concrete used for sale

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

Peri Trio 552m² Peri TRIO is a craneable formwork system that can be used upright or horizontally. Thanks to the patented BFD directional lock, all element connections are made flush, aligned and tight.  The only necessary connecting part for normal element joints, external/inner corners, articulated corners, shims up to 10 cm or the clamping of squared timbers is the BFD directional lock (can be operated with one hand). With just a few element widths, all floor plans can be formed. The powder coating prevents the concrete from adhering and allows for easy and quick cleaning. Maximum allowable fresh concrete pressure: 80kN/m2 Peri Trio 552m² Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight.  The only necessary connecting part for normal e ...

- n.10 iron elements including gratings, gratings and more for scrap; elements for air conditioning system; n.1 low steel cabinet with doors Sliding; n.3 pallets of gypsum tiles 500x750 mm; n.10 ad polystyrene arch for concrete castings; n.10 pallets of various bricks including piñatas for floors, tiles, bricks, poroton type blocks of various measurements, type and Marseille tiles; n.3 pallets of tiles for internal/external mm 150x150; n.3 pallets of curbs, both straight and curved for sidewalks; n.1 igloo pallet for ventilated floor; n.4 pallets of self-locking grey concrete of various shapes and thicknesses; n.2 pallets of grey concrete blocks of various thicknesses; n.1 pallet of Cement roof tiles of various colours double Roman type - DEPOSITED IN OVANENGO (BS) - n.5 pallets of self-locking of various shapes and sizes; n. 3 baskets of Horizontal and vertical r ...

1 Gebr. Twin, column and truss formwork Formwork length: 25,000 mm max. concrete part basic height: 1,100 mm max. extension height: 2,000 mm min. concrete part width: 200 mm max. concrete part width, one-sided: 800 mm max. concrete section width, opposite: 600 mm

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

Galvanized fence fields, new with concrete feet and joints. Offer: 20 hoarding fields stand type with 21 feet of concrete and 20 connector = 699,00EUR + VAT = 34,95EUR / piece. Also available separately! The fields are with tubular steel frame, the stuffing out of 2.50-3, 00 is welded to the tube mm steel wire inside. The elements are completely galvanized. 1 x construction fence field 2, 00 m x 3, 47 m = 27,90EUR + VAT 1 x construction fence titanium reinforced on the corners at top prices only 29,90EUR + VAT 1 x construction fence / visibility protection net, 1, 76 m x 3, 41 m = 9,90EUR + VAT 1 x construction fence box 1, 20 m x 3, 47 m = 24,90EUR + VAT 1 x Bauzaufeld 2, 00 m x 3, 47 m more anti climbing = 37,00EUR + VAT 1 x concrete foot 5,90EUR = tax 1 x plastic foot 6,90EUR = tax 1 x plastic foot made of 100% recyclable plastic 9,90EUR + VAT 1 x = element con ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: B79qqiplcm - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pall ...

NOE Alu L A lightweight system that can be used to work independently of the crane. The NOEalu L convinces as a real hand formwork, due to its low weight, high flexibility and durability. The low weight of 21 kg/m² Ensures long-term productive Work, even without a crane. The sturdy construction will meet the to cope with the stresses of everyday construction site life. Flexible thanks to a wide, Vertical or horizontal table assortment. The Alulock connects the various components of the system as reliable as it is escaped. The individual panels allow a concrete pressure of up to up to 60 kN /m². NOE Alu L A lightweight system, for work without crane. The NOEalu L convinces as an Hand formwork, due to low weight, high flexibility and durability at the same time. The low weight of 21 kg/m² ensures a permanently productive work, even without a crane ...

Doka Frami panel formwork 335 m2 Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Quick and universal use thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to a practical element grid Excellent concrete results due to particularly stable design Doka Frami Framed formwork 335 m2 Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and plann ...

