,500 mm / clear width: 2,700 mm Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 22,860 mm Number of fields / row of shelves: 08 pcs á 2,700 mm Number of levels plus floor level: 05 pcs. The scope of delivery includes: 09x Pallet rack stand, used Material color frame: sendz. galvanized Material color truss: blue Profile dimensions: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 9,650 mm high 1,500 mm deep 80x pallet rack traverse, new Material colour: Ral 2004 orange Box profile: 130 x 50 mm Truss type: PNB 0413 S355MC Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,000 kg at the same time. distrib ...

Stand 2250x1000mm/ trusses 2705mm/ shelf load 3,30 to Technical data for the pallet racking system: Shelving system: Duwic | Cornix Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 25,345 mm Number of fields / row of shelves: 09 pcs á 2,705 mm Number of levels plus floor level: 02 pcs. The scope of delivery includes: 10x pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,250 mm high 1,000 mm deep 36x pallet rack traverse, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Agraffe: 3 HK (hook) Clear width: 2,705 mm max. load per pair of trusses 3,300 kg at the same time. distributed load 72x locking pins, used Version: complete. galvanized To secure ...

Technical data for the pallet racking system: Shelving system: Polypal Type: Stockpal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 12,010 mm Number of fields / shelf row: 05 pcs á 2,300 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 06x pallet rack stand, used Material colour: similar. Ral 7021 anthracite grey Stand profilem.: P 85 x 63 x 2,00 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,100 mm deep 20x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 5 HK Clear width: 2,700 mm load per pair of trusses 2,400 kg, with the same. distributed load 40x safety pins, used Material color:  ...

TECHNICAL SPECIFICATIONS Designation: Concrete ramp Version: mobile, 2-piece Weight: approx. 5 t per block Slope: 15° Transport dimensions per block (length/width/height): 4,470 x 1,200 x 1,000 mm SPECIFIC COMMENT - Mobile ramp system to increase the discharge height - Mudguards at the tips - Metal construction fixed to the blocks for securing

Concrete distributor company Schwinghammer Austria, year of construction 1995, 12 KW

18 transport pallets for concrete walls or similar and 1 pallet lifter