concrete pump used for sale

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump -Type: ZPH 2A/5 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 900/300/H200 mm -Weight: 15 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Yale, hydraulic pump hand pump -Type: HPS-1.7 -Pressure range: max. 700 bar -Tank capacity: 0.7 l -Quantity: 1x hand pump available -Dimensions: 720/200/H170 mm -Weight: 8.5 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Simplex, hydraulic pump hand pump two-stage pump -Type: P- unfortunately no exact type designation -Pressure range: max. 10000 PSI 689 bar -Tank capacity: l -Quantity: 1x hand pump available -Dimensions: 740/200/H150 mm -Weight: 8.7 kg

Pump control for centrifugal pumps, high-pressure pumps, water pumps, multi-stage vertical centrifugal pumps, control units, comfort control technology -Manufacturer: Wilo, control unit with control board / control card -Control device: Type CR system -Control card/board: 7022034.3 CR-LP-N 002 008 008 -Shipping/Price: complete -Dimensions: 270/230/H90 mm -Weight: 2.1 kg

Fuel gauge, oil pump, oil dispensing system, oil station, fuel pump, tank data recording, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Volume flow: 1 to 10 l/min -Engine: Hanning 0.55 kW -Pressure vessel: volume 2.8 liters -Individual components: see photos -Number: 2x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/piece

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Ilmvac, Vacuum pump rotary vane pump -Type: 302313-02 P 12 D -Drive: ATB 0.55 kW / 1320 rpm -Suction capacity: 11.0 m³/h -Dimensions: 480/220/H265 mm -Weight: 28.4 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric high lift truck Linde L 12 -Hydraulic pump: Type A5088869 -Motor: 24 V 2.2 kW -Hydraulic tank -Dimensions: 305/157/H540 mm -Weight: 11.6 kg

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Thomas, Rotary vane vacuum pump -Type: VTE 10 27740125 -Drive: 0.35 kW / 2700 rpm -Vacuum: 150 mbar -Flow rate: 10 m³/h -Dimensions: 265/160/H155 mm -Weight: 10.2 kg

Filter testing, filter test system, filter measurement system, filter test system, dosing pump double generator -Manufacturer: Science Purge, Double Generator Dosing Pump with Accessories -Type: SC 1801 -Individual components: see photos -Submission/Price: complete -Dimensions: 430/300/H305 mm / 225/175/H165 mm / 410/340/H185 mm -Weight: 11.1 kg / 1.5 kg / 6 kg

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multi-stage vertical centrifugal pump -Type: CDMF5-7FSWSC -Motor: 1.1 kW / 2870 rpm -Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l/min -Pressure output: 2.5 bar -Pumping height approx. 25 m -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inner diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -Flow rate: 12 l/min -Self-priming: up to 1.5 m (when dry) Liquid temperatures: 7 - 54 degrees -Pressure: 1 bar during continuous operation -Amperes: 2 A -Connection: 24 Volt DC Quantity: 1 piece available -Dimensions: 220/120/H160 mm -Weight: 2.7 kg

Manufacturer: Proteus, Type: 2 K und Wasserbasierende Mischanlage, Year: 2005, 2 K Mischanlage: yes, Steuerungsanlage für Mischverhältnisse: yes, Füllstandsüberwachung: yes, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Durchflussbereich l/min: 0,8-3,0, Kolbenpumpen gesamt: 4, Kolbenpumpen 1: 30-150, Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Kolbenpumpen 2: 3 Stück , Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Luftverbrauch bei 6 bar: yes, Schallpegeldruck db/A: 69, Laquer system - airless: yes, FREE TEXT: ohne Pistolen, Year :2005

FI-FI PUMP MOTOR 60HZ 690 VOLT SIZE 450 , MARINE CERTIFICATE

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101 Vibration frequency: 0 - 300 min⁻¹ Heat output: 1500 W Temperature range: Up to 100 °C W×D: 480×487 mm Included: Polyvap R-12 Rack (120ml) A condensing unit and flask A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