TECHNICAL SPECIFICATIONS Manufacturer: STETTER (Germany) Designation: Concrete recycling plant Type: RA 20 Year of construction: 1994 Normal concrete washout capacity: 20 cbm/h Required rinsing water volume: max. 15 cbm/h grain size: 63 mm Separating cut: 0.20 mm Drive power washing drum: 2 x 4 kW Rinsing water pump washing drum: 2.36 kW SPECIFIC COMMENT - incl. washout pump - Operational and fully functional - Excl. agitators and dirty water pump

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 2150 mm - Width : 1350 mm - Total height: 2700 mm - Ground clearance: approx. 350 mm (on concrete wall) Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3800 mm - Width : 1850 mm - Total height: 2700 mm - Ground clearance: approx. 350 mm (on concrete wall) Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Fully automatic system with 1 vibrating press locksmith BH 30 For production e.g. : - Concrete blocks, bricks, partition bricks - Soundstones -Curbs - Fireplace stones -Gutter - Ceiling stones, etc. - Stationary vibropress BH 30 with two filling parts for two-layer products - Chain conveyors for fresh side - Sliding tracks for dry side - 1x mast and 1x lowering scaffold - Kuboter for the removal of hardened stones from the return transport on the parcel transport - Production pallets 1400x800mm – 0 pcs Product height : from 55 to 550 mm The new automation : Siemens S7 The control of the vibrator with frequency converter Incl. approx. 5 pcs, different shapes Fully automatic system with 1 vibropress locksmith BH 30 for production of for example concrete blocks, wall stones, partition stoner -Sonic Stones -curbs -fireplace stones -Gutter -ceiling stones -stationa ...

Cold water tank, second-hand, Fabr. Gresser, net capacity: 400 hl; Total capacity: approx. 427 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Brewing water tank, used, Fabr. Gresser, net capacity: 250 hl, total capacity: approx. 265 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Extrusion Storage, Fabr. Gresser, total capacity: 169.20 hl, operating overpressure: 6 bar, in chrome-nickel steel 1.4404/1.4571, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a pedestal frame, Ø: 2,140 mm, total H: 7,673 mm,

Complete plate production plant OCEM / Cassani consisting of: - Dosing and mixing system Attachment mixer (Teka) like new (approx. 3 years old) - OCEM OPA108SB plate press with moulding device 400x400 4-fold - Attachment doser STP825 - Double washout system for exposed concrete (4-fold washing) - Flat shelf with transfer table - approx. 2,600 steel pallets - Cassani calibration machine - Grinding machine Cassani - Coating system with paternoster - Packaging line (built in 2019) Complete tiles/slab production line OCEM / Cassani consisting of: - Dosing and mixing plant - First layer mixer (Teka) as new (approx. 3 years old) - Double layer hermetic tile/slab press OCEM OPA108SB with mould equipment 400x400 4-fold - First layer dosing unit OCEM STP825 - Double washing system for washed concrete/exposed aggregates - Flat depositing system ...

2 warehouses, gable roof, 280m2 and 72m2 - used -: Hall 1 (280m2) = 25.000.-€ (net), dismantled, packed and loaded! Hall 2 (72m2) = 10.000.-€ (net), dismantled, packed and loaded! Condition: good – very good Available from June 2024 Location: 50374 Erftstadt Hall 1: Manufacturer: Tepe Type: SD 10.08m, multi-purpose hall in steel structure Year of construction: 2007 Metrics: Width: 10.08m Length: 8 fields à 3.50m = 28m Eaves height: 4.55m Ridge height: 5.05m Lateral interior height: 4m Frame spacing: 3.50m Snow load: 0.85 kNm2 Wind Load: Zone 2 Inland Building materials: Softwood of sorting class S10/MS10 Concrete C25/30, reinforcing steel BSt 500 Hollow sections S235JRG DIN EN 10025 Structural steel S 235JRG DIN EN 10025 Trapezoidal steel sheets StE 320-37. Dowels according to letter of approval Screws 5.6 Pitched roof with a low roof pitch of 6  ...

100,000 pieces of Hilti bolt anchor HSV M12x100 Special items, new goods see pictures Concrete; Economical expansion dowel for non-cracked concrete (carbon steel) Material, corrosion: carbon steel, galvanized Head Configuration: Male Thread Retail price: € 0,49 net for purchase of 240 pieces Retail price: € 0,79 net for purchase of 30 pieces Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Concrete pulverizer, concrete tongs, attachment used for excavators. Manufacturer: MUTLEY Type: C116 with quick coupler Total approx. 3000 x 750 x 1300 mm The device comes from a warehouse liquidation and is probably unused. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 7.000 liter per hour., Standardization capacity: 10.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. The percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 7.500 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special S ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 10.000 liter per hour., Standardization capacity: 15.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 15.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 12.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 10.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