Stock number: PT1570, In stock: Yes, Amount in stock: 1 pc., Item: Lobe pump, Construction: Stainless frame on wheels, Motor: Variable speed - 1,35 kW - 220/350 Volt, Horizontal throughput: Ø 1½, Manufacturer: Ibex, Model: MOG 1015

Pneumatic diaphragm pump with pressure multiplier. New equipment

Edwards E2M1.5 Vacuum Pump Model E2M1.5 Manufacturer Code: A37122919 Final pressure manufacturer: 1 × 10-3 mbar Ballast gas I: 8 × 10-3 mbar Oil Capacity Range: 2,000 × 10⁻4 m³ to: 2,800 × 10⁻4 m³ Maximum Continuous Outlet Pressure: 1,500 × 10⁵ Pa Weight: 14 kg Noise level: 55 dBA, 50 Hz External dimensions (W) x D x H: 35 x 20 x 25 cm Raised Limit Void: 480.0 x 10-3 mbar. (0.48 mbar) With new oil changed on 11-09-25 with filter

Millipore Milliflex PLUS MXP PUMP 03 Model: MXP PLUS 03 With 3 microwire adapters 3 Filtration Pumps (Milliflex Plus) 3 x 24 W

KNF N035.3AN.18 IP20 Vacuum Pump New equipment in its original packaging Year of manufacture: 2021 Technical features: Vacuum limit: 13 mbar abs. IP20 Pump Head Aluminium Membrane: Neoprene (CR) Flap: Stainless steel Voltage: 230 V, 50 Hz Current: 1.55 A Power: 270 W Pump Flow Rate: 30 l/min Dimensions: 323 x 250 x 222mm

Okta 6000 - New und with Motor Okta 1000 - neu without Motor 1. Pfeiffer Vacuum Okta 6000The Pfeiffer Vacuum Okta 6000 is a Roots vacuum pump (also known as a Roots blower or vacuum booster). It is designed for industrial applications that require high pumping speeds in low and medium vacuum ranges.Primary Function: It acts as a booster to increase the pumping speed of a vacuum system, usually paired with a backing pump (like a rotary vane or screw pump).Performance: It has a nominal pumping speed of approximately 6,000 to 7,300 m³/h. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

M. No.: 02022348 Equipment / Additional information: 50 Hz 140 m³/h 60 hPa

Stock# U2473-3 Used bi-wing /lobe pump by Pomac (NL) model PLP 3-3. Contact parts designed in stainless steel (316L). Pump has horizontal location of inlet and outlet, each with diameter 76 mm / 3". Output up to 1 l per rotation of rotors. Maximal output up to 45 m3/h, with maximal rotation of lobes up to 750 rpm. Working pressure up to 15 bar. Currently pump is equipped with Lenze GST06-2M-VBR-100C32 drive, with el motor 3 kW, 230-400 V, 50 Hz. Working rotation of lobes up to 145 rpm, working pressure up to 6 bar. On current drive pump can reach output up to 7 m3/h. Pump is mounted on stainless steel plate.

Teikoku Canned Motor Pump BA61 Manufacturer: Teikoku Electric Mfg. Co., Ltd. (Japan) Sales: AxFlow AB, Stockholm, Sweden Model / Type: BA61-116J4BL-050611V-F Serial Number: FC-1236A-2 Date of manufacture: July 2010 Performance data: Lifting height: 50 m Flow rate: 18 m³/h Frequency: 50 Hz Voltage: 400 V Power: 11 kW Current: 23 A Number of poles: 2 Degree of protection: IP65 (IEC 60529) Operating mode: S1 (continuous operation) Ambient temperature range: −15 °C to +40 °C Location: Kusel

Stock number: PM1577, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Motor: 2,2 kW - 163-975 rpm., Theoretical capacity: Max 4500 l/h, Dimensions: L 1300 x W 300 x H 550 mm., Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SH40R8

VISCO JET MOTOR WITH PUMP  SSG FIMETT, ADLF 5X18 MULTISTAGE PUMP C/W 4KW MOTOR,4POLES AND 50HZ PLEASE CONTACT FATIMAH (+60136287197) MALAYSIA NUMBER LOCATED AT F25

Plunger Pump, High Pressure Pump, Homogenizer, Plumger Piston Pump, Plunger Piston Pump Manufacturer: WOMA Apparatebau GmbH Type: 753.50 max pressure 150 bar Flow rate approx. 175 l/min Engine Power: 55 kW 1500 rpm 380/660 volts 50 Hz Dimensions approx. 1800 x 1000 x 750 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Riggs 1000 Transfer pump 2012, stainless, filling range from 125ml to 1200ml, they pump directly from cooking kettles, tote bins, mixing vessels or IBC, provide damage free transfer of hot or cold liquid, semi liquid and suspended solid products

Grote 16L Heated butter pump 2013, stainless, 16L heated butter pump, agitated hopper, discharge screw, mobile, 3Ph

Liter per hour: 30000 pump type: Centrifugal pump electrical power supply kW: 15

Omac B440 Lobe pump Stainless, durable and efficient lobe pump, complete with 3Ph Seipee motor, 1475Rpm, 15Kw motor, on stainless skid, 120mm inlet and outlet, on mobile stainless skid

Special water-to-water heat pump from Bartl Apparatebau with tolerant coaxial heat exchanger for well water Type WB 4 CF/W with 13 kW heating capacity also suitable for brine operation very solid technology, very differentiated control options via external software Trouble-free operation since 2010 will be available in June, when the change is organized The private sale takes place under exclusion of any warranty and guarantee. If you have any questions or are interested, please feel free to contact us. Only to self-collectors!

Stock number: PM1524, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Motor: 1,1 kW, Theoretical capacity: 3500 l/h., Manufacturer: Mono, Type: SJ 500

Stock number: PM1553, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Barrel pump, Bar: Ø 50 x L 1000 mm., Motor: 1,1 kW - 220/380 Volt - 900 rpm., Manufacturer: Flux

Stock number: PJ197, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Impeller pump, Construction: Mounted on foundation, Connections: Ø 1, Motor: Air driven - Variable speed and capacity, Manufacturer: Johnson, Type: 10-2.001-C

Stock number: PJ217, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Impeller pump, Construction: Mounted on foundation, Connections: Ø 1, Motor: Air driven - Variable speed and capacity, Manufacturer: Jabsco, Model: 10-2.001-C

Stock number: PT1012, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Lobe Pump, Motor: Variable speed; 0,75 kW - 220/380 Volt - 58-348 rpm. , Theoretical capacity: 200-1200 l/h., Manufacturer: APV Crepaco, Model: R2R, Other: Horizontal flow - Rubber lobes

Data from the nameplate: Type: MM 1252 AV Item No.: 1000805015 Voltage: 250/300 V Frequency: 50/60 Hz Flow rate: approx. 100 m³/h Final pressure: 100 hPa (≈ 0.1 bar absolute) Year of Make: 2010 Made in Germany

Krumbein TMTP Dough Mass Pump The TMTP pump is intended to convey decreasing masses from a stop boiler or similar boilers The dough mass is conveyed via a conveyor hose into other containers or into the mold to be filled The device can be moved vertically and can therefore be immersed in the respective mass container It can be used in continuous operation as well as in individual dosing operation, single operation at the touch of a button mobile on castors 380 volt high-voltage current made of stainless steel framework Dimensions: Length: 800 mm Width: 800 mm Height: 1800 mm Weight: approx. 50 kg

Netzsch NM 105.2S prograssive cavity pump 30kW 70m3/hour 12bar.