Pallets Carousel for Double Wall (Twin Wall) and Filigree Floor Production, MFA M24514 Manufacturer: Vollert, Nuspl, Weckenmann, EBAWE, Filzmoser, RATEC, Unitechnik, SAA Year of construction: 2020, 2019, 2017, 2003, 1991 Control system : Siemens S7, Unitechnik Products: Twin Walls (max. height 3.0m), Filigree Floor Slabs PALLET CIRCULATION Pallets: 10.60m x 3.08m, 48 pieces STRIPPING AND LIFTING Hydraulic tilting station (EBAWE company, renewed in 2017) Lifting device for shell 1 + floor element (Weckenmann) CLEANING, PLOTTING, ROBOT-SHUTTERING AND OILING Automatic pallet cleaner, plotter, shuttering robot (Weckenmann, renewed in 2020 and 2003) STEEL REINFORCEMENT, ROBOT, WIRES, FILIGREE GIRDERS Automatic longitudinal and cross wire machine, diameter 6-14 mm, lattice girder preparation, Automatic insertion robot for laying all bars, as well as the lattice girders  ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 15.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 12.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 10.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 10.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 15.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 10.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 5.000 liter per hour., Standardization capacity: 7.500 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless AISI 304., - Bowl with disc stack, made out o ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 6.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 8.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Stable drilling machine for core drilling up to borehole diameters of 1250mm; suitable for reinforced concrete; Including hydraulic power unit HAG-12.10; Including drill bit DN 1200 (length 160 cm) with used segments, DN 1000 (length 145 cm) with worn segments and DN 1000 (length 80 cm) without segments; including 1 set of new diamond segments for drill bit DN 1000 for reinforced concrete

High Strength Packaging Tape Production Line The equipment consists of: - Loading trolley - Drum type unwinder - Welding machine unit - Flaw detector - Centering device block - Disc shear block - Burr flattening unit - Loop pit No. 1 (concrete pit lined with sheets) - Separating roller - Device for individual belt tension - Braking unit (felt) - Tape edge processing unit - Pulling rollers - Pre-heating bath - Final heating bath - Cooling bath - S-roller block - Water cooling bath - Varnishing bath - Drying oven - Bath waxing tape - S-shaped rollers - Vertical tape storage - Loop pit No. 2 (concrete pit lined with sheets) - Braking unit (felt)

- Tanks standing on concrete base - Flate floor with slope - Content: 57 000 liters - Material: stainless steel AISI 316 / DIN 1.4404 - Vertical on concrete base - Flat bottom with slope - Diameter: 4 m - Height: approx. 5.60 m - Residual drain, ball valve DN 50 - Clear drain, ball valve DN 50 - Oval manhole - Taster - Level indicator - Cleaning pipe with washing ball - Dome DN 400 mm - Aeration and ventilation connection DN 50 - Trickling ring - The entire tank farm is in very good condition

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). Snow load: 1.25 kN/m2 (DIN 1055-5 July 2005). Seismic zone: 3 (DIN 4149-4 April 2005). STRUCTURE: The primary structure consists of hot-rolled and hot-dip galvanized IPE solid profiles. Main f ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Machinery and equipment for the production of concrete blocks, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buye ...

Vibration table / table We offer: used vibration table / table Condition: good, ready for use Manufacturer: unknown Year of constr.: 1995 estimated Dimensions: Width: 3500 mm Length: 8000 mm Height: 550 mm Steel quantity: approx. 8 mm Weight: estimated 3500 kg Vibration / vibration motors: 6 pieces Manufacturer: Bosch Type: Connection data: 250 V, 3 A; 1.0 KW; 200 Hz Speed: 5700 RPM The supply of vibration / vibration motors via a central frequency converter Bosch (for 2 toggle vibration tables and 6 vibration tables. This when purchasing multiple systems can be purchased: Technical data frequency: Produced for Bosch from the Flender sky / Tübingen Type: 2 GR132/135 (poorly readable) Motor: 11 KW, 380 V, 50 Hz; 22.5 A, 2880 rpm, cos.phi 0,89 Converter sec.: 11 / 12,5 KW; 250 V, 200 Hz, 2 26, 4 / 28; 9 A Control: Bosch Accessories: 2 or 4 forms for dominoes (see photos) More ...

Rubber buffers / silent blocs for concrete block machines Brands: SCHLOSSER, Hess, Masa, Omag, Rekers, Frima, Techmatic Web: contec-ek

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min